I took the side panel off my PRL intake on my DE5 and it sounds fairly similar, which is quite a bit louder than with the side panel on. Obviously for warmer weather it's probably nice to have the enclosed box but the extra noises you get from a more open box on this car just makes it so much more fun.
@BrosFOURRSpeed Why would the intake need to be made in carbon fiber? Are you shaving off some weight? Better heat shielding? Because weight or dollar just doesn't make sense. Is it for bling? If it's for bling, then that's subjective. You are saying that it's for sound. It's ofc louder because it's an opened design. Here is the drawback though, FL5 engine compartment is so tight that it's gonna get the heat from other components. You'd on IAT to be as low as possible as this aint it.
the intake that was in there was PRL right? known to be one of the loudest so not even close to how stock sounds, way louder. Maybe this one is louder but no way the PRL is quite.
this intake is louder than the PRL because its not an enclosed box. Now performance wise, the PRL is definitely better with more direct airflow and louder than OEM. The oem is way too quiet.
@@ronniedawkins2537In getting the same intake temps as the PRL. This car runs hot and gets 40 degree above ambient even with the PRL. So since Armaspeed looks better and sounds better. I take that as a win 😎
Hello Guys since you have had the some of the Intakes that I have been looking into including the RamAir intake which AHC integra has on and that is similar to the ArmaSpeed . I'm Between the ArmaSpeed & RamAir & PRL .. which one do you think would be best for balance of performance & sound... you have had 2 of the 3 i like..what you guys opinion
Very nice sounds for sure BUT curious why they chose to leave the inside of the intake box unfinished ? I know its under the hood but aesthetically it leaves a little something to be desired.
Quick question, how does this FL5 compare to the 8Y rs3?! I know they’re different in a lot of ways but in your opinion what’s better. I’m torn between both for my next purchase
Probably similar. However this being carbon fiber, the sound will resonate better. We have one in stock too for USA customers ready to ship if you order it. Still have Black Friday deals on our site too!
That won't happen. Even in my old GTR I had the twin intakes where the filters sat behind the grille. You need to literally submerge the air filter in water for an issue to happen. With this design, there is zero water that could ever make it into the filter area. Not even a drop of rain. I'd have to drive through 3ft of water for an issue to happen
All fun choices! Type-R is much better than the WRX. Way better handling and driving feel and more comfforbtale. M3 is a beast and is my ideal choice one day!
@@BrosFOURRSpeed Thanks for the knowledge earned thru hard testing them. Canada (Toronto) is my home, safety leads me to the WRX (all wheel drive), will see...
Your welcome! We have a few items of the 11th Gen Si on our site at least. AWE exhaust, H&R springs. Hopefully I can get more intake brands who have Si parts!
They add power on some cars with no thing. Depends on how the ECU is setup. Turbo cars will benefit from an intake once tuned. Also I've been doing intakes for 15 years and they never make anything dirty
Yeah I know. But for me, since its the intake that was on it when I bought the car, it will be the intake I leave on the car in the future when I put the car back to stock and sell it. Armaspeed intake is worth more so I'd make more money selling that part separately then leaving the Armaspeed on the car and sell sign the PRL outright.
Wow, such a quick and easy install. It looks good under the hood and sounds great. I’m loving your Type R. 👍
Yeah it was an easy mod! Love it!
Great videos on this ride. I don't follow the brand but still get into your modification videos.
Glad you enjoyed the video! Definitely a good upgrade for the car!
I took the side panel off my PRL intake on my DE5 and it sounds fairly similar, which is quite a bit louder than with the side panel on. Obviously for warmer weather it's probably nice to have the enclosed box but the extra noises you get from a more open box on this car just makes it so much more fun.
Oh thats cool. Seems to have similar intake temps in the warm weather I did this
Get the feeling this civic going up the list your favourite cars on the market 👍
I am very impressed with it for sure! Thought it'd be fun to try out, but it's just a blast to drive! For sure up there ;)
Great to see you turning into a Honda Boy! 😊
haha the Type-R has been a lot of fun!
@
It shows in your videos that you had more fun in a Honda compared to your other expensive cars. I am happy for you. 🤘🏻
@@bigbunnyboi I think when factoring in the price of it, hard to beat such a good drivers car for an average price. Certainly a good bang for the buck
@
True! I used to own a EK civic sedan. Modified it to be a sleeper ride until I got into a wreck. Three times. 🤣
Dang bummer to see that! But cool platforms for sure!
800 bucks for an intake is insane....
Well it's carbon fiber. Eventuri and PLM are $1,600 and $1,300 each. Seems like Armaspeed offers a great value
Real carbon fiber ain’t cheap…
@BrosFOURRSpeed Why would the intake need to be made in carbon fiber? Are you shaving off some weight? Better heat shielding? Because weight or dollar just doesn't make sense. Is it for bling? If it's for bling, then that's subjective.
You are saying that it's for sound. It's ofc louder because it's an opened design. Here is the drawback though, FL5 engine compartment is so tight that it's gonna get the heat from other components. You'd on IAT to be as low as possible as this aint it.
Have you seen the other intakes on the market?
daaaaang. bro i wanna see the exhaust video already lol
Coming soon!
Sounds good👍
It does!
the intake that was in there was PRL right? known to be one of the loudest so not even close to how stock sounds, way louder. Maybe this one is louder but no way the PRL is quite.
this intake is louder than the PRL because its not an enclosed box. Now performance wise, the PRL is definitely better with more direct airflow and louder than OEM. The oem is way too quiet.
Armaspeed is significantly louder. And has the same intake air temps. And looks better being carbon fiber. So I’m definitely happy with the change
@@ronniedawkins2537In getting the same intake temps as the PRL. This car runs hot and gets 40 degree above ambient even with the PRL. So since Armaspeed looks better and sounds better. I take that as a win 😎
Hello Guys since you have had the some of the Intakes that I have been looking into including the RamAir intake which AHC integra has on and that is similar to the ArmaSpeed . I'm Between the ArmaSpeed & RamAir & PRL .. which one do you think would be best for balance of performance & sound... you have had 2 of the 3 i like..what you guys opinion
@ronniedawkins2537 what you thinkbof what I asked in the bottom??? Looking to get 1 of these intakes...
Very nice sounds for sure BUT curious why they chose to leave the inside of the intake box unfinished ? I know its under the hood but aesthetically it leaves a little something to be desired.
Yeah not sure. It's kinda cool how one side is raw carbon and the other in finished carbon
Quick question, how does this FL5 compare to the 8Y rs3?! I know they’re different in a lot of ways but in your opinion what’s better. I’m torn between both for my next purchase
I have a video coming in a few weeks on that! Very different levels of cars, but both awesome for each of their price points. So stay tuned!
Do you think Pipercross is as loud or louder?
Probably similar. However this being carbon fiber, the sound will resonate better. We have one in stock too for USA customers ready to ship if you order it. Still have Black Friday deals on our site too!
How about when its raining i think there is a tendency to snoop in the water particles in the sunktion
That won't happen. Even in my old GTR I had the twin intakes where the filters sat behind the grille. You need to literally submerge the air filter in water for an issue to happen. With this design, there is zero water that could ever make it into the filter area. Not even a drop of rain. I'd have to drive through 3ft of water for an issue to happen
wow that sounds great man. there's now a darth vader in it
Yeah it's so cool sounding now!
My hearts wants a 2023+ Honda Type R, my wife insists to get the 20222+ Subaru WRX Impreza, but my ego calls for the 2023+ BMW M3 manual🤣🤣🤣🤣
All fun choices! Type-R is much better than the WRX. Way better handling and driving feel and more comfforbtale. M3 is a beast and is my ideal choice one day!
@@BrosFOURRSpeed Thanks for the knowledge earned thru hard testing them. Canada (Toronto) is my home, safety leads me to the WRX (all wheel drive), will see...
@@silveriojohan yeah that’s a big plus if you do have snow
Why not just get a Hondata jailbreak with a base map for almost the same price?
One step at a time. But that could be something cool for sure!
@ that would void warranty though lol
Becuase that just makes more power, it doesnt make cool turbo nosies
I wish there was a non CF version I cant do $775 for an intake. maybe a discount code?
I can see what I can discount on this. Send us an email brosfourrspeed@gmail.com
Badazz
Thanks! Sounds amazing!
They dont make this for the civic si 11th gen
Just the Type-R 10th and 11th
@ man that sucks thank for the reply and nice type r very very well done 👍
Your welcome! We have a few items of the 11th Gen Si on our site at least. AWE exhaust, H&R springs. Hopefully I can get more intake brands who have Si parts!
According to the internetz ca intakes dont increase power and make you engine dirty
They add power on some cars with no thing. Depends on how the ECU is setup. Turbo cars will benefit from an intake once tuned. Also I've been doing intakes for 15 years and they never make anything dirty
Is this the guy from American pickers 😂
lol I've heard that before
@ no disrespect just a little resemblance can’t wait for you you lower the fl5 looks great with the spacers ! Looks clean keep
Up the good work
@@five0fives Lowering springs video has been posted 😎. Same with exhaust!
Sell me those PRL kit
I'll be keeping it for when the day comes to go back to stock.
Prl is not stock 😒@@BrosFOURRSpeed
Yeah I know. But for me, since its the intake that was on it when I bought the car, it will be the intake I leave on the car in the future when I put the car back to stock and sell it. Armaspeed intake is worth more so I'd make more money selling that part separately then leaving the Armaspeed on the car and sell sign the PRL outright.