Harbor Freight Pipe Bender Best Method - Handrail Build Start To Finish - Smooth Bends Every Time!
Вставка
- Опубліковано 5 лис 2022
- How to use a pipe bender to get smooth bends - No Sand - Watch as I make this handrail from start to finish.
Products used in this video -
Links-
Similar pipe bender from amazon - amzn.to/3tmHMwZ
Pipe Bender from Harbor Freight - www.harborfreight.com/12-ton-...
Deburring tool - amzn.to/3TKBbaE
Noga Deburring tool - amzn.to/3skL6YT
Tig Welding Gloves - amzn.to/3F6gbqD
Thick Welding Gloves - amzn.to/3gCxy8f
New UA-cam Channel- Right On Pizza 🍕
/ @rightonpizza
My website
Rightonwithjoncrane.com
Email -
Jon@rightonwithjoncrane.com
This is the only video where somone shows what they're doing and shows no kinks at all , best video on pipe bending
Right On! 🙌 Thanks for the compliment! I appreciate it!
You're the, "FIRST" UTUBER WITH A SHOW THAT HAS REFERENCE UTUBE AS A GO TO SOURCE OF Valuable info they use to learn DIY hands on skills/whatever...others stumble along wasting time when the could have used this wonderful resource...Hope Momma doing well, tanks for sharing
Right On Tom! 👍🙌 Yes UA-cam is an amazing resource! Even if it’s something I know how to do there might be a better way or some useful tips. I’ve learned so much on UA-cam. Mama cat is doing really good! She’s fixed now and enjoying retirement! 😄 Lots of chasing squirrels 🐿!!
Good demo, should've capped the ends... Agree with fastcap, DeWalt anchor bolts, easy pease... Nice job..
Grits from Poland. Excellent job.
Made hundreds of feet of handrails back in the day but it was always using fittings, never used a bender but it looks like fun.
Right On Raw Bacon! 🥓 Those fittings are nice! This bender is a little crude but with a little persuasion it gets the job done ✅🙌
wow wow wow...I learned so much from this video, thank you so much...
I had a bender like your I bought 24 years ago, never thought to mark out
in 1 inch increments like you did, I just tried doing in one shot......
best wishes from Florida, Paul
That’s a great way to do those bends without having a very expensive bender. Nice that you showed how to generate the radius you needed. With expensive tube benders you need the radius dies required and they too are expensive. My only comment would be to have an air over hydraulic cylinder. Sure saves time and effort. BTW Harbor Freight I believe makes a nice knob to open the valve. I made my own before I found out you can buy them. However being a toolmaker it was just another fun little project. Great Video though !
Right On! 🙌 Thanks and that’s a great tip about closing the valve with a knob. I will look at Harbor Freight or make one. Thanks for the comment!
@@RightOnJonCrane 👍🏼👍🏼
Best video I've seen to date. Helped me alot . Thank you
Hey Right On! 🙌 Thats great to hear and I and I appreciate the comment!
kinked a few top rails, thanks for this clip, it saved me from wasting more money.
Thank you best video..Papua New Guinea❤
Followed your method to build my railing. Thank you, it worked perfectly
Very nice build. Lots of cool tricks in the fabrication world. I've been working on making a Hossfeld bender. I have the frames done and now working on some of the tooling.
Oh right on! 👍 That is great. Those benders are awesome. I used to work in a shop that had one. All the amazing things that can be made. There are some good old instructional videos on UA-cam about the hossfeld bender.
Excellent work mate very helpful indeed!
Right On! 🙌 Thanks for the nice comment!!
Great looking railing. And made for life!
Very good tutorial, I am about to make my first tube bending project and I this method will also work with aluminum tubing. Thank you for sharing...
Hey right on! 👍 That’s cool. It’s not the fastest method but slow and steady wins the race! 🙌 Thanks for watching and hope your project comes out great.
For marking steel I like to sharpen the tip on a 3 point file with a grinder and make it into a scribe, then use the scribe to scratch the mark directly into the steel. Eliminates the problems with thick paint markers, which can lead to errors in your final product.
I think the machining industry term is "tolerance stacking".
If you've ever plotted multiple azimuths on a map with a thick pencil line, all the differences add up. I learned from experience to use a mechanical pencil to save myself a lot of walking and/or getting lost. A lot of skills you learn overlap into other disciplines.
Why would you overcomplicate this? Leave it to metal workers to give people advice.
Beautiful shop, and thank you for sharing your knowledge. Hopefully, my bullbar on my project International Scout 2 turns out well.
Thanks for the tips (nice welds too)
Very nice work! How did u conclude that you needed 15 pumps… was it just trial and error for that pipe or some kind of formula?
Hi Jon ☺, neat job my friend, and looked right on when fitted, those pipe benders make easy work of it. Good to see you again, stay safe, best wishe's to you and your's, Stuart UK.
Right On Stuart! Always good to hear from you. 👍🙌
Your level of precison amazes me. I am so impatient, no doubt i would rush thing and try and make that 90 in one shot. Outstanding work. Cheers
Right On Joe! 🙌👍✨ Thanks for watching. I appreciate the kind compliments! Hope all is great in Florida! 🍊
Great tips in this video!
Very nice job Jon. Your welding looked great! Right On Jon!!👍😎🇺🇸
Right On Roger! 👍 Thanks! 🙌 ⚡️⚡️⚡️⚡️
Looks great!
Best video and only one!!!!!
Real nice job Jon. Nice demo with the bender.😊😊😊😊😊😊😊
Right On Randy! 👍 I’ve got a backlog of lots of videos. Just need to sit and edit. Lots of work in the shop lately.
Very enjoyable and interesting. Thanks for showing us.
Right On Tony! 🙌👍 Thanks for watching!
Nice job !
Another nice job...just need more...🖖
Right On Chuck! 🙌👍 Right! 🖐🖐
9:0 5, love that Wells Saw
Awesome project Jon! I went to buy a small piece of Black Pipe yesterday and was shocked at the price! They must think it's Brass! Crazy... Great stuff
Right On John! Thanks! 👍🙌 Yeah steel prices are way up! That cheap black pipe ain’t cheap anymore. 😳 At least plywood isn’t $110 for a 1/2 sheet!
Nicely done Bud!! Jon Crane will figure it out!!☻
Right On Roadking! 👍✨ No more slipping on those stairs!
Right on! 👍🏼
Nice bend 👍
Right On! 🙌Thanks!
great video. I have been thinking about cutting a viewing port so I can more easily measure the angle of my bend. Don't think it will compromise the strength of the bender. What do you think?
Can this method be used for a shallow arc? Would it be the same number of pumps for each bend or would the throw be different for each bend?
Where did you get those clips for the metal ruler???
very nicely explained how to use a bender, 90 percent of the video is explained incorrectly, I believe that you need to know how to handle this bender and most of us don't know...
👍👍
What schedule is pipe
Right On John! It’s schedule 40 👍
3k Likes 👍
My harbor freight bender leaks oil everywhere if I put it on its side, even though it has feet for that exact purpose, and the manual says it will do that and to NOT lay it dow.
What happened? Is the new version worse?
Yes, mine leaks a little too! There is a modification that can be made by adding a tube inside. It makes it so the Jack can also be used upside down. Perhaps I’ll dig into it and make a video! 🙌
Fast Cap??? They make that glue. P2-10??? They make rulers? Gotta see what all they make.
Right On Alex! Yeah, Fastcap makes all kinds of cool things! Check ‘em out!
Im completely torn between the more rugged ethic DIY cheap way for clout, or just dropping 2k+ for baller status lol... i only have an off road bumper planned for now, but if i buy a nice one ill probably open the door for more projects...
Oh get the nice one! 🙌✨ This one will get ya through for the short while but if possible get the goods. 👏