Very nice job. I especially like your technique with the glue and activator. You only spray activator on a few parts clearly to hold in place while the the rest of the glue sets naturally. I also like the clamp against the architrave whilst you get the inside fixing….. smooth! I was hoping to see how you trimmed the excess from the iron on edge banding…. Maybe next time . Love you work man👍🏻
Thank you very much!I have other videos showing that you can check out,for example sliding wardrobe ones ,thanks for watching and commenting on my videos 🙏🙏
Nicely done , i pretty much do the exact same work as you , festool everything, recently added the new cordless table saw , it's a game changer , excellent extraction for indoor use and makes very fast work of fillers , carvex not Been out the systainer since 👍
That's funny to me! If the tool works that's the one I want to use, sponsored or not. Keep up the good work, you remind me of why I'm still love doing this at 63 !!
I subscribe your channel. Great pleasure to watch your job. Please don't stop making new videos. Btw. what is this green device to measure distance of 20mm?
Esperando te encuentres bien , es agradable ver que lo haces con pasion y lo necesario para dejar satisfecho a tus clientes. por otra parte a que medida dejas las patas de la base????, bendiciones!!!
Great work! Do you work with furniture designer or the project is done by you from the start, like you buy standart size panels or kitchen boxes and then you work it out if needed while fitting it on the spot?
Hey there,thanks have a look on my amazon link www.amazon.co.uk/shop/cavjoinery/photo/amzn1.shoppablemedia.v1.04b78fba-e593-4edc-8b64-83bddfc87a69?ref_=cm_sw_r_cp_ud_aipsfphoto_aipsfcavjoinery_3ET9MR4DZTWDYJF46MGQ
Was ist das für eine Schablone zum einstellen der Schranküberstände ? Hab dafür eine einstellbare Metalllehre , aber das kleine Teil ist viel praktischer…. Wo gibt es das ?
Very nice job. I especially like your technique with the glue and activator. You only spray activator on a few parts clearly to hold in place while the the rest of the glue sets naturally. I also like the clamp against the architrave whilst you get the inside fixing….. smooth! I was hoping to see how you trimmed the excess from the iron on edge banding…. Maybe next time . Love you work man👍🏻
Thank you very much!I have other videos showing that you can check out,for example sliding wardrobe ones ,thanks for watching and commenting on my videos 🙏🙏
Genius! Excelent work. The best that i see in you tube. Grettings from Argentina
Thank you! Cheers!
As usual making look everything easy to do. And as usual just next level s skills with amazing results
Thank you so much 😊 nice compliment 🙏🙏
Nicely done , i pretty much do the exact same work as you , festool everything, recently added the new cordless table saw , it's a game changer , excellent extraction for indoor use and makes very fast work of fillers , carvex not Been out the systainer since 👍
Alright I get it thanks for watching and sharing your opinion and experience
Great job pal. What is the blue base on the track saw mate
Thank you , well acti tried to mask the tools as many people think I’m sponsored by festool 🤷🏻♂️😂
🤣🤣🤣.
👏👏👏👏👏👏👏👏
Extraordinário...🇧🇷🇧🇷
Thank you for watching 🙏🙏
As always cool video 👍😉
Thank you 😊
Always enjoy your great work, but what is up with the blue plate on your track saw...lol
Good question! I get a lot of people saying that i am sponsored by the festool so i removed all the labels and dye them :)))
That's funny to me!
If the tool works that's the one I want to use, sponsored or not. Keep up the good work, you remind me of why I'm still love doing this at 63 !!
Hats off Sir, as always
Thank you sir 🙏
I subscribe your channel. Great pleasure to watch your job. Please don't stop making new videos. Btw. what is this green device to measure distance of 20mm?
Thank you so much, I will, here amazon link for it amzn.to/3QKiCEM
👍👏 Magnifique 💪👏💪 Magnifique 👍👏
Thank you 🙏
@@CAVjoinery Merci beaucoup A Vous 🤲❤️
Esperando te encuentres bien , es agradable ver que lo haces con pasion y lo necesario para dejar satisfecho a tus clientes. por otra parte a que medida dejas las patas de la base????, bendiciones!!!
Thanks i left 100 mm
Hey - Great Job - What is the exact name of this green thing in your hand at 3:36?
Margin tool is called here is an amazon link for it amzn.to/3RUNUIr
Great job
Thanks 🙏
Hi. What was the jig that you showed on 3:37?
Hi here is amazon link amzn.to/3QKiCEM
Love watching you work. Where do you get your kitchens from
Thanks,from home design
Where can I buy the green adjustment gadget at 3:35 in the video?
Here is amazon affiliate link amzn.to/3QKiCEM
Great work! Do you work with furniture designer or the project is done by you from the start, like you buy standart size panels or kitchen boxes and then you work it out if needed while fitting it on the spot?
No i just fit them
Amazing work as usual! Where did you get your scribe block from?
Hey there,thanks have a look on my amazon link www.amazon.co.uk/shop/cavjoinery/photo/amzn1.shoppablemedia.v1.04b78fba-e593-4edc-8b64-83bddfc87a69?ref_=cm_sw_r_cp_ud_aipsfphoto_aipsfcavjoinery_3ET9MR4DZTWDYJF46MGQ
good job
from morocco
Thank you same from here uk 👍👌
Great job..how can we engage you if need be on projects like this .
Im looking to make something similar. What do you use to make the cabinets and where can i buy it? Thankyou
Chipboard laminate are called
Great vid, where did you purchase the doors and pannel s from.
Thank you i got them from home design hq actually they get them from somewhere
Thanks, just starting out and just trying to find suppliers, anywhere else you would recommend?
Good job!! Where do you get your materials from?
Thanks from home design hq
Hello would love to see your process for levelling everything?
Ok I will do a video in the next day with some info thanks 🙏
Beautiful job. What glue you use? Thanks
Hey there I was send from tiktok shop guy like 10 bottles of that called OILY GLUE
Thank you for watching
@@CAVjoinery Thank you. Pleasure to watch you work.
Where do you order those panels? Does anybody know if something like that in the United States?
No I think they are not that common in the states thanks called laminate boards
Was ist das für eine Schablone zum einstellen der Schranküberstände ? Hab dafür eine einstellbare Metalllehre , aber das kleine Teil ist viel praktischer…. Wo gibt es das ?
Be more precise sir I didn’t understand what you were referring about,sorry and thanks for watching
Bonjour A Vous Merci A Vous Pour Votre Magnifique Videos 📽️ Toujours UN Grand Plaisir A Regarder 🤲👍💪👏
Thank you so much for supporting me channel by commenting on my videos and watching em 🙏🙏
@@CAVjoinery Merci beaucoup A Vous 🤲❤️
You just work for someone else amd fit things (very well), or you create everythimg? Im curious bout that
No on this one no but the smal projects thanaks so much
Buen trabajo
Thank you 🙏
Маэстро 👏👏👏👏👏👏👏😁👍🤝
Thank you so much ☺️
Getirdin pis zemin üstüne yeni dolap koydun hiç oldu mu ?
Sorry?
@@CAVjoinery No problem, it's very nice
Шканти, релігія заважає ставити?
Sorry didn’t understand
i work interior furniture, do you need people at work?
No thx
Thanks for muting the audio when running the saw!
No worries!!😉
To hang units off so far with L brackets.. I take it your worktops are always 616mm.
There’s no kitchen here and always a reason for that like ; hob sink gola etc
Класс!
Thanks 🙏
Custom out of a box 😂
Yap