@@bnmporvida6138 Hard to say for sure without a visual, but from your description sounds like still "yes". Feel free to send us a visual helpdesk@agacad[dot]com for a more definitive answer.
@@be-smart-software also when placing in a Ridge Beam, it drops it down from the peak, i need it to not drop and stay at the level it needs to be so rafters can connect into the sides.
Hi Dren, check out our Wood Framing tutorial video for a closer look at numbering ua-cam.com/video/7C1MIeYz2eU/v-deo.html (Sorry for taking so long to reply)
Hi Pablo, sorry that your question has gone unanswered til now. First, you need to use the command 'Number Walls' before creating an assembly. And then, for step-by-step on Numbering, watch this 6-min Wood Framing tutorial video ua-cam.com/video/7C1MIeYz2eU/v-deo.html
Are there any Metal Wall Framing tutorials? This is different from Wood Wall Framing. I just can't get the king studs to act properly nor the header to adjust per the length of the window/door/opening.
Unfortunately, we do not yet have Metal Framing Wall tutorial vids, still working on producing a series for that like we have done for Wood Walls (ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html ) In the meantime, please consult the technical documentation that comes with the software or write to helpdesk@agacad[dot]com
Hi Peter, tutorial #2 and #8 in our Wood Framing playlist cover "link wall" and paneling/sheathing more slowly so that you can follow along more easily. ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html If more technical questions arise while using our software, please reach out at helpdesk@agacad[dot]com. Thanks for watching!
Hi Andrea, thanks for the question, so sorry for the delay in replying. Best would be to contact us via helpdesk@agacad[dot]com. This sounds similar to an issue a client or two have had that involved a third party updater. It may have been hsbcad 'Delete Elements' Updater, but it deleted Openings after using the 'Frame Wall/Floor/Roof' commands. The issues were gone after uninstalling or disabling the updater.
As a beginner, this is difficult to follow. It's too fast and not explained thoroughly enough. I stopped watching when she started splitting walls, and I didn't understand why. I'll have to start over and see if I can catch on.
Hi Mandy, thanks for watching and for your feedback. While we're glad if our webinars help you to use the software, they're not actually intended to be tutorials, but more to show what's possible. That's why they might move faster than a tutorial would, etc. In case they'd be useful for you, here is our collection of tutorials showing how to frame walls with our Wood Framing Wall plugin ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html
@@be-smart-software It was a user error. This is such a complex addon for Revit. It could practically be its own software. There's just a large learning curve. Honestly, full breakdown tutorials of all toolsets would be the most helpful.
Roger that, Kiknchikn. That's precisely why all new users of our framing addons have a mandatory training package. Otherwise...yeah, the learning curve is steep and even if you can figure things out on your own, there is so much more it can do that most people would never be aware of. Anyway, appreciate your feedback/review here, hope you like/liked it, sorry for the delay in writing back to you. And FWIW, here is our inaugural set of Wood Framing Wall tutorials ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html Others are forthcoming as we get around to it.
floor framing and roof framing, can it drop in hangers for a rafter to ridge connection?
Yes, we can distribute Structural Connections (hangers, holdowns, bolts, etc.) based on element intersections automatically. Thanks for watching!
@@be-smart-software even when the rafter to side of ridge is at the roof pitch angle?
@@bnmporvida6138 Hard to say for sure without a visual, but from your description sounds like still "yes". Feel free to send us a visual helpdesk@agacad[dot]com for a more definitive answer.
@@be-smart-software also when placing in a Ridge Beam, it drops it down from the peak, i need it to not drop and stay at the level it needs to be so rafters can connect into the sides.
@@bnmporvida6138 To help you further, please write to our helpdesk.
I have a question, how do you number/create parts for insulation. How is that handled?
Hi Dren, check out our Wood Framing tutorial video for a closer look at numbering ua-cam.com/video/7C1MIeYz2eU/v-deo.html (Sorry for taking so long to reply)
Hello, When I'm creating the asembly I keep getting the wall parameter "mark" is empty
Hi Pablo, sorry that your question has gone unanswered til now. First, you need to use the command 'Number Walls' before creating an assembly. And then, for step-by-step on Numbering, watch this 6-min Wood Framing tutorial video ua-cam.com/video/7C1MIeYz2eU/v-deo.html
Are there any Metal Wall Framing tutorials? This is different from Wood Wall Framing. I just can't get the king studs to act properly nor the header to adjust per the length of the window/door/opening.
Unfortunately, we do not yet have Metal Framing Wall tutorial vids, still working on producing a series for that like we have done for Wood Walls (ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html ) In the meantime, please consult the technical documentation that comes with the software or write to helpdesk@agacad[dot]com
Hello, why in "link wall", "framing layer" part I just have only sheathing and peneling and not like you vertical layer, siding.... ect ?
Hi Peter, tutorial #2 and #8 in our Wood Framing playlist cover "link wall" and paneling/sheathing more slowly so that you can follow along more easily. ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html If more technical questions arise while using our software, please reach out at helpdesk@agacad[dot]com. Thanks for watching!
The Frame Wall command keeps deleting my doors/windows automatically, once it generates the frame. What am I doing wrong?
Hi Andrea, thanks for the question, so sorry for the delay in replying. Best would be to contact us via helpdesk@agacad[dot]com. This sounds similar to an issue a client or two have had that involved a third party updater. It may have been hsbcad 'Delete Elements' Updater, but it deleted Openings after using the 'Frame Wall/Floor/Roof' commands. The issues were gone after uninstalling or disabling the updater.
As a beginner, this is difficult to follow. It's too fast and not explained thoroughly enough. I stopped watching when she started splitting walls, and I didn't understand why. I'll have to start over and see if I can catch on.
I agree. Tutorials are supposed to hold your hand and walk you through everything!
Hi Mandy, thanks for watching and for your feedback. While we're glad if our webinars help you to use the software, they're not actually intended to be tutorials, but more to show what's possible. That's why they might move faster than a tutorial would, etc. In case they'd be useful for you, here is our collection of tutorials showing how to frame walls with our Wood Framing Wall plugin ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html
This is NOT user friendly.
@@be-smart-software It was a user error. This is such a complex addon for Revit. It could practically be its own software. There's just a large learning curve. Honestly, full breakdown tutorials of all toolsets would be the most helpful.
Roger that, Kiknchikn. That's precisely why all new users of our framing addons have a mandatory training package. Otherwise...yeah, the learning curve is steep and even if you can figure things out on your own, there is so much more it can do that most people would never be aware of. Anyway, appreciate your feedback/review here, hope you like/liked it, sorry for the delay in writing back to you. And FWIW, here is our inaugural set of Wood Framing Wall tutorials ua-cam.com/play/PLzDqpnw6ReoOVI6kbLl71ZQLTPbZ0vRkd.html Others are forthcoming as we get around to it.