Відео

what mic ur using with goggles?

I just jumped my car with an 1100mAh 130c 6s. Your solution left the lipo hooked up too long. The 6s battery was trying to charge the vehicle battery the whole time you had it plugged in. I pulled wires back to the driver's seat, hooked the lipo up, and started the car. It only took a couple of seconds. Took the pack from 25v to 24.8v, nothing hot, no puffing. Not ideal, but it got me home.

What's your opinion on if you can upgrade the gimbals to new aluminium version?

Is it ok for pinchers? Or hybrid pinchers grip? Thanks

I was looking at the case for the TX16 + Pocket, wonder if the Pocket could fit in the top?

Wouldn’t have puffed it will pulled it right off those create power in a burst so the burst was prolonging causing it to probably smoke the bms but no telling lol I need to get our rv started lol I have a few 52v batts I wonder if they will work

thanks bro super amazing.. i'm waiting for my hdzero goggles to arrive in 2 weeks..

Could this radio connect to your phone if you dont have a computer

Those are some hated compound tires, the soft ones jump out at every opportunity.

Going to try this at my quest 3. So my sons can watch me fly in first person view.

Thank you so much ! Could not update mine via USB because I had a port access error, now with your method it worked !

👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌👌👌👌

4s 5Ah 70c, should be good for a few seconds.

Confirmed the built in ELRS rx is spi, not UART based.

Nice video!

Great video. Thank you for the building tutorial.

I bought the BNF 65mm Race HD but will defiantly be building a 75mm utilizing the AIO5 🤘🤘🤘 Good video!!!

nice build. I bought some Coddar 380mah 1s batts that work too. Getting 2.5 - 3 min of flight time

just the information i needed to update my Jumper T15. thanks

Stick a couple gates in both directions ontop of the swingset.. 😜

EdgeTX 2.10 is the first officially supported firmware version.

Worked as advertised. Thanks for this video.

I need to change to mode 1 desperately

I just got my Mob6 Race HD yesterday... I have put around 9 or 10 packs thru it and man it is a Game Changer!!! I have been flying 65 and 75 mm whoops that I built using whoop-lite's and the weight savings with this new AIO5 makes all the difference!!! I will continue to fly a whoop-lite on my 75mm builds until I see how durable the AIO5 is but the added weight isn't as much of an issue on the 75mm and larger platforms. Can't wait to see your final build and flight videos!!! 🤘🤘🤘

If you're going to try this, use a 3S and let it charge the car's battery for a few minutes before cranking the starter.

i need help i have an old flysky tinywhoop which stopped binding after this it has a flysky reciever and after the update there is only one flysky protocol left

Thank you so much!

When I do this I get the red/green solid lights, hit bind on the transmitter, unplug/replug the quad but then just have a flashing red light on the XM+...what am I doing wrong?

THANK YOU from the bottom of my heart this was so helpful!

Make video of connecting HDzero VTX to FC

Can you run Liftoff with a real contrroller?

How do you know which LUA file to use with the Tx?

under rated video. Most pilots should learn this process

The video looks more clear

Nice review. I'm trying to figure out if I want the Tinyhawk 3 or the Easy Pilot Pro. being a beginner, I'd be flying 70% indoors. I think the slightly smaller Tinyhawk 3 would be better indoors? but the reviews for the Easy Pilot Pro say it has very easy starter setting (holds altitude). so I'm so confused as to which one to get.

thanks for you video! could you say me if the aio has a barometer on it

what is the point of that ring if you dont use it to clamp the rubber between it and the wheel ? this does not make any sense

any reason not to just put in all the screws other than the ones on the back?

Just go HD guys.i hate seeing all that flickering seen on screen

Weller w1010 and hakko 888 are both good priced stations

Nice you got the 66 core (3.3%) with that stuff unless repairing old corroded stuff or desoldering you dont need the extra flux. Or if doing SMD you may need it but you'd be surprised that you dont really need it.

Iv not got the problem but im updating elrs so Just incase ill save this. Sods Law says it will happen to me

Technically it's a full RemoteID implementation. Put a GPS on it, configure it properly and it's the same as all other modules out there.

hi can i charge the external battery directly from the zorro? (connecting it to a type c cable like you regularly charge it but with the external battery connected as well)

Thank you very much for this video. battery installed successfully.

5:11 when actual content starts.

Save yourself time hardware baudrate 115000 done it worked for me

Can you change the module SSID and pass?

My wife LOVED the idea 😆 gave her a reason to run to her favorite store. Thanks man! I’m stoked to finally tiny whoop

Awesome! Thank you so much! Subscribed and applied notifications 🔔 !!