Im a rotary guy at heart, So I always cry a little with swaps like this, but at the same time, I always love seeing a FB go fast. Love the car man, I look forward to seeing how fast you're able to push it.
Bro I’ve been watching you since for ever!! Alls we want is content you could show us customer builds or what ever. I like the content you produce and will continue watching until UA-cam dies or you quit
So I am building a 62 Falcon with a single turbo LS. I was thinking of going motor plates instead of solid motor mounts. If you go motor plates, how did you match the thickness of the motor plate and move the balancer out to keep the belt aligned? Awesome build and awesome car!!!!
Everytime you bring someone in to help it's good content. I'm excited to see more! I followed a bone stock Gorgeous pale yellow GSL - SE almost the whole way home today geeking out. Beautiful car man, and your work is the cherry on top.
Also, I'm pumped to see how the build goes with the aluminum block. I'm willing to bet this RX7 (and I owned an 84 with an 11A), is going to soon run 8s or maybe even 7s!
Excited to see this think move next season. I work in the solar industry, but aspire to open my own shop one day. With that being said, as an aspiring fabricator, I’d love to see you do some welding tech/education videos in the off season! I’d love to get some tips and tricks from a skilled welding vet like yourself. Might not be the most exciting for some I guess. But I’m sure the real car guys would appreciate
Thanks for dropping a video. Always love the updates on the 8 rotor. And Kyle hasn't put out a video in a week. And Brent has been cranking out Sho Nuff videos but didn't put one out today. So thankfully you did. 😁👍
On my first gen, going from cast iron block to aluminum block raised my front end 1 inch on the stock front coil springs. That 100 pound difference is huge!
Do not forget about treating your fuel before storing it put some stable on it and run it for a few so you don't want to go through and have to clean your injectors and all that crap when you bring it back out
Meticulous Metigulous pays off in the end! Maybe do a compression test to see if that happened on any other pistons. Hopefully that issue has not replicated in any of the other cylinders.
You unlocked a new secrete. If there was a gnarly vacuum turbine on the block you could blow more air through the thing with the gap. Itll be more like a jet engine with your massive turbo.
Wonder if there's a chance the piston got dropped or knocked against something or maybe if a ring broke the land when it was getting tapped into the bore. Either way, good stuff man!
Damn Hayden, I can't believe this thing made 990 whp on a piston with cracked ringlands! You definitely lucked out that it didn't warp or score the cylinder wall. I would've figured that you would've had to re-sleeve that engine.
Be careful if you have water in the coolant system I know that you know your whole system will freeze up and that ain't good for the radiators or the motor
I’m pretty sure you already know this, but I have seen this done in the past completely by accident, put coolant in it while you store it for the off season. Just my .2
The more oil you run the worse it is for the windage, it hurts power big time. Just call Moroso and get one of their pans. My buddies work there, they sell the cheap China pans but with their own pickups, and they make really good fabricated pans with full baffles. Watch the engine masters episode about oil control, they picked up big power just by switching to a Moroso pan, plus better oil control
Dam , smashed the ring lands cause Detonation looks like some of the WRX pistons I've seen. Dam you can hear audible Detonation it's not gonna last long and it will be the same problem pistons ring lands
Sean and Todd teaming up with Metigulous! Gonna be some badass work coming out of this shop.
Dude please upload more, 👍👍👍👍👍👍👍👍👍
Bro, you got Sean and William working for ya, so please get more videos out
"What do you guys want to see?"
I appreciate any and all fabrication work being shown.
More of the beauty welds that you do for customers would be great content. And, of course, more Lucy & Jupiter!
I agree showing some of the work you do for other customers would be better than not doing anything
Just heard the news congratulations Hayden! fabs reunite welcome Shawn and Todd this should be exciting...!
Im a rotary guy at heart, So I always cry a little with swaps like this, but at the same time, I always love seeing a FB go fast. Love the car man, I look forward to seeing how fast you're able to push it.
i would be less annoyed if he had put a diesel in it!!
Bro I’ve been watching you since for ever!! Alls we want is content you could show us customer builds or what ever. I like the content you produce and will continue watching until UA-cam dies or you quit
If you are keeping it outside, did you drain the block???
Now there isnt as much blow by will it need tuning again?
I can’t wait for you to race Kyle lol
What’s the build in the engine pistons and rods and heads? Love the progress
What’s going on with Sean and TwinTurbo Todd?
Car looks awesome with those big ass slicks an skinnys up front
Adding Shawn is huge. I hope to see more of your channel.
Just more consistent videos. The content is always there. You just have to take the time to film and post it! Love the vids as always brother!
Maybe you could show us any fun welding jobs ya get in or any other customers work of they was cool with it, that would be decent winter content
You should go to Florida and build cooper's cage in Chip.
Your custom jobs are fun to watch, also throw in some fun! For yourself. If you're having fun it comes through on the camera.
So I am building a 62 Falcon with a single turbo LS. I was thinking of going motor plates instead of solid motor mounts. If you go motor plates, how did you match the thickness of the motor plate and move the balancer out to keep the belt aligned? Awesome build and awesome car!!!!
The Subaru classic. Glad you caught it as early as you did. Man I love watching you guys pfi and boostedbois when I cook
Stop fucking around chaseing perfection, time to get some time slips banked!!
This car is looking so good and can't wait to see you pull it out next season! Make some welding videos in the meantime!
Show your work projects in the off season. I think that would be cool😁
Would you drain the water in the cooling system while its parked in the trailer so it doesn't freeze? or does it not get that cold there?
Everytime you bring someone in to help it's good content. I'm excited to see more! I followed a bone stock Gorgeous pale yellow GSL - SE almost the whole way home today geeking out. Beautiful car man, and your work is the cherry on top.
Also, I'm pumped to see how the build goes with the aluminum block. I'm willing to bet this RX7 (and I owned an 84 with an 11A), is going to soon run 8s or maybe even 7s!
12a*
Is the ring gap big enough? Ring end run in is what's causing this
Excited to see this think move next season. I work in the solar industry, but aspire to open my own shop one day.
With that being said, as an aspiring fabricator, I’d love to see you do some welding tech/education videos in the off season! I’d love to get some tips and tricks from a skilled welding vet like yourself.
Might not be the most exciting for some I guess. But I’m sure the real car guys would appreciate
Always doing clean work in a clean shop!!
Thanks for dropping a video. Always love the updates on the 8 rotor. And Kyle hasn't put out a video in a week. And Brent has been cranking out Sho Nuff videos but didn't put one out today. So thankfully you did. 😁👍
What did you use to notch the pistons for the valve
Wake up
Is that the iPhone 13 cinema mode? 😯
Cars looking and sounding amazing bro take your time it will all come together
Just wondering what ha e u guys done with Charlies old civic
I want to see the work you do for customers, It aint got to be a very in depth video, just like, a 2minute build blog here and there
Its all about goals man😎. keep going forward!
Killing it Wyatt. Any vids are better than nothing
Take the battery out & keep it on trickle to be good for summer.
When will you make a video introducing Shawn and Todd and will they do a tell all on why they left
Customer car builds combined with your car!!
give us a todd and shawn update video
Keep on moving forward and don’t look back
On my first gen, going from cast iron block to aluminum block raised my front end 1 inch on the stock front coil springs. That 100 pound difference is huge!
Shawn's a beast, I can't wait to see what you two create!!
Show some builds/work etc is always interesting fab work
I think Texas speed needs to sponsor you. You e got a great channel you help so many people and a Texas speed unit in there would be epic
Do not forget about treating your fuel before storing it put some stable on it and run it for a few so you don't want to go through and have to clean your injectors and all that crap when you bring it back out
Meticulous Metigulous pays off in the end! Maybe do a compression test to see if that happened on any other pistons. Hopefully that issue has not replicated in any of the other cylinders.
First grandpa is fast. 🤣
Title in the notification confused me but then I remembered who’s channel this was
I know… dude doesn’t post vids ever
Don't worry Dutch, he's got a plan.
If it sits for a long time it is good meassurs to pump up the tires a bit higher so they stay nice and round
Trying for a home in Colorado or Florida, just wondering??
Is there coolant in the RX7? Ik it sounds stupid but racecar
You unlocked a new secrete. If there was a gnarly vacuum turbine on the block you could blow more air through the thing with the gap. Itll be more like a jet engine with your massive turbo.
Another great episode.
Wonder if there's a chance the piston got dropped or knocked against something or maybe if a ring broke the land when it was getting tapped into the bore. Either way, good stuff man!
Happy New Year 🎆
Hi I want to purchase some docol r8 steel can you please advise me where I can order some thanks
You do great work. Love your attitude
What pistion and rods are you using? Are they stock pistons and rods or forged?
Damn Hayden, I can't believe this thing made 990 whp on a piston with cracked ringlands! You definitely lucked out that it didn't warp or score the cylinder wall. I would've figured that you would've had to re-sleeve that engine.
resurrect Charlie's wago for snow drifts!
I wanna see your customer projects
Be careful if you have water in the coolant system I know that you know your whole system will freeze up and that ain't good for the radiators or the motor
Thinking the same . !!
Honda time! Get the CRX back together.
Ayo my boi where you at ? We need more videos
More regular content coming soon?
Just keep on showing your Awesome skills.We'll be here.>98K !
I’m here for the ideas but idk what you talking about Willis 😅😂🤣
Truck tires on the rear and some snow drifting shenanigans
Move to Florida
Keep it up Man U r awesome at what u do u will find a way to make UA-cam what u want and make a living at it just keep doing it.
Mexico runs. Like the og boostboiz content that brought in all their subscribers.
Customer Stuff - Cages, manifolds fab stuff whatever dude post it up!
You should take the RX-7 ice racing it would be cool because you would be one of the only people that got to make a pass on ice and the drag strip
Let the rings get seated and it shouldn't have hardly any blow by at idle.
Don't leave the shocks and springs with ratchet straps pulling down on them all winter.
Is that a 6.0 engine ?
Yo dude make sure you top up your coolant or drain the water as you don't want to crack your block while it's freezing in the trailer
Just do u man, keep on doing what u do just record it, lol..
When you going to post again
It’s already been said but….just share some of the busy work you’ll be doing 👍🏼👍🏼
Build some cool snow bikes or somthin. Engines. Tires or tracks lol go-karts. Anything that goes
I’m pretty sure you already know this, but I have seen this done in the past completely by accident, put coolant in it while you store it for the off season. Just my .2
Update.. where you at
Got that discount tire torque wrench lol
Hayden we miss you lol
Please put a good aftermarket dampener on it, also single 90/10s will be fine for the front. You don’t need anything crazy
We want to see content whatever that maybe customer cars is cool too
Oh yea boi!!! That is nutty man, just means you got more eggs in your basket haha
Miss your content bro
She got antifreeze in it?
Ever think of narrating a time lapse vid of your customer work?
that setup looks so dope...it's almost a shame you have to put a bumper and hood on it lol
Post whatever you can about customeer work
Shh, it's a cracked "rotor." 😏
The more oil you run the worse it is for the windage, it hurts power big time. Just call Moroso and get one of their pans. My buddies work there, they sell the cheap China pans but with their own pickups, and they make really good fabricated pans with full baffles. Watch the engine masters episode about oil control, they picked up big power just by switching to a Moroso pan, plus better oil control
Dam , smashed the ring lands cause Detonation looks like some of the WRX pistons I've seen.
Dam you can hear audible Detonation it's not gonna last long and it will be the same problem pistons ring lands
Where is the crx?