20 ways to use a Multi Tool | Dewalt
Вставка
- Опубліковано 19 чер 2024
- DEWALT DCS355N Oscillating Multi Tool amzn.to/3uN11A9 uses - Some of the many uses of a powered cordless Oscillating Multi Tool. These Multi Tools are the most versatile tools that money can buy. The Dewalt cordless oscillating multi tool cuts, sands, scrapes, trims and much more. There are literally hundreds of every day tasks where an oscillating Multi Tool can be useful. I show in this video a handful of uses that I use mine for........but there ARE hundreds of situations where these can be used !
Updated version of this video can be seen here • 28 ways to use a Multi...
www.amazon.co.uk/shop/bacrenp...
The particular Multi Tool that I use is the Dewalt DCS355N - This tool is one of the best out there due mainly to the quick release mechanism that holds the different blades in place. I can highly recommend this particular model for any one that is thinking of purchasing a multi tool.
My Amazon SHOP where I have listed all of the tools and equipment that I use for anyone that is interested www.amazon.co.uk/shop/bacrenp...
LINKS TO THE TOOL & SOME BLADES THAT I USE BELOW -
DEWALT DCS355N MULTI TOOL (Bare unit) - amzn.to/3uN11A9
DEWALT 18V 4AH BATTERY - amzn.to/3foHgpa
DEWALT BATTERY CHARGER - amzn.to/2Ar3NCZ
VALUE PACK OF BLADES - amzn.to/30DJahq
GROUT REMOVAL BLADE (Thin) - amzn.to/2C84AsT
GROUT REMOVAL BLADE (Thick) - amzn.to/2MZRRKZ
GROUT REMOVAL SICKLE BLADE - amzn.to/2YC761R
BI METAL / WOOD BLADES - amzn.to/3fupXTH
SCRAPER BLADES X 3 - amzn.to/30HyePG
SANDING ATTACHMENT WITH PADS - amzn.to/3hwcz3g
CIRCULAR SAW BLADES 5 PACK - amzn.to/2YFIANI
TIMESTAMPS
0:00 Introduction to tool and blades
0:53 Plasterboard / Drywall
2:54 Plywood
3:35 Removing trim brad nails
4:46 Plunge cutting trim
5:17 Cutting copper pipe and toilet bolts
6:29 Plastic pipe cutting
6:58 Cutting nails
7:42 Cutting Acrylic
8:27 Uses with Tiles and Grout removal
9:33 Cutting door jams
10:05 Tongue and groove floor boards
11:41 Showing changing blades
13:15 Sanding and final thoughts
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also help me grow the channel in future paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#bacrenproperty #multitooluses #whattousemultitoolfor #howtousemultitool #dewaltmultitool #dewaltdcs355 #multitooldewalt #dewalt18vmultitool #waystouseamultitool #dewalt #dewaltxr
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com - Навчання та стиль
All tools, equipment and consumables that I use can be found in my Amazon shop www.amazon.co.uk/shop/bacrenproperty
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
A tip for cutting access holes in drywall (regardless of using whatever kind of knife/saw/blade) - make your cuts at a slight angle pointing inwards. This way, when you put the cut piece back in the hole, it sits nicely, and won't fall back through and down inside the wall cavity.
Thanks LS, That is a good tip. I usually just cut the top and the sides and sort of use the uncut bottom as a hinge - that way, it can be pulled back and just hangs from the wall and can easily be pushed back in place without removing it.
I like your tip though, I will start to use that when doing this from now on 👍😃
Man's a visionary
the ol pumpkin trick
You sir are smart as fuck. I thank you for that 🙏
Damnnn that’s such a clever idea, i’m doing that next time
If you’ve never used an air filter these are great. ua-cam.com/users/postUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!
Great to hear !
After seeing this, I didn't realize I was suffering with other tools when this provides a crazy-fast solution to so many problems. Thank you for the video!
It is a very handy tool - thanks for the comment 👍
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
The pain is real eh 😊
Very considerate of you to mute the loud sound of the machine when you’re using it for the video.. saved our eardrums!! Great video!
Thanks for the comment, much appreciated
I just wanted to say how much you helped me with this video. Thank you so much! It was absolutely perfect and exactly what I needed to know. I’m a older woman recently widowed and I moved into a house that needs a great deal of work, most of which I am attempting to do myself. My husband and I used to always fix up our homes together and while he was no Norm Abrams, he was well versed in using power tools. Sadly I am not and my lack of power tool knowledge has made my progress quite slow, so I decided to research the best tools to use and the multi tool was at the top of the list but to me looked like something so foreign and scary I couldn’t imagine what it could possibly do. But your video made it so very clear and concise I feel really quite confident about getting one now. Thank you for the extra steps you take in your videos for the complete novices like me who have no idea what so ever what there doing, I really appreciate it so very, very much. 😁
That is great to hear Cheryl, thank you for the comment, it's great when my videos actually help people 👍
Carpenter of 35yrs, this tool is a must for any tool kit, its the kind of tool you think you don't need until you see someone else using it, so many applications, saved me a lot of hassle many times.
Exactly, same here, it comes in SO handy for little jobs you don't even think about. Thanks for the comment 👍
What a good video, Ive been self employed 32 years .I too cover multi trades ,Ive just bought my first DW multi after my son recommended it to me and I cant believe how useful it is. Its in the same league as a workmate or a strimmer. BRILLIANT.
Thanks Terry, yes it is an invaluable tool, I would not be without mine ! Thanks for the comment 👍
Cool. Used my Dewalt 20v max tonight to replace an old drain tail pipe (thick chromed steel) on bathroom sink. It was the kind that screwed together from top and bottom and also has a nut on bottom to pull assembly down tight. It was all corroded and crusty. Popped in the fine tooth blade and cut it off just below the nut, unscrewed nut, and pulled out old assembly. The PVC replacement was about 3/4" too long, so I just used the tool again to cut about an inch off the end. I'm in love.
Great to hear - it shows just how useful the tool is, even for the most unexpected of jobs ! Thanks for the comment 👍😎
I refurbish older lawn mowers and this will come in handy for cutting off old bolts, screws, and rusty parts that need to be replaced without damaging other parts of the mower. Thanks for the video and for lowering the volume while the tool was running.
Thanks for the comment Keith and hopefully the tool will help within your business. All the best 👍
Thanks for the video, as a plumber I use this tool quite a bit, I make sure I have it with me all the time👍🏻👍🏻👍🏻
Thanks for the comment ! 👍
My father just bought me a whole Dewalt set of tools and it included this gem. Learning how to use them all. I could listen to just your voice , it has a great presenting tone.
Thanks Audrey, I am glad you found the video helpful and good luck learning to use all your tools 👍😎
I just got a bunch of tools that I have no idea how to use lol. We are on the same boat.
Just bought the set thank you for explaining to somebody who is new to the tool. Really help me out
No problem, I am glad the video helped you out - thanks for the comment 👍😍
Thank you sir! Relaxing and informative review. Just bought the dewalt version that came in a 6 pack tools set and had no idea what to use it for, but now I do!
Thanks for the comment Nick, much appreciated. 👍
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
Im a car guy, but this tool rocks. Just buy yesterday DEWALT DCS355NT and install new door my home with it. I love this tool now.
Yes, great tool to have, you will find lots of uses for it ! Thanks for the comment 👍
As a mechanic by trade I'm buying into carpentry kit for a house renovation. Great video I definitely want one because this Multi tool belongs in mechanics kit aswell! So many bolts and hidden parts I have needed to cut! With an angle grinder it's dangerous and difficult! This is perfect for many bolt cutting jobs. e.g. stubborn drop link bolts that just spin freely with nothing on the rear to counter that. Just slip this in and cut free! Brilliant tool.
I am sure you will find loads of uses for this Henry, thanks for the comment 👍😃
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
The blades don't hold up well against grade 8 hardware. Tried Milwaukee carbide lasted about 20 seconds didn't make it through the bolt. Cheap harbor freight carbide blades did as well. Took a total of 7 blades to cut the heads off of two bolts. It has worked great for making new interior panels for the shuttle bus, had a few odd shapes to notch out.
@@craigwiess1656 I found the exact same thing! literally can't go through a standard nail and if you do then the blade is completely knackered! Some random attachments could come in handy like the sander but mostly useless for mechanics I know now after using one a lot I take back my statement. Also I keep the diamond masonry bit in my angle grinder for metal now. It's way better than the sand paper grit type! I had one break on me the last time and it skimmed my face and the other bit my hand! I felt it but came out unscathed luckily! Ive never needed the recip saw for mechanics yet but its nice to know it's there😉 multi tool kind of over rated to me at this point. Maybe it will show its worth in 2nd fix and finish work more but ime still in the rebuild process! House renovation taking ages!
@@E69apeTheMatrix420 o
Having just purchased my first multitool, yes a Dewalt, I found your video so useful for familiarising myself with all the different jobs this tool can do. Thanks for giving of your time to show this!! Subbed!
Glad it was helpful and thanks for the sub - much appreciated !
I just got the dewalt combo during black friday which includes this tool. I had planned to get it because someone said i should, but they did not tell me why lol. From watching your video I can see how useful it can be. Thank you :)
Great, thanks for the comment !
And I've used mine to get gripfill / adhesive. of a Skirting board. Was trying for ages with a scraper. Though I'll try with the multi tool with the scraper attachment. BOOM 💥. THE GRIPFILL NEVER STOOD A CHANCE!!
just another use for this brilliant tool. Listen to the man. You won't be disappointed 😀
Great comment, I have not used it for that specific job, but I can imagine it would get the old gripfill off in seconds ! Cheers 👍😀
Thank you for a very interesting & informative video...i didn't realize just how versatile these multi-tools are. You've been very helpful.
Thanks Neil, I just skimmed the surface of what this tool can do.........there are literally hundreds of uses - great tool ! 👍😃
I just got this same tool at Lowes. Watching your video helped to better understand the tool. Thank you!!
No problem Danny, hopefully you find a lot of uses for the tool 👍😀
Just got mine online , collecting tomorrow. £99.98 , can't wait to start cutting things up . Great video pal
Great David, you will certainly find loads of uses for it ! Thanks for the comment 👍💪
thanks for this, lots of uses and examples and a clear commentary.
Glad it was helpful! 👍
Great video - I’ve never put a lick of paint on a house I’ve owned before but am mid-gutting of a semi 1922 house with help of a building friend. I just need one now, to cut old copper pipes and lots of other things you showed. Thankyou for sharing 👍
No problem Paul, thanks for the comment
Got one of these. An amazing power tool that I could now not live without. It does the lot.
Agreed Neil, it is a great tool !
Great to view a tool review that isn’t shouting at me like a used car salesman. Some great ideas for my Dewalt Multitool. Thank you sir!
Glad to help 👍😍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Brilliant mate. Bloody simple and well described. Thanks.
Glad it helped Scott, thanks for the comment 👍
My new multi tool has made my life much easier. Making half lap joints on pressure treated wood, after making parallel half-depth cuts into the timber with a circular saw, the multi tool made quick work of hogging out the waste material and leaving me with a nice flat surface.
That's a great idea! Thanks for the comment !
I have one of these handy tools I bought a few years back when I was tiling my floors and I’ve used it a few times for cutting copper and PVC pipes and other things. I wasn’t sure if it would work on an aluminum fence post and came across your video. I’m going to try it on the fence post. Your video is very informative and it gave me more ideas of where I could use it. Thank you!
Thank you for the great comment and I am glad you found the video useful !
Great video. Just got one for Christmas. Got some good ideas for use. Thanks
Glad I could help 👍😀
Very informative! Thanks.
Glad it was helpful!
I just bought a dewalt kit has a bunch of different tools including this. Was going to give it away bc I didn’t know what I would use it for. So glad I looked at this first: could be the best tool I got
Thanks Ben, yes, once you use it with all the different blades, it really is one of the best tools that you can have ! 👍😀
Thanks for taking the time and please disregard any negative comments... I just purchased the 20v XR (tool only) since I had the drill + two batteries already. Came with one wood and one metal blade and this video gave me a lot of ideas and a few other blades to purchase. Gotta love you funny talkers!
Thanks Ray, yes we talk a bit funny here in Scotland 😂👍
@@Bacrenfencing Never mind him...Dem yanks are the funny talkers eh? And yes Ray you're right about the negative shytsters.
@@dongraham8236 Lol Don, good to have you here mate !
Thanks this was very helpful. Bought one before really knowing what I could use it for or how , so this was perfect cheers !
Glad it was helpful to you 👍😃
I recently used mine to widen the gap between two oak floors so I could house a threshold bar. So much easier than a circular saw and chisel for the bits the saw can't reach. Of course if I had bought the threshold bar when I bought the flooring I would have needed neither!
Yes Ian, it is a great tool with SO many applications. Very good for the type of job that you have explained, so handy ! Thanks for the comment 👍😀
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
One of the more unusual uses I did was to spachcock a mutant sized turkey (~40lbs) at Thanksgiving. Made quick work of it, but the downside was disinfecting the tool and blade afterwards.
I bet this tool was good for that but sounds messy 😂 I used mine on Halloween for carving my daughters pumpkins, worked great ! Thanks for the comment. 👍
I especially loved the sound effects after patching the wall!!🤣
Glad you liked it! 😁
This is a really helpful video that has explained what I wanted to know about multi tools. Thanks for posting !
Glad it was helpful Paul and thanks for the comment !
No need to apologize. You did a great job!
Thanks !
Extremely useful video. Thanks.
That little tune at 2:13 was even more extraordinary 😂
Thanks Natalie, yes, that's the tune I play whenever I do any filling - cheers me up 😂😝👍
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
Top notch video, thanks mate!
Glad you liked it! 👍
Wow. I got a Ryobi power tool set and this and the flashlight are the ones I’ve never touched. I’m about to go Multi Tool Crazy now!! Thanks Bro!
Very cool! 😎
I just bought my first multi tool, the same Dewalt. Your video was very helpful. Thank you!
Glad it was helpful Jim, you will use the tool all the time - of that I'm sure ! Thanks 👍😀
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Excellent upload. I have just bought a DeWalt drill and driver set and have just heard about multi tools from my brother. One of these is my next purchase! Thanks for showing this and I can see it will be so useful for renovating my house.
Thanks Michael, I made another version of this showing more uses, you can see it here ua-cam.com/video/7ePCaiS7Mfo/v-deo.html
@@Bacrenfencing thanks, I will watch this in the morning 👍
I have this tool ( came with the set), I knew some use of it, but not all.
Thank you for allocating your time and show us/me all possible usages. I learned something new!
❤️❤️
Thank you
Glad it was helpful for you and thanks for the comment 👍😀
Exactly the same here, came with the set and this content is very useful indeed.
@@Bacrenfencing I used the tool to replace my doors. It become very useful to open nice& smooth slots for the door hinges. Impressive . Saved lots of time and hassle. 👍👍
I am amazed with so much usage of the multi tool. Thank you for sharing.👍👍👍
Thanks for watching!
Masterfully helpful! Thanks so much. Cheers from the States! 💛🙏🏼
Glad it was helpful Glen, cheers from Scotland UK 👍😀
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
Thank you for these great ideas you gave to us!!
You are so welcome! 👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Really good video. Just bought a multitool. Great ideas for its use.
Thanks Alan, You will not regret buying the multi tool, literally hundreds of uses, my video was just a quick introduction as to some of the many uses. Thanks for the comment ! 👍
Same here. I want one even more now!
Very useful, thank you as I have found finding good attachments difficult to find.
Glad it was helpful and thanks for the comment Matthew 👍
Excellent video , very helpful. Thanks
Glad it was helpful!
Great video. It's made me realise how much I've been missing one of these.
Glad you enjoyed it and thanks for the comment 👍😎
I prefer to use the wrong blade for each job to make the job more challenging.
Same here mate
Thanks for the tips
No problem 👍😎 you can see the newer version of the video here ua-cam.com/video/7ePCaiS7Mfo/v-deo.html
Thanks for taking the time to make this video - helpful in trying to work out if i need a multi-tool for my next job, and now I have watched this I think I do!
I think everyone needs this tool, they are SO versatile - thanks for the comment, much appreciated ! 😃
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Wow, I never knew I needed one of these until now. Thanks!
Yes, they are a must have tool with SO many uses - thanks for the comment ! 👍😃
All in one: Multitool Geare
multigear.kckb.st/3f9ba7de
When this tool
Turned up honestly my excitement like cutting skirting board that’s in place or notching walls and floors ,,, but releasing nails or screws never crossed my mind
Genius and the fence panel
Removal great call ,, I think everybody should share there tips 😊
Thanks for the comment Robert 👍
Thanks 🙏 heaps. Very helpful.
Glad it was helpful!
Ive had a multi tool for a year to scrape off artex but I got scared of the dust. so it been in it’s box but thanks, now I know what I can do with it.
Thanks for the comment David
Great video as always!
Thanks Ryan 👍😃
Cheers pal , i'll be getting one of these 👍
You will find many uses for it buddy ! Thanks for the comment 👍
Great demo! Dewalt should be paying you for this video! I'm going to go buy one now since I already have some batttery powered Dewalt tools. Thanks!
Thank you!
Good point, me too
Glad i bought one with multiple blades. I have a kitchen remodeling project coming up and I am actually excited to use it.
Good choice! 👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Great stuff! Thanks mate
My pleasure!👍
Really informative cheers fella
No problem Cyril, thanks for the comment 👍
thanks I learn alot from this great video.
Glad it was helpful!
Great informational video, thank you 👍
Glad it was helpful!
I see I need to get more acquainted with his tool. Thanks for the idea!!!
No problem, thanks for the comment 👍
Thank you for a well put together and informative video. I learned a lot.
Glad it was helpful!
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Thanks for the video!
You're very welcome, thanks for the comment ! 👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Thanks a lot. Never knew how much I needed this tool until watching your vid.
Glad I could help, and I hope you go on to find lots of uses for it ! Thanks for the comment 👍
@@Bacrenfencing for sure. I’ve used it so many times since watching you video
Great vid thanks
No problem 👍
Excellent mate, cheers 👍
No problem Arthur, thanks for the comment 👍😀
I work under suspended flooring a lot so usually cut a hatch in the floorboards on the joists. Used to use a circular saw but that’s too messy and easy to damage the boards. I use an Erbauer multi tool it’s really accurate if you take care and time when cutting. Great video, motivated me to sort the grout in the bathroom 😄👍
Thanks Lee, Yes, they are great for cutting sections of floor board / Chipboard but I tend to use my mini circular saw for that now, unless access is restricted. Good luck with the grout removal..........can be very tedious 😂👍
yea but the B5 S4 though Lee lol
Thank u so much! Good video!
Glad it was helpful! 👍
Thanks. Moved to a city apartment and had to give up living in a house with a proper workshop. Now I'm looking for small tools. I think this might just be the winner.
It is definitely a great tool with SO many uses - thanks for the comment 👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Thanks for a useful video.
Glad it was helpful! 👍
Cheers for this mate, I am brand new to this tool; this video was so valuable 👍
Glad it was helpful Bryan, thanks for the comment
Really good show, very informative. Thank you, Cheers!
Thanks for the comment !
Awesome video. Few new ideas for me.
Thanks Max, I just highlighted a few small uses for this tool, there are literally hundreds of things this could be used for - Great tool, a must have for all Trades and DIY'ers in my opinion ! 👍
Great video... thanks
Glad you liked it! 👍
Greetings from Ireland! What an excellent video 👍 - Thanks a million for going to the bother of sharing your knowledge. Tom
Glad it was helpful Tom, give my love to the Emerald Isle !
Whoa. This will do anything a jigsaw could, right? This blew my mind. AlrIf I need to buy 1 saw, is this it? Craft stuff, too?
Yes, good for all sorts of work, would be great for crafts !
@@Bacrenfencing thank you, dude! Walmart has a corded one for $23, about the price of a jigsaw I had my eyes on. I would prefer cordless but budget is budget and I’d rather be able to do the work vs not doing the work!
Great video! Many of your suggestions are situations that I have been in and not thought to use my multitool. Others are projects on my list that you just made easier for me.
Thanks for the comment and I am glad the video was of some use to you - thanks again, much appreciated 👍
Hey Brother thanks for taking your time to show all viewers how to use the oscillating tool.Your demonstrations are very informative and I like them. I wonder though if I could please ask that you please speak more loudly. It's obvious that you are a gentle gentleman so quiet speec is your thing. But there are some who are somewhat hard of hearing, live next to noisy areas and have a wee difficulty understanding a really sweet strong Scottish burr. But you have done a great job of sharing your valuable information. Thank you Brother. I think I'll raise a wee glass of Glenffidich to you.😄😉👍
Thanks for the kind words Rockey. I think the volume levels were all screwed up in that particular video, so I will do my best to even these out on future videos. Ahh Glenfiddich, one of my favourite drams !! 👍😎
Just researching to buy a multitool great video
Thanks Iain, it is just one of those tools that every household should have access to - there are so many uses, it is a no brainer to own one IMO. I hope you get one, you will not regret it. 👍😎
Excellent video brother. Now I'm gonna get me one. 😃👍
Go for it! 😍👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
i m sure.. to get this tool in my inventory asap.!
You will not regret it - it is a fantastic tool !
I never seen a multi tool before.
Me likey....👍
Great, thanks for the comment ! 👍😀
Really really useful video. Currently trying to replace a cistern with rusty wing nuts so will buy this to cut them off.
Glad it helped 👍
Wish me luck!
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
This is REAL. This is PRACTICAL.
Thank you for the comment, much appreciated 👍😃
Great vid
Thanks !
helpful. many thanks
You're welcome! 👍😎
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
Sparky here....this is the best tool you can have. Its so versatile. Great video mate 👍
Thanks James, yes, I would be lost without mine, it really is a MUST HAVE tool - thanks for the comment buddy !
@@Bacrenfencing no worries mate all the best! 👍
All in one: Multitool Gear
multigear.kckb.st/3f9ba7de
I'm going to try and sharpen knives with the tool. My kitchen and EDC knives.
Perfect!
Excellent, practical and *lean* video. Thank you. I'm deciding whether to buy a multi-tool, so here's a question for you ... is the multi-tool good at clearing a margin of plaster off breeze blocks to set-in mesh lath prior to patching over big cracks (10mm wide or so)?
Thanks for the video =)
My pleasure!
Many thanks from an involuntary diy-er for taking a 'lo-fi' approach to explanation..
Glad it was helpful!
I have used it to sharpen dull utility blades by holding the blade securely by pliers then making 2 angled passes from top towards the bottom per side using 240 grit paper ( I try to match original blade angles)
Good Tip, thanks for the comment 👍
Excellent
Thank you so much 😀