Great to see these beautiful Alfa's / Busso's being preserved. Top man! I've done the same with a 156 V6 veloce wagon - you sorted me out with the air filter housing, thanks! Love the spec on this GTV and look so much better without the spoiler to me. Keep up the fantastic work and really informative vids, mate!
A glorious engine note. I loved working on these back in the late 90’s. The 24v is an absolute gem and those chrome inlet headers look fab. So pleased this one lives on.
Hey Niel, don't give up mate I love what you have produced and i'm waiting for my coupe to come out of quarantine and whilst i brought it from the UK I did get many photos of it.
It's a petty you did not clean the engine before sliding it into the body but I was really touched when you truned it on!! Great job! Greetings from Italy
@@ItaliaAutos Watch carefully at 7:40 you touch the rubber part of the fuel hose going to the rail with your right hand and a bit of fuel squirts out as it moves. Maybe you should go back and double check just to be on the safe side.
Glad I'm not the only one plagued by that damn injector light! Just about to put a new cam shaft sensor in my Twinspark, what a lovely job! Lets hope this works.
@@ItaliaAutos is it possible to replace the cam shaft sensor without removing the cam belt and all the other stuff on a 932 2.0 twinspark, as I've just been quoted £500 for it all to be changed
Good job! Engine sound is great. I have the same engine 156 2.5 V6 but the sound is not the same. Are the ehauxt system not connected? Thanks for sharing.
Nice to see it coming back from the other world ! I have a 156 V6 i'm working on, it has a very bad idling, lots of misfires but everything mecanical is good, sparks are good, new injectors, all sensors new, timing is good, heads redone, compression at 12-12.5 on every cylinder and no fault on ecu. Do you think the problem could be the ECU ?
@@ItaliaAutos I think I had the same expression as you when I got my cheap Thesis running the other day , had been fighting it on and off for days. What keeps you going isn't it the satisfaction of a fix
Does it have equal length pipes and a Wizard system? I never knew a really early GTV had no DBW and also had EGR. My ex 95 164 Super had EGR but still had the old flap AFM. I guess when the 156 came they switched to DBW.
Good sound! Thinking about selling my fiat barchetta and getting an Alfa or something. Any good cars for students but fun to drive? Thinking about a GTV or GT
Hey everyone who is loving this. I have one for sale. Best car I have ever had. Owned it for 13 years, lots spent. Recently listed on autotrader. due to coronavirus job loss. So sad to have to sell this beautiful machine.
Gorgeous sound with that exhaust
Very loud.
It's unbelievable how great the old Arese V6 sounded.
Great to see these beautiful Alfa's / Busso's being preserved. Top man! I've done the same with a 156 V6 veloce wagon - you sorted me out with the air filter housing, thanks! Love the spec on this GTV and look so much better without the spoiler to me. Keep up the fantastic work and really informative vids, mate!
A glorious engine note. I loved working on these back in the late 90’s. The 24v is an absolute gem and those chrome inlet headers look fab. So pleased this one lives on.
awesome cars.
It looks gorgeous, even without the work on the bodywork yet. Gorgeous colour and the engine sounds fantastic!! Well done mate.
Thanks a lot!
Hey Niel, don't give up mate I love what you have produced and i'm waiting for my coupe to come out of quarantine and whilst i brought it from the UK I did get many photos of it.
Gorgeous car with an amazing sound. Totally deserves to be back on the road and saved!
Absolutely!
Nice to see that i am not the only one that ends up cutting myself when working on cars. Great vid
Right on
It's a petty you did not clean the engine before sliding it into the body but I was really touched when you truned it on!! Great job! Greetings from Italy
Right on.
sounds phenomenal.
it sure does.
Sounds lovely - nothign beats a good busso ;-)
You got that right!
Gorgeous Busso! What exhaust is fitted to it?
Ill have to ask the customer but its very loud. Not a daily driver sound.
@@ItaliaAutos love it. Something like that wouldn't be popular with the neighbours started early in the mornings. 😁
@@giovannisantoro8574 I wouldn't mind.
Yay, can't wait to see this now 🤗
Good job mate 👍
Fingers crossed I'll have time to do the last few jobs before the month is out.
"Hi boss, my car broke down, so I'll be running late"
How late?
"18 years"
Lovely stuff , nice job
Glorious sound!
Nice one mate, well done.
Thanks 👍
Great video 👍 nothing sounds better than a Busso V6
Couldn't agree more!
The Busso is possibly the nicest sounding engine ever. Followed by Volvo/Fiat 5 cylinders lol
it sure is.
Beautiful car and that V6 sound... 🙂
Couldn't agree more!
Great video thanks for sharing 👌🏼
Thanks for the visit
Closest sound and feel ur get to owning a Ferrari lovely sound 😎
yeah closest i'll ever get
Top car, top man!
Thanks a lot!
Lovely sound
@Italia Autos Watch out! It's got a fuel leak from rail2!!! It would be a shame to burn it down. At 7:40
Its smoke. Surprisingly no leaks from that rail. Just the air leak from egr as I didn't tighten up the bolts.
@@ItaliaAutos Watch carefully at 7:40 you touch the rubber part of the fuel hose going to the rail with your right hand and a bit of fuel squirts out as it moves. Maybe you should go back and double check just to be on the safe side.
@@nsz2302 oh yeah. i did that clip up after. but well spotted.
well spotted.
@@ItaliaAutos thnx. Btw still waiting for that 166 clip. :-P
Super nice video, Alfa 🚗❤️
Greetings Gert
Amazing job 🏴🤴🐍
Thanks 😊
That’s a bloody great noise isn’t it ...😍
very
Were those service invoices from Ryauto, Knowle? Used to work there in day!
Great engine!
Indeed!
Glad I'm not the only one plagued by that damn injector light! Just about to put a new cam shaft sensor in my Twinspark, what a lovely job! Lets hope this works.
at least this fault was sorted easily.
@@ItaliaAutos is it possible to replace the cam shaft sensor without removing the cam belt and all the other stuff on a 932 2.0 twinspark, as I've just been quoted £500 for it all to be changed
Good job! Engine sound is great. I have the same engine 156 2.5 V6 but the sound is not the same. Are the ehauxt system not connected? Thanks for sharing.
This has got a very loud exhaust. Thanks for watching
Hi , great video’s Posts! Ive a question ; What do i need to do for a Brembo brake conversion for a gtv 916? Can you please help me out?
I had one, exactly this model, V6 with Teledials. If anyone wants to know what the fuss is about Alfa, drive one of these. You'll understand
Yep. Totally agree.
Indeed, love my V6 in Coventry Green & tan interior, with gta teledials, q2/refreshed suspension with konis and eibachs, special thing!
7:39 fuel is leaking
yes it was just a clip i didnt clip in. sorted it shortly after.
Nice build. Love the exterior and sound! What’s the exhaust setup?
Thanks
Its a wizard exhaust
Italia Autos Cheers. Wizard Cat back and standard from manifolds to cat, or?
Nice to see it coming back from the other world ! I have a 156 V6 i'm working on, it has a very bad idling, lots of misfires but everything mecanical is good, sparks are good, new injectors, all sensors new, timing is good, heads redone, compression at 12-12.5 on every cylinder and no fault on ecu. Do you think the problem could be the ECU ?
Maybe coils?
Sounds great! wouldnt of thought it was ecu.
Good job
Thanks
RIPPER MATE!
By Jove and by Golly, that sounds almighty!!
sure is
Great work! Please get rid of that filler cap sticker 🤣
Thats bodywork. Not getting paid to take that off. But I'd do it for free. 00's tat.
Stock exhaust??
Far from it.
Reassuring you make mistakes like that with pipe as I do very similar things lol
oh yeah plenty of mistakes. lol
@@ItaliaAutos I think I had the same expression as you when I got my cheap Thesis running the other day , had been fighting it on and off for days. What keeps you going isn't it the satisfaction of a fix
What the heck is that exhaust?
wizard
Does it have equal length pipes and a Wizard system? I never knew a really early GTV had no DBW and also had EGR. My ex 95 164 Super had EGR but still had the old flap AFM. I guess when the 156 came they switched to DBW.
yes it does.
What is your opinion on a brera as a first car?
if your new to driving i would say no. alfa 147 prob best to start on.
Good sound! Thinking about selling my fiat barchetta and getting an Alfa or something. Any good cars for students but fun to drive? Thinking about a GTV or GT
I'm looking for a barchetta to feature on my channel if its cheap and for sale.
Any plans to do a brake bleed run through on a V6 gtv with the brembos about to do mine and any tips on bleeding them?
i do need to bleed them again still.
Just bleed them, nothing special
Nice! Did you find out why the red engine light came on?
sticking relay for the air flow meter.
10:32, hood open or front bumper is sitting too low? Gap between those is a bit too big.
It runs its not finished lol.
@@ItaliaAutos I see. It's just that I have same thing with my GTV and I'd like to see if you make a video how to adjust it. :)
@@Macela94 Me too, video if you can please Neil
Is it possible to swap a 2.0 engine for a V6...?
if you have the money.
Hey everyone who is loving this. I have one for sale. Best car I have ever had. Owned it for 13 years, lots spent. Recently listed on autotrader. due to coronavirus job loss. So sad to have to sell this beautiful machine.
Thanks for sharing!
Is that a wizard exhaust?
by the sound of it id say so.
@@ItaliaAutos That is definitely a Wizard catback, the most distinctive busso sound by far, completely different from anything else!!
Is this car for sale? If not how much did you sale it for?
its now a customers car.
Is this a seller or a keeper?
its a customers car.