@@pescadorestamoraI was going to say this is a PR knot. I use an FG on most of my rigs except my heavy jigging set where I use 80lb braid and 100lb leader - this is when I use the PR knot.
@@pescadorestamora I would say it is a PR knot. Typically though, a PR would have 30 winds. (IMHO). Like I say, I only use this on my heavy jjgging set up.
Most of my fishing is for bass, so forgive me for asking a question related to scaling down the line size. Although I typically tie an FG, my question applies to both the PR and the FG. In order to make the knot smoother when reeling through guides, level winds, and to prevent the knot from “catching” other coils of line on the reel when casting, I typically tighten the main knot after one or two half hitches, add another 5-10 half hitches over both mainline and leader, then trim the leader and apply the Rizutto on the braid only. I can't think of any reason this would result in a weaker knot, but I'm curious if you think it might. Thanks.
sir, the knot as you said, putting Rizzuto on the braided line will not make it weak and the knot will make your line smoother. Please correct me if I'm wrong sir 🙏
I like cutting off leader before the rizzuto because it then covers that leader and feels like a smoother transition through eyelets. And a dab of super glue because you can have the sharpest scissors on the planet and your braid will still manage to want to fray when cutting lol. Beautiful looking knot.
Looks somewhat easier then the FG with all the wrapping around your fingers, standing on the line etc. Same result a good knot just seems a little easier Thanks
I hesitate to say, because I've never tried it. But I recommend that you use the Alberto knot to make braid-to-braid braids and I have used the Alberto knot and the results are good. Next video I will make a tutorial
Yes the PR knot is very effective for joining braid of different thicknesses. This knot is known as the PR knot and is indeed stronger than the FG knot. It is usually tied with a special bobbin.
I know this knot is amazing! And I love the art of it. But I can confidently say, I will never take the time it takes to make this lol. I’d do all that and then just get snapped off by a barracuda or get snagged and be pissed. 😂😂
Great knot, will give this a go. Question, When you go back 20 wraps, is it essential you stay right inbetween the previous made wraps or is it ok if some overlap the braid from the first 20 wraps? Ta
It should be possible, because in the last 20 wraps after you finish with the first lock, you will pull it into a smooth braid like I did in the video. but if you repeatedly overlap the nodes, it will make it difficult for you to pull out the first lock. hope it can be understood 🙏
Some humble thoughts... 1) I'd say the strengh should be the same a the fg knot. Based on the physics, both knots use to take a bite into the leader. 2) Because the fg is bound with both ends of the main line from the same side instead of coming from one side, turning and wrapping back, the bite into the leader might be even better than your version? But... with 20 wraps it shouldn't matter any more. ;-) 3) The last knot (a grinner?), I'd make it a little bit different. Here's how: instead of wrapping the knot around main line plus leader, I'd rather make it over main line only. Here's why: the connection between main and leader should be rock solid by the 20 wraps. These last overhand knots and the grinner should only be nessesary for securing the end of the main line. The grinner with main line only is slimmer than your version. It ads a step in diameter between main line and knot. So, the end of the leader is kinda hidden behind the grinner. I'd argue, it makes it easier to go through the top ring while reeling in the line. These kind of knots tend to be pretty stiff, so, it makes a difference. Just some thoughts. I really loved your video!
It's a pr bobin knot without the bobin it's been tested many times and the out come has always been stronger than the fg knot you can find many test video on UA-cam
@pescadorestamora I am a beginner. I tried many knots. In the end I thought the fg knot was the best. But, it is very difficult. But this knot is very useful, it is easy. Anyway, let me try it. shameer, india, kerala
Interesting but I have never had an issue with a 9 wrap blood knot, it passes through even the Daiwa “T-wing” line guides on their baitcasters and I almost always break either the lure connection knot or the leader itself.
Nice alternative, looks indeed like a PR knot but without the knotter. I doubt though that this could be stronger than a well done FG (which can reach up to 90% of the braid strength). Unless of course you have data supporting your claim, then I would agree
sorry if i am wrong, the PR knot is indeed stronger if tied using a bobbin. but if the fg knot is tied correctly as you said it is much stronger. i have proven it when fishing in the sea. the correct fg knot will not slip when used
@ yes the PR tied with a bobbin knotter should be almost 100%, but it has a lot more wraps than the one you made in the video and every wrap is tied with a certain force given by the knotter (which is what makes the difference). I’ve also never had problem with the actual FG so I continue to use it. What I meant when I asked for data was if you checked this knot with a dynamometer, because it’s the only objective way to say how strong a knot actually is (for example a loose PR knot is way inferior to a decent, not even perfect, FG). Other than that, this knot looks quicker and a bit easier than an FG, so could be a very good alternative when tying on a boat
Might be good for ultralight fishing with 2-6lb line where you can't really afford to wrench down on a 2-6b leader line as hard as a FG requires. This one all the tightening seems to be on the braid with no abuse to the leader.
if using light rod i suggest better use Fg knot, in this video i use light rod 3-6lb. with 13lb PE fishing line and 10lb leader line ua-cam.com/video/Q-WuQ4kDpVY/v-deo.htmlsi=UYZbhhgDbQBHSvMA
You can see directly how I tie the rizzuto lock in the video. I always end the rizzuto lock at the end of the Fg, PR and Sc knots. And it never unravels
It's call a PR knot. It wiil slip if it's done with not enough coil over the leader. It takes longer times to tie then a FG knot. If you are on a rocking boat with wind blowing, good luck with that way of tying it. FG is a better and easier to tie and still produces strong connection without slipping.
@@oman-ip6kq I agree with you, this knot takes more time to tie, than tying Fg. after I tried tying it on a rocking boat I threw up 🤢.. I don't recommend this knot if tied without bobbin
Yes Sir I also use this PR knot on my pe8 popping set. But this video without bobbin... I using bobbin for the tightening the bridded winding at leader...
PR. Save yourself some effort & snug your wraps up tight to 1 another as you wrap (say every 10) then wrap them tightly taking your time on the return in the main line direction. Looks pretty good but I will stick with the fg. A tiny dot of super glue on the rizutto finish will lock it.
I like this hibrid knot half Tony Pena and half FG… the only critical part in my opinion is the coconut oil that stays slippery while i would use saliva
That’s a lot when you’re in the field, I want a quick knot and I’ve found the Alberto knot fast and very strong, don’t have time for the fuss of this knot.
I think the FG is easier than this because of the automatic no-look spacing while this is mano mano and depends on sharp focus and steady fingers... Also, I think you pulled or cinched them wrong, aren't you supposed to pull the braided only on the long part (left hand here) and the mono/fluoro (right hand here) on the long part? But then, this video makes the Rizutto finish part much clearer, if I am right about the finish used here, but if I am wrong, I am still saving this video because this is the kind of finish I want cos I can't do the Rizutto properly the way shown from other videos cos my 8x braided was 0.18 and now I ordered 9x and 12x braided 0.16mm 25lbs for big fish and 9x braided 0.12mm 20 lbs for smaller fish ... Also going thinner on Fluoro from 0.4mm to 0.3mm and below... Thank you... I have ran low on braided and fluoro and my orders are arriving in a couple of days and I will use the FG knot when I refill my spool but after the half-hitch part I will use the finish part of this video...
not what you think. i am not laughing at you. i also use alberto but only for light lines. if i use thick lines like 50lb and above i will use Fg or PR 🥂🥂
@@FishingNature87 hehehe, so do you. hopefully get satisfactory results when fishing. but at the beginning of this year I have not fished again to the sea because the weather is still bad in my country
I’m curious as to how this can be stronger than the FG, when it’s essentially the same thing except it’s merely wrapped/overlapped, while the FG is braided by alternating the legs of the braid. I’ll stick with the FG.
Another thing is if you tie the FG right you have no need to tie 100 half hitches after 2 will be plenty, I’ve used the FG for 35 years and never once has it came undone with only 2 half hitches
By the time I’ve tied this knot, everyone else would have already limited out. I use the carrot knot. It’s at least as strong as the FG knot but easier to tie on a rocking boat.
It is a PR knot. Done without the tool. With some dodgy wrapping, more half hitches than you need and a good resutto finish. Takes too long. The school has moved off. But thanks for the show.
Thank you again. this is indeed a PR knot and I made it without a bobbin because I don't have one. So I made it in a simple way and just used my hands 😁
It’s the exact same thing as the FG knot just different way to tie it ! So definitely not stronger than an FG like the guy before my message said because it is the FG!
@@ThatGuy-sw2xethat’s what I’m saying who would wanna do this on a boat yea it can be done but my stuff is always rigged up and ready the night before so I don’t have to waist any time when I get there and I always tie on a good amount so I can wind it on my reel a couple cranks so even if the bottom end breaks I still won’t have re tie the leader knot I just tie back on whatever rig I’m using or switch to.
@@pescadorestamora а можете посоветовать узел для тонких шнуров? типа 0.06 + флюр 0.12 чтобы можно было вязать почти вслепую, внатяг, на весу в ветер с фонарем. что не пробую - все рвется как труха, завязывается один узел из пяти, времени и нервов уходит вагон
The function of the leader line is as a damper when the fish suddenly fights back. The illustration is the same as the use of shock absorbers on motor vehicles. Casting without using a leader line will feel less comfortable, it will feel rough when striking, not smooth.
Main reason people use braid is because it’s way stronger for the diameter of the line itself. Say you have 20Lb mono or Floro you coil use like 40 or 50lb braid for the same diameter of line meaning you get stronger line for less diameter. If you reel holds 250 yards for 20Lb mono test you could have 450 or 500 yards of line if you used a light strength braid say like 30lb braid. Not exact numbers just demonstrating the difference. Another reason people use a Floro leader while having a braid main line is because braid has absolutely no stretch and mono and Floro do have stretch. Also for a shock leader when casting super heavy wait as soon as the braid tightens when casting heavy weight it juts snaps and pops your line. When mono or Floro would give some buffer and strech. And also because Floro line is almost invisible under water.
@@swimpsmagbayao9513 NP another tip when throwing heavy weight and I’m talking like 5ozs and up you need 10ths for every oz thrown for your shock leader and the shock leader needs to have a couple turns into the reel like 6 or 7 turns of line onto your spool and again 10lbs of line for ever 1oz of weight thrown. This is usually done for surf fishing but I also do it when bank fishing for sturgeon on the Columbia river in Oregon and Washington
All of these impractical knots. Like most things there is a point of diminishing returns with these knots. Its like, sure it my be a strong knot, but how long does it take you to tie it and can you tie it on a bass boat in 1.5 foot roller with wind blowing 15 mph? Good luck! Great demonstration video, but no thank you. Im a bass angle, and Im not going to invest 10 minutes in tying a freaking leader knot, and even more time if the conditions are rough.
Thank you for watching and commenting sir. If in the situation as you said, I also would not tie it like this. Maybe I would prefer to tie it with an alberto or yucatan knot which I think is easier and faster. So more precisely to tie I look more at the situation and conditions when going fishing 😁🎣
Why not just tie the leader on at home and tie it to a length where if you loose your rig you still have a nice amount of leader tied on so you can just retie a hook or whatever you use. The knot is strong enough that it shouldn’t break from normal use unless it’s not ties properly and even then I’d bet your line would break off at your hook and jig or whatever you use. I always tie about 6 or 7 feet of leader on. And then tie on whatever rig I’m gonna use. That’s why it’s also called a wind on leader. Not to mention you also get the benefit of having a almost invisible leader line under what’re for them finesse fishing on soft biting fish
You need to get yourself a pair of ridgemonkey braid cutters, they are excellent. Got 2 different pairs of what your using both shite for cutting braid
It's actually a knot you tie prior typically, if you break off you've learnt to tie it in a way that doesn't teach others. Otherwise, you're right a basic knot might take you 8 minutes, who am I to judge your abilities.
Still FG knot but done by each side. It takes more time than normal FG knot. Imagine when you have to do it at the fishing site .... do it then you will see the difference.
Great knot. Have to try it.
You must try it 😁👋
Great tutorials on fg knots and variations. Thanks
You're welcome
Wow, great turtorial mate!! Thanks for sharing!! 🤜🏼🤛🏼🎣💪🏼🎣
You're welcome.
Thanks for watching ☺
C du solide c sur mais, honnêtement je suis pas fan bcp trop long quand t au bord de l'eau !!!
@@davids1314 alors vous pouvez utiliser un nœud de pêche plus rapide. Comme le nœud Alberto ou Yucatan
Superb ! I really enjoy doing a FG knot following the Ultimate channel technique, but I will enjoy this one too !
Thank you, friend ☺
Great tutorial, very easy to follow.
Thank you and good luck
Good video. Nicely filmed all in close up so you can see exactly what’s being done.
Thank you 🙏
Great tutorial - thank you 👍
You're welcome
This looks so much easier than the regular FG. This will be the way I tie it from now on.
☺
It can't be stronger than the FG knot, because it's a FG knot ! Just the technique is different. Thanks for sharing it.
You're welcome, actually this is a PR knot, but made without using a bobbin
thank you, please tell me what kind of concept I should review
@@pescadorestamoraI was going to say this is a PR knot. I use an FG on most of my rigs except my heavy jigging set where I use 80lb braid and 100lb leader - this is when I use the PR knot.
@@snappyvalleyfishing Tell me bro, so what type of knot do you think this is? 😁🙏
@@pescadorestamora I would say it is a PR knot. Typically though, a PR would have 30 winds. (IMHO). Like I say, I only use this on my heavy jjgging set up.
Most of my fishing is for bass, so forgive me for asking a question related to scaling down the line size. Although I typically tie an FG, my question applies to both the PR and the FG. In order to make the knot smoother when reeling through guides, level winds, and to prevent the knot from “catching” other coils of line on the reel when casting, I typically tighten the main knot after one or two half hitches, add another 5-10 half hitches over both mainline and leader, then trim the leader and apply the Rizutto on the braid only. I can't think of any reason this would result in a weaker knot, but I'm curious if you think it might. Thanks.
sir, the knot as you said, putting Rizzuto on the braided line will not make it weak and the knot will make your line smoother. Please correct me if I'm wrong sir 🙏
I like cutting off leader before the rizzuto because it then covers that leader and feels like a smoother transition through eyelets. And a dab of super glue because you can have the sharpest scissors on the planet and your braid will still manage to want to fray when cutting lol. Beautiful looking knot.
Thank u for the advice 😁🙏
@ just things I pick up on others comments as well that seem to work better for me. Made it look easy.
And from the other comments I also learned, that actually fg is easier and more powerful than PR without bobbin 😅
@@pescadorestamora ya the fg is absolutely THE BEST.
@@sirob584 I agree with u 😁
Looks somewhat easier then the FG with all the wrapping around your fingers, standing on the line etc. Same result a good knot just seems a little easier
Thanks
if you use a bobbin to weave into the leader line, this knot will be much easier 😁
Cheers buddy!
😁🎣🎣
Great tutorial, thank you. Sometimes my FGs slip off the Fluoro when I tightened so I am going to try this one.
You're welcome, then you should try this knot
I am going to start listening to this music when i am rigging. Very soothing
Wow, this music is very calming, isn't it?
I like this knot buddy
Me too 😁
PR knot tied without a bobbin. Great knot for just about everything that swims.
You have to try it buddy
@@pescadorestamora yep it is a good knot. It takes a bit longer to master without the bobbin.
@@Sam-xn7zp good luck ☺
100% PR Knot rocks!
@FluidFishingmedia indeed, this is a PR knot without a bobbin
Sir, is this the strongest braid to leader knot for you?
@@bektasierenonur5538 not really, i use fg more often for thick lines. alberto and yucatan for light lines
A hybrid between tony pena/ hand wrapped PR and alternating half hitches withe the rizzuto finish. Surely a very good knot in my opinion
try it bro
@@pescadorestamora I don't think I will, FG works fine for me
😁👍
Thank you for the good technique.+1
You're welcome, good luck
Can this be used to tie two different thicknesses of braid like thicker braided leader to thinner main line braid??
I hesitate to say, because I've never tried it. But I recommend that you use the Alberto knot to make braid-to-braid braids and I have used the Alberto knot and the results are good. Next video I will make a tutorial
@@pescadorestamora So the Alberto knot is the strongerst braid to braid connection?? What about the slim beauty??
@@gavinlangford2984 I only recommend alberto, because I use it. As for fineness, I think it can be used for UL 6-15lbs fishing rods
Yes the PR knot is very effective for joining braid of different thicknesses. This knot is known as the PR knot and is indeed stronger than the FG knot. It is usually tied with a special bobbin.
Agreed, but if you don't have a bobbin, a PR knot can also be made without a bobbin
Alberto or Albright, but without doubling over the leader. Interesting.
This is a PR knot and not an albright or alberto 😊
I know this knot is amazing! And I love the art of it. But I can confidently say, I will never take the time it takes to make this lol. I’d do all that and then just get snapped off by a barracuda or get snagged and be pissed. 😂😂
Because it takes longer to make than alberto knot
nice❤
@@k.r.f.c2295 thank u 🍻
Good for heavy lines☝️👌💪... imposible for Ul- light set up...
that's right, for light lines I suggest just using the alberto knot
Nice job!
Thank you
Great knot, will give this a go. Question, When you go back 20 wraps, is it essential you stay right inbetween the previous made wraps or is it ok if some overlap the braid from the first 20 wraps? Ta
It should be possible, because in the last 20 wraps after you finish with the first lock, you will pull it into a smooth braid like I did in the video. but if you repeatedly overlap the nodes, it will make it difficult for you to pull out the first lock. hope it can be understood 🙏
Nice looking knot. If I had any criticism, it would be to invest in a good pair of line clippers. Thank you for this. 🙂
Thank you, I have changed the scissors to make it easier for me. Thank you again, sir.
Some humble thoughts...
1) I'd say the strengh should be the same a the fg knot. Based on the physics, both knots use to take a bite into the leader.
2) Because the fg is bound with both ends of the main line from the same side instead of coming from one side, turning and wrapping back, the bite into the leader might be even better than your version? But... with 20 wraps it shouldn't matter any more. ;-)
3) The last knot (a grinner?), I'd make it a little bit different. Here's how: instead of wrapping the knot around main line plus leader, I'd rather make it over main line only. Here's why: the connection between main and leader should be rock solid by the 20 wraps. These last overhand knots and the grinner should only be nessesary for securing the end of the main line. The grinner with main line only is slimmer than your version. It ads a step in diameter between main line and knot. So, the end of the leader is kinda hidden behind the grinner. I'd argue, it makes it easier to go through the top ring while reeling in the line. These kind of knots tend to be pretty stiff, so, it makes a difference.
Just some thoughts.
I really loved your video!
Thank you my friend, your explanation is very helpful for me
This is new to me. What tests were done to show it is stronger than FG? Just curious. Thanks
The leader line grips more firmly than the main line
It's a pr bobin knot without the bobin it's been tested many times and the out come has always been stronger than the fg knot you can find many test video on UA-cam
This guy knows something about archery 😊 That's how we end the so called string servings.
try this knot, it takes too long to tie it without a bobbin
Super 😊
Knot name??
PR knot without bobbin
@pescadorestamora I am a beginner. I tried many knots. In the end I thought the fg knot was the best. But, it is very difficult. But this knot is very useful, it is easy. Anyway, let me try it. shameer, india, kerala
@@shameersarosh2315 after i used this knot several times for ocean fishing. Fg is still the best.
Interesting but I have never had an issue with a 9 wrap blood knot, it passes through even the Daiwa “T-wing” line guides on their baitcasters and I almost always break either the lure connection knot or the leader itself.
thanks for the information, next time maybe i will try a blood knot like you said
But won’t work on lines with different diameters. Blood knot is great for equal diameter lines tho
Hello mate, so What iş the name of that knot?
This is a PR knot, but in a tie without the use of a bobbin
Nice alternative, looks indeed like a PR knot but without the knotter. I doubt though that this could be stronger than a well done FG (which can reach up to 90% of the braid strength). Unless of course you have data supporting your claim, then I would agree
sorry if i am wrong, the PR knot is indeed stronger if tied using a bobbin. but if the fg knot is tied correctly as you said it is much stronger. i have proven it when fishing in the sea. the correct fg knot will not slip when used
@ yes the PR tied with a bobbin knotter should be almost 100%, but it has a lot more wraps than the one you made in the video and every wrap is tied with a certain force given by the knotter (which is what makes the difference). I’ve also never had problem with the actual FG so I continue to use it.
What I meant when I asked for data was if you checked this knot with a dynamometer, because it’s the only objective way to say how strong a knot actually is (for example a loose PR knot is way inferior to a decent, not even perfect, FG). Other than that, this knot looks quicker and a bit easier than an FG, so could be a very good alternative when tying on a boat
Might be good for ultralight fishing with 2-6lb line where you can't really afford to wrench down on a 2-6b leader line as hard as a FG requires. This one all the tightening seems to be on the braid with no abuse to the leader.
And after testing it turns out that Fg is better than this knot
@@pescadorestamora would you say better for ultralight fishing as well? 2-6lb?
if using light rod i suggest better use Fg knot, in this video i use light rod 3-6lb. with 13lb PE fishing line and 10lb leader line
ua-cam.com/video/Q-WuQ4kDpVY/v-deo.htmlsi=UYZbhhgDbQBHSvMA
Anyone know how this would compare to a PR done with a bobbin with that extra tension?
obviously stronger if tied with a bobbin
How do you guys lock your rizzuto? My rizzuto always starts to unravel after a few casts.
You can see directly how I tie the rizzuto lock in the video. I always end the rizzuto lock at the end of the Fg, PR and Sc knots.
And it never unravels
It's call a PR knot. It wiil slip if it's done with not enough coil over the leader. It takes longer times to tie then a FG knot. If you are on a rocking boat with wind blowing, good luck with that way of tying it. FG is a better and easier to tie and still produces strong connection without slipping.
@@oman-ip6kq I agree with you, this knot takes more time to tie, than tying Fg. after I tried tying it on a rocking boat I threw up 🤢.. I don't recommend this knot if tied without bobbin
PR knot done without a bobbin. PR>FG nice video
Thank you.
you can also see the PR knot using a sinker
Yes Sir
I also use this PR knot on my pe8 popping set. But this video without bobbin... I using bobbin for the tightening the bridded winding at leader...
The best
PR. Save yourself some effort & snug your wraps up tight to 1 another as you wrap (say every 10) then wrap them tightly taking your time on the return in the main line direction. Looks pretty good but I will stick with the fg. A tiny dot of super glue on the rizutto finish will lock it.
And I always use the Fg knot as well
Love to see a connection knot for mono to fluoro other than the surgeon knot. Thx.
😁👍
I like this hibrid knot half Tony Pena and half FG… the only critical part in my opinion is the coconut oil that stays slippery while i would use saliva
And when sailing, I also use saliva to moisten the knot 😅
That’s a lot when you’re in the field, I want a quick knot and I’ve found the Alberto knot fast and very strong, don’t have time for the fuss of this knot.
alberto is really fast and strong, i agree with you
👍good nice
😊👍
I think the FG is easier than this because of the automatic no-look spacing while this is mano mano and depends on sharp focus and steady fingers... Also, I think you pulled or cinched them wrong, aren't you supposed to pull the braided only on the long part (left hand here) and the mono/fluoro (right hand here) on the long part?
But then, this video makes the Rizutto finish part much clearer, if I am right about the finish used here, but if I am wrong, I am still saving this video because this is the kind of finish I want cos I can't do the Rizutto properly the way shown from other videos cos my 8x braided was 0.18 and now I ordered 9x and 12x braided 0.16mm 25lbs for big fish and 9x braided 0.12mm 20 lbs for smaller fish ... Also going thinner on Fluoro from 0.4mm to 0.3mm and below...
Thank you... I have ran low on braided and fluoro and my orders are arriving in a couple of days and I will use the FG knot when I refill my spool but after the half-hitch part I will use the finish part of this video...
thanks for your review. and i agree that Fg knot is easier than PR knot without bobbin. and maybe there is something wrong when i do the pulling
By the time you are done with that I would have already caught two fish with the Alberto knot
🤣
@ thought you might laugh at that 😂 I’m about quick action
not what you think. i am not laughing at you. i also use alberto but only for light lines. if i use thick lines like 50lb and above i will use Fg or PR 🥂🥂
@ Yup I only use light tackle . Had to hit ya with ya good joke 👍 Good luck out there fishing . Hope you catch some giants this year .
@@FishingNature87 hehehe, so do you. hopefully get satisfactory results when fishing. but at the beginning of this year I have not fished again to the sea because the weather is still bad in my country
Top demais amigo
você deveria tentar amigo
Effectively tied an FG knot with 20 loose wraps
👍👍
that is a pr bobbin knot W/O the bobbin and less wraps.. so i doubt it will hold more than a well done fg
@@gabrielduarte3904 👍👍
salam hadir dari indonesia kepulauan aru maluku
Salam juga bosku ☺
@@pescadorestamora terimkasi senior ilmunya untuk memperbaiki kesalahan saya sering nyangkut di ringnya ternya gini caranya mantap sekali senior
Ive used one fg knot for a month until i ran out of leader.. this cant compare 😅
😅
طريقة جيدة لأننا نتفادى بها راس النايلون المعكوس الذي يرتطم مع الحلقات عند الرمي. شكرا
You're welcome ☺
By the time you finish this knot i already threw 3 fish next to you 😂 just joking!
Hi, happy fishing 🤣🤣
I’m curious as to how this can be stronger than the FG, when it’s essentially the same thing except it’s merely wrapped/overlapped, while the FG is braided by alternating the legs of the braid. I’ll stick with the FG.
😁👍
I only use peanut oil for my knots.
👍
Rizzuto ตกปลาบ่อยๆ เงื่อนมันคลายออก มีวิธีแก้ไขไหมครับ
You should add a half hitch a few twists, then pull to tighten the braid, and finally finish with Rizzuto. this way the knot won't slip
Cant see how as its a PR bobbin knot without the bobbin. But that knot gets its strength from the bobbin tension which this doesn't have🤔
@@88mattyg I tighten the leader line, then weave the main line tightly from start to finish.
You say it is stronger than the FG. Just wondering have you actually tested the knot on a machine to validate that? Looks much easier to tie.
I didn't test it through the machine, just did a manual withdrawal 😅
Tuna Knot?
PR knot
Can yah make a video for light leader line like 2-6lb?
All theses type of knots like these will snap needing to pull soo hard to synch..
If you tie it properly with a knot like this, it won't slip. I myself use it for a 3-6lb fishing rod.
It doesn’t slip. The line itself snaps when pulling to make it tight.
sorry, I just understood what you said. what you mean is, let me try making a video with a 2-6lb leader line, is that correct?
Yes please 😊
Next video 👍
Knot stronger than the FG knot!
Yes, this is a PR knot
Thanks bro.... I can try this knot 🙏🙏🙏
You're welcome, and good luck
It really look sp strong
It's really strong, sir, I've tried it
Nightmare knot😮
😅
So an FG with coconut oil?
I don't use oil for the FG nodes. But for the PR knot I use it to be smoother when pulling the braid
Another thing is if you tie the FG right you have no need to tie 100 half hitches after 2 will be plenty, I’ve used the FG for 35 years and never once has it came undone with only 2 half hitches
👍
Keren bang
😁👍
By the time I’ve tied this knot, everyone else would have already limited out. I use the carrot knot. It’s at least as strong as the FG knot but easier to tie on a rocking boat.
Thanks for the advice
No coconut oil ty...
That's right, just using saliva will do the trick
I still prefer the blood knot, easier n no need so much turns
@@JeromeLim13 thank you, the blood knot is also strong and easy. I agree
It is a PR knot. Done without the tool. With some dodgy wrapping, more half hitches than you need and a good resutto finish. Takes too long. The school has moved off. But thanks for the show.
Thank you again.
this is indeed a PR knot and I made it without a bobbin because I don't have one. So I made it in a simple way and just used my hands 😁
What idiot starts tying on his leader when the fish arrive? Do it on shore and be ready.
SC knot process
Many say this is a PR knot
@@pescadorestamora exactly.. a pr knot master..
True, you should try this one knot
💯
@@JansenFishing 🍻🍻
👍🏻👍🏻👍🏻very good 🙏🏻🙏🏻มารับชมเติมกำลังใจ❤ +1 ❤ให้กันครับ😊
Thank u ☺
By the time I'm done with this knot tide has done a full cycle
😅
@@pescadorestamora it looks like a very strong knot tho and streamlined too. I might try it one day, might.
@@BladeIntoOblivion please try it bro 👍
Soooo it’s basically a PR Bobbin knot…..without using a bobbin 😂
That's right 🤭
It's so strong and huge, it won't pass easily through the guides.
Use a small fishing line size
It’s the exact same thing as the FG knot just different way to tie it ! So definitely not stronger than an FG like the guy before my message said because it is the FG!
😁
Midnight knot
👍
Imagine wasting 10 minutes to tie a knot on a charter boat, rocking back and forth while the fishing is hot? Yeah, gimme a swivel hommie.
😅
😅👍
Do it right before you leave and you won’t have to do it again on the boat.
@@ThatGuy-sw2xethat’s what I’m saying who would wanna do this on a boat yea it can be done but my stuff is always rigged up and ready the night before so I don’t have to waist any time when I get there and I always tie on a good amount so I can wind it on my reel a couple cranks so even if the bottom end breaks I still won’t have re tie the leader knot I just tie back on whatever rig I’m using or switch to.
где-то спряталась третья рука, которая держит моно справа
не руки, а ноги. Я завязала моно на большом пальце, чтобы было легче заворачивать.
@@pescadorestamora а можете посоветовать узел для тонких шнуров? типа 0.06 + флюр 0.12
чтобы можно было вязать почти вслепую, внатяг, на весу в ветер с фонарем.
что не пробую - все рвется как труха, завязывается один узел из пяти, времени и нервов уходит вагон
@@michaelemelyanov5199 с тонкой леской того размера, который вы сказали, я всегда использую узел Альберто или Юкатан.
👏👏
👋👋
PR & FG knot are completely different, PR knot is the strongest of all knots, especially suitable for big game fishing, not for 5 minutes bass game.
I think with the overlapping weave on the PR knot it becomes a strong gripping knot on the leader line. that's what makes the PR knot strong
ua-cam.com/video/teTyMUPKZ7k/v-deo.htmlsi=ycNlogmr_d7ZKX2v
Are you sure? I always lock the beast in and don't let it escape
@@bbbbb55555 I'm confused by what you said
Who is tying this when you have to tie a new leader and it the wind is blowing? Uni to uni is WAY easier for line that thin, and WAY quicker.
for thin fishing line I agree with you. but for heavy ropes how could you use a double uni knot. it will definitely get caught on the top ring
A shorter leader so it doesn’t go into the guides. Most of the time, you don’t need more than three feet.
@MrSpeedyNYC thanks for the suggestion
buy a bobinknot asist von shimano make it more faster stronger and easier...
I do not have the funds to purchase it 😅.. So I am using whatever I have
There is no way this is stronger than an FG knot. Countless break tests have been done comparing this and an fg knot and the fg always wins. Always.
That is true 😅
So what's the point of using braided line if you just going to tie a fluorocarbon to it I mean it's just not making any sense to me
The function of the leader line is as a damper when the fish suddenly fights back. The illustration is the same as the use of shock absorbers on motor vehicles. Casting without using a leader line will feel less comfortable, it will feel rough when striking, not smooth.
Main reason people use braid is because it’s way stronger for the diameter of the line itself. Say you have 20Lb mono or Floro you coil use like 40 or 50lb braid for the same diameter of line meaning you get stronger line for less diameter. If you reel holds 250 yards for 20Lb mono test you could have 450 or 500 yards of line if you used a light strength braid say like 30lb braid. Not exact numbers just demonstrating the difference. Another reason people use a Floro leader while having a braid main line is because braid has absolutely no stretch and mono and Floro do have stretch. Also for a shock leader when casting super heavy wait as soon as the braid tightens when casting heavy weight it juts snaps and pops your line. When mono or Floro would give some buffer and strech. And also because Floro line is almost invisible under water.
@@sigspearthumb1056 wow okay that's a great response I'll buy that I just retired and getting into fishing thanks for the info
@@swimpsmagbayao9513 NP another tip when throwing heavy weight and I’m talking like 5ozs and up you need 10ths for every oz thrown for your shock leader and the shock leader needs to have a couple turns into the reel like 6 or 7 turns of line onto your spool and again 10lbs of line for ever 1oz of weight thrown. This is usually done for surf fishing but I also do it when bank fishing for sturgeon on the Columbia river in Oregon and Washington
😂😂😂because you have no idea buddy😂
All of these impractical knots. Like most things there is a point of diminishing returns with these knots. Its like, sure it my be a strong knot, but how long does it take you to tie it and can you tie it on a bass boat in 1.5 foot roller with wind blowing 15 mph? Good luck! Great demonstration video, but no thank you. Im a bass angle, and Im not going to invest 10 minutes in tying a freaking leader knot, and even more time if the conditions are rough.
Thank you for watching and commenting sir. If in the situation as you said, I also would not tie it like this. Maybe I would prefer to tie it with an alberto or yucatan knot which I think is easier and faster. So more precisely to tie I look more at the situation and conditions when going fishing 😁🎣
Why not just tie the leader on at home and tie it to a length where if you loose your rig you still have a nice amount of leader tied on so you can just retie a hook or whatever you use. The knot is strong enough that it shouldn’t break from normal use unless it’s not ties properly and even then I’d bet your line would break off at your hook and jig or whatever you use. I always tie about 6 or 7 feet of leader on. And then tie on whatever rig I’m gonna use. That’s why it’s also called a wind on leader. Not to mention you also get the benefit of having a almost invisible leader line under what’re for them finesse fishing on soft biting fish
Fg for me tie a fg inside a few minutes
👍
any knot is strong if u do it correctly
Thank you for your advice, sir.
This is definitely an FG-Knot. But the technique of the cross-winding at the beginning of the knot is interesting. Thanks for it !
You're welcome
It looks like PR knot without use of the tool.
Yes, this is a PR knot
Well done
You can also see the video on making PR knots using sinkers on my channel
Awesome, I'll check it out. Thanks
Thank you and nice to meet you. May you always be filled with happiness
But we'll done
👍
You need to get yourself a pair of ridgemonkey braid cutters, they are excellent.
Got 2 different pairs of what your using both shite for cutting braid
Maybe in the future I will buy it
i ain’t got time for an 8 minute knot
It only takes 1 minute to tie this knot, if indeed really tie it
It's actually a knot you tie prior typically, if you break off you've learnt to tie it in a way that doesn't teach others. Otherwise, you're right a basic knot might take you 8 minutes, who am I to judge your abilities.
It's a bit ridiculous. I don't have ten minutes to make a knot. I'm sticking with the Carrot knot.
😅
Get yourself some sharp scissors
OK sir, I have sharpened these scissors to be sharper
Knot starts ten minutes in
@@TheBabyskywalker 😅
Still FG knot but done by each side. It takes more time than normal FG knot. Imagine when you have to do it at the fishing site .... do it then you will see the difference.
Most people say this is a PR knot without a bobbin
Shoot, I can't imagine tying a FG out on the boat. I can tie the FG. Not a pro but I can tie one.
There's an easier way to tie the Fg, you can tie a braided line to knob reel. You can find it on my channel 🙏
Or you could do what like everyone else does and tie up the night before so you don’t have waist time when you get out on the water.
You must have hands of steel.
My sissy hands would be cut to pieces.
I wear gloves. 😂
You should really use gloves, friend
☺🍻🍻
It takes too long to tie The FG knot is easer
Thank u 👍