Please, please, PLEASE remember to backup your standard ECU map before you load any map. If a map doesn't work for you and you have not backed up your map, you are in a bit of a helpless situation.
Galetto 1260 is a cable that connects to your obd2 port, but it also comes with software, once install on laptop, you can then upload the maps all u need is Galetto, the Galetto software and maps, simples
@aberboy007 Yeah I know the flash maps are pretty common. I was wondering if it was possible to DIY tweak my maps, as a bit of a hobby. I'm not expecting to get power increases due to the risk involved, but I'd love to understand what was going on in there. What software is used? For example on VWs?
@v11o they can be edited if you know what your doing and have the right software although, they dont need to be edited as they basic maps that most tuners use, what we call flash and dash,in otherwords, flash on map and drive off
Andy.... I put the red dot VXR on to my z20leh, and it has huge turbo chatter.... It idles nice and drives nice off boost. But boost and cooling are iffy. Any other maps with vxr injectors and afm mapped in??? Or do you know how i can lower boost on my current map by editing it? Thanks
yeah as i explained to other guy, my mate did it with standard unit, but i wouldnt advise it, the red dot with vxr afm/injectors is pretty much same map, but with vxr injectors/afm mapped in. although mate was running around 290bhp with it. mate of mine tried to lower the boost on the ph3, i have used it, but its mixed feedback, ppl saying doesnt feel much different, to felt down on power, yes there is a way, but u need a certain pro software,cant remember name off hand tbh
im using the kwp2000 and got it to read by turning the engine over, then it would read, but iv tryed everything to get it to write, you know of any reason why it wont write??? any info will be appreciated. cheers dan.
@v11o yes if you have the software, as i had one of the maps i have tweaked to lower boost as 20psi was a bit high,and a m8 of mine has played around with them to acept different mods, so if you have knowledge, then yes for sure
zlet map is a bog standard zlet map. im not mapper or tech person, the maps were given to me, which i tested on my coupe to check all was fine with them, i just named them what they were, as in ph3,ph2 etc red dot are what they are, ph3 ish maps reddot.bin is 280bhp 320ft.lbs approx the vxr one is slightly higher because it needs vxr afm n injectors thats around 295bhp. and thats about all i can say tbh, we all should know what mods are needed for each phase,
without vxr turbo then would have to be ph1, wouldnt advise any higher, although mate of mine ran red dot on a standard turbo, but maybe he was lucky, i wouldnt advise it tbh
Please, please, PLEASE remember to backup your standard ECU map before you load any map.
If a map doesn't work for you and you have not backed up your map, you are in a bit of a helpless situation.
u can run a standard turbo on any phase, but wether is survives is another matter
Galetto 1260 is a cable that connects to your obd2 port, but it also comes with software, once install on laptop, you can then upload the maps
all u need is Galetto, the Galetto software and maps, simples
@aberboy007 Yeah I know the flash maps are pretty common. I was wondering if it was possible to DIY tweak my maps, as a bit of a hobby. I'm not expecting to get power increases due to the risk involved, but I'd love to understand what was going on in there. What software is used? For example on VWs?
Good video.
Quick question, is there a way you can save the standard map before uploading the new one? Just in case you want to go back to standard.
@v11o
they can be edited if you know what your doing and have the right software although, they dont need to be edited as they basic maps that most tuners use, what we call flash and dash,in otherwords, flash on map and drive off
Andy.... I put the red dot VXR on to my z20leh, and it has huge turbo chatter.... It idles nice and drives nice off boost. But boost and cooling are iffy. Any other maps with vxr injectors and afm mapped in??? Or do you know how i can lower boost on my current map by editing it? Thanks
yeah as i explained to other guy, my mate did it with standard unit, but i wouldnt advise it, the red dot with vxr afm/injectors is pretty much same map, but with vxr injectors/afm mapped in. although mate was running around 290bhp with it. mate of mine tried to lower the boost on the ph3, i have used it, but its mixed feedback, ppl saying doesnt feel much different, to felt down on power, yes there is a way, but u need a certain pro software,cant remember name off hand tbh
all you need is a laptop pref running xp as easier, but vista and win 7 work sometimes and a galletto 1260. and thats it, oh and plus the maps
what hardware do you need for the red dot map?
this guy is a gem!!!!
im using the kwp2000 and got it to read by turning the engine over, then it would read, but iv tryed everything to get it to write, you know of any reason why it wont write??? any info will be appreciated. cheers dan.
red dot is ph3 sportscat,precat fmic and vxr turbo needed 280bhp approx
red dot vxr is same as above but vxr injectors/afm mapped in bhp 290 approx
@v11o
yes if you have the software, as i had one of the maps i have tweaked to lower boost as 20psi was a bit high,and a m8 of mine has played around with them to acept different mods, so if you have knowledge, then yes for sure
Hi,Can you still do the free zlet maps pleaseeee?
do u need a cable and what sort ?
any info on the redot maps? cheers
@KobraBeatz
of coarse, just select read, and that will save the map on the car
zlet map is a bog standard zlet map. im not mapper or tech person, the maps were given to me, which i tested on my coupe to check all was fine with them, i just named them what they were, as in ph3,ph2 etc red dot are what they are, ph3 ish maps reddot.bin is 280bhp 320ft.lbs approx the vxr one is slightly higher because it needs vxr afm n injectors thats around 295bhp. and thats about all i can say tbh, we all should know what mods are needed for each phase,
Do these work with kwp2000
Ray Taylor yes mate
without vxr turbo then would have to be ph1, wouldnt advise any higher, although mate of mine ran red dot on a standard turbo, but maybe he was lucky, i wouldnt advise it tbh
How do you actually edit the maps in the first place?
Links for download ?
Nice Video Andy :)
@XpLoDiuN
i tried to keep it simple, cant wait to get a decent vid cam and do a proper job. shud help sum ppl who dun realise how easy it is,lol
I've used windows 7 and it has been ok..
no link m8, just send me your email addy and will send them over
link is in description m8
click the link in description m8 and download them from there
just send me ya email addy, and will send them