Thanks for posting this I just fitted trepanels and concealed a cupboard door, followed video and managed it myself. Just waiting on Amazon delivery with door closures, job done 👍
The panel you have in your hand for the first fit 60 cm wide by 240 high is £102.99, I would need 11 boards for my 7 meter wall.. WOW.. over a 1100 quid plus the extras I will pass and make it myself thank you for 1/3 the price with MDF and slats.
Question: did you put panel against the hinge, or on top of hinge? I can’t tell from watching but the 1 gap looks larger. It seems like when next to hinge, the gap is so big it really stands out
Tried to do this but the door wont open 90 degrees as its been obstructed by the black foam backing as it opens, not sure if its because I'm using concealed hinges rather than butt hinges?? Done everything as seen in this video, anyone else have this issue.
What would happen if you put the joint on the opposite side of the door? So not on the hinge point but the opening point. Seems more intuitive to me. So when you close the door fully there is some overlap between the wall panel and openening side of the door.
The method shown is the DIY way. To do this you need to use a SOSS hinge and ideally, use a door of a certain size so to keep all gaps in panelling the same. SOSS hinges are a hidden hinge without the knuckles. This is how us joiners do it👍
Loved the work. So perfectly done. I'm going to use the technique for my bedroom. Thank you very much. Keep posting such videos. Liked and subscribed too. This is Vijay from City-Visakhapatnam, State-Andhra Pradesh, Country-India.
Hi, the panels are made from felt and MDF with a real wood veneer coating. You can find more info on our website: www.wallsandfloors.co.uk/wall-panels. Thanks, Emily
These are the wrong hinges for the application. I've been researching and a regular hinge like this If it's installed tight and not larger gapped as shown here, the material would hit itself. I'm in the same project currently.
I know it was an advert but even so, that was poor. 1)Craig didn’t know the correct word ‘architrave’ 2) He also couldn’t use a drill or driver 3) Leaving the section above the door uncut was lazy and felt like the film crew just wanted it done 4) Those magnetic things at the end should have been embedded somehow - again lazy. 5) No thought given at all about how bad it’ll look when the door is open - loads of ways to sort that out.
Thanks for posting this I just fitted trepanels and concealed a cupboard door, followed video and managed it myself. Just waiting on Amazon delivery with door closures, job done 👍
Love the energy in this video, so engaging!
The panel you have in your hand for the first fit 60 cm wide by 240 high is £102.99, I would need 11 boards for my 7 meter wall.. WOW.. over a 1100 quid plus the extras I will pass and make it myself thank you for 1/3 the price with MDF and slats.
Good call when you see it up close it looks cheap and nasty... much better real wood
Question: did you put panel against the hinge, or on top of hinge? I can’t tell from watching but the 1 gap looks larger. It seems like when next to hinge, the gap is so big it really stands out
Yep - I hate that it stands out so much against the rest of the slats
How much gap are you leaving at the ceiling for the door to open, you are not showing the finished job, floor to ceiling
How about if the door is opening inside ? Great video by the way
You can see where the door is because the gap is slightly bigger to allow for the door to open fully . But still looks the part craig 👌👍.
Nah looks crap, it's a shame you can't get a slightly wider gapped panel. I'd make my own instead
What do you do if you want to open the door from the other side is it as simple as pushing it
Thanks for this awesome video. Just wondering if I missed it...did you glue the panel to the door or just screw it?
Hi, Craig just glued them but you could use screws too. Thanks, Emily
Exactly what I needed! I'm going to use the technique to conceal the love dungeon. ^_^
We know...
Tried to do this but the door wont open 90 degrees as its been obstructed by the black foam backing as it opens, not sure if its because I'm using concealed hinges rather than butt hinges?? Done everything as seen in this video, anyone else have this issue.
Good job am love it, hope I can find in US.
What would happen if you put the joint on the opposite side of the door? So not on the hinge point but the opening point. Seems more intuitive to me. So when you close the door fully there is some overlap between the wall panel and openening side of the door.
Can you show how to do a double door
thanks for the video, really informative. Question question, I have some power sockets and light switches, how do you account for these please?
You make cutouts. Lots of videos here on how to do that diy with MDF, black fabric and stained slats, and these usually include how to make cutouts.
But how do you open it from the other side?
Awesome video- thank you! I’m going to be using this to do the same thing 👍
Thanks for your comment! We hope it turns out well :)
how would you go about opening and closing from the other side ?
Yes please. I would like to use this solution for my bathroom door
Put a handle on the inside of the door. Thus, pull, then push to open. Pull the door closed and pull slightly harder to "click" the door closed.
The gap is bigger were the hinges are
The method shown is the DIY way. To do this you need to use a SOSS hinge and ideally, use a door of a certain size so to keep all gaps in panelling the same. SOSS hinges are a hidden hinge without the knuckles. This is how us joiners do it👍
I don't understand how the magnetic door catches work? Where do you fasten them to?
Loved the work. So perfectly done. I'm going to use the technique for my bedroom. Thank you very much. Keep posting such videos. Liked and subscribed too. This is Vijay from City-Visakhapatnam, State-Andhra Pradesh, Country-India.
Is the door solid or hollow?
Thanks! Exactly what I needed..💪
Glad it helped!
What to do when the hinge are showing ?
THANK YOU.
How can I get this in America
Where did you get the wood slats panels?
Hi, they're from Walls and Floors: www.wallsandfloors.co.uk/wall-panels. Thanks
May I know what is this acoustic panel material ya? Tq
Hi, the panels are made from felt and MDF with a real wood veneer coating. You can find more info on our website: www.wallsandfloors.co.uk/wall-panels. Thanks, Emily
The space left of the door is too big.
My thoughts exactly, stands right out!
But he said you are not going to notice, you should listen more.......😂 ffs
Agreed.. although I don’t see what else you could do if you want the door to open.
These are the wrong hinges for the application. I've been researching and a regular hinge like this If it's installed tight and not larger gapped as shown here, the material would hit itself. I'm in the same project currently.
Architrave not architrive good video pal
Good video, thanks.
So what happened to the door handle?
Dou you need the machine ?🎉🎉🎉
Why can’t Craig say architrave
o for orsim !
Can’t deal with how he says architrave 🤦🏼♂️ I’m a scouser and we do not say it like that!
I know it was an advert but even so, that was poor.
1)Craig didn’t know the correct word ‘architrave’
2) He also couldn’t use a drill or driver
3) Leaving the section above the door uncut was lazy and felt like the film crew just wanted it done
4) Those magnetic things at the end should have been embedded somehow - again lazy.
5) No thought given at all about how bad it’ll look when the door is open - loads of ways to sort that out.
Any questions feel free to ask away! 😁
Hi great video do you have a lot k for the magnetic lock
αξιος ο μισθος σου Αθανασιου
This chap is clueless