Hello, I own a 2006 Accent 1.4. My gasoline LPG vehicle runs between 1.1 and 1.2 at the first start-up. As it warms up, it drops to 1 level. When I turn on the headlights or the air conditioner in my vehicle, the speed fluctuates and it drops to 0.6-0.7 levels. When I turn it off, the speed reaches 1 level again. If I replace this part, will my problem be solved, thank you. Check engine p0507
Hi there, is there any other fault code too? Normally when you get this code when there is no idle air control valve, problem code be coming from the throttle body itself. However having any problem or blockage in air filter or throttle body inlet can cause very same fault too.
@@AutomotiveDiagnosisThanks for the response. The codes are P0506 (low rpm) and C1688 (VSM2 MDPS Signal Error, abs system). I cleaned the throttle body, but my car still stalls and stops at red lights. Could it be a sensor?
This video shows everything I need, I love the way you explain the wiring diagram in each DTC Guide. Thanks
Thanks for your feedback
Hello, I own a 2006 Accent 1.4. My gasoline LPG vehicle runs between 1.1 and 1.2 at the first start-up. As it warms up, it drops to 1 level. When I turn on the headlights or the air conditioner in my vehicle, the speed fluctuates and it drops to 0.6-0.7 levels. When I turn it off, the speed reaches 1 level again. If I replace this part, will my problem be solved, thank you. Check engine p0507
What spray are you using to clean it??
I used throttle body cleaner
Will this code cause a misfire at idle?
Sometimes at idle it may cause random misfire but that's not very common, mostly it stalls the engine.
Tq for uplod vdeo
Thanks for watching
Best
👍
I have a 2015 Elantra with this code and my car has no idle air control valve, so I have no idea what’s wrong
Hi there, is there any other fault code too?
Normally when you get this code when there is no idle air control valve, problem code be coming from the throttle body itself. However having any problem or blockage in air filter or throttle body inlet can cause very same fault too.
@@AutomotiveDiagnosisThanks for the response. The codes are P0506 (low rpm) and C1688 (VSM2 MDPS Signal Error, abs system).
I cleaned the throttle body, but my car still stalls and stops at red lights. Could it be a sensor?
👍👍
👍
What if i get this code, but isn't the idle control valve?
If Idle control valve is ok, it could be from the throttle body, accelerator cable or restriction in intake or exhaust
I saw another video where it was the PCV valve that fixed it for him
@AutomotiveDiagnosis thank you for your reply. Sorry for my late reply. Cheers
@@IQof2 thank you, cheers
Check pcv, check for vacuum leaks, clean throttle.