Interesting that they said wheelspin kills diffs in no time, then proceeded to wheelspin at 100 MPH for hours in a single go before they had a real problem. I think the biggest takeaway here is that oil is important. I really like the 'till absolute destruction format of these videos.
normally your not trying to kill your diff so that is why it happens in no time for normal people when you try to make it happen it takes forever man🤣🤣🤣
@@polski_mamut yes once it stopped it cooled and harder essentially fusing them together. But when it was glowing red the metal was hot and soft it would continue until it goes out. But once its stopped its done
“well you see, that is what destroys the internals, things overheat, increases friction, and it chews itself to bits. why don’t we try imitating that scenario!”
First the spir gears and the shaft that they ride on heated up. This cause the shaft to expand and lock to the spir gears. Once the spir gears were locked to the shaft, they started spinning the shaft like a smooth version a router bit. The spinning shaft then started grinding away the steel from the diff case ( which is what caused all of that play ). You can see @11:28 that the tip of that spinning shaft gets so hot from friction that it glows bright orange.
In Russia, you don't service the car until something ejects... Then you just replace the parts that are essential for going forward... Everything is so cheap, because people wreck their cars so often that junk yards are full of usable spare parts.
Really cool guys. There's so much to be learned from your vids. Some folks see it as all laughs and silliness, but I leave each video having learned something usually.
9:57 Normally (when the right and left wheel spin at the same speed) those gears don't spin. They are just not designed to be used very much. Only when you go around a corner or so.
I feel like that clear case and the chill from the weather/snow has helped it extend its life compared to 32.2°C here in Central Wisconsin with 100% humidity I don't forsee it running as long as in this scenario. However this was a interesting demonstration.
Even a open diff can spin both tires for a short bit at least. Those spider gears put so much pressure on the side gears it’s easier to turn the axle than spin the spider gears. Usually only banging gears or a quick shock load. This can also cause catastrophic failure
I had a diff where that pin came loose ( bolt holding it broke) and it moved back and forth hitting the pinion gear and that caused the bolt holding it to loosen! Pin was bent so I couldn't remove to fix/rebuild. So I welded it in place and tightened everything fresh fluids and that was 4 months ago. No issues yet! Bought a new one (entire axel assembly) still haven't had to put it in!!
0:20 - I've always considered this fact (about the free-to-spin wheel doubling in speed) a _kind of_ traction control, in and of itself. We all know that doubling the speed via gearing will give us twice the speed, but at half the torque. So in essence, when a wheel begins to lose traction and spin faster than the other, its torque is reduced by 50% - Now it's less likely to spin...
No, the torque is equal at both wheels. If one wheel loses contact, then no torque will be delivered to the other. That's why braking the freely spinning wheel (eg. traction control) allows the contact wheel to generate torque.
Bought a '98 Toyota Hiace four years ago that seemed to have a minor oil leak from the diff. No drops on the ground, but could smell it after driving. Didn't care much about it until on a long summer holiday trip, after lots of rocking to get unstuck from a mud hole. Heard whining from the rear end when driving afterwards. Hit up the nearest Toyota workshop, they added 1.1 L of diff oil. (Total capacity is 1.8 L) Less whining on the trip home, but noticeable through tunnels. Had the diff checked at the local workshop after coming home; the pinion bearing was bad. A car-savvy friend of mine replaced the diff with a second-hand unit, and it's been fine since. However, after watching this video, I feel bad for torturing the old oil-starved diff when trying to get out of that mud hole. Gotta check the oil level soon :-)
Maniacs!😜 What "spider gears" don't like is shock loads. Wait until spring. Remove both shocks/dampers from the rear end. Then try to do burnouts on the dry pavement. You may even get a bonus, and break the U-joints on the driveshaft.
Sometimes it's people trying to race... Get the RPM high and then drop it in gear. Metal hates hard fast hits. The more you do it, the bigger the play becomes that leads to harder hits.
Just don't do diff oil changes is enough, condensation brings water mixed with steel shrapnel's and honey like dried up old oil will burn any gearbox fast
Years back I had a little Mazda pickup I had mismatched tires on. The rear end was making a little noise, but then got louder and made a hell of a bang with a constant clunking. It had broken off the cross pin bolt, the cross pin had tried to leave it's position, but had hit the pinion so hard it broke one if the carrier caps. It was a mess.
Seeing that makes me glad that I chose to leave the car I got until I actually looked it over properly. Welded the "blue" slipping gears to each other with electricity. Filled it back up using old engine oil mixed with 3 tubes of grease. Ford Independent Rear Suspension 8.8 differential, took 185hp for 360'000km... only one oil change. Works just fine, gets around better then some trucks do. I have tire chains for it, they are amazing. Works so good that thinking of getting a job to buy a new one off a dealership, forget that... to much work.
I was tight because the diff oil lubric’s the half shaft bearings if it not level the half shaft bearings will run dry and tighten up. Citroen have diff issues when oil level gets low in gearbox diff throws oil up in to gearbox staving itself of oil and it destroys itself on motorway, normally the roll pin lets go that holds diff together allowing it to grenade diff and gearbox normally destroying the clutch too.
It's probably too much to ask, but a little text box that converts metric units into the budweisers per bald eagle system showing up when any measurements are shown would be a great help for us across the waters. I have no idea how warm or cold centigrade measurements are.
I have a Land Cruiser 100 Series. Last year water leaked into my rear diff and it started to whine and vibrate, today 1 year after that it still hasn’t died. But it whines terribly of course.
I'm glad the Ladas are as disposible there in beaitiful/freezing Russia as aquiring a soda from a soda despener! Bless garage54d for disclosing this to us laymen! Much love/ respect Your friend/fan from Texas,USA!! 💙 🇷🇺🇺🇸
Guys, the job you do with translating is great - it's just that sometimes I think a translator with proper russian accent would make it even greater xD
We discussed the idea with the guys, they weren't very fond of it. And I see where they're coming from: my baseline accent is sort of average American, and my attempts to simulate a Russian accent very well might've come off as super cheesy and fake. I've heard a bunch of genuine Russian accents in my years living in Russia, they are super cool, they're not what Hollywood films make them out to be, and they're very tough to emulate.
From my experience with GM is bending the thrush washers around the spider gears and loading the diff which locks the spiders and hello posi! But eventually the cross pin holding the spider gears break and will blow everything apart sending debris though the cover and lose a axle in process. Which also fucks up the ring n pinion as well.
The Spider gears inside the housing are not meant to spin at that speed. They are only used for turning and going around corners. They don't spin at high speeds. To see how long a differential will last without oil, spin both wheels at the same time as if driving normal then you will see how long a differential will last without oil.
Doing a long 1 wheel burnout will do the same thing. It puts an incredible amount of stress on the spider gears and their shafts. Some diffs can take it for more than others, but it's harsh. Seen a few blow up like that, luckily not my cars!
Should bung up the air pressure blow hole on the axle... causes the half shafts to lose their seals and can blow them out the tubes. Used to do it to ppl we didn't like using some gun gum and a jubilee clip... few miles later kersproing
Parts detonation in an axle usually happens when both wheels are spinning and then one wheel stops suddenly and one keeps spinning and bang, done it a couple of times playing off-road either in the mud or snow ones in a Land-Rover once in a Willys CJ3.
4x4 jeep cherokee lasted years bearings go out first like 8 bearings, they brake after the lock up of the a xles and yokes bearings may still go on front wheels until wheel or axle bearing locks up but then they can brake n still go at a lower speed with alot of noise,
Hi, with those thermometers you need to put them really close to have proper readout, their measuring cone is very wide, that far from diff you measured average of diff and lot of environment temps.
Do another dry differential video, but load the drivetrain by doing it on a wheel dyno. I once had a Toyota Hilux that had leaked out all its diff fluid without me noticing. I was driving on the freeway when it gave out. No grinding or crunching or anything: it was like it just slipped into neutral. I thought that was odd, and when I took the pumpkin out, I discovered why there hadn't been any crunching. The ring and pinion had gotten so hot that the pinion just melted into a blob! The ring gear teeth had melted away to about half the size each tooth was supposed to be. And a ring of metal had built up around the housing from the molten gear-tooth metal being flung off. I bet it would have been reallllllly cool to see that happening! Molten metal flying around in the case at high speed, sparks, destruction! That's not to say these trucks have unreliable differentials though. Quite the opposite. That truck had 479,000 miles on it when that happened. The differential fluid had NEVER been checked. These trucks were so reliable, its easy to forget that they need any maintenance at all; they just keep going... until something like this happens!
And now you know when you're doing a 1 wheel peel that the tire is spinning about 2x what the speedometer is reading 😬 Reminded me of that vid on here with a red 3rd gen camaro and when the tire blew it took out the whole quarter and back glass.
I wonder if the diff would explode if you were to load the trunk with a lot of weight and get it up to top speed while the rear end was suspended in the air and than let it drop to dry ground
we have a 74 ford bronco at our shop, recently something shot out of the differential housing, me and my teacher feared that it was a gear tooth, turns out that someone didnt tighten down the bolts holding the ring gear in place, because when i pulled the differential out, 8 out of 10 bolts were sitting at the bottom of the housing, and one was shot out, gears were fine btw
When offroading, one of the wheels can lift up, resulting in twice the speed in the oposite one. When you give it gas to move forward, the wheel speeds up and when it hits the rock/hard surfice and stops immediately this is when damage happens. Really wanted to see how one of the wheels spins up like you did with lifting it, then start moving forward in first gear to about 10-20 km and drop the car to the ground on a hard surface, not snow. That would be really interesting to see.
Ya, most of that damage happens when someone is stubbornly pinning the gas and they are bouncing up and down on a rock, but not going anywhere. Often they are at full lock for good measure too. Poor cv never had a chance.
Should have jacked both rear wheels up and taken the brake off one so you can switch the stuck wheel , could even get another break setup to switch between them
ur diff pin got loose because normally that pin doesnt spin, it does a little bit when u go around turns n stuff but 99% of the time its stationary, the situation u created was very unique, because it was only that one wheel spinning the spider gears pin was also spinning steady eating away at the side it was turning against
Think that had a positraction clutch type so when you force one wheel to spin and not the other it sits there and smokes them clutches and gets hot I think it would be different if it was an open diff
Had a guy I worked with as a contractor for the Army. He forgot to refill the rear diff on a humvee during services. It lasted about 5 miles before locking up
5:43 “Multiply 160 x 2 and you’ve got the wheels spinning at the equivalent of..”
B L I N 😂
Ikr 😂😂
Blyatski
XDDDDD The way he says blin tho XDDDD
What an idiot ...fuck me glad he's russian I don't have to be embarrassed
@@muskokaroads2371 embarrassed for what?
This guys video are all answers to questions we have had but didn't have money or resources to find answers to
exactely!
Exactly, and using the "transparent plastic" is amazing. HE is the best
we don't have money to destroy $300 cars?
@@kevinragsdale6256 but do you have the time and resources to do it each week
@@kevinragsdale6256 in my area a car that costs 300 dollars has already been destroyed.
music choice at the "burnout" was fricken gold >D
"It's making all these terrible noises" cue techno music.
Go to war - No sons of mine..... Just in case anyone wondering.
5pp+++
@@TheAzego thanks dude, now I can experience my burnout in tge same style!
I wasn't expecting it when it caught me by surprise and I had a good LOL. These POS Lada cars are funny to begin with.
I wish Garage 54 crew tested what would break first if fuel was the only liquid in a car
😂
🔥💥
Engine for sure
@@georgobergfell brakes is my guess
I'd like to see gasoline as coolant.
"The axis, these are properly thrashed." Sums up WW2.
Underated comment
ahahahaha
Ahahahahahah
Hahahahahahahahhahahahahhahahahahha
Ikr😂😂😂
Interesting that they said wheelspin kills diffs in no time, then proceeded to wheelspin at 100 MPH for hours in a single go before they had a real problem. I think the biggest takeaway here is that oil is important. I really like the 'till absolute destruction format of these videos.
They just love to prove themselves (and other people) wrong... Some cars have by definition better quality parts that last longer even if tortured.
How much do charge me
That's true, but it did cause a significant amount of damage... That diff was trashed even with the oil, it was so worn out.
normally your not trying to kill your diff so that is why it happens in no time for normal people when you try to make it happen it takes forever man🤣🤣🤣
@@TheAwkwardBanana Yes, but it was trashed after spinning in fourth gear for hours. You're not gonna do that in regular use.
wow, that glow of the diff!! should have kept on going until it goes whammy!!
It blocked, so I don't think there was a chance to have diff pieces all around
@@polski_mamut yes once it stopped it cooled and harder essentially fusing them together. But when it was glowing red the metal was hot and soft it would continue until it goes out. But once its stopped its done
“well you see, that is what destroys the internals, things overheat, increases friction, and it chews itself to bits. why don’t we try imitating that scenario!”
meh he took it the fast way even with oil it still would have died it would have taken a couple more hours atleast though
06:30 Love the music transition! 🤘
Name dong?
Song
Yet again another interesting thing to watch
But it's more interesting to see your profile picture 😂
@@Jackson-mm8ep 😂😂😂😂
BMI Russian doing the real work here
People like them are like the heroes irl without cape
That's the most Russian way to weld a diff I've ever seen.
if it works right?
Gotta say, garage54 never lets you down, axel's might but not the boys👍🏴
Torsion bars on 80s/90s Peugeots come to mind
@@iainmacrae6982 instant lowered suspension weither you wanted it or not lol
"and the other spins at twice the speed"
Now I'm just imagining a Corvette with open diff spinning one wheel at twice it's top speed of ~190mph.
KABOOM!!
Put it this way. Now you have a welded diff 😂
yeah he's got a locking diff now that's so awesome🤣
I love how your thumbnail is actually always a part of the video👍
Respect that man
Almost, the guys sometimes use something unrelated (though whatever is in the video is always more epic).
First the spir gears and the shaft that they ride on heated up. This cause the shaft to expand and lock to the spir gears.
Once the spir gears were locked to the shaft, they started spinning the shaft like a smooth version a router bit.
The spinning shaft then started grinding away the steel from the diff case ( which is what caused all of that play ).
You can see @11:28 that the tip of that spinning shaft gets so hot from friction that it glows bright orange.
Given how quickly these cars disintegrate on the Russian dash cam videos, I’m genuinely surprised at the strength of that differential.
In Russia, you don't service the car until something ejects... Then you just replace the parts that are essential for going forward... Everything is so cheap, because people wreck their cars so often that junk yards are full of usable spare parts.
@@Monni95 We would have the same thing here if it weren't for the accursed cash for clunkers program.
Lada, built around the rear end.
I got a Russian mcdonald's breakfast ad even though this is the english channel. I'll never get the jingle out of my head😂
Got a Russian bride
Really cool guys. There's so much to be learned from your vids. Some folks see it as all laughs and silliness, but I leave each video having learned something usually.
what will he come up with next sulfuric acid in the diff?🤣😂🤣
9:57 Normally (when the right and left wheel spin at the same speed) those gears don't spin. They are just not designed to be used very much. Only when you go around a corner or so.
it ain't breaking cause it's to damned reliable I love it🤣
"Meanwhile, at Lada's super secret 'Destructive Test Lab'....."
Wow this guy can speak english and russian at the same time now that is talent I dont know why he is a mechanic.
I feel like that clear case and the chill from the weather/snow has helped it extend its life compared to 32.2°C here in Central Wisconsin with 100% humidity I don't forsee it running as long as in this scenario. However this was a interesting demonstration.
3:27 right wheel stops spinning in reverse and he knees behind the car. Safety first😂 The Russian style
Gotta thank Russians for all those LiveLeak videos tbh
Just love these guy. Not afraid of doing dangerous stunts no matter they are
They're living the beater car lifestyle
Even a open diff can spin both tires for a short bit at least. Those spider gears put so much pressure on the side gears it’s easier to turn the axle than spin the spider gears. Usually only banging gears or a quick shock load. This can also cause catastrophic failure
I had a diff where that pin came loose ( bolt holding it broke) and it moved back and forth hitting the pinion gear and that caused the bolt holding it to loosen! Pin was bent so I couldn't remove to fix/rebuild. So I welded it in place and tightened everything fresh fluids and that was 4 months ago. No issues yet! Bought a new one (entire axel assembly) still haven't had to put it in!!
0:20 - I've always considered this fact (about the free-to-spin wheel doubling in speed) a _kind of_ traction control, in and of itself.
We all know that doubling the speed via gearing will give us twice the speed, but at half the torque.
So in essence, when a wheel begins to lose traction and spin faster than the other, its torque is reduced by 50% - Now it's less likely to spin...
No, the torque is equal at both wheels. If one wheel loses contact, then no torque will be delivered to the other.
That's why braking the freely spinning wheel (eg. traction control) allows the contact wheel to generate torque.
5:45
Wheel spinning at the equivalent of...
*Blin*
I love this sedan has a solid rear axle and leaf springs
Bought a '98 Toyota Hiace four years ago that seemed to have a minor oil leak from the diff. No drops on the ground, but could smell it after driving. Didn't care much about it until on a long summer holiday trip, after lots of rocking to get unstuck from a mud hole. Heard whining from the rear end when driving afterwards. Hit up the nearest Toyota workshop, they added 1.1 L of diff oil. (Total capacity is 1.8 L) Less whining on the trip home, but noticeable through tunnels. Had the diff checked at the local workshop after coming home; the pinion bearing was bad. A car-savvy friend of mine replaced the diff with a second-hand unit, and it's been fine since.
However, after watching this video, I feel bad for torturing the old oil-starved diff when trying to get out of that mud hole. Gotta check the oil level soon :-)
Man i want a series with water contaminated oil
I've seen two diffs breaking when grip is equal, grip is great and clutch is dumped. Breaks the pinion gears into two pieces.
Maniacs!😜
What "spider gears" don't like is shock loads.
Wait until spring. Remove both shocks/dampers from the rear end.
Then try to do burnouts on the dry pavement.
You may even get a bonus, and break the U-joints on the driveshaft.
Cool vid as usuall! Try this in the summer heat, i bet you get different results(better results)
I’ve been watching y’all Channel for about 2 years now it’s crazy how reliable those ladas are
You deserve more subscribers and views !
Brilliant vid! I'd recommend this as an educational study to any first car owners on diff maintenance if applicable.
Sometimes it's people trying to race... Get the RPM high and then drop it in gear. Metal hates hard fast hits. The more you do it, the bigger the play becomes that leads to harder hits.
Just don't do diff oil changes is enough, condensation brings water mixed with steel shrapnel's and honey like dried up old oil will burn any gearbox fast
Kitécat TestEcke the magnet picks up the metal
Years back I had a little Mazda pickup I had mismatched tires on. The rear end was making a little noise, but then got louder and made a hell of a bang with a constant clunking. It had broken off the cross pin bolt, the cross pin had tried to leave it's position, but had hit the pinion so hard it broke one if the carrier caps. It was a mess.
Seeing that makes me glad that I chose to leave the car I got until I actually looked it over properly.
Welded the "blue" slipping gears to each other with electricity.
Filled it back up using old engine oil mixed with 3 tubes of grease.
Ford Independent Rear Suspension 8.8 differential, took 185hp for 360'000km... only one oil change.
Works just fine, gets around better then some trucks do.
I have tire chains for it, they are amazing.
Works so good that thinking of getting a job to buy a new one off a dealership, forget that... to much work.
Banks power has entered the chat.
The fact that it held up so long is amazing!
They didn't flush all the oil away... There was still thin film of oil even after most of the oil did burn away due to excess heat.
I was tight because the diff oil lubric’s the half shaft bearings if it not level the half shaft bearings will run dry and tighten up. Citroen have diff issues when oil level gets low in gearbox diff throws oil up in to gearbox staving itself of oil and it destroys itself on motorway, normally the roll pin lets go that holds diff together allowing it to grenade diff and gearbox normally destroying the clutch too.
It's probably too much to ask, but a little text box that converts metric units into the budweisers per bald eagle system showing up when any measurements are shown would be a great help for us across the waters. I have no idea how warm or cold centigrade measurements are.
I have a Land Cruiser 100 Series.
Last year water leaked into my rear diff and it started to whine and vibrate, today 1 year after that it still hasn’t died.
But it whines terribly of course.
Damn you see that thing glowing at 11:24 🔥
Nice work guys ty for your patience to see it Thru and make it break.... I enjoy these videos
I died when the rock music came on at 6:31 😂😂
Don't you love this guy, totally out there.
Great video guys! I've blown up two ford 9" diffs. Split the casing in half on one of them. I definitely didnt mean to brake them but I did lol.
YOU MUST BE SPECIAL ED!!!!!!
Damn skippy!
Was in an 84 bronco 351 v8 with a bit of work done to the engine. Lol
LOL, I PRAISE YOU for TAKING THAT WELL AND REALIZING JUST BEING MESSED WITH.... MOST PEOPLE JUST GET BUTT HURT AND THAT MAKES ME LAUGH EVEN HARDER
Amazing, watching the oil get blacker and blacker
This channel is proving that Ladas are indestructible
It's almost like they've watched the Banks Diff videos
Russian Craftsmanship: The Self Welding limited Slip Differential.
I'm glad the Ladas are as disposible there in beaitiful/freezing Russia as aquiring a soda from a soda despener! Bless garage54d for disclosing this to us laymen! Much love/ respect
Your friend/fan from Texas,USA!! 💙
🇷🇺🇺🇸
Guys, the job you do with translating is great - it's just that sometimes I think a translator with proper russian accent would make it even greater xD
We discussed the idea with the guys, they weren't very fond of it. And I see where they're coming from: my baseline accent is sort of average American, and my attempts to simulate a Russian accent very well might've come off as super cheesy and fake. I've heard a bunch of genuine Russian accents in my years living in Russia, they are super cool, they're not what Hollywood films make them out to be, and they're very tough to emulate.
this youtube channel is great solving all my suspicions. Thank you So much.
From my experience with GM is bending the thrush washers around the spider gears and loading the diff which locks the spiders and hello posi! But eventually the cross pin holding the spider gears break and will blow everything apart sending debris though the cover and lose a axle in process. Which also fucks up the ring n pinion as well.
The Spider gears inside the housing are not meant to spin at that speed. They are only used for turning and going around corners. They don't spin at high speeds. To see how long a differential will last without oil, spin both wheels at the same time as if driving normal then you will see how long a differential will last without oil.
Interesting how it failed!!!! This is great information!!!! Thank You!!!!
Doing a long 1 wheel burnout will do the same thing. It puts an incredible amount of stress on the spider gears and their shafts. Some diffs can take it for more than others, but it's harsh. Seen a few blow up like that, luckily not my cars!
engines fine but the dif is done🤣🤣🤣
That’s a Lada rear end!!!
... I’ll see my self out
-It's actually a Volga (GAZ)-
@@televisionandcheese which one?
@@onionman500_m8 it's a GAZ 31029 Volga
Should bung up the air pressure blow hole on the axle... causes the half shafts to lose their seals and can blow them out the tubes. Used to do it to ppl we didn't like using some gun gum and a jubilee clip... few miles later kersproing
Cool video, shout out to the translator.
Would definitely watch some more
Greta ‘s favorite channel!!
How DARE you!
You think she's got a crush on Vlad?
Greta's favorite channel is zip ties and bias plies lol
@@sheridanbaldwin8629 Whistlindiesel and Neutral Drop also.
Parts detonation in an axle usually happens when both wheels are spinning and then one wheel stops suddenly and one keeps spinning and bang, done it a couple of times playing off-road either in the mud or snow ones in a Land-Rover once in a Willys CJ3.
That's why Dodge demons diffs go boom. People that don't know how to do proper burnouts 😂🤑
4x4 jeep cherokee lasted years bearings go out first like 8 bearings, they brake after the lock up of the a
xles and yokes bearings may still go on front wheels until wheel or axle bearing locks up but then they can brake n still go at a lower speed with alot of noise,
Hi, with those thermometers you need to put them really close to have proper readout, their measuring cone is very wide, that far from diff you measured average of diff and lot of environment temps.
Awesome experiment! Great job on doing what a lot of people done unexpectedly!
be cool to see if sulfuric acid helps break it faster🤣🤣🤣
Do another dry differential video, but load the drivetrain by doing it on a wheel dyno. I once had a Toyota Hilux that had leaked out all its diff fluid without me noticing. I was driving on the freeway when it gave out. No grinding or crunching or anything: it was like it just slipped into neutral. I thought that was odd, and when I took the pumpkin out, I discovered why there hadn't been any crunching. The ring and pinion had gotten so hot that the pinion just melted into a blob! The ring gear teeth had melted away to about half the size each tooth was supposed to be. And a ring of metal had built up around the housing from the molten gear-tooth metal being flung off. I bet it would have been reallllllly cool to see that happening! Molten metal flying around in the case at high speed, sparks, destruction!
That's not to say these trucks have unreliable differentials though. Quite the opposite. That truck had 479,000 miles on it when that happened. The differential fluid had NEVER been checked. These trucks were so reliable, its easy to forget that they need any maintenance at all; they just keep going... until something like this happens!
It needs a Banks Diff cover!!!!!!
And now you know when you're doing a 1 wheel peel that the tire is spinning about 2x what the speedometer is reading 😬
Reminded me of that vid on here with a red 3rd gen camaro and when the tire blew it took out the whole quarter and back glass.
it's not braking cause it's to damned reliable I love it🤣🤣🤣
Great golden choice of music for the burnout 😂
I’m impressed by the durability of that differential
they disintegrate in no time
he's like it's not going as fast as I'd like it to🤣🤣🤣
To always have a dozen or so old Ladas around to tear up, priceless.
That shit box seems to be more reliable than a brand new Chevy
@18:33 Make speed in reverse on asphalt. While rolling put it in first, redline the engine and dump the clutch! Something will give...
I wonder if the diff would explode if you were to load the trunk with a lot of weight and get it up to top speed while the rear end was suspended in the air and than let it drop to dry ground
two hours later and she's still going like a beast
and then she finally brakes down🤣🤣🤣
Man i need to get me on of these Lada cars.. Pretty tough
Was hoping for a nice explosion but I kind of predicted the welded differential outcome lol
This channel should be so much bigger
"Aaaaaand we've got welded diff..." 🤣🤣
Another great video ! 👍🏻
"We've got a Lada snow.." 🤣
we have a 74 ford bronco at our shop, recently something shot out of the differential housing, me and my teacher feared that it was a gear tooth, turns out that someone didnt tighten down the bolts holding the ring gear in place, because when i pulled the differential out, 8 out of 10 bolts were sitting at the bottom of the housing, and one was shot out, gears were fine btw
First time I've seen glowing differential gears.
I'm glad I changed my rear diff fluid when I did it was making a noise when I turn after it got warmed up runs fine no noise now
When offroading, one of the wheels can lift up, resulting in twice the speed in the oposite one. When you give it gas to move forward, the wheel speeds up and when it hits the rock/hard surfice and stops immediately this is when damage happens.
Really wanted to see how one of the wheels spins up like you did with lifting it, then start moving forward in first gear to about 10-20 km and drop the car to the ground on a hard surface, not snow.
That would be really interesting to see.
Ya, most of that damage happens when someone is stubbornly pinning the gas and they are bouncing up and down on a rock, but not going anywhere. Often they are at full lock for good measure too. Poor cv never had a chance.
Should have jacked both rear wheels up and taken the brake off one so you can switch the stuck wheel , could even get another break setup to switch between them
One big thing that snaps axles is getting wheels spinning and then getting traction. With all that inertia it will snap axle shafts instantly
Love you guys burning engine to gearbox and now difs
I like this channel no nasty cheap SFX or gimmicks.
ur diff pin got loose because normally that pin doesnt spin, it does a little bit when u go around turns n stuff but 99% of the time its stationary, the situation u created was very unique, because it was only that one wheel spinning the spider gears pin was also spinning steady eating away at the side it was turning against
It's amazing how long they will last with no oil... It's also equally amazing how fast they come to a stop when they are toast.
Think that had a positraction clutch type so when you force one wheel to spin and not the other it sits there and smokes them clutches and gets hot I think it would be different if it was an open diff
Had a guy I worked with as a contractor for the Army. He forgot to refill the rear diff on a humvee during services. It lasted about 5 miles before locking up
Missed opportunity at 9:40 to say, "Now that's a lot of damage." but I don't figure Vlad is familiar with Flexseal.
I think they used it in an episode.
I would love to see what you guys would do with one of those motorized bike kits you can buy off the internet
maybe build a motorized bike?
(just fukkin with ya😁)
@@level19barb16 or try to put it in the see-through car or stick it on a cool Russian bike