i love outdoor videos that didnt have any music whatso ever, as natural outdoor sound are good enough & giving real vibe. if i wanna listen any music, i choose it myself~
I dregged for 40 years and I know that all the large stones that build up in the dredge cause you to loose gold. You need a partner to constantly clear the large rocks from the dredge sluice. The fine gold gets washed away with too many large rocks in that sluice. Also you need to clear those flat slate type rocks from the water relief flanges on the end of your suction nozzle. They limit your flow and can cause rocks to get stuck in your nozzle.
@@fishingvr4520 If a filter or grate extends far enough from the opening the delta-p will be low enough that it can't pick up those rocks in the first place.
Hello. I personally like the project very much. The only thing that in my case would put a cross of thick sheet metal like the tube at the tip of the aspirated tube, which had a point facing outwards about 3 cmm. So that the big stones that enter DO NOT DAMAGE THE MACHINE. only that. but the system is very good. regards
Nice man, Don't listen to those guys who take 20 minutes to do a single pan of dirt, You aren't even panning as aggressively as you could without losing any gold. And I don't care about their opinions either. The only time you have to go slower is when your entire pan is black sand cons, That makes it slightly more difficult.
Thank you my brother, who always provides the best videos, entertaining and inspiring, success always for the channel to continue working, complete black coffee is brewed ☕, welcome to Indonesian gold mining,, greetings from discovery gold999⚒️👍🤝🌺💮🌼🇮🇩
@KYLE fab a 3 prong crow foot of put over the end of your dredge it would help you alot. Take a look a the end of a keen dredge I believe they all have one on the intake nozzle.
Kyle, Oregon Gold panner here...you should weld a ubolt or a muffler clamp or something on the end of your Nozzle...will help keep out the huge rocks that can be real annoying....love your Video's brother...have been thinking hard of moving back to Kansas city area.....friends and family in midwest...
So satisfying to see all that deep sediment by the bedrock get sucked up. You just know you're in the good stuff when you're finding pockets between the bedrock. What a spot, and what a machine!
Greetings from the province of West Kalimantan, Indonesia. I really like seeing the location of your workplace in your videos. I have worked in gold for almost 35 years, from the manual method (by panning) to using heavy equipment. (to work for the company) Sorry in advance sir 🙏🙏 I ask permission to give suggestions: I see in the video there is still a lot of gold being wasted (75% of the results are thrown away) because there are still many wrong ways of working. 🙏🙏 Once again I apologize 🙏🙏 if my words are not good and I have no intention to teach or reduce. Thank you 🙏🙏
I work something similar, usually bigger though, but there's throttle control for when a rock goes up and gets stuck either at the nozzle or between the housing and impeller
Dear colleague, do you believe that with this equipment I can remove sand from a lake to dredge it? Of course, I will make adjustments to the pump to route the hose outside the lake.
Have you had other dredges in the past an why have you went with a proline dredge ? I'm in Indiana an bout to buy me a dredge an was looking for others inputs on different setup's. Nice video's also. An gear
Y do u throw rocks right back into the hole u are dredging? I've seen you do it on a number of occasions where you just pull rocks and just drop them right back down to the same hole it's like you're moving the same Rock 10 times
That look pretty cold out nice pickers I noticed that's just air in that suit no hot water huhI'm heading out tomorrow but I'll probably have to break holes in the ice lol 🤣
Hell yea! I just got a beginner kit from amazon today , Going panning tomorrow, we have an old creek out on our property , central Arkansas here ... I’m excited bro
Isn't Arkansas is where all of the diamonds are at? I hope you have better luck than I did when I was younger. My whole family was on vacation down there one year and I didn't know what the hell I was looking for, it was free at the time, but it takes someone with a little geology experience I think. I'm sure there's gold there as well, Arkansas has a lot of geology and it's beautiful.
Hes losing a fuckload of gold. The question is, is it better to be thorough or fast? Which method will net the most efficiency. Despite him doing an incredibly sloppy job and tossing a fuckload of gold back into the river, hes probably netting more gold by going fast.
@@Justaguyyoutubin My father and I were dredging for gold 50 years ago, I suspect he is losing more in weight in fine gold than the nuggets he is collecting, there is always more flour and Mustard gold in rivers than nuggets!
@@ericjensen3662good afternoon, please from the bottom of my heart, if someone can help me and tell me where I can buy one, I would be deeply grateful, please
Man that's almost hard to believe your in Missouri. I live in texas and have a 5 inch proline. I'd love to come dredge with you. Hell you can keep all the gold I just wanna dredge. Last time I went was in Colorado 3 years ago
Not enough fines, dream mat is just no good in a dredge. It’s been tested over and over the vortices break to easily with unclassified materials running over the top. I’m experimenting with drilling out the dream mat wells and sitting it over moss to minimise loss rate, but I think your losing a lot of gold.
When everyone keeps telling you that you are panning too aggressively, then maybe they might be saying some truth? But hey, stubbornness gets the best of us.
The X is too much. All you need is a half inch bar across the front that only protrudes out 1-1.5 inches from the center end, as an arch. Decreases the size of the objects by half but doesn't restrict intake amount
Hey Kyle (&Jamie) Been out of action for a while an just getting back to the subscriptions. You have been a busy Man!!! I read the chicken wire post below. Ignore that, a single bar welded to the outside, off centre, an about 1/2" away from the nozz tip will suffice (an ya won't loose suction diameter. Hope you're both well 👍🍻⛏🇬🇧Rob
Hey can you give some spots up or creek names I would like to try some but don’t want to end up on some bodies property in Mo. still I am in Alton like all the equipment you have.
You have a dream setup. I have to dam up areas, and constantly pumping out water and adding clay to the sides to work a hole like that. So so jealous.. thank you for the video... adds to my dreams.
After dredging that long, then you pan back into the stream without a safety pan?, or the tub? You may have lost some for doing that. But then you'll never know. Could never understand that.
Should always double pan. He just made me cry by the amount of gold he lost. plus that dream mat wouldn't help on flower gold. Even my Keenes 4" double sluice looses flower gold, so i made a long tom to solve that problem!
I wish you had a video on your your your your solution your your system I work at a toy recycling. I’m looking for a system for sucking water and dirt not really so so much for gold,
excellent video friend I recommend you better hit in a circular way ... maybe you threw a lot of gold in that hit ... but thanks for such an excellent video ...
291 sikaflex for your gloves and the knees and elbows on the wetsuit mate it will stop them wearing out, I've been running the same pair of scubapro g flex 5mm gloves for 3 years now and not one hole
If that clean up does not warm u up for more. Do a safety pan with con, you might not lose the fly poops. Sweet haul. Got a question, whats the fuel burn per hour?
Can make your machine a bit longer and place a fine mat near the end, there is probably fine gold getting washed out because of the water power just a thought 😁👍
i love outdoor videos that didnt have any music whatso ever, as natural outdoor sound are good enough & giving real vibe.
if i wanna listen any music, i choose it myself~
Ditto!!!!
Thanks !
That is the first thing that turns me off a video, blasting music! Even if it's music I like.
I agree!!
I dregged for 40 years and I know that all the large stones that build up in the dredge cause you to loose gold. You need a partner to constantly clear the large rocks from the dredge sluice. The fine gold gets washed away with too many large rocks in that sluice. Also you need to clear those flat slate type rocks from the water relief flanges on the end of your suction nozzle. They limit your flow and can cause rocks to get stuck in your nozzle.
so what is your best solution am interested as am new to this thank you very much
To prevent extra work you need steel net in front of the hydro pipe, to not let in the rocks.
No cause then your just picking out Little Rock’s stuck in the screen. all the time
Tradução
That actually would be a great idea, it would be easier to just wipe off the Rocks that can't fit, instead of pulling out chunks
@@fishingvr4520 If a filter or grate extends far enough from the opening the delta-p will be low enough that it can't pick up those rocks in the first place.
good afternoon, please from the bottom of my heart, if someone can help me and tell me where I can buy one, I would be deeply grateful, please
Awesome man! Nice to see I'm not the only one that prospects all year!
Love Ice Cold Gold! Keep rocking brother!
Have you tried panning into your black tote and see if you are panning too aggressively?
Awesome vid mate but trust me you want to piss that Dream mat away an try Gold hog mats Cheers from Australia
Nice video!
What pump do you use?
I just seen a gold flake fly out of your pan at the end of your video when you we're cleaning your pan 🤣
Bruh
Isnt it to fast the water flow for the gold to Seattle?
Hello. I personally like the project very much. The only thing that in my case would put a cross of thick sheet metal like the tube at the tip of the aspirated tube, which had a point facing outwards about 3 cmm. So that the big stones that enter DO NOT DAMAGE THE MACHINE. only that. but the system is very good. regards
Mesin sedonya brapa harga di indonesia
Nice man, Don't listen to those guys who take 20 minutes to do a single pan of dirt, You aren't even panning as aggressively as you could without losing any gold. And I don't care about their opinions either. The only time you have to go slower is when your entire pan is black sand cons, That makes it slightly more difficult.
Thank you my brother, who always provides the best videos, entertaining and inspiring, success always for the channel to continue working, complete black coffee is brewed ☕, welcome to Indonesian gold mining,, greetings from discovery gold999⚒️👍🤝🌺💮🌼🇮🇩
@KYLE fab a 3 prong crow foot of put over the end of your dredge it would help you alot. Take a look a the end of a keen dredge I believe they all have one on the intake nozzle.
Nice Proline and great video work. What part of the country you in?
Hello sir, it's really amazing. I'm from Iraq. I have a question. I can get gold in any river like you
Kyle, Oregon Gold panner here...you should weld a ubolt or a muffler clamp or something on the end of your Nozzle...will help keep out the huge rocks that can be real annoying....love your Video's brother...have been thinking hard of moving back to Kansas city area.....friends and family in midwest...
So satisfying to see all that deep sediment by the bedrock get sucked up. You just know you're in the good stuff when you're finding pockets between the bedrock. What a spot, and what a machine!
The rocks are barely holding weight in water
Greetings from the province of West Kalimantan, Indonesia.
I really like seeing the location of your workplace in your videos.
I have worked in gold for almost 35 years, from the manual method (by panning) to using heavy equipment. (to work for the company)
Sorry in advance sir 🙏🙏 I ask permission to give suggestions:
I see in the video there is still a lot of gold being wasted (75% of the results are thrown away) because there are still many wrong ways of working. 🙏🙏 Once again I apologize 🙏🙏 if my words are not good and I have no intention to teach or reduce.
Thank you 🙏🙏
Hey! If you want to teach, I'll listen!!!
@@stephenhappy6259 can i have your email sir
Looks like maybe your flow isn't right in your sluice. It's only able to catch large nuggets. Just a thought. Cool video.
Angle looks fine id say it's his panning at the end that lost the fine gold
Dropping in for a look see tonight. Sucking up some fairly large rocks for your dredge. Good luck. Hope your finding some great gold.
Thank you ! It worked great !
I work something similar, usually bigger though, but there's throttle control for when a rock goes up and gets stuck either at the nozzle or between the housing and impeller
With all that big gold I expected more fines. You don't run the miners moss?
Dear colleague, do you believe that with this equipment I can remove sand from a lake to dredge it? Of course, I will make adjustments to the pump to route the hose outside the lake.
super vid. what an excellent start to the new year. congratulations 😃💰💰
Big thumb, eyewink, finger gun! Always looking forward to the gold videos!
Thank you !
Catching nicely fine gold or even dust?
Man that looks fun! I have a short gold panning video coming up soon. Prospecting a great hobby ;D
Bro how many meters down and still good suction leve with your current water pump?6 meters most?
how far south have you mined in the show me state? where do you mine typically in missouri?
If I would take a guess, they're in southwestern part of the state around Joplin. It's really hilly there.
Have you had other dredges in the past an why have you went with a proline dredge ? I'm in Indiana an bout to buy me a dredge an was looking for others inputs on different setup's. Nice video's also. An gear
Y do u throw rocks right back into the hole u are dredging? I've seen you do it on a number of occasions where you just pull rocks and just drop them right back down to the same hole it's like you're moving the same Rock 10 times
It's gotta be loaded in there. What state are you in?
A lot of places in the United States won't let you use a dredge. And it's very unfortunate.
That look pretty cold out nice pickers I noticed that's just air in that suit no hot water huhI'm heading out tomorrow but I'll probably have to break holes in the ice lol 🤣
Just a wet suit the air went to my mask and good luck !
Is it possible ? gold dredging powering it with solar panel 🤔?
I keep seeing comments about Missouri, are you dredging in Missouri? Is there reason you don’t use miner moss in sluice box?
Hey! Elro pump for chemicals GP 20/10 EX , could this pump be used for pumping water with sand materials?
Hell yea! I just got a beginner kit from amazon today , Going panning tomorrow, we have an old creek out on our property , central Arkansas here ... I’m excited bro
That is awesome!
Isn't Arkansas is where all of the diamonds are at? I hope you have better luck than I did when I was younger. My whole family was on vacation down there one year and I didn't know what the hell I was looking for, it was free at the time, but it takes someone with a little geology experience I think. I'm sure there's gold there as well, Arkansas has a lot of geology and it's beautiful.
Hi Kyle what brand of dredge do you use and how much was it? Also did it come with a trailer? Cheers buddy's
Pretty sure it’s a proline
what about if you put screen mesh front of the nozel ?
You have a lot of large rocks near the end, do you think you might be losing some gold when a large rock comes along?
Not with the mat I am using !
He is
Hes losing a fuckload of gold. The question is, is it better to be thorough or fast? Which method will net the most efficiency. Despite him doing an incredibly sloppy job and tossing a fuckload of gold back into the river, hes probably netting more gold by going fast.
@@Justaguyyoutubin My father and I were dredging for gold 50 years ago, I suspect he is losing more in weight in fine gold than the nuggets he is collecting, there is always more flour and Mustard gold in rivers than nuggets!
Why change the sluice rifles made by engineers tested by the factory and put dream mats?
How can i buy a set machine like that,,, how much the cost shipping fee include,,I'm from Philippines
Lots of gold in the sluce, but none in the pan?? Did I miss something??
😂 frfr 😂
Don't be selfish! Share the links to those equipments.
Looks awesome my friend. Thanks for sharing. Funny how some people want all your secrets. 😂
Secrets are earned by hard work and persistence.
@@ericjensen3662good afternoon, please from the bottom of my heart, if someone can help me and tell me where I can buy one, I would be deeply grateful, please
Awesome man. Looks like the interior up here. Either way nice job.
Wow, My best friend, Wonderful video dear. I enjoyed watching. Hope to see you soon...
Man that's almost hard to believe your in Missouri. I live in texas and have a 5 inch proline. I'd love to come dredge with you. Hell you can keep all the gold I just wanna dredge. Last time I went was in Colorado 3 years ago
Where do we got these at ?
Why on earth do they not put a bit of mesh on the end of the nozzle to stop large boulders getting sucked up .
Where do I find the mask and harness set up?
Not enough fines, dream mat is just no good in a dredge. It’s been tested over and over the vortices break to easily with unclassified materials running over the top.
I’m experimenting with drilling out the dream mat wells and sitting it over moss to minimise loss rate, but I think your losing a lot of gold.
When everyone keeps telling you that you are panning too aggressively, then maybe they might be saying some truth? But hey, stubbornness gets the best of us.
Looked like he had a good amount of gold and then he started panning 👀
@@alienandroid2012 🤣 bro was pulling some nice pickers and then nothing but fly 💩
"F" 2020 !!! 2021 is off to a very golden start for you Kyle !!! Great strike and video. 👍👍😎
Love when you do videos like this one🤩
Thank you I love making them !
Gooday bro...any of you have an idea if a 4inch water pump 5hp will be good for DIY floating gold dregde?thank u😊
That’s so satisfying seeing all the stuff getting sucked up lol
Li
Are you still in Missouri!?!? This is insane!
I would put two cross bars in an x-shaped pattern on the intake of that . he's beating the crap out of that rig. Big rocks create big problems.
The X is too much. All you need is a half inch bar across the front that only protrudes out 1-1.5 inches from the center end, as an arch. Decreases the size of the objects by half but doesn't restrict intake amount
Where did you buy that breathing apparatus?
Whoa!! Those are some big Missouri pickers.
Heck yeah they are I was in total shock !!!!
Hey Kyle (&Jamie)
Been out of action for a while an just getting back to the subscriptions. You have been a busy Man!!!
I read the chicken wire post below. Ignore that, a single bar welded to the outside, off centre, an about 1/2" away from the nozz tip will suffice (an ya won't loose suction diameter.
Hope you're both well 👍🍻⛏🇬🇧Rob
Thanks rob !!!
Heyyyyyyyyy Kyle , Are you going to make anymore videos ?
Man try a GPAA gold catcher gold pan. I have used those for over 20 years and they are awesome. Get them on Ebay.
Good boy
Great video. Nice nuggets.
Thank you !
tiene mucha potencia al expulsar el agua afuera , no necesita una bandeja más larga para que el oro quede ahí..??...🤔😬
how many displacements is this engine of yours? I built one with a 6.5 engine displacement of 3 inches so I haven't tested it yet. centrifugal pump
crash bars tip on the nozzle would make you 100% more eff. those big stones shake your sluce and knock the gold out
Very good the dredge machine, i need it. How i can get it talk me your place please
Good job ... keep on digging 👍.
Thank you and will do
Hello, how can I buy machinery like this?
What kind of set up is that?
4 inch proline
Hey can you give some spots up or creek names I would like to try some but don’t want to end up on some bodies property in Mo. still I am in Alton like all the equipment you have.
You have a dream setup. I have to dam up areas, and constantly pumping out water and adding clay to the sides to work a hole like that. So so jealous.. thank you for the video... adds to my dreams.
I love dredges....greets from a hobby goldminer from germany bavaria
I checked on dredging in Missouri and state parks says you can't use motorized dredges (unless they changed it). So I am guessing it it private land.
That's none of your business now is it
After dredging that long, then you pan back into the stream without a safety pan?, or the tub? You may have lost some for doing that. But then you'll never know. Could never understand that.
Should always double pan. He just made me cry by the amount of gold he lost. plus that dream mat wouldn't help on flower gold.
Even my Keenes 4" double sluice looses flower gold, so i made a long tom to solve that problem!
His work his gold let him be him.. You worry about yourself. Pretty sure he knows about double panning lol.
I wish you had a video on your your your your solution your your system I work at a toy recycling. I’m looking for a system for sucking water and dirt not really so so much for gold,
So, what state are you in?
Добрый день .подскажите какую по мощности помпу используете?и по эжекторам .заранее спасибо с красноярского края.
Yo at 8:13 to 8:23 or longer you had what looks like a large vertebrae on the left side of the screen, about midway down the hole.😎👍
excellent video friend I recommend you better hit in a circular way ... maybe you threw a lot of gold in that hit ... but thanks for such an excellent video ...
291 sikaflex for your gloves and the knees and elbows on the wetsuit mate it will stop them wearing out, I've been running the same pair of scubapro g flex 5mm gloves for 3 years now and not one hole
I’ll most definitely check into that
Cool information, thank you.
Wow ... Good job brother ..🙏🙏🤗
First thing I thought was I bet those pickers came from around that big square rock.
Please where can I find such a machine؟؟
If that clean up does not warm u up for more. Do a safety pan with con, you might not lose the fly poops. Sweet haul. Got a question, whats the fuel burn per hour?
Oh yeah it warmed me up ! And fuel per hour I mean at full throttle and full tank will last about 3.5 hours I believe !
@@Kylethiemann Thank you for the info, man u having fun there.
Thanks for the sharing..it must cold in winter..God bless
Hey Kyle r u from a little town in Central California
Why do you ask that ? Just curious.
I was just watching you pan a year ago now this! Amazing 👏! You got me hooked subscribe and 🔔✅
I maybe just talking, but the heavy rock run through a stamp mill may prove something.
Mantap. Tapi bagaimana cara memasang ke sifpral dn membuat pasir naik ke pengisapan?
So what do you guess you find in a typical day in $$
石頭打脆變脆石也可賣呀蓋房子抿石皆可用，最好甩石過濾器加安裝金屬吸金器，若有金塊金子才不會跑掉，加油，
Can make your machine a bit longer and place a fine mat near the end, there is probably fine gold getting washed out because of the water power just a thought 😁👍
Yeah Man!..Getting after it--Great job u2!...Hey is the Nugget Trapper for sale yet?
Thank you and not yet finishing up everything on it sorry for the wait but it will be worth it !
Awesome gold bro!
Thank you !!!!!!
@@Kylethiemann yw. How you likin the dream mat?
How much would those little bits be worth? Just curious.
if you had a valve near the handle , could you close it to make the rocks drop? you would need a dump behind it i guess