BUILDING AN R36 ENGINE SWAPPED VW SCIROCCO R | PART 1
Вставка
- Опубліковано 28 вер 2024
- CAR VERTICAL - Use code 'TRH' to save 10%: www.carvertica...
The Scirocco R36 build gets off to an "interesting" start.
MY CONTACT INFO:
Instagram: / trhamza_
Email: hamza_trh@hotmail.com
Scirocco R36 gets off to an Interesting start 😂 Anyway make sure to check out CAR VERTICAL using my link and code "TRH" to save 10%! www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
I think it's sign for you to take the engine apart and tune it to 800hp
I had same problem until i used an old rubber car mat to stop it all sliding around, really interesting swap should sound lovely.
Love the honesty man, we all fuck up at one point. Can't wait for the build man!
Thanks man! Every day is a school day as they say!
You have taken this channel to a whole different level!! Love to see it💨
Thank you! 🙌🏼
Wasn't watching the vid, just listening to it, dude described how he dropped a whole engine on the floor like he was talking about the grocery list. Hamza you're the man brother, can't wait to see the rest of the build 😂
Hang in there Hamza! Shit happens and whilst annoying, on the scale of things that could have gone wrong this is minor and no one was hurt thankfully. Thanks for being so transparent and your outlook and humour is a breath of fresh air. A very inspiring build, best of luck my friend!
Mate I love your honesty, you’re by far the best ❤️ don’t let the series enddddd :)
Love your content bro.. Keep it going.. Gutted about the fall hopefully not too bad
Thanks bro! Hopefully should be ok 🙏🏼
What a headache... i thought i had it bad when i dropped a bolt into the engine bay. Hopefully goes smoothly going forward.
Heartbreaking dropping the engine but love the way you kept your cool, going to be an insane build inshaAllah 🔥
Can’t believe you haven’t got more subscribers. Nice honest UA-camr who’s entertaining.
Mate I've been binge watching your channel absolutely amazing work. 👍🏻👍🏻. Nice to watch someone who knows their stuff buddy
This scirocco R36 is going to be really special because it was built by TR HAMZA himself I mean I would buy this car now if I could can't wait to see this build at the end, lots of support from South Africa brother 💪🤝🔥💥👌
We learn as we Go Along mate……No mistake means nothing was Done…….Loving this build …Cant wait for mor content
Those engine table lifts are lethal without a rubber mat. Get yourself a couple of rubber door mats and it will make it a lot safer as it will stop the engine sliding off. HTH!
Excellent work, its fixable, keep going, well done!
Love the positivity when unexpected happen.s Love your videos mate. Also please don't forget to show and explain us what happened with the original Sirocco R engine.
Bros has an engine hoist but got a flat trolley..
Respect for showing it all and like it's been said before. You learn from your mistakes...
Really enjoying the content mate, as you are not just doing the same old shyte all the other channels are doing.
This is a really interesting project, and I'm fascinated to see the progress.
I do wish you find it in your heart to do just a little BMW content though lol, I know you are a proud Audi & VW fan, but I live in hope.
I currently own an OG M2, and I think you could do something amazing with one.
Just subscribed after watching a few videos, very good content mate. Shame about the engine falling over, fair play for showing it though mate, many wouldn’t. Can’t believe how cheap cars are in the U.K., over here in Australia Euro cars are super expensive.
In the UK cars are and have always been cheap as chips 😂. We have no nearby export market because all our cars are RHD and European cars are LHD and the Irish have to pay heavy taxes on British cars so don't take them. Most UK cars are also rusty and haven't been taken care as a lot of people just don't go beyond an MOT for the car. just walking down the street I will guarantee you will see at least one Vauxhall Corsa that looks and sounds like it's been in one hell of a war😂😂. People here also have a mentality of over 100k miles = scrap so cars with higher mileage just generally are cheap. I used to work with a lady who said that 30k miles was too high and she wouldn't buy a car with more than that💀
As long as it didn’t fall on you that’s the main thing. Metal and plastic can be replaced. Good job on the clean up 🧽.
I was creasing when you showed the engine lying there on the floor Allahumma barikh😂
Finally someone who‘s using the right tool for these clamps 👍🏻👍🏻👍🏻🤩
Good luck with everything my friend your doing a great job learning on the job is the best way because of your passion.
Thank you
Nice man good to be strate up and down about the hole job that's the way it is in a garage
Hamza use a tire on top of that trolley to help stabilise the engine when moving and protect the sump
a couple of ratchet straps might help in the future as that trolley looks a good tool
R36 gang I was looking for cars and was thinking about hamza project next min I see hella r36 about bare expensive but damn can’t wait to c the ending in this project
the vibes are impeccable, but the tragedy at the end was gut wrenching. please don't give up on this!
been there done that honestly lol the engine falling is way less scary than having the car tip off the lift lol it happens it'll buff out!!
Wahaaay when the engine came out I cheered
This guy is too underrated ‼️
your honesty is inspiring. keep problem solving!
Stay safe there! When working alone one should take extra care. Many just cost more than money next time… if it does I guess we’ll never see that episode. 👍🏻
I nearly cried for you there man 😢 you’ll bounce back
progress is better than no progress
Very nice series, another cool VAG swap :) That CC is quite bashed, atleast its drivetrain lives on :)
I see the engine dropped finally! 😁
you go Hamza. Love the vids and the approach
Love your honesty
Cheers Hamza I did have a laugh 😂. In all fairness if it was me I'd have ended up flipping the car nose in the air and catapulting myself through the roof of the building 😂
Hamza I really like watching your videos. I really like your style! I hope the engine is okay! Peace!
Bro, an R36 in a Scirocco? You are MAD and I love it! What is next....an E92 4.0 V8 in a Golf R??
Appreciate the honest content
No laughing here mate thanks for the great vids, we live and learn. Happy New year 💙
A passat cc R36 built would be awesome too.
Would love to see some of the wiring stuff in more detail!👍🏻
Chin up chap, it happens to the best of us. Keep up with the awesome content!
Exhaust hanger tool is the one trust me 👍🏽
When you're working on your own these things happen be safe love the content 😊😊
I love the way you work bro 👌🏽 good luck with your build
At least you are a big man to admit what happened but at least you are safe, great content mate
What are your power goals for this build, and what turbo would you be running ?
*I like the fact you actknowledge its a cc. so not a original R36. Some people call it the passat cc R36. Wich is incorrect, because the cc never came as R36 model. although you can get it with the same R36 engine, but that doesnt makes it a R model*
Gutted that the engine fell... Nothing to laugh at my brother
Appreciate that brother, will have a better look at it next video hopefully
The scirocco engine would be a nice swap for a vw polo from around 2002-2003
Love the content. Great video and looking forward to the rest of the build
Loving this content bro… tbh seen many using that crane to remove engine etc… sometimes learning can be expensive but hey ho this is about learning
Hamza is a OG on UA-cam
Can’t lie mate, i did laugh when I saw the engine on its arse😂
Bu makine benim olacaktı var ya ❤
Ski rocco. So excited to see the finished result
Looks good so far 😅 , I'm working in VW dealer I was thinking about this if possible or not , for sure I'm looking for the end result.
Would love to have a 5 cycl. engine in my VW Touran 2018 modell.. or at least a 2.0 tsi.. those 1.4 just do not cut it. Little bit more power in the family van would awesome to match the R Line exterior
You know where you went wrong, don't you?
You didn't give the engine a slap and say the magic words.... "That ain't goin' nowhere!"
Smashed enough sumps taking engines out on jacks to now use an interface.
Life innit.
Goodday sir… first let say thank you for the beautiful video. My question here please. Does a scirocco 1.4tsi CAV engine share the same engine loom as the Golf 6 1.4 CAV engine…. Thank you
Been waiting for this 😂
Like your lift this channels on the way up 🎉
This is a cool project
Humza what you saying to a car meet this summer? And can you ket Mr KBT know hes missed on YT 😂
Good episode 💯
Ouch hopefully it isn’t going your way cause you too many issues is it worth connecting it back up to see how it runs?
You live and learn, main thing is you didn’t drop it on a body part!
Maybe u have some and im justblind but block of wood help alot =]
Haha nice fail bro I like the enthusiasm and that you didn't get too upset nice one bro
Just out of interest where do you get your drawings or schematics from the internet??
Do you search for online etka catalogs? I use lll-parts myself.
Thumbs up, thanks in advance
Well done you've done a mans job
I have an ancient diesel ford galaxy (vw engine) if had the ££ I’d ask you guys to fit the 3.2 with auto box and 4wd
What the name of the tool for the plugs you was using ??
At least it didn't fall on your foot
Very true!
How much for your CC front lights? Mine are cracked and I've been needing a new set right side light.
What you doing with the rest of the cc top man? Love the channel always my kind of cars lol
You've come a long way from polishing the exhaust tips on your S3
Appreciate the honesty
Shit happens lol
For a second i thought the label's were bog roll😅
I can just tell you weren’t that calm off the camera 😂😂 it’s alright tho things happen.
Unlucky dude
Aslam bro when is the m5 e60 coming back
Which dewalt impact drive is that your using I’ve used so many and they struggle with even getting wheel nuts loose 😂
DCF900, I had enough with struggling and just searched what’s the strongest. This will break most things apart 🤣 But I still use my Amazon (red one) for less intense stuff. As it’s lighter too
@@TRHamza thanks buddy I need too invest in one for sure definitely looks like it makes things so much easier lol
Next time, just drop the engine+gearbox with the subframe.
Turbo charge it !!!
Leave a like and a comment to help pay for the rocker cover
Never understood why those engine lifts have such a smooth surface for the engine and gearbox to sit on. It's Lethal
The horror mate 😅
You need another human, unfortunately I don’t have one 😅
You are trying to make me do a financial mistake aswell, arent you?
Shame about the engine dropping
Hi I've been looking at doing a 4wd swap on my cc. If you're selling any parts hit me up please.
the cc punishes you for taking the engine
Hamza so chill about everything. Chillin vibes always even when shit happens ✌🏻. Keep up the outstanding work and the best content 👊🏻
Thank you 🙌🏼 Everything happens for a reason just gotta take it on the chin!