Expandacraft Two Sided Outrigger Kit for Canoe or Kayak
Вставка
- Опубліковано 6 вер 2024
- A look at the Expandacraft outrigger canoe kit.
Will fit most any canoe with the included gunnel attachment kit.
Visit our website at www.expandacraft.com today to learn more!
Yes you can have one with 12 ft outriggers and this one sails nicely too. Basically you can build whatever you can dream up.
Looks like your line has expanded nicely Wes! Keep up the good work and hope you become a millionaire!
Nice, I seen a similar set up with 400 watts solar panels to power the troll motor.
I would design ADJUSTABLE risers, so you could have one setting during travel, for less drag in the water, and another setting while stationary for more stability.
Brilliant.!
Might be tricky on the Buffalo River, but I don't go anywhere without my dogs & have been thinking about outriggers for awhile. Hollow with snap on covers so we can pack the light equipment in the outriggers. Looks like I'll have to design & build my own.
Thinking that same thing, I have a 19 foot Grumman square stern canoe and a 7 hp Chrysler outboard.
I just bought one I am so excited
I am trying to set up a couple kayaks with long outriggers. (Son fell over when it was 35 degrees in October in Minneapolis.) Are there places in Iowa that sell both? And since we are seniors, for us we need that high seat. Maybe a canoe would be better, how did you add that high seat? Leakage problems? We do have a truck so weight wise, kayak would be better bc we do not want a trailer. You know, what you made is terrific. I’ve looked at a lot of UA-cams, your is the best! Thank you. November 17, 2023
Hello. Best is to padell or sail in no shark waters. Thanks for the moovie!
I love sharks!
very nice set up, exactly what I was thinking of for me and my dogs. how much please for the bracket and pontoons, everything I see there excluding the canoe. Thank you for your time. Terry
This set up starts at $2000 but you could order it custom or do part of it yourself. Some clients prefer hard decks over netting.
really thinking about purchasing this for the vacation at Cape san blas scolloping in the bay it's really shallow and you wouldn't have to worry about tide.
Yep, the draft is about 3 or 4 inches.
Do you have the motor just clamped directly to the side of the canoe?
This video is many years old, I don't remember how that little motor was attached, but these days, I have motor mounts for different craft which work very well.
that net is tougher than you may think. Can't tear it with pliers do you dog isn't a problem
where does one get the net and what do you call it?
@@JoeRetro101 multihullnets.com
That sure is nice!!! sure wish it was portageable for fresh flatwater. That is a really nice idea my man!!!!
It only takes 5 minutes to break it all down and you could put it all in the canoe and use wheels under it.
Dude - put two solar panels on that and you can drive around with no pit stops required - you can sit on them in the blazing sun - they don’t get hot
Will you're outrigger kits work on a 14foot narrow Jon boat
You bet, I've put these kits on so many types and sizes of canoes, kayaks and other boats, I can't list them all. There are several connector kits for various craft, and in some cases, you simply strap the crosstubes onto the canoe or kayak. Seriously, I don't know of a canoe that I couldn't fit.
Where do you get the 16' out rigger canoe? Thanks
expandacraft.com
Dude I live in Minnesota Land of 10,000 canoes. I want one.
Will this work on a 14 foot tandem kayak
Yes, it would be longer than the yak, but the wave piercing bows are designed to lead the center hull. It would give you a massive amount of space and extra flotation for hauling gear of a sail.
This is an awesome setup just need more powah
how much would this rig cost me if i already have the canoe. with the netting and everything.
any discount... seems awesome but really expensive...
AWESOME....i looove living in tampa bay.
from 2013?? How did I not see this video before.
I could sleep on these
Boat not registered, the marine patrol would have a field day with you, very cool design though.
in my state you only need to be registered if your boat is over 16' or is engine powered. electric power is exempt.
Bonjours,
Ou je peux avoir comme ces stabilisateurs.
Merci
Something tells me you have been to the Philippines. Might try using a square end canoe and slap a motor on it.... Americans want speed.
Expandacraft will be at the Gulfport FL Nautical Flea Market on Saturday, March 16 2019 so come by and say Hi! facebook.com/mygulfport/photos/a.178079139210331/848567418828163/?type=3&theater. You can get the netting material at multihullnets.com. Expandacraft doesn't resell the netting.
I always take my 65# dog with me on my canoe will the net hold up and net tear with his claws?
That is the toughest webbing you can find, you'd need a knife to cut it.
can u put these on a 14 ft aluminum boat
Yes, we have done that on a few Jon boats
Good for fishing I say…
Great video, would really like to add that to my Christmas wish, about the pontoons do they have to be that long or can you make them shorter? I run on the Great Pee Dee River in Rockingham N.C. also could I get it without the nets, would replace with plywood and carpet it. Would use for camping weeks at a time.
+Sonny Aycoth Yes, you can buy the pontoons in sections, each section is 4 feet long, so u can buy 1 center and 2 bow sections or more center pieces to make it longer. each section is 100$ i think, its on their website. And thats what i was wondering too about the nets, i wanted to get it without those nets( cause they look really weak) and buy super strong cargo netting to hold my camping supplies.
+Sonny Aycoth and I'm guessing u want to use this idea for canoe camping on the river? i love being out there on a canoe for a few nights :)
Well, it's Christmas time again, ready to order?
Absolutely
Give me a call and lets get you set up, 813-810-2554
That looks good for fishing were can i buy the green plastic things brother
www.expandacraft.com
J. Wesley Stevenson ok thank you for replay
GENIUS ! =D
Ha, you guys beat me to it! I had the idea to make this a few years ago. Good on yah! How much does one of these cost?
The hull parts are $129.00 each and the aluminum crosstubes are about $80 or so depending on size.
@@Expandacraftboats thanks, my father has wanted a fast cruising, day sailer for a while now, but little place to store it at our rental property. Looks like with some of the old windsurfing rigs I’ve got and this, I can rig up a sailing canoe that renters can use as a canoe when we’re not around.
pretty neat set up. Do you ever think you might be better off with a bigger boat?
Bigger isn't always better but I'd build one if a client wants it.
J. Wesley Stevenson what I mean is rather than addind outfitters to try to make a canoe bigger, why not just graduate to a bigger boat: a boat with a bigger hull and more space?
HELLO from Canada the land of bugs,snow and ice......sigh
I have a 17 foot old town canoe that does not have a square stern .....I have a 50 pound thrust and sail kit I have used .
Now I am retiring to Vancouver island in 2018-2019.
I want to buy a 2.5 Yamaha or a 4 hp still researching someone who has 20 years at that.
Do you have these pontoons up here in Canada or do I have to run to Florida in the winters as I will be in the US in winters if America still accepts Canadians and Mexican in ?????
We did build a 21 X 8 tri hull which had plenty of space. It's on youtube too.
Nice boat. How much to get these outriggers to Australia?
We ship all over the world. Check out myus.com for shipping cost.
What do you do about a keel/daggerboard?
We have had several swinging centerboards which have performed very well in the past. Very simple to retrofit and better than dagger-boards because they swing up when beaching.
luv it lol
I cant find the kit anywhere :(
This is a one of a kind so we don't offer a kit. We can build another if you want to order one just the way you want it.
u sell that white netting in kit aswell?
I wanna take it in the ocean
really nice Boat!
How about with a Sail?
We did sail this on and it did fine in light to modest wind. I wouldn't take it out the the big waves as it is not self bailing. One like that is in the works.
@0.35 its flat just like the Earth!
That's no longer a kayak or canoe!
You are correct, it is so much more now.
With a gas engine
Wouldn't need more than a 2 hp
6 to 8 people on that??? NO Thank You!!! haha
Not that you would want to, but it's nice to know that you could if you had to.
один поплавок лишний