nice one .. I have been attempting to solve my sinking brake pedal on Citroen C5 saloon car .Learning to operate the Foxwell NT 630 plus scan tool has been the biggest challenge for lil old 77 yrs me . I am getting there SLOWLY . third session of ABS bleeding coming up soon .
@@PeterFinnTheCarDoctor Hi from Richard . I have resealed the master Cylinder and bought a Foxwell NT630 Plus abs bleed scan tool . Once I had got my 77 year old mechanics brain around the scanners instructions . I am please to confirm that My sinking brake pedal problems are a thing of the past . In 1980 I was the Donnington GT championship class winner .. I manufactured my own space frame chassis and Fiberglass body work . I incorporated GROUND EFFECTS into my self made race car . My car was the only car with ground effects .. I used to lap most of the opposition . All good memories .
Really nice video , I have a question , my abs pump has the connections full corrosion , some pins are gone , if I remove the "computer module" does the coils contain any oil ? Or can I remove the module from the metal block without being worried with the brake fluid ? I already think it doesn't contain any fluid but it is just too make sure
How are you sir, I have a question please... How can I install the motor indoors? I mean, how can I put the small motor back in? Because I see two pieces inside that prevent the motor from being inserted?
Sr. Peter donde consiguió el módulo, tengo el mismo el mismo problema escape 2010. Gracias ! Mr. Peter where did you get the module, I have the same problem escape 2010. Thanks
I found my front right outlet valve is stuck (not opening with nt630 obd2 reader). Am I able to clean or force the valve to be unstuck? All others are able to be turned on and off on the ABS module. Causing sinking pedal, only brakes at the end 1/4. Changed master cylinder and bled already.
I have replace abs unit for my car santa fe 2007, 2.7, 4WD, EPS, abs type s/w 60303 ver 0204. And bleed air from wheels. The problem. Is clunk sound Inside abs unit when press break at low speed. No signal abs light, the abs working good as break, the problem only the clunk sound. So please could you advice me how solve this problem. Thank you very much for your help.
Excellent explanation Peter!
May God bless you for all your helpfull explainations. Thanks
شكرا بيتر ، من أروع ما رأيت !
Great work
Thank you! Cheers!
Excellent work and information
Thank you!
Exelente video no entiendo el ingles pero tengo una idea del procedimento, saludos desde Guatemala 🇬🇹.
👍
Thank you very much Peter.....for your explanation .
You are very welcome
Have abs lite on a 95 honda odyssey abs actuator pump ?
nice one .. I have been attempting to solve my sinking brake pedal on Citroen C5 saloon car .Learning to operate the Foxwell NT 630 plus scan tool has been the biggest challenge for lil old 77 yrs me . I am getting there SLOWLY . third session of ABS bleeding coming up soon .
Hi, the sinking pedal course from bad brake caliber. Caliber moves or parts are loosen. Also brake hose could be bad.
@@PeterFinnTheCarDoctor Hi from Richard . I have resealed the master Cylinder and bought a Foxwell NT630 Plus abs bleed scan tool . Once I had got my 77 year old mechanics brain around the scanners instructions . I am please to confirm that My sinking brake pedal problems are a thing of the past . In 1980 I was the Donnington GT championship class winner .. I manufactured my own space frame chassis and Fiberglass body work . I incorporated GROUND EFFECTS into my self made race car . My car was the only car with ground effects .. I used to lap most of the opposition . All good memories .
@@richardwallinger1683 how did you do it?
thanks Peter
👍
Thank you.
Welcome!
Really nice video , I have a question , my abs pump has the connections full corrosion , some pins are gone , if I remove the "computer module" does the coils contain any oil ? Or can I remove the module from the metal block without being worried with the brake fluid ?
I already think it doesn't contain any fluid but it is just too make sure
Hi, there is only brake fluid inside.
That was a great video. Are you from Finland? You sound just like my friend from there?
Yes I am!
How are you sir, I have a question please... How can I install the motor indoors? I mean, how can I put the small motor back in? Because I see two pieces inside that prevent the motor from being inserted?
Yes
Sr. Peter donde consiguió el módulo, tengo el mismo el mismo problema escape 2010. Gracias !
Mr. Peter where did you get the module, I have the same problem escape 2010. Thanks
Noted 👍
How do you get the motor back on. Not sure what the things are that the motor pushes but they keep it from being reassembled.
Thanks 👍
Hi peter we need a video how to replace bushing in arm control
Thanks
Great ! and Thanks for comment 👍
Dobar video, bravo.
😀👍
Thanks sir
All the best
Hii can you tell me why the fluid brake not be out from aquator if we push pedal rem but other side be out...
I need your explanation, thanks verymuch
Let me check
👍
I found my front right outlet valve is stuck (not opening with nt630 obd2 reader). Am I able to clean or force the valve to be unstuck? All others are able to be turned on and off on the ABS module.
Causing sinking pedal, only brakes at the end 1/4. Changed master cylinder and bled already.
Noted Great 👍
I have replace abs unit for my car santa fe 2007, 2.7, 4WD, EPS, abs type s/w 60303 ver 0204. And bleed air from wheels. The problem. Is clunk sound Inside abs unit when press break at low speed. No signal abs light, the abs working good as break, the problem only the clunk sound. So please could you advice me how solve this problem.
Thank you very much for your help.
Thanks for comment
make a pressure washer with this pump
Noted 👍
Oke
👍
Thumbs DOWN. You never pulled the valves out. This video does not help.
Good comment 👍