Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself. Keep these videos coming! Awesome job!!!!!!
Frank Villatoro thank you I'm glad the video helped. I make between five and 10 repair videos a week. It's very gratifying to be able to help. Thank you again for watching!
Outstanding video. I followed it and was able to replace my broken door lock actuator. It’s worth mentioning that those clips holding the harness in place break during removal, also one or two of the clips holding the door panel broke. And I have those trim removal tools. And the T20 tool needs to be long enough, I had to go get one during the disassemble process. Other than that, extremely helpful video, kudos to people like you!
I have done a couple of these and am about to start another right now. BE careful with that little silver set screw on the door handle carrier! I tightened one down to much and it broke the plastic door handle carrier. Just tighten until snug. Once it twisted off there was no going back with the replacement part! Great video and instruction Brian.
Great video...all the steps, moving at a good pace without too much editorializing. This made it easy, and it was good to learn that I wouldn't need to drill out and then replace the rivets like on some other door panels/window regulator systems. Did this on a 2006 Mercedes ML500 (w164) to replace the door lock actuator with a new (non-mercedes) ~$80 part. This is the NOT keyless-go version.
Really appreciate this video buddy, many thanks! Unfortunately the spring was fine in mine, so I had to do the job again with a new actuator, but that worked perfect. I wouldn't have been able to do it without your help. I did seem to struggle with the 3 black clips holding the actuator to the door skin. I had to put a trim tool in behind to pull it off, and then in order to put the new one on, I used a socket on one side, and a hammer on the other, to get the black clips to push in. Hard to explain with writing, but I got there in the end. Cheers mate!
Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself.
Thank you very much for this video. It was a pain in the butt task but followed everything here and it all worked through. Again, we appreciate it. Me and my daughter who was assisting me.
Outstanding vid, worked a treat for me, I really am impressed by both the vid and myself👍 fir attempting the job . One door down 3 to go , already save a small fortune, my issue was the very cheap actuator spring around £2.50 each here in the UK and your vid was soooo helpful I now have the courage to do the other 3, thanks again you’re a diamond , Best G.
This job is not for the faint-hearted, requires lots of mechanical skills to do such work. Anyways you did a very impressive step by step job. Definitely worth the hassle.
There is an important and tricky step of removing the door handle, and subsequently how to pull the whole metal cover out of the door with door lock and actuator assembly with it. It's not shown in this video.
This is why I work hard 4 someone else to do the work. This is alot & well worth paying someone. This video should help people understand why luxury cars cost so much to maintain. Great Video!!!
Thx for the really clear video. I've refitted my replacement part and offered it up with all the cables connected yet I'm getting no response from the lock attuator. I didn't plug in the crash sensor. Any advice really welcome.
Thanks for the video it really helped me ,I am having problems with that one screw for the door handle lock is there a easy way to do this I cant get it to line up ,thanks for any help or suggestions you can give me
Brian, please do I have to replace the actuator on all doors of the vehicle or just the ones that are bouncing? Please help me with this well-sought answer? Thank you.
@@HowtoAutomotive Thank you. Both left and right front doors bounce when I press the key remote and they never lock. The driver's door doesn't even move when I press the remote. I'm trying to figure out if I need to buy the actuator for just the driver's side, or also the ones not moving when I hit the remote. Hope I'm not bothering you.
Do you have any experience with a 2004 MB ML350. My computer went out and the dealer kept it for six weeks and said the AAM can't be ordered from Germany (Obsolete). It has good engine and tranny with new tires, interior is clean. Is there any hope from any where, dealer won't try any used parts. It was suggested to find all like new computers from another vehicle that was working and replace all 4-5 computers. (VIN and Keys also need to be factored in.) Is that even possible?
Hi I’m following the video to replace the handle as the keyless is not working, I cannot get the lock out out of the door to be able to remove the handle, I have taken the panel of from behind and can’t see any clips to push, the car is the ML63, am I missing something?? Cheers Rich
Hello please i have a ml 350 2006 but i don’t know where i can find the lock actuator for the front driver the right passenger and the rear right passenger please if some one knows where i can buy them for a good price please let me know thanks
Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself.
Keep these videos coming! Awesome job!!!!!!
Frank Villatoro thank you I'm glad the video helped. I make between five and 10 repair videos a week. It's very gratifying to be able to help. Thank you again for watching!
One of the best DYI I've seen especially for an over engineered German pia design!
Outstanding video. I followed it and was able to replace my broken door lock actuator. It’s worth mentioning that those clips holding the harness in place break during removal, also one or two of the clips holding the door panel broke. And I have those trim removal tools. And the T20 tool needs to be long enough, I had to go get one during the disassemble process. Other than that, extremely helpful video, kudos to people like you!
After watching this video I now know I will be paying a professional to do this job I would have never guessed it was this much work
I have done a couple of these and am about to start another right now. BE careful with that little silver set screw on the door handle carrier! I tightened one down to much and it broke the plastic door handle carrier. Just tighten until snug. Once it twisted off there was no going back with the replacement part! Great video and instruction Brian.
Super thorough and well edited tutorial. Straight to the point without over complicating things.
Thanks!
Great video...all the steps, moving at a good pace without too much editorializing. This made it easy, and it was good to learn that I wouldn't need to drill out and then replace the rivets like on some other door panels/window regulator systems. Did this on a 2006 Mercedes ML500 (w164) to replace the door lock actuator with a new (non-mercedes) ~$80 part. This is the NOT keyless-go version.
Absolutely fantastic step by step. Took me just over an hour with full success on the first attempt. Thank you!
sam magna Glad the video helped. Thank you for watching!
Really appreciate this video buddy, many thanks! Unfortunately the spring was fine in mine, so I had to do the job again with a new actuator, but that worked perfect. I wouldn't have been able to do it without your help.
I did seem to struggle with the 3 black clips holding the actuator to the door skin. I had to put a trim tool in behind to pull it off, and then in order to put the new one on, I used a socket on one side, and a hammer on the other, to get the black clips to push in. Hard to explain with writing, but I got there in the end. Cheers mate!
Glad it all worked out. Definitely not an easy job. Thank you for watching!
Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself.
I’m glad the video was helpful I’d like to thank you for watching!
Thank you. The only way to may this easier is for you to do it for me. You Rock !!
Thank you very much for this video. It was a pain in the butt task but followed everything here and it all worked through. Again, we appreciate it. Me and my daughter who was assisting me.
Pete Smythe that’s awesome that you and your daughter work together. I do the same with my girls. Thank you for watching!
I always check with your site before I work on my ML ! Great video Brian !
Thank you!
Outstanding vid, worked a treat for me, I really am impressed by both the vid and myself👍 fir attempting the job .
One door down 3 to go , already save a small fortune, my issue was the very cheap actuator spring around £2.50 each here in the UK and your vid was soooo helpful I now have the courage to do the other 3, thanks again you’re a diamond , Best G.
Very very good and professional video. Thanks
Thank you, I am doing this job first thing in the morning at the shop. Saves me from checking alldata.
All data can be a pain. Thank you for watching!
Wow, you have put so much work into this excellent video. It's a hard enough job without filming it as well. Thank you very much.
This was an excellent video, got the job done for me, perfect video thank you
GP Bobcat glad the video was helpful. Thank you for watching!
This job is not for the faint-hearted, requires lots of mechanical skills to do such work. Anyways you did a very impressive step by step job. Definitely worth the hassle.
Perfect! Thank you for providing this video! Making my day a whole lot easier!
There is an important and tricky step of removing the door handle, and subsequently how to pull the whole metal cover out of the door with door lock and actuator assembly with it. It's not shown in this video.
This is why I work hard 4 someone else to do the work. This is alot & well worth paying someone. This video should help people understand why luxury cars cost so much to maintain. Great Video!!!
Thx for the really clear video. I've refitted my replacement part and offered it up with all the cables connected yet I'm getting no response from the lock attuator. I didn't plug in the crash sensor.
Any advice really welcome.
Hi brain. I can't find the part number in your link.can you help me out. I have 2009 gl450. It looks the same ,thanks
This is excellent. Thank you for this pro video.
Thanks for the video it really helped me ,I am having problems with that one screw for the door handle lock is there a easy way to do this I cant get it to line up ,thanks for any help or suggestions you can give me
Thanks a lot 🤙🏾👏👏👏
Hi, do you need to disconnect the battery when replacing actuators?
Yes
Great video. Thanks much.
Brian, please do I have to replace the actuator on all doors of the vehicle or just the ones that are bouncing? Please help me with this well-sought answer? Thank you.
Just the one giving you trouble.
@@HowtoAutomotive Thank you. Both left and right front doors bounce when I press the key remote and they never lock. The driver's door doesn't even move when I press the remote. I'm trying to figure out if I need to buy the actuator for just the driver's side, or also the ones not moving when I hit the remote. Hope I'm not bothering you.
great job brian
ian young thank you very much!
Do you have any experience with a 2004 MB ML350. My computer went out and the dealer kept it for six weeks and said the AAM can't be ordered from Germany (Obsolete). It has good engine and tranny with new tires, interior is clean. Is there any hope from any where, dealer won't try any used parts. It was suggested to find all like new computers from another vehicle that was working and replace all 4-5 computers. (VIN and Keys also need to be factored in.) Is that even possible?
That’s a tough one. I recommend finding a shop that does reprogramming in your area. They may be able to help.
Great video, thanks!!!!!
Thank you!
Hello Brian. I have a couple questions
Hi I’m following the video to replace the handle as the keyless is not working, I cannot get the lock out out of the door to be able to remove the handle, I have taken the panel of from behind and can’t see any clips to push, the car is the ML63, am I missing something??
Cheers Rich
Assuming I was to purchase the actuator with Keyless Go. How would I reprogram it to function with my key fob?
lol that's...not how it works
Super video
What a sweeeeeet video
Great job!!!!!
Frank Cook thank you!
Is this what I need to change if my passenger side power door lock does not lock (go up or down) either with the smart key or door lock switch?
Chaula Jinger most likely this is the problem. The only way to know for sure is testing.
Lifesaver!
Thank you Sir !
thank you share information.
is it possible the problem could just be the module?
Hello please i have a ml 350 2006 but i don’t know where i can find the lock actuator for the front driver the right passenger and the rear right passenger please if some one knows where i can buy them for a good price please let me know thanks
Brian i did not see the parts listed in the link
Johnny Simon Hi Johnny. I just checked it's the first affiliate link in the description.
Que ańo es este modelo
Thank you 😄
Abbas Atılgan thank you for watching! Did everything go smooth?
Thank you!
John Barba thank you for watching!! Did everything go smooth for you?
Wow 😮
That’s a whole lotta steps there, hey.
Yes there is. Thank you for watching!
999999