While Kyle and Wyatt were gone you were able to get some work done on your hot rod. Your always helping with everyone else's car like a cool bro.Awesome your this close with yours, now I can't wait to see it on the drag strip.
Super stoked to see this thing driving again! Makes sense the suspension geometry was good judging by how well it hooked and straight it went last time on track even though it's new parts. The engine seems to be running mint as well. Everything is coming together! HELL YEAH!
Glad to see the RX 7 together. It's been a long time coming. Hope you really enjoy ripping it at the track. I don't think you have anything for the MR 2 but give it hell.
Not right now but if he puts a good amount of time and effort into making passes.. he’s talking like its gonna be on a lot of no prep and street surfaces but it’s gonna be a rocket on some glue for sure. I’m excited to see how far he can push the stock bottom end. He’s not gonna put it on the Dyno but if he wanted to make it last he could get with someone like squirrel tuned to get a really good idea of what he needs to do.
Damn dude finally it’s back! You built a really bad ass hot rod over the past few years, can’t wait to see what it runs at the track once you get it all dialed in!
For the toe, an easy to remember thing! Toe In the high side. So if the left side of the wheel sits high. Toe in the left. And Toe out the right the EXACT same amount and it will NOT change your total toe:)
10 years same on the 92 FD...98% done but when it came to cutting the front of the R1 for intercooler I said nope. Now Im building 6.2 hi rev so I can always revert back to Doritos and sell if need be. I enjoyed the vid.
The roads in Florida have a crown on them so rain drains to the right side of lane thus is why u have to turn slight left to go strait.any good alignment shop will align for that . or u can solve with a couple pounds of air pressure in right side tires. from a Florida man.
can't wait to see that match up you and kyle lol been watching since before the cage video it's been a long time coming bro! im happy maybe not as much as you but to see what it has become and got to!
Man I'm stoked to see your car driving again, and you being able to enjoy 2 years of work. Hope you be able to enjoy it for a long time and make some killer passes in it! Greetings from Holland 🙏
Great job man Really shows the love you put into your ride Also I am at the point in my sa22c rx7 with the rear end with the gear lash and know nothing about it I am so glad to see you work through the problems Your car has come a long way
build is looking sick man! hey just a lil tidbit i do when im using an offset on a tape measure (carpenter) i offset it to 12" because most tapes have another set of numbers that start over from 1 at 12"
U just turned your dream into reality. I salute u bro. Now go and enjoy your car bro the world is happy for u getting so much done in such a short time.
We all know how project cars go, we all have a plan, wants, and high hopes. What we think will be a few weeks turns into months and then years. I'm pumped for you dude, I know you having built it you probably can think of 100 things you want to change but let me tell you that you have a badass setup. Only thing to change is that engine, I know you have plans for it so I need not say more.. Keep up the solid work and cant wait to see you do a full rip in it🤙
That intercooler pipe is sick AF! The car is going to be a monster once you get everything dialed in! Congratulations on getting it done! For now at least 😂
I dont ever comment on this channel but i just thought id say the rx7 turned out so amazingly beautiful all the work you've done is top quality. Now to race kyle😅
I’m super excited to see you finally get to make some passes down the track and hopefully at Rocky Mountain race week! Race week is a mfer but you never know!
Done many of those alignments when I was a tech for the Mazda mx5 cup. Make sure to add your weight to the driver seat to make it more accurate. Love the content and keep up the grind man.
Dude it's easy. All u need to do is put shim on the pilot gear to bring the gear in further. Drop the driveshift and take the nut off the yoke and pull the gear ⚙ and put the right shim on it to bring the gear closer. Put everything back together and test it again. If it good put the driveshift back in and ur good.
Almost at 100k my dude!!
You and wyatt said your rides would be ready for ice cream cruise two years ago but at least you got yours finished now its your turn wyatt.
You must not have a sub 12 second car or own a shop. Both will sometimes tell you what they're gonna do! Lol
last time it was out was ice cream cruise 2019! 💀
@@whoknows3347 1/8 mile no prep car. Can’t get races if you have a funny car cage
Unfortunately life happens not to mention Covid and it’s 99% survival rate🥲
It was at icc in 2019. I was there at Werner park.
Where’s my dawg at?
Man seeing those giggles and that big smile makes all that hard work worth it. Keep it going brother. Miss this content you put out.
That smile on your face when you took it for a drive man! So stoked for you to be this close to the finish line on your hot rod
Same it made me so happy. So much work finally coming to fruition
@@imdabeast100 so happy I could shit…
Amazing build dude. Yea it's takin two years but your a one man show. Super sick man
It’s so good to see you smiling and happy driving. You have spent so much time on the car so now it’s time to enjoy it 🤙🏼
While Kyle and Wyatt were gone you were able to get some work done on your hot rod. Your always helping with everyone else's car like a cool bro.Awesome your this close with yours, now I can't wait to see it on the drag strip.
Super stoked to see this thing driving again! Makes sense the suspension geometry was good judging by how well it hooked and straight it went last time on track even though it's new parts. The engine seems to be running mint as well. Everything is coming together! HELL YEAH!
Can’t wait to see some passes. You’ve put in a ton of work, it’s been a fun watch to see how far the car has progressed.
Good luck tomorrow my ninja!!!!
Hey Carlos if that comes before Thanksgiving I’ll just bring them out.
this chassis/motor/trans combo is the recipe to go insanely fast, would love to see a 7.XX with that stock bottom end
@sabrina sancez hey bae
Man I thought you were gonna give up, but you pulled through and thank god you did because old 8 rotor is turning out awesome!
I missed this car ! Can’t wait to see how it does
Glad to see the RX 7 together. It's been a long time coming. Hope you really enjoy ripping it at the track. I don't think you have anything for the MR 2 but give it hell.
Not right now but if he puts a good amount of time and effort into making passes.. he’s talking like its gonna be on a lot of no prep and street surfaces but it’s gonna be a rocket on some glue for sure. I’m excited to see how far he can push the stock bottom end. He’s not gonna put it on the Dyno but if he wanted to make it last he could get with someone like squirrel tuned to get a really good idea of what he needs to do.
You need to do your Winters in Florida
Damn dude finally it’s back! You built a really bad ass hot rod over the past few years, can’t wait to see what it runs at the track once you get it all dialed in!
What a change from the first time I saw this car. Wow. We’ll done Haiden.
Nice job checking the lash bro ! You can't be too careful
11:57, love the seat belts and the safety of driving on the streets and doing some light pulls 💪👌👍 13:23 good thing breaks feel pretty good tho
Glad you convinced Kyle to offset that bar 4”. Can’t wait to see you guys finally race. Hope the mr2 doesn’t blow a rod again!
The mr2 never threw a rod with a built engine though that was way different circumstances lol
@@freedomfox8183 yeah the rx7 is more likely to toss internals.
12:58 finally being back in your car after an extended upgrade period is a pretty good feeling XD
Every Inch does count bro wish I could gain 2
Ya I guess that’s true for you short asses,!!! 🤣😎
Hey man Catherine up there ^^looks interested anyway
We miss you Carlos and your beautiful cars mate !!! Would be nice to see you in more vids !!! Peace ✌️ 😜👍🇦🇺
I can’t wait to see this thing make some passes. Have fun with it Hayden you deserve it
Good to see all the ogs together and happy to see u get the car back going now let’s see it kick some ass
Bro I think you should move here, you know it's awesome here. Year round drag racing n fun!
For the toe, an easy to remember thing! Toe In the high side. So if the left side of the wheel sits high. Toe in the left. And Toe out the right the EXACT same amount and it will NOT change your total toe:)
Eyeball alignment got you close, now spend the $80 and get it on a laser rack at a minimum if this thing is going 160+
Race teams use strings to set up their cars because its more accurate that machines if its don't properly
10 years same on the 92 FD...98% done but when it came to cutting the front of the R1 for intercooler I said nope. Now Im building 6.2 hi rev so I can always revert back to Doritos and sell if need be. I enjoyed the vid.
Great work Hayden. !!
So very Exciting 😊 to see..we've missed it too.
Hayden I feel bad for calling her a garage queen last winter. I’m proud of you bro, you’ve built something to be proud of. 😎 😎 🤘
The roads in Florida have a crown on them so rain drains to the right side of lane thus is why u have to turn slight left to go strait.any good alignment shop will align for that . or u can solve with a couple pounds of air pressure in right side tires. from a Florida man.
It's a shame Kyle won't help you get over 100k with his million subs....a little shout out wouldn't hurt him😆🤙 congrats your almost there ✌️
Sweet bro, wish I had your skillz!!
can't wait to see that match up you and kyle lol been watching since before the cage video it's been a long time coming bro! im happy maybe not as much as you but to see what it has become and got to!
The rx7 seems to put the power down real smooth. Congrats hayden
Man I'm stoked to see your car driving again, and you being able to enjoy 2 years of work. Hope you be able to enjoy it for a long time and make some killer passes in it! Greetings from Holland 🙏
Just remember that the roads have a crown for water drainage so your alignment probably closer than you know.glad to see it's done good job buddy.
Great job man
Really shows the love you put into your ride
Also I am at the point in my sa22c rx7 with the rear end with the gear lash and know nothing about it
I am so glad to see you work through the problems
Your car has come a long way
So mr jonny bravo. When moving in with the boys
Dude brad is awesome! Snake eater FTW! Currently running the 1500s ZERO complaints
Good work dude ur work is legit .. glad to see the rx7 back in action looks like a ripper n competition for mr2s
The car is looking good 👍👍🇨🇱
Congrats! You should be really proud. Awesome build and you did most of it by yourself. 👍
build is looking sick man! hey just a lil tidbit i do when im using an offset on a tape measure (carpenter) i offset it to 12" because most tapes have another set of numbers that start over from 1 at 12"
cant wait to see it make a hit on the best prepped track in America BMP
Time and hard work paying off . Keep posting stay focused.
Happy to see that smile when you drove it.
Hey man, haven't watched in a few years and stumbled upon your channel again, you're looking good from when I remember!
Haha yes. That smile after it came on boost. Pumped for you Hayden
U just turned your dream into reality. I salute u bro. Now go and enjoy your car bro the world is happy for u getting so much done in such a short time.
Hell ya congrats bro its gonna b flying at the track can't wait
That charge pipe is sick af! I've been watching you for years bro before Kyle's first MR2 engine blew up when it was original lol.
Ayyy my fav two lesbians Wyatt and Hayden 😀. Been waiting to see this thing finished broski can’t want to see her run 🏃♀️
It looks and sounds amazing great job man you’ve definitely been working hard
Hell yeah. Excited to hear the reference to Tin Soldier Race Cars on here. I went to their shops Open house party Friday night.
Looks great man. 👍
solid video.
We all know how project cars go, we all have a plan, wants, and high hopes. What we think will be a few weeks turns into months and then years. I'm pumped for you dude, I know you having built it you probably can think of 100 things you want to change but let me tell you that you have a badass setup. Only thing to change is that engine, I know you have plans for it so I need not say more.. Keep up the solid work and cant wait to see you do a full rip in it🤙
So great to see you driving that monster finally! Excellent job my man. Now go get them 7's!
LETS GO!!!
Good job man I'm glad you took your time with it and did it right it looks like a show car I can't wait to see you at the track
I am happy to hear that v8 rumble i can't wait to see more on it
HERE WE GO GUY'S
CAN'T WAIT TO SEE
THIS BABY RIP ,,,
LOVE THE CAR 🚗
This channel is about to take off once the rx7 racing content starts dropping
Horsepowers convert to large smiles!
Congrats my dude! Long time coming and it's looking sick.
Dont need no alignment where those front wheels are going!
To measure the distance between center points take your pinch dimension plus half of width/diameter of each object/circle your measuring from
Hell yeah buddy I’m ready to see this thing rip it’s crazy how much you “upgraded” it since the last pass and it was rippin then
It’s so nice to see you happy with all the work and effort you put in. Good Job on the long journey with this build 👍🏻
congrats dude. its been quite a while, now wyatt needs to get the truck together.
Quality work bro 👏
Baddass job on the mr2 buddy… so glad to see you posting again man love your channel
I’m soooo hyped your car is back and driving
Can’t wait for the track day video 🙌
Glad to see you driving, killer job
Man you worked way to fucking hard for this. I can't wait too see your work put down to the pavement.
That intercooler pipe is sick AF! The car is going to be a monster once you get everything dialed in! Congratulations on getting it done! For now at least 😂
Awesome.!! Can't wait to see some track videos.!! 🤘
The pivot point of the control arm and inner tie rod being that way is perfect and exactly how to set it up with the least amount of bump steer
Just curious why you didn’t stagger the front.
I dont ever comment on this channel but i just thought id say the rx7 turned out so amazingly beautiful all the work you've done is top quality. Now to race kyle😅
That was a really good upload dude! Thank you!
Love to see it! Nice to see it back out, but put your dam seat belt on!
Bro!! I can’t wait to see that thing start to eat!!!💪🏼🔥🔥🔥👍🏻
Man soo awesome cant wait to see it make its first pass its been a long time coming 🍻
Glad it's back. Hope it stays together for a while this time
That thing is going to launch so hard you should wear a safety collar.
Crazy how many years we have been waiting to see this beast run against the mr2 😉
I’m super excited to see you finally get to make some passes down the track and hopefully at Rocky Mountain race week! Race week is a mfer but you never know!
Love this fb 🇦🇺🙋♂️ kinda wish u did Ti dumppipe but
Modified the wheelbase?! Fuckin pro mod!
Where is the CRX updates at? I want to see a series for that car
Done many of those alignments when I was a tech for the Mazda mx5 cup. Make sure to add your weight to the driver seat to make it more accurate. Love the content and keep up the grind man.
Congratulations brother
So pumped! :D Congrats, it was one hell of a journey
Happy for you bro!
Setting the lash between gears is easy once you know what you're looking for
That Johnny Bravo hair though!
Dude it's easy. All u need to do is put shim on the pilot gear to bring the gear in further. Drop the driveshift and take the nut off the yoke and pull the gear ⚙ and put the right shim on it to bring the gear closer. Put everything back together and test it again. If it good put the driveshift back in and ur good.