Scrap to Craft , Scroll Saw Project
Вставка
- Опубліковано 30 вер 2024
- Scrap Wood Scroll Saw Project
Steve Ramsey Video on Spray adhesive • Using cutting template...
drunkenwoodwor...
www.rhwoodshop....
www.thewoodwhis...
www.thecarmicha...
www.scrollsawwo...
Scroll Saw Sand Paper / klingsporswoodworkingshop
Music ,Will Ferrell Sings Por Ti Volare- Step Brothers • Will Ferrell Sings Por...
Wow, 9 yrs later...
I'm just staring my scroll saw journey and would love to know how/ where i can get this template. I have a saw similar to the one you are using in this video, yup it's an old one but budget friendly!
Thank you for this video!
I simply just google images off of Internet, make sure to purchase any patterns if I where to sell, but if it was for personal use for skill building, I just download it
I am a novice. I just started doing wood cutouts for door hangers, such as rabbits for Easter etc. I love your videos!!! I ordered the Olson 5" scroll saw assorted blades. I can't wait to try them to sand small tight areas!
Awesome, I would love to see your work, feel free to share on my FB or Tag me in Instagram , Thanks for checking it out, much appreciate
Great work. Been using the same scroll saw I bought with my parents when I was 13. Turned 31 5 days ago and haven't used it in awhile and slowly getting back into it. Love the hobby and seeing other people's work.
it keeps me sane lol, thanks for checking it out
hahah your song.... i laughed.... love it!! and awesome video thank you
lol, Thanks for checking it out
Nice project Sterling! Thanks for the mention! Can't wait to see your 2x4 project. It will be lots of fun seeing what everyone makes.
Still in my head what to make , got to get to lumber yard and get it going, I can't wait to see others as well, Good Luck
I Stumbled upon this channel, as i'm just starting out my journey. I would love to see what y'all make to maybe sell for fundraisers..TY so much.
Thanks for stopping and watching, and sharing, all the best
Loved the Stepbrothers song :)
I enjoyed the video and learning about the sander but most of all your choice of music. It's a pleasure to hear something nice as opposed to the rap crap alot of folks play.
Thanks for watching and the feed back, greatly appreciated
i tried google images, but i don't see a "browning" design like the one you cut out in this video. Do you know where i can find this silhouette? Also i was wondering if you have a video on the wagon panter i saw on your bog? thanks Lisa
The wagon was a Steve Ramsey design, I did that before i was making videos, but here is the link to Steves, ua-cam.com/video/IMKYVe5gloc/v-deo.html , and the silhouette was actually a bumper sticker, and I scanned it to my old computer and edited it in print shop, but that computer is dead, or I would be more than glad to send it to you, Thanks again for watching
golden oak? In these days, the darker the better. Or use a better wood and not have to stain it at all. Slap some Danish oil on that bitch and call it a night. Great video until the choice of stain. Very nice. Thanks!
+Dan Davis Thanks for checking it out, and the tip, always good to hear others insight
Nice little video ditch music make use of own voice you have a very pleasant voice pity to waist it cheers.
Thank you kindly
Will ferrel is such a good singer.
+Fred Lastname Love his movies as well, Funny Guy , Thanks for checking out my Scrolling
Boats and hoes!
Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍
Thanks so much, appreciate that
I'm looking at this same scroll saw. Can you cut through a sheet of plastic/plexiglass like about 1/4 thickness?
I have, just use low variable speed too fast will melt the plexiglass
@@SterlingsWoodcrafts TU!
Looks great! I just bought this machine and knew nothing about it. Very helpful.
Thank you, feel free to share your work. Love to see other peoples take on what I share.
Not sure how to share? I scrolled some feathers, then coated with colored epoxy. These will hang as a wind catcher below a scrolled wolf on a rock also covered in epoxy.
I was cutting a lot of 3/4” wood with my scroll saw ,so I attached a 3/4” board to the table and used another 3/4” of the blade.
How’s that working out for you seems like a smart idea, thanks for watching
@@SterlingsWoodcrafts very good I get at least twice the use out of my blades
This guy doesn't seem to like having fingers....
Appreciate you checking it out
If you tape the bord with blue painters tape before glueing the picture you can peal it off
thats a great tip, i just hate wasting that blue tape, Spray adhesive is cheaper for me, but you are correct , thanks so much for watching
I would like to get into scroll sawing but I don’t know where to get patterns. Can you give me some suggestions?
I started by Steve Good , all of his patterns are free and great for beginners, then you grow from there, Google steve good scrollsaw patterns
Sterling Davis - Thank you
Am I the first comment? Bahahaha! I dig the OG vibe of this one, dude!
From then to now I still can’t make a good video, but I sure do love the scroll lol
@@SterlingsWoodcrafts yeeeaaaaah baaaaaby! Cheers!
So good 😍❤️💕👌
Thanks so much for watching
You really should watch some videos on kickback before you loose your fingers.
Thanks for the feed back, I have since upgraded saws, and appreciate your concern, this was a long time ago, and have learned a lot since. All the Best Ronnie
Funny how simple and cost effective things are to make, (especially when you have 1000s of dollars worth of equipment to make it),...!!!!
Harbor Freight Scroll saw is 69.99 , and if you have a 20% coupon 55.99ish, thanks for checking it out
I just purchased a scroll saw off of Craigslist. I am a 58 year old grandma that just recently bought my first home. I have always thought about having a little wood working shop in my garage so I started with a scroll saw. I am kinda afraid to start since the only knowledge I have is off of the internet. Your video made it seem so simple. Thanks for help in getting my butt in gear! Look forward to watching your other videos!
Thanks so much, just take it slow, Steve Good was a great inspiration for me, just hang in there and Please share you work with me, I would love to see what you come up with, Thank You for believing in what I do, I never thought of myself as a teacher, I just enjoy sharing what I have learned, Appreciate your Kindness
Just picked up this same saw yesterday! #BOATSANDHOES
Awesome, happy scrolling friend , thanks for watching
Is there a link to that outline design perhaps?
I just googled deer head patterns and took the one I liked
How can I get by without a table saw, and little strength in my arms to use a manual one? Any ideas anyone?
If you have an idea of what you are wanting to scroll, you can get free cuts at most home centers , or order on line
***** THANK YOU - I didn't realise that. :)
How tall is your workbench? Trying to build one to put my scroll saw on and trying to figure out a good height for me. 6'0
Mine is 36 1/2 inches tall from the floor to the top of the bench, I have 3 1/2 inch caster wheels on it, so the bench itself is only 33 inches tall, I also us a Barrel stool type seat, it's the Craftsman Bar Stool Seat, works great for me , I am 6' 4, Thanks for the view
***** Thanks for the vid and info, just got a harbor freight scroll saw.
Awesome, feel free to share your projects to my Facebook page, Thanks and Happy Scrolling
ciao sei un grande, per caso ,ma solo x caso c è un sito x stampare i disegni
Thank You
Poor safety technique on that first cut.
Noted, I will do better
The fuckin' Catalina Wine mixer.
Lol, thanks for watching, appreciate the support
What's the name of Your jigsaw ?
Its a Harbor Freight Scroll Saw , Thanks for watching
Like seeing scroll saw projects.
Thanks for watching , Love my scroll saw, just fun to work with
So cool. I love this. Thank you!!
Thank you for your support and watching the video and for your kindness
It's the ******* Catalina Wine Mixer.
Will Ferrell Is Awesome lol, Thanks For Watching , Boats and ..... lol
Rather hear the saw working...
Noted
Look like fun. Looking for a hobbie.
I enjoy it, thanks for checking it out
This is the harbor freight saw right?
Yes Sir, Thanks for watching
Quick question, I like the pattern and wondered where I can get it.
just email me, i will send a copy, Thanks for checking it out
Nice pattern, what is your email if you don't mind sending me a copy of the pattern?
Sterling Davis
Felicidades! muy bien hecho!
Thanks for watching
Cómo se llama esta figura?
Deer Doe Heart , thanks for watching
I do woodshop at school, you are way more skilled than me at scrollsawing, but i am pretty good
+Anvith Vobbilisetty I am sure your work is awesome, keep doing your thing, would love to see some of your work, feel free to share on my Facebook page, I am still very new to this and am so happy you enjoyed it, Much Appreciated
+Sterling Davis i don't have a Facebook but i can send a picture of some of my projects, I'm working on a spatula right now for my parents.subscribed
do you have an instagram , or other social media, you can find all mine at sterlingswoodcrafts.blogspot.com/ or you can email at sterling.davis@att.net, feel free to share your work
+Sterling Davis sure I can send a picture to with email
Hi boss, What kind of wood did these things made of?
+August N It was Pine, Thanks for checking it out
+Sterling Davis tks u so much
Wow great stuff. You’re in Gaston co. I live 40 mins away on lake Norman. Thanks for making this video I’m starting out doing scroll work.
keith Fuller Awesome, I visit there often, did a lot of fishing at the hot hole , appreciate you checking out my video and the positive vibes , all the best
thanks, i was just looking at this scroll saw on HrbFr8.com less than 5min ago (gonna be $56 bucks with my coupon) I clicked over to youtube to see if it would work for my needs; typed in easy scroll saw and your video was the 1st to catch my eye and what do you know you have the HFT saw. Great video. Now I know this will work for me. I will look for that sanding "blade" while I am there. Thanks again great video.
So glad you came across my video, and glad it helped you out, Mines a lot, Thanks for watching and Sharing
Where do you get the felt paper? I have not seen that
Klingspors in Hickory NC, it is made by Olsen , here is a link www.woodworkingshop.com/?inMed=GBRAND&gclid=CjwKCAjwiPbWBRBtEiwAJakcpFtdurXlp0L1sXEhDniwA0HlMtd6kZ2UFVyR99sKny_iTFnxclWh7RoCn-IQAvD_BwE
Sterling Davis your link did not work. I went to your link and did a search for felt paper and nothing came up
Great job Sterling. That came out really nice.
Thank You Buddy
Thanks for the scroll saw project. My grand daughter is going to be hooked. Now I need to get her a scroll saw of her own.
Awesome, would love to see her projects, fell free to share on my facebook page, Thanks for the view
Great job Sterling...I need to bolt my scroll saw down too. :-)
Yea lol, mine was dancing on the table, didn't realize it til I was done cutting, Thanks for watching
Just seen your great video, can you tell me where I can obtain the pattern for this please.
Regards, Joe.
I just google deer silhouette in google and saved the image I wanted , hope this helps
Great video! What brand blades do you recommend?
Great job Sterling. By the way what size blade are you using in this video. Also what size blade would you recommend for cutting out 5" to 8" letters and numbers. Cheers mate.
Thanks for watching, i believe this was a #2 reverse tooth Olsen blade , it depends on the wood you are cutting, but typically a #5 reverse blade would work
I am debating on getting myself a scroll saw. I have started doing a few little woodworking projects. You made it look very easy. Maybe I can do it! :) Thanks!
You can do it, i am very simply minded, and if I can do this, ANYONE can, if you do get one, I would love to see what you create , Thanks for watching and for your support
Hi Sterling awesome work! I just started scrolling and I wanted to see if you would give me any advice on turns. I have watched numerous videos and everyone turns the wood easily. When I try and turn the wood it turns the blade with it. Essentially the blade teeth turn to the side mostly when I try and turn the wood piece. It happens very often. I know you can only cut by pushing the wood into the machine very slowly but I try and change directions and it breaks a blade because the blade has turned or it doesnt cut how I want because the blade went with the wood. Any advice? Thank you
first, thanks for watching, appreciate that, as far as turns, Practice, Practice, Practice. It takes time, and a lot of different factors. The density of the wood, the blade size, your tension, figuring these things out take time, best thing i can say is, let the blade do its job, cut, don't force it, practice relief cuts vs making a turn, this will give you 2 options in a turn, as far as turning corners, simply trust the blade will do its job and turn the wood holding down firmly, You got this and Practice , so sorry for the delay, and hope this helps
Awesome I just got my second scroll saw long story short I never opened first one had it In till we bought new house old house got broke into when we moved it was stolen. Replaced it and started scrolling can believe I didn't try this 14yrs ago. Love the video loved the project let's see more.
Thanks so much be sure to make sure you’re sharing your stuff on your social medias too so other people can see and be inspired thanks for your support
Good vid - thanks. Have you tried 'repositionable' spray adhesive - works great for me and obviates the need for heat guns etc.
I have not, never really heard of it, i will have to check it out, thanks
Great tip with the heat gun on removing the adhesive, great project, thanks
Frank Doyle Thank You Frank, Appreciate you checking it out, Greatly Appreciated
Not sure how I came across your video. I know I've heard the name before but I guess I'm not a subscriber. Well... I am now. Thanks for sharing this project. And I'm glad you shared those scroll sanders. Those are pretty cool. I'll have to look into getting some of those.
Angie Overton Thank You for checking it out, and appreciate the Sub, hope you can find something i do useful for what you like doing , and I do love the sand strips
Nice work my friend
Appreciate it Jeffrey
Subbed and liked. Great job! How about a backlight behind it, would that work do you think? Cheers from down under.
never tried it, but will, thanks for the tip
I use that same crappy scroll saw. I wrestle with and get mad at it, but I just can't find a good enough reason to replace it.
It does get the job done in the end.
Thanks for all the great videos.
+Create Repair Improve Thanks for checking it out, and I am Diggin your videos as well, Newly Subscribed
+Sterling Davis
thank you!
Cool work I'm new to scrolling work myself still finding how to best work my machine enjoyed this thanks
Thanks so much, appreciate you checking it out
Nice pieace where did you get the pattern. I use blue painters tape than spray adhesive on than put my patern on and cut out. works grate.
I just saved it from the internet and resized it in inkscape, i googled Deer Doe Silhouette, Thanks for checking it out
That’s class. I’m in the market for a scroll saw and you’ve just given me another reason to buy one. Cheers
Have you been able to find one yet, I’ve upgraded several since this video and just enjoy the scrolling process, appreciate you watching and supporting my channel, all the best
Thank you for this video and what you stated at the end. I am working to build my channel and hearing you say that you were struggling and then another channel saw your video and then another and now you are where you are, but most importantly you thinking them for what they did is special. We are in this together, here in UA-cam Land and for those who help us we should give them their respect because they didn't have to help us. Also you have given me a great Idea for a gift and I will be displaying it soon.
Thank you so much for watching I apologize for the delay In my response greatly appreciate the view of you checking out my video and kind words
Great work! I have the same Scroll Saw, how often you tight the saw while working? Mine a lot of times... is normal? or I am doing somethig wrong? thanks!
Its just the saw, i have to tighten it often, when i use it, the vibrations cause it i guess, i have since upgrade to a Dewalt 788, and use the HB for Sanding with sanding strips , Thanks for checking it out
Ok, thanks!!
I used to have tons of scrap until i got one of these dam things..now my eyes are full of sawdust lol
All lot can be done with scraps, if you just give them a chance lol, Thanks for watching Scott
Thank You !
Hahaha love the background! Great job and explaining it all
+TrudefenseChris Thanks for checking it our Chris
Not sure if you'll see this since you posted this video 8 years ago but this video is absolutely amazing. The tutorial is great, you're humble and the music was brilliant. That movie is genius and even though I've seen it a million times the boats and hoes caught me off guard. What a wild ride, thanks buddy.
How do you say it, thanks so much for watching, I’ve upgraded scrollsaws a few times, I still have my trusty harbor freight Scrollsaw, thanks so much for the kindness and appreciate your support even after eight years lol
Fellow North Carolinian here, wanted to say thanks for the great video. Definitely trying this tomorrow. Just picked up a used (but in good working condition) delta variable speed 16" scroll saw from the pawn shop for a heck of a price and was looking for some ideas, and this is right up my alley. Thanks again, and keep up the fine work.
+Colton Paxton Awesome, Would love to see what you take on it will be, feel free to share to my FB Page
dear Sir.. tQ for sharing.. are u a full time wood craftsman? and do u sell ur handicrafts ..?? tQ
It is just a hobby for me, I wish I could do this full time, but i cant at this time, maybe down the road, appreciate you checking out my videos
I just watched your video on silhoutte cameo project inspiration facebook page. loved it, I'll be pulling the scroll saw back out right after Christmas. Thanks.
I missed where you got the sanding piece?
+NANCY MAKELA Thanks for checking it out, I get the Sand Paper from a Klingspor.s It is made By Olsen
Excellent video, nice and simple, beautiful work, greetings from El Salvador.
Thanks for checking it out, appreciate it very much
Receive Greetings Sir,
Clean neat and beautiful work.
Very much informative.
Regards,
Mahesh(Mumbai)
Appreciate that, thanks for watching
Yes! the scroll saw sanding pins are a MUST,love them..They've been around a long time..
They are Great, thanks for checking it out
This was pretty neat. I'm glad you decided to show the Olsen Sander, because I'm new to Scrolling & I primarily use the pinless saw blades for the sharp cuts & I sometimes end up with what looks like a chipmunk chewed on, LOL. I think it must be a common thing that we don't bolt our scroll saws down!
Appreciate you checking it out, have you tried a reverse skip tooth blade, that may help cut down on the Fuzzys
i bought a scroll saw for my shop 6 months ago, and finally used it tonight. My first project was this design. I am an avid woodworker, but have never used a scroll saw before. Project came out fairly decent, for it being my first! Definitely need to invest in the sanding tool made for a scroll saw, as I'm sure it would make sanding so much easier! Thanks for the inspiration!
Thanks for checking it out, feel free to share your work , i would love to see it
Thanks for a well done video. It might help if you had a better mike so the sound wasn't quite so hollow. Other than that, great job.
Thanks Ray , been working on that, and hope to get a new mic next week, thanks for the view
Great project - good looking wall plaque from scrap! I especially like your tip about removing the glued-on paper! I have gone crazy with sanding off my glued on paper templates so I will try your technique. I assume the heat gun works only with the spray on contact cement?
I only use it with spray, so i am not sure about on the other, thanks for checking it out
I got this same saw, just getting into wood work... When I do my curve cuts or 90° cuts may blade bends instead of staying straight... Any ideas how to fix this? I'm using the blade that came with it so maybe a better blade?
Its a great saw for the price, but the blades that come with it are junk , i used Olson Blades with this scroll saw, it could be the tension is not tight enough as well. I have upgraded to the DeWalt 788 and its like night and day, if you like scrolling, Upgrade when you can afford it, you will see as you do, the cuts, vibrations, and volume is so much better. Dont get me wrong, i loved my HF Scroll Saw, i just out grew it. Hope that helps out a little , Thanks for checking out my video
I must say, the sound on your video has improved greatly. It's truly enjoyable now. Thanks.
Thanks for sticking with me, I hope the continue to improve, appreciate the kind words
That was the weirdest version of Andre's song that I ever heard, but project was ok.
Will Ferrell , Step Brother's lol, Thanks for watching
Impressive, im think im might have to copy your idea and make a movie of this for my channel.. Great craftsmanship.
Thanks for checking it out, hope you had fun at Maker Central , All The Best
Great video, thats a really cool design,is there a site that I can print that from? It would make a nice gift, Thanks, keep up the good work.
+Ron Hager shoot me an email at sterling.davis@att.net and I will send you a copy to print out, Thanks for checking it out
Wary impressive! With those types of blade and that it is an entry level saw, you did a fantastic job, better then I ewer could hope for.
I am sure you would do just fine, the main thing is getting out in the shop and cutting some wood , Thanks for checking it out
This looks great!! I'm needing some star cut outs...do you sell those??
Thanks , If you know of a pattern, i will try it out, but I really am just a hobbyist at woodworking, still learning, this is all for fun, would love to help you, if wanted to email me sizes, I will see what i can do, Thanks for Watching and sharing, sterling.davis@att.net, or facebook Sterling Davis , and Sterling's Woodcrafts
Wow good job man
Thanks so much, all the best
Thanks for taking the time to make this video Sterling. A really nice piece. I do lots of wood work but I've never tried fret or scroll work. I've just bought a saw and I'm looking forward to doing projects like this.
I pride myself in making sure i comment to each person that took the time to comment, but for some reason, when i switched computers, it said i did not respond to your comment, for that I apologize , Thanks for watching and your support
Very nice work
Thank you for watching
Love your videos
Thanks for checking them out, and I greatly appreciate your support, All the Best !!!
Thank you for a very well explained and well thought out video. It was not until you had finished cutting that I saw the two deer and the heart. Wonderfu!.
Thank You for taking time to watch my video, Greatly Appreciated !!!
awesome !
if you were to make them to sell , what would they sell for approximately ?
I wouldnt know, depends on what you think you time and work is worth, Personally a basic cut out like this with out the frame, 10 bucks, 20 framed , but I wouldnt ever sale from image was not my own, unless i purchased it from the owner, thanks for checking it out
Thanks so much for posting this video and sharing your knowledge/information. I've been looking for a new hobby and I think I may just have found it! :-)
+dkcrooby1 Thanks for checking it out, It is a Fun and rewarding Hobby
Boats and Hoes!
lol, Thanks for checking it out
Great work
Thanks so much
nice finish pal
Thanks for checking it out
you cut out shapes from wood, sprayed glue, wood dye, & varnish, MASK?
I use an RZ Mask for the most part, sometimes when its a short project I dont, but it is an important part of my shop, Thanks for checking it out
Great work man. I have just started posting videos recently. Please check them out. Cheers.
Will Do, and My apologies for late response , i never say it til now, All the Best
You seem to do very well at the scroll saw. I'm wondering if you had a lot of practice over the past 30 years since you built the breadbox for your mother? Thanks for sharing.
No Practice, til now lol, and I try to scroll something daily, It is a lot of Fun, Greatly appreciate the kind words and support
Mine is a Dremel ,had ir for over 30 years no problems .love it
awesome, thanks for watching