Installation and Clutch Calibration Guide for Odin Style Airsoft Speedloader Paddle Wheels (Update)
Вставка
- Опубліковано 4 лют 2025
- This is an updated video on how to install a replacement paddle wheel into your Odin (M12 Sidewinder) style speedloader, and then how to calibrate the slip clutch to ensure you are fully loading your specific mags, whilst preventing avoidable damage/wear to your paddle wheel.
You can buy my highly rated paddle wheels here: www.ebay.co.uk...
You can buy my Universal Mid Cap Unloader here: www.ebay.co.uk...
Make sure you check out my other listings too!
More information regarding the use of EPM 1 mags with Odin speedloaders can be found here: odininnovation...
Any questions? Just send me a message or leave a comment.
I have to say, I just got the paddle replacement and it works like a charm! It just saved my Odin speed loader!! Thank you so much and keep it up!!! you rock!!
Thank you so much!!!
so lets get this straight. this man not only:
shows you how the speedloader works
how to adjust the clutch
explains the difference between cheap&expensive
tells you how to replace the busted paddle wheel
provides his own (next day and i'm sure i ordered it at night)
but he also shows you how to configure it properly, to not need to buy as many replacement parts from him to keep your speedloader
epm 1 mag springs are a nightmare! i can't get them to fill all the way up at a comfortable clutch setting so i'll speedload the rest, they do have feeding issues so i might just run them as far as the new clutch settings allows.
thanks for the part, knowhow and fix
Thank you for the kind words!!
Thank god for pointing this out, I've been struggling so bad with EPM mags and was about to throw the speedloader in the bin. I really like the fact that epm mags have the red dot to indicate fill size, any ideas of other mags?
I thought I broke my Odin speedloader by cranking it too hard too many times and while there is wear on the clutch teeth, tightening the nut was all I needed to get it working again. Great video!
I'm very glad I could help!
Thanks for the video this helped me out so much i was going to wing it but i found this video because i bought ur item off ebay!
You're welcome! I'm happy to help
This vid was great just got our kit an son overwound loader on first few mags. What’s your website for replacement wheel pls we got made in china one. For 15. No instructions. Now I know how to set up. Thanks for vid 👍👍👍
Thanks! I sell mine here: www.ebay.co.uk/itm/115122187223
Ah you made an updated instruction, cool :) Sub+1, great tech contenct :)
Hi mate, got your carbon wheel and it's worked fantastic. Wondering if you could make the cover that goes over the wheel. Cheers.
Just ordered 3 pcs of this as it's been what I've been looking for since my well "Burntout" however not sure on the progress of it. Would like to ask for your help if you have any visibility on it. Love the product and great vid
I recommend printing the paddle wheel vertically.
The horizontal load has a way of breaking paddles printed on this orientation
@FalloutProto the tradeoff between needing supports, but the layer lines are perpendicular to the load, as the wheels are printed vertically, instead of having no supports but the layer lines are parallel with the load as they are being printed horizontally, isn't worth it. I find the wheels are plenty strong enough when printed horizontally. I've never seen a failure at the layer lines.
Thank you for this video
Looking to purchase your improved paddle wheel for Odin sidewinder using EPM 1 midcap mags. Which do you recommend? Also for US delivery, please advise.
@@m.c.crypto8927Hi, for EPM 1 mags, I recommend my nylon carbon fibre wheels. I ship to the US as well, with or without tracking.
I have bought an Odin speed loader, previously the rotation when the magazine was full would feel hard but I rotated it too hard when the magazine was full so it couldn't stop the rotation when the magazine was full, I need help.
@@jonatanzeronus1402 I'm not sure what your problem is... can you try explaining it again?
Hello, just placed an order. I chose the carbon version. I want to load tm akm gbbr mags and need a wheel that can handle the stress. Right choise?
I would say so! But i have not tested with these mags, but I can't imagine there are any mags out there that are more difficult to load than EPM 1s. But if these dont meet your expectations, let me know, and we can sprt something out!
I'll have this dispatched tomorrow for you. Thank you! - DJM
@vincentduinkonijn5875 yes! Dispatched 23rd of February. As it's an international order it may take longer than expected. Get in touch via eBay if you need more assistance 😎
@@vincentduinkonijn5875 I just sent you a message on eBay!
@@DJMitch117 was able to read your message in the mail. On ebay message not visable. I have sent you a message on ebay.
I know this is old, but what size is the o ring mine fell out or something, and now BBs just fall out and never hold. Even just trying to load a mag only does about 140 of 190/220 round mags I have and taking it out drops like 6 BBs
@@sniper321fireI don't have the o-ring to hand, but it'll have an internal diameter of just below 6mm if that helps
@DJMitch117 ok, I'll just get some and see what works. Thanks for the information though
do u mail to malaysia??
Yep!
You can't know if a magazine is loading to max capacity untill you actually count the BBs loaded by dumping the BBs into a tray to count. ive found this Odin Sidewinder only loads to 65% of the max capacity before the clutch slips, fully tightened
Counting the BBs is one way, or you can load using the sidewinder, then try loading more BBs with traditional speedloader. With a transparent pistol speedloader (like what I use in the video) it's possible to see how many more BBs the mag accepts after using a sidewinder. I cover this at 13:35.
Did you test these on gbbr mags with adapters?
I have not, but if the GBBR mags + adapter work with a stock Odin, I don't see why this wouldn't work also.