Tango 2 ExpressLRS Setup/ How-to
Вставка
- Опубліковано 3 жов 2024
- #teamblacksheep #tbstango2 #expresslrs
Don't forget to check out my ELRS bind phrase video how-t here: • How to: ExpressLRS wit... .
Check out my ELRS Mobula6 review here: • 2.4 ExpressLRS Edition...
![☀ Новая аппаратура от ТБС. Новый хит? [TBS Mambo]](http://i.ytimg.com/vi/Hm68fIsEdJA/mqdefault.jpg)
Thanks Jeff!
Anytime!
Thank you for this 👍
Anytime!
Can you really fell the low latency ?
Definitely. It’s noticeable even coming from CRSF on 150hz. Vs 50hz, it’s night and day.
does your radio keep an orange light on when you bind it to your ELRS quad?
I believe it did. I don’t still own a Tango 2 to say for certain. I always verify that I see the signal bars on the main Freedom tx screen when it’s bound.
I’m planning to get the older batch of HM Nano 2.4 for my tango2, have heard telemetry warning issue due to hardware. But this is the only model available in my country as of now should I go ahead and ignore the telemetry issue and jump in or hold up and get a better newer model for the tango 2 i already have the Betafpv lite radio 2 with elrs and like the low latency put poor gimbals makes me want to get a module for the tango. My primary use will be for indoor whoops and cheap experimental builds. My better quads will still run crossfire.
Thanks
The original “Ironman” lite module didn’t have issues with Telemetry. The only one with that issue is the first batch of the Slim Pro. Retailers should be carrying the version with the telemetry issue fixed now. If you do get the older version with issues, HM will repair it for you if you send it back to them. You can also opt for them to send you a repair kit if you are comfortable with soldering it. I returned mine with issues to my local dealer. I picked up a fixed version later.
@@TitanFPV ahh I see. Appreciate the prompt reply. Around where I’m from albeit next door to China things aren’t as simple to send across and receive per say.
Returns recalls that kinda stuff has sometime to go here in India.
Jumper recently released a 500mW lite module with their T Pro radio. You can also purchase it separately. www.arrishobby.com/products/jumper-aion-elrs-24g-nano-tx-module I haven’t had any experience with it personally, but it looks nice with an led screen. I don’t recommend the BetaFPV lite module(I had issues flashing it.)
Just installed the module bay on my tango 2 and tracer... It's pretty good, but I also just bought the betaflight ELRS lite TX just because I wanna test ELRS... Thx for this video
Anytime!
Will it be easy to switch back and forth between crossfire and elrs?
Very. Just switch from your CRSF model to your ELRS.
Great video. I have an issue when I got to run the elrs Lua it gives me a syntax error. I've deleted and reinstalled to no avail. Any advice would be greatly appreciated
Thanks! Did you download the lua from the ELRS Configurator? V1 and v2 luas are not cross compatible.
@TitanFPV I did dl it "elrsv2.lua" from configurator. I still get the error. I also flashed my module to 2.3 with success. I'm new to fpv and all this technical stuff. Please forgive my ignorance on this matter
@TitanFPV just started over from scratch looks like I got it going. Now time to see up the whoop with bind phrase. Thank you for your time. Subbed!
Awesome!
Can you run 1W on that slim pro with tango 2?
With external power, yes. Max on the internal Tango 2 battery is limited to 250mW though.
@@TitanFPV thank you
Anytime!
Hi… after putting the Mobula in binding mode , it starts flashing… then what? Unplug it and plug it back? I mean I followed your tutorial but after setting both the quad and the tango in binding , nothing happens… it doesn’t bind
What firmware is your ELRS module on?
@@TitanFPV V2.0 ... I just got it yesterday... it came with it pre-installed
@@TitanFPV also when trying to flash it ... in the build phase it shows and error when trying to find Patromio or something like that...
What version of Betaflight is the Mobula on? The SPI rx’s firmware version is included with the Betaflight firmware.
@@TitanFPV betaflight 4.03 it says and in betaflight the moment I connect , it shows me an error saying that there might be errors because of the betaflight firmware being old for the 4.03 version ... currently the beta flight App I'm using is the 10.7.2 / by the way ... Im using a MAC
how do i put the lua script on my tango 2 i have the same set up as you i just dont see my elrs lua script in my tango 2
Connect your Tango 2, and mount your sd card storage. Then just drag your lua script to the Scripts/ Tools folder on your sd card.
@@TitanFPV thank you
Anytime!
Hi,
Do you have that rgb led working on that ELRS module?
I’m on 1.0.2, and yes it works. The red is faint under my lights