Nice vid - Using a 2S5P battery would reduce the current and losses. You can have over 3A on the battery wires with typical 12W output. Also adding an extra capactior on the output may be needed to smooth out the voltage - you need a scope to see the ripple but some of these are noisy
Thank you. the board supports charging and discharging at the same time, by seeing the LED indicator (RED light - charging )(GREEN light - battery mode)(NO light - bypass mode)(blinking GREEN light - standby mode ).
Nice vid - Using a 2S5P battery would reduce the current and losses. You can have over 3A on the battery wires with typical 12W output. Also adding an extra capactior on the output may be needed to smooth out the voltage - you need a scope to see the ripple but some of these are noisy
Wow very useful😊..lalo na sa probinsya na tulad ng pinuntahan nmin 11pm pinapatay na ang kuryente
အားသွင်းရင် ဘယ်လိုချာဂျာမျိုးနဲ့တွဲသုံးတော့မှရမှာလဲခင်ဗျ
Pwedeng 32650 gamitin?
hi i wanted to ask, is the ups module not equipped with bms module? so you added bms 1s instead?
Hello, the module has a by pass mode if the battery is full. but to make sure I install a bms to protect the battery thank you
Can it work if i directed it to a 2 1.5watts 6v panel?
It's so Good but it's useless there's no charging port to charge the power bank
Thank you. the board supports charging and discharging at the same time, by seeing the LED indicator (RED light - charging )(GREEN light - battery mode)(NO light - bypass mode)(blinking GREEN light - standby mode ).