Hey man love the concept and already bought the print can you show a video how you set up the wire connection from the motor to the battery because I am trying to make one with a switch inbetween the battery and servo itself but is confusing me I am new to engineering and your work inspired me to get more into the field
Yes the bb transport wheel are direct drive. And the other gear is to make sure bb Don't get stuck in the opening so it mix the bb in front of the hole
Hi. Thank you for the great idea. I built your construction and used a 35kg motor. Unfortunately, the motor is not strong enough to fill a magazine. Can you fill a 140 magazine with your motor? I need help.
Hi mate, Nice design but i have the same problems than Akim. I am using a 2s lipo 1100mah 50c and the 35kg servo that you recommend and it is not enough strong to fill my mags…
Bonjour, je comprend pas j'ai tous bien réaliser comme dans la vidéo, mais les billes bloque au bout de quelques seconde et sa casse les dents de la grande roue je comprend pas pourquoi ?
I have the same issue! It got a little bit better when i sanded down both parts on the wheel. But still same. I have printed several in different materials etc, but with no luck. The author is not responding either :-(
it does not matter what brand you use. as long as it pulls by 35 kg. it is purchased on AliExpress. and be aware that it must be able to rotate 360 degrees
yes you have to remove the circuit bord anyway, becouse you have to run the motor on plus and gound, from the battery.. if you dont remove it you have to make a circuit bord and then program it to make it spin... . so remove it all and then combine the + and - from the motor ind the servo to the battery
Le felicito por el video, tienes los mecanismos en venta?
thanks for the video i well buy the print :D
What length is the metal ramp you made, and where did you get the material?
Where can I find the file?
Dis toi find something to make a speed loader ?
Salut mec, je n’arrive pas à trouver le même servomoteur de toi, as tu la référence ?
Hey man love the concept and already bought the print can you show a video how you set up the wire connection from the motor to the battery because I am trying to make one with a switch inbetween the battery and servo itself but is confusing me I am new to engineering and your work inspired me to get more into the field
Same ! :O
Where did you find the file ?
@@Brhm.h on the link
How long does it take to fill an EPM1?
Nice design but what is the inner cog wheel for? The bb transportation wheel is directly connected to the motor, no?
Yes the bb transport wheel are direct drive. And the other gear is to make sure bb Don't get stuck in the opening so it mix the bb in front of the hole
@@ferslev307 thanks, was asking myself the same question :-) ... did you tried with just one wheel? not really seeing it could be a problem....
are there any links to electronics components and assembly of wiring
А какую роль играет малая шестерня?
where can i get this print?
how to connect the black and red wire to the servo motor?
Where can i get the 3d design please?
donde se puede descargar el archivo
Hello, are you still there ;? I have question to you
Hi. Thank you for the great idea. I built your construction and used a 35kg motor. Unfortunately, the motor is not strong enough to fill a magazine. Can you fill a 140 magazine with your motor? I need help.
Yes I can. I have some very strong mags and I done have issues
How big is your battery ?
Hi mate, Nice design but i have the same problems than Akim. I am using a 2s lipo 1100mah 50c and the 35kg servo that you recommend and it is not enough strong to fill my mags…
for me its not about the motor streng. Its about gear 3d printed streng - its broke, i want to make a metal one
@@atlasvltor7260I was about to buy his plans and machine it out aluminum. want me to make you an extra?
How long does it take to fill up a midcap mag?
So, where can we buy this kit, and is a V2A-Version planned?
i downloaded the file put on how big did you scale it ?
what kind of battery did you use to connect the servo? I was thinking to use a 7.4v LIPO or a 8.4v Nimh.... is it possible? thanks.
You can use that it's fine
Bought the print on cults 3d but it's missing the little spacer you push into the bb wheel?
The little "spacer " you talk about will you get when you buy the servo motor. Thy come with some spacers
Do you recommand a 180 or 270 degree for the motor ?
It's not important. You have to remove the stop pin an circuit bord in the servo motor anyway ;).
Bonjour, je comprend pas j'ai tous bien réaliser comme dans la vidéo, mais les billes bloque au bout de quelques seconde et sa casse les dents de la grande roue je comprend pas pourquoi ?
I have the same issue! It got a little bit better when i sanded down both parts on the wheel. But still same. I have printed several in different materials etc, but with no luck. The author is not responding either :-(
Salut, vous avez eu l’es fichier 3d ou ?
what is the brandname of the servomotor ? do you maybe have a link where i can buy it?
Thanks
it does not matter what brand you use. as long as it pulls by 35 kg. it is purchased on AliExpress. and be aware that it must be able to rotate 360 degrees
I don`t understand what kind of motor i have to use. There`s a lot of angles (180, 270, 360). In your link, the only 360 motor has 30kg only.
You have to remove the stop pin an circuit bord in the servo motor
@@designandprint5196 even buying the 360 motor?
yes you have to remove the circuit bord anyway, becouse you have to run the motor on plus and gound, from the battery.. if you dont remove it you have to make a circuit bord and then program it to make it spin... .
so remove it all and then combine the + and - from the motor ind the servo to the battery
Link servo please
Where dis you find the file ? Pleasssee
I found only this: 1x 360 30KG Servo
link of the motor ?
I buy i on AliExpress so i done have the link. Fine one to pull 35 kg
hvor er moteren købe hende
on aliexpress
.
Har du et link til den du købet
@@skaldefsfkdf3793 nej det har jeg ikke. jeg søgte bare på aliekxpress og så fandt jeg denne
Where can I find the file?
Did you find something to make a speed loader ?