Rain Bird ESP-ME3 Basic Programming
Вставка
- Опубліковано 20 лип 2024
- Learn how to set the date and time, set watering start times, set station run times, and set watering days on the Rain Bird ESP-ME3 irrigation controller.
Shop Rain Bird Online: store.rainbird.com/ - Навчання та стиль
It looks like other people might be having the same problem I am...After it goes through a whole cycle of all zones it runs through it again. How can we stop that?
That's my problem too. How do we get a reply?
Question for the watering day setting, do we have to pick one or the other between specific calendar days vs cyclic days? Or, do both apply? So if I have Mon-Sun on “on” for all of the days and cyclic set to water every three days, I thought it’d cycle every three days through the days I have enabled but since my sprinkler went off this morning... I’m guessing this is not the case?
For the person with the same question, its either or, not both
What’s the program mean?
Aparece un dibujo en el lado derecho inferior del progranador como de rulos horizontales....que es?
No he podido conectar.....tengo alguna conexion mala?
How do I an EVERY OTHER DAY schedule? Or even EVERY THIRD DAY?
Is it possible to run a zone with 3 valves running once a day and another zone to run 4 times a day where I reseeded a specific area?
It's not clear how to use the different start times and exactly how you can connect them with different zones to have some zones start at different times then others. Or is that even possible - I'm trying unsuccessfully to figure that out.
What would cause our new timer control box to restart cycles a second time on the same day hours later. We have checked and confirmed all settings are correct?
For anyone that comes across this in the future, each program has 6 start times. Put the dial on start time, then press the right arrow confirming: 2nd Off, 3rd Off, 4th... Etc. If one of the 6 shows a time press the "-" button until you get to off
This would be better without the music.
Why is it restarting cycles?
For the next person: because you have 2nd and 3rd start times
Put the dial on "start time" you should see "1st x:xx" now press the right arrow you should see "2nd off" if you see "2nd x:xx" press - until you get to off, now press the right arrow you should see 3rd, repeat, do this until you cycle back to 1.
If you do this and a zone or more still comes on multiple times you're using multiple programs for a zone or zones, and at this point you should prob pay a professional.
How do u get all stations to work at the same time?
I can not clear the manual watering ICON. why ? Is it suppose to go away when not needed ? It has locked my unit to only run in manual. WTF
How do you DELETE a run time?
To delete a run time, turn dial to Start Times. Then use the arrow key to select the number of the program to delete (it actually just turns it off). Then use the + or - buttons to turn the start time to between 11:45pm and 12am. For some inane reason this start time is the default "OFF" setting to turn a program off. To turn it back on just change the time to anything but that specific start time.
Hallo mein Bester,
ich habe mir RAIN BIRD ESP -TM2 (Mit Knopf) gekauft.
Ich habe nur zwei wasser ventiele. benutze ich nur den A und B.
Wie mache ich das in Program A ein mal am tag Gießen solte in Blumen feld 1, 45 min . und an den gleichen Tag in Feld 2 Beume Gießen solte in Program B 45 min.
Aber am nächsten Tag die selbe Spiel aber pro feld 30 min.
Danke
what happens if you have 12 stations. Do you do station 1-6 on program A then station 7-12 on program B?
Say you want each station to run 15 minutes does that mean when in Run Times for Program A you set 1-6 for 15 and 7-8 for 0 and when in program B you set Run Times for 1-6 to be 0 mins and 7-8 for 15 mins?
Your demo only deals with one program or 6 or less stations and the printed user guide is no better at explaining what happens if you have more than 6 stations. Advice is greatly appreciated as stations 1 through to 13 are not running in sequence even though start times have been entered so that they should.
This is exactly what I want to know!
Were you ever able to figure this out?
Having same problem
I need 7 sets I can only get 6
Lo necesito en español gracias
what is a program? This tutorial is much too vague to be helpful. You start right off by talking about a program, what is a program? Terrible tutorial.
I agree -----totally useless
a program runs through all the zones on the day you set it to. So you can set up different programs to run a different times on different days. all of this is done in the e”start times” option. The “run time” option sets what each individual zone does.