I came across your video about 8 months ago went out and picked up the gel pads came home and installed.. been wearing everyday since with comfort! Thanks for sharing this great idea!!!
@@Fullblown671 So where you need the support is under the belt line! It adds just a hair where installed but nothing noticeable and the comfort is great!
As a bigger guy who gets bruises at my waist at 3:00 every time I wear my IWB holster for any period of time, I'm excited to try this hack! My Vedder Lighttuck is as adjustable as it gets. It's my body type that's causing the problem. Ordered the needed from Amazon and should be here today. Update: Yes, it's a vast improvement! It also has the added benefit of canting the holster out a bit and preventing my skin from getting pinched when re-holstering. I'll have a better assessment after wearing it for 8 hours, but this feels like it will work.
This video literally has changed my entire concealed carry life. Adding a wedge was the best thing I could’ve done for myself, but it still wasn’t perfect. Saw this video, figured I’d try it cuz at worst, it like $7 down the drain, no big deal. But I did NOT realize how comfortable and how incredibly well this technique works. I even doubled up a couple of these heel inserts to make a slightly bigger wedge and it’s allowed me to carry some guns I’ve never been able to carry before not only due to how uncomfortable it was, but also because I couldn’t get them to conceal well enough. Thank you for putting this out there; this video has made carrying fun for me again! AND is super comfortable again, too!!
Kept searching for your follow up video but couldn't find it. So, I just finished attaching my Dr Scholls to my Glock 19,IWB appendix carry, kydex holster, which uses Ulticlip , made by HolsterCo LLC. Your hack works perfectly. It is easy to install and provides about 1/4" to 3/8 "adjustment. In other words it pushes the the handle of the pistol into my belly. Wife says I no longer have an excuse to wear only black T-shirts. It was a great idea. Thank you for sharing!
It’s sucks. The wedge is not even close to being a wedge. It offers absolutely jack shit. You need a thicker wedge shape rubber door stopper or a thick thick foam pad and shape it into a wedge for it to work. The shoe gel pad is way too skinny and doesn’t do JACK SHIT. it’s a fuckin ugly add on. Go with one of the two I listed or get a real wedge and claw for ultimate usability and concealment
@@techti8792 3 o clock doesn’t really matter as much, just get something kydex from a reputable manufacturer. You shouldn’t need the wedge for 3. Why not appendix tho? Jw
@@valiant545 I like strong side cause its the same positioning when your carrying owb. Like a warbelt. The muscle memory is already there. And retention aiming is already in place when you draw. I like Bill rapiers method as well. He carries strong side also. I found a holster by the way.
Tried it and my initial feeling is that my holster is more comfortable and conceals a little better. This is an awesome DIY, thank you for taking the time. I also ordered some Tier 1 wedges to see how those fit.
@@wilcoxassociates775 It was decent, especially if you’re wearing slim fitting pants. I would recommend looking into Tier 1 wedges for more options though.
@@chewychoui If I had to choose, definitely T1C. Honestly though, I’m not a HUGE fan of the T1C as it gets pretty smashed down over time. Not bad, but I ended up just not having one on.
Nice video. I use a Vedders cloth covered wedge that seems to be gel filled. No complaints. Actually working as intended. Any complaints on the plastic gel pad in hot weather? Looks like a good idea.
Great idea and cheap. These work fine if you understand concealment. People complaining about the thickness must not understand that you can get products like this in many different thickness levels even up to over an inch thick. If you have a larger gut or wear tighter clothing, you may want to get a thicker one to push the grip in further. Clearly he doesn't need that much so this level of thickness worked fine for him.
I've been carrying everyday for 3 years. Thought I'd try out this holster and it is the most uncomfortable thing I've ever tried. Your idea has def helped. I only switched because I have been using a soft holster and a guy on UA-cam shot himself leaning over.
Amen brother. I just got my T. rex holster and I wore it today and that is exactly where it was lighting my ass up. Thanks for the info. I’m heading to Walmart now. I have to place mine more by the muzzle tip.
I tried the wedge hack. It feels like I need a bigger wedge. It does help greatly with the gun pressing into my pelvis (it was a hotspot), however it feels as if it's not helping enough in tucking the grip into my abdomen. I may try stacking the two wedges on top of each other. I'm using a Crossbreek "The Reckoning" holster with claw. The holster backing is (cow) leather, but I was able to get the velcro to stick (used tape to the leather to make a smooth surface for velcro adhesion).
Been using this holster for a year now and it’s good for me. Not always, but i definitely recommend one. I needed a cushion due to a scar and I wear it without skivvies(Arizona). I used a section of wetsuit(8654 tactical...ha) for the pad. Don’t use it when you go to the dentist.
Nice way to improvise a Keepers Holster, btw... a hair dryer helps with velcro adhesion (like with Talon grips) it has worked well with my Crossbreed for about six months now... even with the tactical muffin top.
even just rubbing them in your hands (like you're washing you hands) while the clear plastic in on there you will help it adhere. Hair dryer or heat gun does work best but I don't always do that unless it is something I'm taking a bit of time and effort on. When I'm just throwing something together, I rub them in my hands for about 30 seconds vigorously hand it heats it up a bit.
@@8541tactical If you want to see what I did with your idea, check out the last poston this thread: www.calguns.net/calgunforum/showthread.php?t=1714877 Thanks for the info, I really hope this works.
Why don't the manufacturers just make better cushions for the holster(s) instead of having their customers waste time and money to make something comfortable that already should be?
@@mustardman5366 "Cost... ??? Adding more work means charging more money.." I don't mind paying good money for a well-designed holster. Holsters (good ones) are already expensive - we shouldn't have to pay $100+ for a holster and then have to rig it to ride right with a damned shoe gel. Really.
@@unixfool- Not everyone's body is the same when it comes to comfort. So, a company should just cater to your needs and charge more for their holsters because you have baby skin and get "hot spots"? Thats cute.. Yes.. It cost a lot of money to redesign things.. Maybe you should practice being a bit tougher.. Or, just improvise like the others that need extra comfort do..
Liked the tip on clipping the corners off, and where the loops should go. I'm about to do the a similar velcro attachment for a purpose-made leather IWB karambit sheath.
@@ThePROFESS10NAL Try ua-cam.com/video/Vl0Nl2BPXqM/v-deo.html this may be more ideal with you. The gel wedge doesn't cant the holster bymuch, it more so keeps your under shirts from rising during draws. It does offer a bit of comfort, but if your a fairly sized guy with a 400th parallel....the gel probably won't be enough.
My dad told me when he was a drill sergeant in the Army station in MS they all used to put maxi pads inside their brown rounds so they wouldn’t get soaked 😂 if only the privates knew the DSs had pad stuck to their foreheads all day..
I did this to my Zero28 Customs appendix holsters. It worked great! I could sit for long periods of time without the discomfort of the kydex digging into my pubic bone.. Great idea.
"Foam wedge", or as I call it, bladder bump, is not comfortable. Dr Scholl's sounds brilliant! I would keep the pad below the beltline. That will create the pivot force you referred to, and not add bulk to the beltline.
Take that Velcro and lay it horizontally across the bottom edge of the holster and cut it to fit exactly. That soft side if the Velcro should be all you need. I did the same to an owb where the paddle tucks inside your pants.
The trick to setting Velcro is to keep the pieces together, mount them both to the holster, then press the wedge on top right where you want it. But you probably figured that out.
Joe Brown use a hair drier to help the adhesion process. If all else fails just hot glue/super glue it on. It’s the disposable part so it shouldn’t matter if it’s permanent. Hope this helps.
Great video, this is the kind of info us Americans need. I was thinking if it were to breath properly? For a hot dry climate where you sweat hard for like 30 minutes then dry off a little
I know this is an old vid but I recall you had a sidecar hack and I finally took the plunge into appendix carry. I’ll have to try this out. After a week of carrying my G19 in a sidecar it’s not bad, but I could probably also lose 10 lbs 😂
Samuel Alzate come on seriously? You sold what some would call the perfect handgun because it poked you a little bit?? I'm a big dude and I carry my glock 26 with G17 mags in it in a $30 holster I got off of Amazon and it's perfectly comfortable. Now it's not a 19 but not too much difference in size and no it doesnt have the attached mag holder, I carry those in my pocket but my point is there are literally hundreds if not thousands of options for concealed carry out there so why sell it before you've exhausted all possibilities? That's all. Now if you weren't particularly fond of it or you needed some quick cash then That changes everything! Either way none of my business just hate to see you lose out before you tried everything. In fact maybe a 26 might work better for you, pick up those mag sleeves that cover the exposed part of a Glock 17 mag and you can rock it in a 26!! Then you have 18 rnds in a compact pistol. Like I said I'm a big guy with the first inexpensive holster I found and couldn't be happier! Should you really be interested let me know and I'll get you the exact holster I'm running with that set up. Thanks.
Tim the gun guy lol I know I know. I sold my G19 because I had a G43 and it was more comfortable for me. I was carrying the G19 less and less and then I moved so I needed the money. But I'm definitely gonna get one again. Maybe the Glock 19X.
Samuel Alzate There you go man!! I love how your thinking!!! I gotta get one of those too! I got all kinds of glocks and guns in general man but I feel your pain! When I was a young man, I'm 50 now I got into some trouble and needed the quick cash and of course the only thing I had of value was my guns!!! So one by one they all went! All but a new fangled plastic pistol I bought in 1987!! Everybody in my shooting circle thought I'd lost my mind paying that much for "PLASTIC" Well thankfully something told me to hold onto that gun which of course is a Glock17 gen2 I think which if I'm not mistaken was what the public was sold??Anyhow man other then one issue with locking back on an empty mag which they quickly fixed it's been the best I've owned! I'd be afraid to guess the round count through her and shes still all original!!! But if I had to guess in the 30plus yes I've had it probably easily a half million rounds!!! Maybe I should contact Glock and tell them my story!! Lol. Anyway bud thanks for taking what I wrote in a positive way cause that's how I meant it and I hate to hear people part with guns unless of course they hate it but not your case! Hang in there and just start rebuilding your collection as you can and you know that will pretty much hold its value!! At least that's what I tell myself every time I want a new toy!! Which seems to be every other week a new gun comes out!!! Thanks for the reply and good luck with the new 19!! Share a pic when your the proud owner!! Lol.
I usually wear this under my shirt. When I do wear a T-shirt between the holster and my skin, I will pull the shirt up a bit before pushing the holster into my waistband.
It being grabby is actually a great benefit. While it is a little harder to get the holster into your pants the benefit is that it doesn’t move once it’s there. Holster is always in the same place on the draw and it doesn’t try and come out with the gun.
Yes. I have an Incog. The version I have does not allow for use with optics and a weaponlight. I do not believe any of the Incogs will accept the APLc. I also don’t believe they have a model that will work with optics and a mag caddy.
8541 Tactical oh ok thanks for the reply! I’m using an incog with the mag caddy and it does tend to print with the mag caddy attached. But other than that i like it but but I need to try this heel cushion on it lol
@@thehamburglar9mmMole Skin is excellent for chafe points and is used for shoe discomfort. Should work for holsters too. en.wikipedia.org/wiki/Moleskin
Genther 3408 I carry the same way, but I realize that AIWB carry is much faster from draw to first shot, and much easier to draw when seated or driving.
Doesn’t work as a wedge for me the concave shape of the heel part doesn’t push out the holster enough. It’s comfortable and doesn’t move around. For the price there’s better and cheaper options. Yoga block, solid heel insert or just get the T1C wedges
Yah but that gel pad is going to stick to your undershirt/ underwear trying to get the sidecar in and out of your pants. It is made to slide with ease. Also, where is the update with you actually wearing it and feedback?
snteevveetns I thought the same. Also I am curious if it will stick to your bare skin. I look forward to a follow up review after he has worn this for a month before I try it.
Definitely need an update video in a few months! The only reason why I was going to go with a alien gear or stealth gear holster for my P365 instead of a kydex holster is because it is Not Comfortable for IWB. Functional - YES. Comfortable - No.
puma51921 Ha me too, just commented to a guy on.this thread said he sold his 19 because of this problem! I suggested the 26 with 17 mags and a $30 cheapy AIWB holster off of Amazon! I couldnt be happier with my set up and I'm a big dude!!!
Jalen Byon No. Tuctite uses horrible clips that dig into your skin whenever you sit down. Most of these holsters are the same. The important differences are the little things like what clips are used, angles and overall ability to conceal. Like most guys, I have a drawer full of failed holsters. I modify my current edc holsters to fit my body. I would have to Dremel off the lower portion of the Tuctite clips to make it remotely useable.
Padding that area is a genius idea but using something that doesn't breathe could be improved. Right now it might not be so bad but any extended period outdoors with 110 degrees in August and your swamp sack just turned into a running faucet. Cut out some breathable padding from something, re-purposed sports padding etc., sew it to Velcro for attachment and so that the edges don't fray. Voila. There may already be pads with Velcro that would do the trick stolen from some other usage. The hunt begins...
Quick Google search: Helmet pads might the best off the shelf solution. I was thinking one of those loose mesh shoulder pads or something like that first. Then may be neoprene like an Ace bandage or soft knee pads. But if anyone finds something else please post.
The gel will not absorb sweat and shouldn’t be any less-comfortable than the non-breathable kydex. Also, I don’t usually go commando, so there should always be a base layer between my skin and the pad. Helmet pads would likely work fine if you want to cut them to shape. I am not sure how durable they would be in this configuration.
I came across your video about 8 months ago went out and picked up the gel pads came home and installed.. been wearing everyday since with comfort! Thanks for sharing this great idea!!!
Does it add bulk to your holster though?
@@Fullblown671 So where you need the support is under the belt line! It adds just a hair where installed but nothing noticeable and the comfort is great!
@@213bunch Cool thank you for the response!
To date, these scholls have been the most comfortable wedge I have used. Not sure where I discovered it, but this is great video!!
As a bigger guy who gets bruises at my waist at 3:00 every time I wear my IWB holster for any period of time, I'm excited to try this hack! My Vedder Lighttuck is as adjustable as it gets. It's my body type that's causing the problem. Ordered the needed from Amazon and should be here today.
Update: Yes, it's a vast improvement! It also has the added benefit of canting the holster out a bit and preventing my skin from getting pinched when re-holstering. I'll have a better assessment after wearing it for 8 hours, but this feels like it will work.
@Beaf Supreme This works, making sitting for long periods possible without the bad bruise.
As a bigger guy, stop fucking eating.
It’s not your body type it’s your diet and exercise plan
Someone here needs to release his anger at the shooting range
You kinda sound like Owen Wilson. Please say wow in your next video.
Jay Kline He does really sound like Owen Wilson
No. It IS Owen Wilson.
Hahahahahahahahahahaha
Wow... He does.
Swear!!!
This video literally has changed my entire concealed carry life. Adding a wedge was the best thing I could’ve done for myself, but it still wasn’t perfect. Saw this video, figured I’d try it cuz at worst, it like $7 down the drain, no big deal. But I did NOT realize how comfortable and how incredibly well this technique works. I even doubled up a couple of these heel inserts to make a slightly bigger wedge and it’s allowed me to carry some guns I’ve never been able to carry before not only due to how uncomfortable it was, but also because I couldn’t get them to conceal well enough.
Thank you for putting this out there; this video has made carrying fun for me again! AND is super comfortable again, too!!
How did it take you 9 minutes to explain installing self-adhesive velcro tape?
I wonder... 4yrs later are you still a douchbag?
And to think a person not paying for his free content feels entitled enough to give him critiques as if YOU were paying for it.. interesting.
Well thats the thing hold between the holster and the heel cushion perhaps its the most critical part of installation
@@jeremiahcherry5283 I don’t think you understand how UA-cam works 😂
Lol
Kept searching for your follow up video but couldn't find it. So, I just finished attaching my Dr Scholls to my Glock 19,IWB appendix carry, kydex holster, which uses Ulticlip , made by HolsterCo LLC. Your hack works perfectly. It is easy to install and provides about 1/4" to 3/8 "adjustment. In other words it pushes the the handle of the pistol into my belly. Wife says I no longer have an excuse to wear only black T-shirts. It was a great idea. Thank you for sharing!
Glad it worked for you. I love it.
@@8541tactical I am going to go get this stuff and do it for my glock 29, thank you guys.
Soooooooo, almost been a year with no update. Any update to this vid like you said you would do.
It’s sucks. The wedge is not even close to being a wedge. It offers absolutely jack shit. You need a thicker wedge shape rubber door stopper or a thick thick foam pad and shape it into a wedge for it to work. The shoe gel pad is way too skinny and doesn’t do JACK SHIT. it’s a fuckin ugly add on. Go with one of the two I listed or get a real wedge and claw for ultimate usability and concealment
Thankfully now T1C has "wedges", they work extremely well
@@tyc2425 What holster you recommend for 3oclock? Tired of searching, and seeing nothing but cool guy appendix carry vids. And what wedges you use?
@@techti8792 3 o clock doesn’t really matter as much, just get something kydex from a reputable manufacturer. You shouldn’t need the wedge for 3. Why not appendix tho? Jw
@@valiant545 I like strong side cause its the same positioning when your carrying owb. Like a warbelt. The muscle memory is already there. And retention aiming is already in place when you draw. I like Bill rapiers method as well. He carries strong side also. I found a holster by the way.
Any updates on if you like it or not?
I just did it it works great
Tried it and my initial feeling is that my holster is more comfortable and conceals a little better. This is an awesome DIY, thank you for taking the time. I also ordered some Tier 1 wedges to see how those fit.
How did the wedges work out
@@wilcoxassociates775 It was decent, especially if you’re wearing slim fitting pants. I would recommend looking into Tier 1 wedges for more options though.
Did you like the wedges from T1C or the Dr Scholls better?
@@chewychoui If I had to choose, definitely T1C. Honestly though, I’m not a HUGE fan of the T1C as it gets pretty smashed down over time. Not bad, but I ended up just not having one on.
@@JoeBuys thanks for the reply. I ordered the wedges haha.
Nice video. I use a Vedders cloth covered wedge that seems to be gel filled. No complaints. Actually working as intended. Any complaints on the plastic gel pad in hot weather? Looks like a good idea.
Not for me. I carry with these all time with zero issues.
Great idea and cheap. These work fine if you understand concealment. People complaining about the thickness must not understand that you can get products like this in many different thickness levels even up to over an inch thick. If you have a larger gut or wear tighter clothing, you may want to get a thicker one to push the grip in further. Clearly he doesn't need that much so this level of thickness worked fine for him.
What kind of gun is that, it’s nice
Wow, this is a great idea. I almost bought a wedge. But this is the same concept without having to pay shipping. 😊😊😊😮😮😮 TYVM
I've been carrying everyday for 3 years. Thought I'd try out this holster and it is the most uncomfortable thing I've ever tried. Your idea has def helped. I only switched because I have been using a soft holster and a guy on UA-cam shot himself leaning over.
This is a great idea. I have put them on my AIWB. Along with several wedges. I'm going to change holsters from We the people to Tier One
Amen brother. I just got my T. rex holster and I wore it today and that is exactly where it was lighting my ass up. Thanks for the info. I’m heading to Walmart now. I have to place mine more by the muzzle tip.
Hey thanks for the video, that’s a great idea. It is too bad though why holsters manufacturers don’t consider these types of issues before production.
How has this held up so far?
Sir - I just finished my setup - this is perfect! Thank you for the instructions
I tried the wedge hack. It feels like I need a bigger wedge.
It does help greatly with the gun pressing into my pelvis (it was a hotspot), however it feels as if it's not helping enough in tucking the grip into my abdomen.
I may try stacking the two wedges on top of each other.
I'm using a Crossbreek "The Reckoning" holster with claw. The holster backing is (cow) leather, but I was able to get the velcro to stick (used tape to the leather to make a smooth surface for velcro adhesion).
Been using this holster for a year now and it’s good for me. Not always, but i definitely recommend one. I needed a cushion due to a scar and I wear it without skivvies(Arizona). I used a section of wetsuit(8654 tactical...ha) for the pad.
Don’t use it when you go to the dentist.
Is there a follow up on this? Did you end up liking it?
Nice way to improvise a Keepers Holster, btw... a hair dryer helps with velcro adhesion (like with Talon grips) it has worked well with my Crossbreed for about six months now... even with the tactical muffin top.
even just rubbing them in your hands (like you're washing you hands) while the clear plastic in on there you will help it adhere. Hair dryer or heat gun does work best but I don't always do that unless it is something I'm taking a bit of time and effort on. When I'm just throwing something together, I rub them in my hands for about 30 seconds vigorously hand it heats it up a bit.
Wow that's great advice thanks man
Thank you. I just ordered the gel pad.
You are welcome!
@@8541tactical If you want to see what I did with your idea, check out the last poston this thread:
www.calguns.net/calgunforum/showthread.php?t=1714877
Thanks for the info, I really hope this works.
Why don't the manufacturers just make better cushions for the holster(s) instead of having their customers waste time and money to make something comfortable that already should be?
Cost... ??? Adding more work means charging more money..
Tier 1 gives you a gel wedge option
@@mustardman5366 "Cost... ??? Adding more work means charging more money.."
I don't mind paying good money for a well-designed holster. Holsters (good ones) are already expensive - we shouldn't have to pay $100+ for a holster and then have to rig it to ride right with a damned shoe gel. Really.
@@unixfool- Not everyone's body is the same when it comes to comfort. So, a company should just cater to your needs and charge more for their holsters because you have baby skin and get "hot spots"? Thats cute.. Yes.. It cost a lot of money to redesign things.. Maybe you should practice being a bit tougher.. Or, just improvise like the others that need extra comfort do..
Can the gel be trimmed?down to a smaller size?
Yep.
Great idea. I was just complaining the other day how much my appendix holster was bugging me in that area. I have to try that out. Thanks.
this just gave me a great idea of how to use this as a sweat guard for the right rear portion of the slide on my EDC. Great vid!
So how do you like it after 8 months?
Liked the tip on clipping the corners off, and where the loops should go. I'm about to do the a similar velcro attachment for a purpose-made leather IWB karambit sheath.
For future viewers, I do the same thing with gear aid when repairing my puffy jackets.
Is there an update to this? Would like to see how it works out.
Any update on comfort? I have the exact same sort of set up, and was looking for something more comfortable
Still going strong. In fact, I purchased another Sidecar and did the exact same thing. The gel holds up very well and the comfort is significant.
Thanks for the hack. I am looking to make the ride better. How has it been? And are you still using this method?
Does the rubber pad pull body hair while moving around, taking the holster off or even drawing the pistol?
How’d you like it? I didn’t see a follow up video
Works great. I need to shoot the follow up.
This is perfect. Much better than an overpriced comfort pad from clinger or sticky.
Did you end up keeping this gel pad on?? I am having same issue with the end digging into pelvis
Yes. Still using it daily.
I have a similar set up. It still gets uncomfortable. I drive a lot for work though.
8541 Tactical do an update video!
@@ThePROFESS10NAL Try ua-cam.com/video/Vl0Nl2BPXqM/v-deo.html this may be more ideal with you. The gel wedge doesn't cant the holster bymuch, it more so keeps your under shirts from rising during draws. It does offer a bit of comfort, but if your a fairly sized guy with a 400th parallel....the gel probably won't be enough.
I just use a maxi pad that has an adhesive side. It absorbs the sweat too!
Yuck
😂😂😂
My dad told me when he was a drill sergeant in the Army station in MS they all used to put maxi pads inside their brown rounds so they wouldn’t get soaked 😂 if only the privates knew the DSs had pad stuck to their foreheads all day..
Also does double duty if you get shot. Just pack the wound with it.
Just don't get the ones with wings... Those are gay
@8541tactical Where did you get your Glock stippled? I want that.
It was very painful before the gel cushions and know NO pain. I have added them to all of my holsters.
Are we going to get that 2 year update? How well did it work?
Works great. Still using the same wedge. Guess it’s time for an update!
@@8541tactical Awesome!!!
I did this to all of my Tier-1 holsters. They are more comfortable to carry that way now.
Where did you get the grip for your gun? Looks super nice!
I did this to my Zero28 Customs appendix holsters. It worked great! I could sit for long periods of time without the discomfort of the kydex digging into my pubic bone.. Great idea.
"Foam wedge", or as I call it, bladder bump, is not comfortable.
Dr Scholl's sounds brilliant!
I would keep the pad below the beltline. That will create the pivot force you referred to, and not add bulk to the beltline.
Update on this?
Take that Velcro and lay it horizontally across the bottom edge of the holster and cut it to fit exactly. That soft side if the Velcro should be all you need. I did the same to an owb where the paddle tucks inside your pants.
My IWB holster digs into my groin when I’m sitting or bending over. Would this hack help prevent that?
So did it work ?
Yes
So how it works finally? 🤔
The trick to setting Velcro is to keep the pieces together, mount them both to the holster, then press the wedge on top right where you want it. But you probably figured that out.
update?
Hey, this really works! Thanks buddy
I can't get the velcro to stick to the pad. I'm using the same brand as you. Any suggestions?
Joe Brown use a hair drier to help the adhesion process. If all else fails just hot glue/super glue it on. It’s the disposable part so it shouldn’t matter if it’s permanent. Hope this helps.
@@zacharydarnell3638 Use contact cement. follow proper directions on the installation of cement
It does hit the pelvic bone, but I found that can be solved with adjusting how the pants and belt ride. But I'm definitely thinking about doing this.
neat trick
Great video, this is the kind of info us Americans need. I was thinking if it were to breath properly? For a hot dry climate where you sweat hard for like 30 minutes then dry off a little
I know this is an old vid but I recall you had a sidecar hack and I finally took the plunge into appendix carry. I’ll have to try this out. After a week of carrying my G19 in a sidecar it’s not bad, but I could probably also lose 10 lbs 😂
I sold my GLOCK 19 and all my holsters because of that problem, where was this video a year ago???
Samuel Alzate come on seriously? You sold what some would call the perfect handgun because it poked you a little bit?? I'm a big dude and I carry my glock 26 with G17 mags in it in a $30 holster I got off of Amazon and it's perfectly comfortable. Now it's not a 19 but not too much difference in size and no it doesnt have the attached mag holder, I carry those in my pocket but my point is there are literally hundreds if not thousands of options for concealed carry out there so why sell it before you've exhausted all possibilities? That's all. Now if you weren't particularly fond of it or you needed some quick cash then That changes everything! Either way none of my business just hate to see you lose out before you tried everything. In fact maybe a 26 might work better for you, pick up those mag sleeves that cover the exposed part of a Glock 17 mag and you can rock it in a 26!! Then you have 18 rnds in a compact pistol. Like I said I'm a big guy with the first inexpensive holster I found and couldn't be happier! Should you really be interested let me know and I'll get you the exact holster I'm running with that set up. Thanks.
Tim the gun guy lol I know I know. I sold my G19 because I had a G43 and it was more comfortable for me. I was carrying the G19 less and less and then I moved so I needed the money. But I'm definitely gonna get one again. Maybe the Glock 19X.
Samuel Alzate There you go man!! I love how your thinking!!! I gotta get one of those too! I got all kinds of glocks and guns in general man but I feel your pain! When I was a young man, I'm 50 now I got into some trouble and needed the quick cash and of course the only thing I had of value was my guns!!! So one by one they all went! All but a new fangled plastic pistol I bought in 1987!! Everybody in my shooting circle thought I'd lost my mind paying that much for "PLASTIC" Well thankfully something told me to hold onto that gun which of course is a Glock17 gen2 I think which if I'm not mistaken was what the public was sold??Anyhow man other then one issue with locking back on an empty mag which they quickly fixed it's been the best I've owned! I'd be afraid to guess the round count through her and shes still all original!!! But if I had to guess in the 30plus yes I've had it probably easily a half million rounds!!! Maybe I should contact Glock and tell them my story!! Lol. Anyway bud thanks for taking what I wrote in a positive way cause that's how I meant it and I hate to hear people part with guns unless of course they hate it but not your case! Hang in there and just start rebuilding your collection as you can and you know that will pretty much hold its value!! At least that's what I tell myself every time I want a new toy!! Which seems to be every other week a new gun comes out!!! Thanks for the reply and good luck with the new 19!! Share a pic when your the proud owner!! Lol.
Tim the gun guy great story man! I'm definitely building up my armament soon lol. You have a blessed day!
Samuel Alzate Thanks Bud, you as well and good luck in the future with everything gun related and otherwise!! Be well my friend.
Very useful, thanks.
Seems like the blue pad would be grabby and hard to put down into clothes. I’m going to seek out a smoother wedge.
I usually wear this under my shirt. When I do wear a T-shirt between the holster and my skin, I will pull the shirt up a bit before pushing the holster into my waistband.
Gary Sarratt, that might stop the inside shirt from coming untucked though?
It being grabby is actually a great benefit. While it is a little harder to get the holster into your pants the benefit is that it doesn’t move once it’s there. Holster is always in the same place on the draw and it doesn’t try and come out with the gun.
You could adhere the pad with the cloth side facing your body.
Have you used the Gcode incog? If so do you still like the trex over the incog?
Yes. I have an Incog. The version I have does not allow for use with optics and a weaponlight. I do not believe any of the Incogs will accept the APLc. I also don’t believe they have a model that will work with optics and a mag caddy.
8541 Tactical oh ok thanks for the reply! I’m using an incog with the mag caddy and it does tend to print with the mag caddy attached. But other than that i like it but but I need to try this heel cushion on it lol
Ingenious idea. Kydex is harsh. And the added lower bulge is flattering on me, I think
No more finding a single sock in your drawer because it's mate is stuffed down your drawers 😂
Didn’t think it would work as well as it did...damn! Nice vid...threw this on my tier 1 axis slim and it helped greatly - thanks!
improvise adapt and overcome!
I have noticed Mole skin goes a long way to improve holster and mag carrier comfort.
Did you miss the whole point of the video?! Lol are you sticking your holster inside your pants + underwear?
@@thehamburglar9mmMole Skin is excellent for chafe points and is used for shoe discomfort. Should work for holsters too. en.wikipedia.org/wiki/Moleskin
@@thehamburglar9mm- maybe he goes commando. Putting on panties is a waste of time. You're a guy. Act like it..
@@mustardman5366 watch out for your zipper toughy...
@@donovanchilton5817 so woman's button fly pants are for men too?
This saved my groin
I’m guessing it worked for you? Any ideas or problems?
Thanks buddy. I'm trying this out now.
Wear my bravo iwb at 4 and 5 o'clock, comfortable all day
Genther 3408 I carry the same way, but I realize that AIWB carry is much faster from draw to first shot, and much easier to draw when seated or driving.
is that a glock 17? and was your work done at NCEngravers? love the brain stippling
Edit: maybe the Glock 30S?
Great idea..
Check out keepers concealment
This video is more than 3 month old, did it work?
Great idea
Doesn’t work as a wedge for me the concave shape of the heel part doesn’t push out the holster enough. It’s comfortable and doesn’t move around. For the price there’s better and cheaper options. Yoga block, solid heel insert or just get the T1C wedges
I use Dr Scholl’s Air-Pillo with Velcro on all my holsters takes away the hot spots
What trigger is on that Glock? Looks extremely nice to use
That is an Overwatch Precision Trigger. It is a really nice trigger.
Great vid!!!!! Thxs!!
Yah but that gel pad is going to stick to your undershirt/ underwear trying to get the sidecar in and out of your pants. It is made to slide with ease. Also, where is the update with you actually wearing it and feedback?
I didnt have a gel pad but used a normal insole. I have the sole side facing the holster and it has helped.
Thank you
Great idea, thanks!
Any updates?
It has been working very well.
I'm curious about the gel and it causing more sweating....
snteevveetns I thought the same. Also I am curious if it will stick to your bare skin. I look forward to a follow up review after he has worn this for a month before I try it.
My only concern is the gel sticking to underwear and moving it around. Having a soft cloth layer on the outside would probably fix that.
Definitely need an update video in a few months! The only reason why I was going to go with a alien gear or stealth gear holster for my P365 instead of a kydex holster is because it is Not Comfortable for IWB. Functional - YES. Comfortable - No.
The DarkNight KSG makes a great one. Comfortable, plus claw and wedge. Out of stock on light-bearing right now.
Pubic bone or Pelvic bone?
Good idea. This is why I carry glock26. Doesn't hurt when sitting down
puma51921 Ha me too, just commented to a guy on.this thread said he sold his 19 because of this problem! I suggested the 26 with 17 mags and a $30 cheapy AIWB holster off of Amazon! I couldnt be happier with my set up and I'm a big dude!!!
Your right Owen Wilson sounding!
Badass dude 👍👍👍
Makes me glad I chose a smaller pistol and pocket carry. So much easier.
rick Fischer what you gain in comfort you lose in firepower
AIWB offers the fastest time from draw to first shot.
Tuctite is a superior product that doesn't rely on edited showman ship and buddybuddy back scratching marketing
Jalen Byon No. Tuctite uses horrible clips that dig into your skin whenever you sit down. Most of these holsters are the same. The important differences are the little things like what clips are used, angles and overall ability to conceal. Like most guys, I have a drawer full of failed holsters. I modify my current edc holsters to fit my body. I would have to Dremel off the lower portion of the Tuctite clips to make it remotely useable.
Padding that area is a genius idea but using something that doesn't breathe could be improved. Right now it might not be so bad but any extended period outdoors with 110 degrees in August and your swamp sack just turned into a running faucet. Cut out some breathable padding from something, re-purposed sports padding etc., sew it to Velcro for attachment and so that the edges don't fray. Voila. There may already be pads with Velcro that would do the trick stolen from some other usage. The hunt begins...
Quick Google search: Helmet pads might the best off the shelf solution. I was thinking one of those loose mesh shoulder pads or something like that first. Then may be neoprene like an Ace bandage or soft knee pads. But if anyone finds something else please post.
The gel will not absorb sweat and shouldn’t be any less-comfortable than the non-breathable kydex. Also, I don’t usually go commando, so there should always be a base layer between my skin and the pad.
Helmet pads would likely work fine if you want to cut them to shape. I am not sure how durable they would be in this configuration.
Anything that would absorb sweat would begin to stink after a short while.
Would trimming the edge work the same?
No. Trimming doesn't solve the issue that we are pressing a hard object into a bony area of the body.
Did anyone else realize he said "pubic bone" instead of pelvic bone towards the end??😂😂😂
Bite into the pubic bone
:)
Pelvic hair 😂
Genius.
T.REX Arms holsters suck a big one! This tier1concealed is much more comfortable, if your into the "caddy fad."
Wow really?
I’m having the same problem. My gcodes don’t hurt but my sidecar does.
I would think 2 sided tape would be better.