I've just bought a disco 2,2004,td5,thanks for putting this video together and sharing, plus l like your own design light mods plus you have made a awesome rig,anyways thanks for sharing the ideas, regards Roy
Nice stuff...particularly like the LED convenience lights for entry and floorboards. Would be nice to add some to the engine bay as well...would be nice for having to do work in the (otherwise) dark!
Nice work man !! it look's great .. i've been working on mine for the last 2 year's i'm almost done i'll make a vid when it's finished.. I own mine 12 years now they're the best vehicle by far..
PFinty ohhhh nice! Keen to see yours when you make the video!! I think this will be my 2nd year of ownership of this car. Before I had a D2 which I owned for 3yrs. Now I can't say much as IV only ever driven the 2 d2s, but I do also love this car to bits!
I put a few pic's on here plus.google.com/u/0/communities/106209641302719382921 It's a public page so there's some stuff from other people but you can an idea of what i've done inside and out but there's been more done since then and now i've got RANGE ROVER heated leather seats ready to go in hopefully this weekend .. lot's more has been done since these pic's were taken
will do, i can wait to get them in there special.. I'm proud of the the center console i put led's through the hole thing even in the switches i moved the door switch over to the right added a tyre pressure monitor, in and out temperature and a smiths analogue clock with the 2 rows of switches, it's rock's big time !! it took major hours.
Hi man nice disco you have there!! Could you explain better how you did the headlights mod? Which led lights do you use, the led rigs... sorry but It looks really awesome, congrats!!
Thank you! Glad you like em! So I got all these from "the Retro fit source" I used the 120mm switch back halo ring on the highbeam ring, 110mm switch back halo ring on the projector shroud. Morimoto D2s 4.0 for the projectors And gatteling gun 2.0 for projector shroud. H7 harness used for direct fit to factory loom. Now with removing the lens, remove 2 screws on the indicator side, then heat up the headlight with a headgun or maybe even a hair dryer to soften up the adhesive. Once removed drill a hole where the low beam bulb goes into to suit the projector. (Unless you get a Morimoto H1 7.0 it's a direct fit into the H7 hole) test fit and align (rotation if D2s style projector) once your happy put the LEDs rings in place and the projector shroud. From here it's all wiring high beam to highbeam and what not and re-assemble. I think I covered everything? If I missed anything or you want to know more let me know! Be happy to help you
If you do decide to lift it, fit an adjustable panhard rod. APT do one for the D2a, make sure you specify D2a as they are not the same as the D2 one. Also why is there a square thing stuck to the windscreen? It looks a little like a P-plate but it appears it could be a HUD.
Okay I'll keep that in mind! Hopefully apt still makes things for the D2! Last time I looked there's barely anything for D2 :/ currently running 3" so i probably should aye. Also that square thing is for a HUD
Hi there. In this one, or another of your videos(I forgot wich one, I’m sorry) it seems you have any kind of cover for your gauges on the center console. Can you tell wich one and how to install??? Thx a lot
Centre guage pod was custom made. Unfortunately I can't remember who made it, but if I ever do find out again. I'll let you know. IV currently got it held on with Velcro.
Thank you very much! here is the link to where I bought it from www.britishpartsofutah.com/Discovery-Front-Driveshaft-Drive-Shaft-TVB000110-p/rcd2fds2.htm
ryanhenry21 no problems! Sorry for the super late reply, I didn't get a notification that you replied :/ but yes go for it and thank you!! Much appreciated
can you add links to where you buy this stuff? the headlights are super cool, the disconnects the winch bumper and so forth. Its the disco i wanna make of mine. 04 v8..
Headlights I modded my self by buying parts from "The Retro Fit Source" I cant seem to find the site I bought my swaybar links though... may have closed down unfortunately. ARB Deluxe bar was bought second hand, rock sliders are from terrafirma and rear bar was from ebay!
To the "auto/door" setting on the interior light switch. You will need one permanent 12v "connected to LED +" and one switched (door setting) "connected to led -” if I remember correctly..
hello adventure awaits , we went to the site you send us and we didnt find the head light that you are showing in the video.can you write us please what is the name or number of item? thanks a lot we want to order this item.thanks
Hello, the head light was a retro fit so you won't be able to buy it anywhere unfortunately.. but if you're up for it, I bought all my parts from TRS HID Retrofit קרן ויניב בן נון
@@aarenmyatt4509 still got the beast 😁 I'd like to do some videos but I currently don't have the time right now 😔 but when I do I'll definitely be making some!
I've just bought a disco 2,2004,td5,thanks for putting this video together and sharing, plus l like your own design light mods plus you have made a awesome rig,anyways thanks for sharing the ideas, regards Roy
Glad you found it interesting! Much appreciated 😁 thanks
Td5 looks a treat. and, yes, good drone shots and editing! Did I mention the lights - two big fat thumbs up!
thank you very much!!!
Awesome video mate and awesome mods!! I'm pretty jelly of those headlight mods!!
Nice stuff...particularly like the LED convenience lights for entry and floorboards. Would be nice to add some to the engine bay as well...would be nice for having to do work in the (otherwise) dark!
Great video. This reminds me that i got a lot of work to do on my 2001 LR Discovery V8.
Great video man! Love the drone shots and the editing! :D
thanks! like the day to night transition? haha
Looks awesome 👍
Modding the headlights is awesome. You should do a detailed video of how. I want to definitely do it, but So risky!
davidisdivad it definitely is risky!! I did make a video, but I wasn't able to upload or edit them as my files went corrupt... :/
might consider the facelift lights on my d2...nice MOD video!
UK Comms Prepper yew! Thank you!
Niiccceeee mods man. Exactly what I want to do to mine!!
Stephen Fewson thanks! Glad you like em! Wish you the best in modding yours buddy
Nice work man !! it look's great .. i've been working on mine for the last 2 year's i'm almost done i'll make a vid when it's finished.. I own mine 12 years now they're the best vehicle by far..
PFinty ohhhh nice! Keen to see yours when you make the video!! I think this will be my 2nd year of ownership of this car. Before I had a D2 which I owned for 3yrs. Now I can't say much as IV only ever driven the 2 d2s, but I do also love this car to bits!
I put a few pic's on here
plus.google.com/u/0/communities/106209641302719382921
It's a public page so there's some stuff from other people but you can an idea of what i've done inside and out but there's been more done since then and now i've got RANGE ROVER heated leather seats ready to go in hopefully this weekend .. lot's more has been done since these pic's were taken
PFinty very nice! I see you done quite alot to it!!I like it. Let me know how the seats go when you install it! I'm pretty keen on that!
will do, i can wait to get them in there special.. I'm proud of the the center console i put led's through the hole thing even in the switches i moved the door switch over to the right added a tyre pressure monitor, in and out temperature and a smiths analogue clock with the 2 rows of switches, it's rock's big time !! it took major hours.
Hi man nice disco you have there!! Could you explain better how you did the headlights mod? Which led lights do you use, the led rigs... sorry but It looks really awesome, congrats!!
Thank you! Glad you like em!
So I got all these from "the Retro fit source"
I used the 120mm switch back halo ring on the highbeam ring, 110mm switch back halo ring on the projector shroud.
Morimoto D2s 4.0 for the projectors
And gatteling gun 2.0 for projector shroud.
H7 harness used for direct fit to factory loom.
Now with removing the lens, remove 2 screws on the indicator side, then heat up the headlight with a headgun or maybe even a hair dryer to soften up the adhesive.
Once removed drill a hole where the low beam bulb goes into to suit the projector. (Unless you get a Morimoto H1 7.0 it's a direct fit into the H7 hole) test fit and align (rotation if D2s style projector) once your happy put the LEDs rings in place and the projector shroud. From here it's all wiring high beam to highbeam and what not and re-assemble.
I think I covered everything? If I missed anything or you want to know more let me know! Be happy to help you
If you do decide to lift it, fit an adjustable panhard rod. APT do one for the D2a, make sure you specify D2a as they are not the same as the D2 one. Also why is there a square thing stuck to the windscreen? It looks a little like a P-plate but it appears it could be a HUD.
Okay I'll keep that in mind! Hopefully apt still makes things for the D2! Last time I looked there's barely anything for D2 :/ currently running 3" so i probably should aye.
Also that square thing is for a HUD
Nice truck!!!
If you're buying one how what is the recommended miles I know lower is betterbut what happens if you have no choice to buy a high mileage 1
Hey Man, your really doing this d2a a solid work over. Nice job. Have you perhaps got a Aulro build thread?
Thank you very much!! I unfortunately dont have any build thread :/
Hi there. In this one, or another of your videos(I forgot wich one, I’m sorry) it seems you have any kind of cover for your gauges on the center console.
Can you tell wich one and how to install???
Thx a lot
Centre guage pod was custom made. Unfortunately I can't remember who made it, but if I ever do find out again. I'll let you know. IV currently got it held on with Velcro.
Thx a lot dude. I’ll be alert!! Nice disco by the way
Hi. Really beautiful. I bought my Discovery 2 4.0 face-lift. Where can I buy this items from?
Thank you very much! here is the link to where I bought it from
www.britishpartsofutah.com/Discovery-Front-Driveshaft-Drive-Shaft-TVB000110-p/rcd2fds2.htm
Adventure Awaits 4x4 Thanks a lot. I appreciate your work in your Discovery
Nice truck. How did you get the welcome lights to stay on? Where did you draw you power from?
ryanhenry21 thanks mate! I got the power from the BCU. Managed to find the wire that controlled the interior lights and I just piggy backed off that.
great idea. i might copy you if thats cool. Ive got a 2004 Disco 2 td5 and love it! your vids are great mate-subscribed!
ryanhenry21 no problems! Sorry for the super late reply, I didn't get a notification that you replied :/ but yes go for it and thank you!! Much appreciated
Awesome work, thanks for sharing.. ECU chipped ?
Aaron Kent yes its got some sort of a remap done to it. Not too sure what it now much power it's making though.. but definately quicker than standard
can you add links to where you buy this stuff? the headlights are super cool, the disconnects the winch bumper and so forth. Its the disco i wanna make of mine. 04 v8..
Headlights I modded my self by buying parts from "The Retro Fit Source" I cant seem to find the site I bought my swaybar links though... may have closed down unfortunately. ARB Deluxe bar was bought second hand, rock sliders are from terrafirma and rear bar was from ebay!
im glad you like the mods I'v done!! wish you the very best for your modding your rig!!
What did you connect the mirror lights to
To the "auto/door" setting on the interior light switch. You will need one permanent 12v "connected to LED +" and one switched (door setting) "connected to led -” if I remember correctly..
hey, I also own a D2 and was wondering where did you get your lock lights for your mirrors?
Geeontay Green hey
I got them off eBay 😊
thank you, but how was the installation
and what would i search?
if you could send me a link or anything to help i would be very grateful.
Geeontay Green here's the link rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F172413735746
Do. You still have your landrover discovery 2. ? Hi from Ireland 🇮🇪☘️
Yeah mate still got it! Looks alittle different now though
nice vid man
Thank you!!!
hello adventure awaits , we went to the site you send us and we didnt find the head light that you are showing in the video.can you write us please what is the name or number of item? thanks a lot we want to order this item.thanks
Hello, the head light was a retro fit so you won't be able to buy it anywhere unfortunately.. but if you're up for it, I bought all my parts from TRS HID Retrofit קרן ויניב בן נון
What year model is that rig.. post 2004?
Hi mate it's a 2004👍
@@adventureawaits4x457 do you still own the beast? Any plans on making some more videos?
@@aarenmyatt4509 still got the beast 😁 I'd like to do some videos but I currently don't have the time right now 😔 but when I do I'll definitely be making some!