Tied the Alberto backwards, ALMOST always your mono/flouro is thicker than your braid. Wrap braid around mono!!!! IMPORTANT that the wrapping line exits the "loop" to the same side it entered. For offshore we tie a lot of 40 or 50lb flouro to 30lb braid. Could you imagine trying to wrap 40 lb flouro around braid?? Good luck with that!
I do this one immediately... In my life I always do the double albright knot with satisfaction and a minimal mistakes on a spinning fishing session... but this one appear more accurated and even with a small diameters such as in an eging braid and mono is easy to see every turn of the lines. Thanks a lot 👍🏻
Looks like a great knot but the albright seems a lot quicker and easier. I also feel wrapping the braid around the mono makes the knot stronger and gives it a lower profile.
@@stevensands33 Mono has higher abrasion resistance than braid because it's a single filament. Since braid is woven from many individual fibers once a few of them are compromised there's more and more stress on the remaining fibers and they just give out. In the case of leader knots you want the mono on the outside taking the hits against the guides unless it's much, much thicker than the braid.
@@pizzarat3275 ok but performance wise braid out performs mono in these scenarios still. I’ll take a few frayed brands of braid over fresh mono in any situation. If you guys are talking about giant mono for saltwater fish then I guess it wouldn’t matter. I’m taking light lines.
Iv done it your way and my tag end tends to point up and away from the reel causing the tag to wrap around my guides. was thinking maybe this would make the tag point towards my reel so if it duz snag it will snag on when i reel in which would be more manageable. Right?
Great knot but would never put a flame near my line. If you look closely You can see the melting of the mono/ flouro at the knot. It’s unnecessary and can only weaken the line. Especially if you are bouncing on the waves. Your method looks simple and quick other than the fire. Thank you I’m going to try it
Smaller the knot the better! May be fine with bigger pole eyelets but for me FG is the bomb and double uni are my go tools but I like to learn new things...nice video
FG is great! Like the Bimini Twist really lost its popularity due to its level of complexity. Complexity in general leads to error. Great knot lots of practice. 3:51
I would never use a double uni. The Albero knot is easier to tie, smaller, and twice as strong I use is on all lines that are about the same diameter, To tie heavy leader to braid the FG is the ONLY way to go.
Once I learned the FG there’s no going back, except for a quick tie-on when I’m in an awkward position, then I’ll use the improved Albright. Nothing beats the low profile and strength of the FG, especially when you’re using line of any thickness
@forrhs8430 I can't disagree with you. I have been using it for the last 4 years. I sat at home for the better part of a year watching the BASS live events and the MLF live events on the TV/phone and tied the knot with line I was planning on donating until I felt I had it down to where I could fish it in a tournament. It was taking about 2 to 3 minutes to tie it aside from the fact that it would take two or three tries before it actually worked. Now, it takes about 30 seconds, and it won't affect my fishing.
knots such as this are not so easy to do on the bank or in the boat with the wind howling into your face, for this reason I find that a simple 6 wrap surgeons knot is much easier to do when I am attaching my fluorocarbon leader to my braid
I needed to learn how to tie a leader to braid and just started trying things and this is what i eventually came up with except i double up both lines. Glad i know what its called now
Yeah Ill stick with the Alberto. Been using it for over a decade with out a problem. Its simple, fast, and hard to get wrong. It may not be the strongest knot but Im fishing for bass, not Atlantic blue marlin. Try tying this knot or knots like the FG on a windy day on a pitching bass boat in foot rollers. Good luck!
I use that knot and I’ve had huge black tip sharks and it’s never ever once broke off always breaks off at my snap snivel. Even if I get snagged on the reef it’s never has broken off
fg is the strongest knot you can tie without a bobbin and the only leader to braid knot i would ever use. most people won't need it. alberto is a northeast surfcaster and he needed something he can tie out on a rock at night when the waves are breaking around you. as far as i know he's caught more 50 lb stripers from shore than any man alive.
This is a great knot I have used for 10 years. You need to tie the braid in a loop with a knot and do a half granny knot on the leader. If these steps aren’t done your knot won’t be as strong. I’ve spent many hours testing knots to prove it.
This is the best lead feeds smooth casting barely can tell switch I'm just beginning but as all beginners learning a whole lot about knots looking forward to much more tips and ??? WWay CCool thanks
Seems like a modified becket bend or sheet bend knot. The only difference is instead of wrapping the smaller diameter line around the bite of bigger diameter once, you did it many times and then retraced it and THEN put it back through the loop. Very interesting I'll definitely be using this from now on
Thankyou I was always breaking off now that I know the correct way I will be ok thanks man I'm going to use that connection of lines when needed appreciate you thanks
this is easy to tie and very narrow for connecting lines /leaders to run smooth through fishing rod guides .. but what about overall knot strength in comparison and which material line first? the fluro or the braid for step one?.. like this knot!
So many knot vids.....many are similar in nature & look effective. My only problem with braided(20lb) main to fluorocarbon(~8lb) leader....these smaller diameter lines are IMO more difficult to tie with some of these videos....if not the double uni...it's a swivel which also prevents line twist for the win.
The proper Alberto is knot is my favorite knot. I use it every time I fish. If I free line it’s the Alberto knot 100% of the time. Super strong and easy on the guides.
This looks like an Alberto knot to me just wrapping the flouro around the braid instead of the other way around, Doesn't look like a good knot to me but I will test is and see if it is worth using.
I only use this knot on light tackle for bait fishing or small fish or in some cases where my gear is very heavy and overkill for the drag requirements it’s impact strength is not that great and it can slip if too few turns are used! I use my own modified fg or Bimini then to this knot or another similar that was taught to me by Phil Atkinson and he called it the tony Jones leader knot
I tied this knot the other night with the line still on spools. I wet it, cinched it down, and proceeded to pull. It only took about 10# of force for the knot to slip and come untied.
узел морковка обычно прри вязании плетеным шнуром идет обмотка вокруг флурокармоного шоклидера. У вас наоборот обкручиваете флурокарбоном вокруг плетеногошнура.
Yeah I’m gonna pack gloves and put them on every time I want to tie on a leader. I use Albright knot, no gloves, 60 seconds and I’m fishing and haven’t had a failure in 20 plus years.
A nice-looking knot, but, in my opinion, a hybridisation of the Yucatan and Carrot Knot. The true Carrot Knot goes by several different names - Carrot Knot, Bullet Knot, Mahin Leader Knot, and always starts with an Overhead Knot (Granny Knot) usually on the leader line. Once completed, you have a knot with all the tag ends at the back of the knot and all the wraps at the front of the knot forming a close approximation to a 'carrot' or 'bullet' from which it derives its name. Normally, the main line, like braid, will be thinner than the leader line material, so it makes sense to make the overhead knot on the thicker material. But should your main line be thicker than your leader line - say 20 lbs main line to 12 lbs fluoro, you are better off making the overhead knot on the main line and using the thinner leader line to make the wraps. It will be just as strong, but not as stream-lines since your wraps will now be facing inwards towards the reel rather than outwards in the direction of cast.
Great demo except it would be better if you lubed up the line before you start pulling on the lines! Will help prevent burning the mono from the friction.
Simple knots work fine for inshore fishing. Its about teeth and abrasion. Surgeons knot works fine tied in 10 seconds. Then I use FC with a renzetti finish for light freshwater.
Thanks! this is a handy one, fresh or salt water.
can be applied in both places
@@FishingknotsChannel ❤❤❤❤❤❤❤😊
I did this knot while fishing in the morning on my kayak, by the time i finished i had unknowingly floated 900 miles out to sea
😂😂👌
🤠😆👍
Figured that happened with an FG.
😂😂😂😂😂😂😂
Tied the Alberto backwards, ALMOST always your mono/flouro is thicker than your braid. Wrap braid around mono!!!! IMPORTANT that the wrapping line exits the "loop" to the same side it entered. For offshore we tie a lot of 40 or 50lb flouro to 30lb braid. Could you imagine trying to wrap 40 lb flouro around braid?? Good luck with that!
A great piece of advice.
Yeah man I wouldn't want that fat chunk of fluoro blasting thru my guides
Pass the tag end through the loop opposite direction it first entered and ya got the Albright
I thought the exact same thing!
Crazy Alberto is my go-to knot.
I have used this Carrot knot in conjunction with the Bimini Twist for over 50 years, and never had a fail !.
I'd love to know more about the process on that. Could you explain in more detail what it looks like from braid to bumper fluoro? 👍🏻
Good knot. Not sure but I believe it's called the Alberto knot.
Yes it’s albernot
Alberto is braid wrapped around Mono , this is mono around braid .... Yeah cool but thicker than the original
I do this one immediately...
In my life I always do the double albright knot with satisfaction and a minimal mistakes on a spinning fishing session... but this one appear more accurated and even with a small diameters such as in an eging braid and mono is easy to see every turn of the lines.
Thanks a lot 👍🏻
This knot looks easier for my old arthritis fingers 😊
Looks like a great knot but the albright seems a lot quicker and easier. I also feel wrapping the braid around the mono makes the knot stronger and gives it a lower profile.
On top of that the braid protects the leader through the guides. If an albright breaks it was tied extremely wrong.
@@stevensands33 What drugs are you smoking son?
Mono is far more abrassive resistant than braid.
@@CHOPERUS23 lol what? Mono is much weaker than braid. There isn’t really much else to say.
@@stevensands33 Mono has higher abrasion resistance than braid because it's a single filament. Since braid is woven from many individual fibers once a few of them are compromised there's more and more stress on the remaining fibers and they just give out. In the case of leader knots you want the mono on the outside taking the hits against the guides unless it's much, much thicker than the braid.
@@pizzarat3275 ok but performance wise braid out performs mono in these scenarios still. I’ll take a few frayed brands of braid over fresh mono in any situation. If you guys are talking about giant mono for saltwater fish then I guess it wouldn’t matter. I’m taking light lines.
Thanks!
All backwards. Braid around mono or floro. And top of carrot goes towards reel. So you can cast without getting hung up.
Iv done it your way and my tag end tends to point up and away from the reel causing the tag to wrap around my guides. was thinking maybe this would make the tag point towards my reel so if it duz snag it will snag on when i reel in which would be more manageable. Right?
Great knot but would never put a flame near my line. If you look closely You can see the melting of the mono/ flouro at the knot. It’s unnecessary and can only weaken the line. Especially if you are bouncing on the waves. Your method looks simple and quick other than the fire. Thank you I’m going to try it
Mushrooms are necessary on lots of knots. If you wet the line and use your nails to gaurd the knot it is completely fine.
Exactly!!!! It's perfectly safe and better too! A little caution and you good!@@badm.d
This is the Albright knot in reverse. Instead of wrapping the braid around the mono, you wrap the mono around the braid. Brilliant!
The Albright does not wrap over itself like this one does. You may be thinking of the Alberto and not Albright
The Albright we use to tie our top shot for cod fishing. We like to call it the baccala knot.😊
Albright Is better for heavier monofilament
Carrot = Alberto….Great knot! When casting jigs for walleye my trilene knot at the jig will fail on snags and the Alberto never lets go.
Awesome now I am done with fg knot thank God 💚💚💚💚💚
Smaller the knot the better! May be fine with bigger pole eyelets but for me FG is the bomb and double uni are my go tools but I like to learn new things...nice video
FG is great! Like the Bimini Twist really lost its popularity due to its level of complexity. Complexity in general leads to error. Great knot lots of practice. 3:51
I would never use a double uni. The Albero knot is easier to tie, smaller, and twice as strong I use is on all lines that are about the same diameter, To tie heavy leader to braid the FG is the ONLY way to go.
Braid should wrap around the leader as it will go through the rings better and the reel
You need to do it in reverse like the Alberto Knot. The tag end doesn’t catch on the eyes when casting. Wrap the braid around the fluorocarbon.
I usually wrap the braid around the mono,don’t know which is stronger but works well.
Would be slimmer too?
Braid around mono is better. Braid digs into mono and the knot will be skinnier.
Perfeição !!!!!! Top !!!!
I like the double uni knot.
Я пользовался узлом Олбрайт до того, как узнал про узел Морковка.
Морковка получатся тоньше и надежнее, узел Олбрайт у меня нередко распускался.
A allegory for “there’s a right way to do things and a wrong way to do things”.
-reverse Alberto Knot, you can see the damage line on the left.
Awesome and super easy to tie !!! I'll be trying it next trip out, next week! TYVM!!!
Wow, that is quick knot to tie. I will remember this when I need to rigged up quick.
Without even talking, dude is able to teach us how to tie these knots. Thank you so much for your content.
Sama kuatnya FG knot, tp ini lebih mudah
I like the knot for sure looks simple enough to tile. I will play with it but the FG knot is still my go to.
Once I learned the FG there’s no going back, except for a quick tie-on when I’m in an awkward position, then I’ll use the improved Albright. Nothing beats the low profile and strength of the FG, especially when you’re using line of any thickness
But the FG knot is so damm cumbersome to tie
@forrhs8430 I can't disagree with you. I have been using it for the last 4 years. I sat at home for the better part of a year watching the BASS live events and the MLF live events on the TV/phone and tied the knot with line I was planning on donating until I felt I had it down to where I could fish it in a tournament. It was taking about 2 to 3 minutes to tie it aside from the fact that it would take two or three tries before it actually worked. Now, it takes about 30 seconds, and it won't affect my fishing.
the best braid to nylon i have ever seen. Thank you
Check the Albright knot out then it's even easier to tie.
thank you, the fishing knot is very good and easy to apply
knots such as this are not so easy to do on the bank or in the boat with the wind howling into your face, for this reason I find that a simple 6 wrap surgeons knot is much easier to do when I am attaching my fluorocarbon leader to my braid
I needed to learn how to tie a leader to braid and just started trying things and this is what i eventually came up with except i double up both lines. Glad i know what its called now
Yeah Ill stick with the Alberto. Been using it for over a decade with out a problem. Its simple, fast, and hard to get wrong. It may not be the strongest knot but Im fishing for bass, not Atlantic blue marlin. Try tying this knot or knots like the FG on a windy day on a pitching bass boat in foot rollers. Good luck!
I use that knot and I’ve had huge black tip sharks and it’s never ever once broke off always breaks off at my snap snivel. Even if I get snagged on the reef it’s never has broken off
fg is the strongest knot you can tie without a bobbin and the only leader to braid knot i would ever use. most people won't need it. alberto is a northeast surfcaster and he needed something he can tie out on a rock at night when the waves are breaking around you. as far as i know he's caught more 50 lb stripers from shore than any man alive.
This IS the Alberto! FG is better for heavy mono.
The fluorocarbon looked very stressed at the end of the knot
This is a great knot I have used for 10 years.
You need to tie the braid in a loop with a knot and do a half granny knot on the leader.
If these steps aren’t done your knot won’t be as strong. I’ve spent many hours testing knots to prove it.
Thank s for show another ways of method to tide the knot 2 different kinds of lines👍👍up.
Wonderful! I think it is strong like the F.G knot
looks like a reverse albright knot, would be interesting to see which is strongest of the two
This is the best lead feeds smooth casting barely can tell switch I'm just beginning but as all beginners learning a whole lot about knots looking forward to much more tips and ??? WWay CCool thanks
Seems like a modified becket bend or sheet bend knot. The only difference is instead of wrapping the smaller diameter line around the bite of bigger diameter once, you did it many times and then retraced it and THEN put it back through the loop. Very interesting I'll definitely be using this from now on
Thankyou I was always breaking off now that I know the correct way I will be ok thanks man I'm going to use that connection of lines when needed appreciate you thanks
It’s just like the Alberto knot. Way easier wrapping braid over Flouro just FYI for guys trying this knot.
Terima kasih perkongsiannya bang...Salam satu hobby🤝🏽
Thanks for the video. I learned that as being the worm knot.
this is easy to tie and very narrow for connecting lines /leaders to run smooth through fishing rod guides .. but what about overall knot strength in comparison and which material line first? the fluro or the braid for step one?.. like this knot!
So many knot vids.....many are similar in nature & look effective. My only problem with braided(20lb) main to fluorocarbon(~8lb) leader....these smaller diameter lines are IMO more difficult to tie with some of these videos....if not the double uni...it's a swivel which also prevents line twist for the win.
The proper Alberto is knot is my favorite knot. I use it every time I fish. If I free line it’s the Alberto knot 100% of the time. Super strong and easy on the guides.
This looks like an Alberto knot to me just wrapping the flouro around the braid instead of the other way around, Doesn't look like a good knot to me but I will test is and see if it is worth using.
@@FishNFoolLures You should knot wrap with the flouro, wrapping with the braid protects the flouro line from abrasion.
Always use Berkley because it is always a good line. Never has failed me. Also, made in the USA which is important to me.
Mate, Brilliant! .. Thank you.
great sir, greetings from indonesian fishing
Thanks brother
Muy bueno 👍 Pero el nudo siempre deforma la linea adelgazándola en alguna parte, se ve claro al final del video. ✅
In some places this knot is called the Alberto Knot.
It's called the Alberto Knot tied incorrectly.
@@ebisu8824 LOL....exactly...this ain't no alberto... Improved bristol is the common name.
Alberto knot
I wonder what breaking strain versus the uni knot ?
Looks like a improved Albright knot
Just near the knot, it seems the strength of the leader line is compromised due to excessive friction with the braided line.
Noticed the same thing
fist thing noticed upon completion
exactly, this knot requires to much tension in grapping, which leads to weakness the mono leader
Thank you for sharing my friend new friend watching
Thnks brother 🤙🤙🤙
it is an albright knot made in reverse by spinning the nylon instead of the braided thread
I only use this knot on light tackle for bait fishing or small fish or in some cases where my gear is very heavy and overkill for the drag requirements it’s impact strength is not that great and it can slip if too few turns are used! I use my own modified fg or Bimini then to this knot or another similar that was taught to me by Phil Atkinson and he called it the tony Jones leader knot
Looks nice and smooth..but wouldn't trust it over my FG knot.
It lacks a double half hitch locking knot at the end 😅
Great video thanks .😊
I would be concerned with the damage on the leader immediately adjacent to the knot where it has burnt/stressed the leader
I tied this knot the other night with the line still on spools. I wet it, cinched it down, and proceeded to pull. It only took about 10# of force for the knot to slip and come untied.
This channel is maximum dope 👍🏼
thanks best knot ever and esay thanks a lot
Improved Albright been tying it for years. And no way it's 1000 x stronger that the line
Looks like a modafied Albright or Crazy Alberto. But it will be smaller if you wrap the braid around the mono.
“Modified” is kind. Backwards is probably more accurate
Oh again. Loon UV Knot Sense is the shit for finishing knots. No melting, no super glue, no BS. You all have a lot to learn.
Gostei vou começar a usar esse nó
Mantep sekali cari ngiteket nya 👍👍👍
узел морковка обычно прри вязании плетеным шнуром идет обмотка вокруг флурокармоного шоклидера. У вас наоборот обкручиваете флурокарбоном вокруг плетеногошнура.
Yeah I’m gonna pack gloves and put them on every time I want to tie on a leader. I use Albright knot, no gloves, 60 seconds and I’m fishing and haven’t had a failure in 20 plus years.
A nice-looking knot, but, in my opinion, a hybridisation of the Yucatan and Carrot Knot. The true Carrot Knot goes by several different names - Carrot Knot, Bullet Knot, Mahin Leader Knot, and always starts with an Overhead Knot (Granny Knot) usually on the leader line. Once completed, you have a knot with all the tag ends at the back of the knot and all the wraps at the front of the knot forming a close approximation to a 'carrot' or 'bullet' from which it derives its name.
Normally, the main line, like braid, will be thinner than the leader line material, so it makes sense to make the overhead knot on the thicker material. But should your main line be thicker than your leader line - say 20 lbs main line to 12 lbs fluoro, you are better off making the overhead knot on the main line and using the thinner leader line to make the wraps. It will be just as strong, but not as stream-lines since your wraps will now be facing inwards towards the reel rather than outwards in the direction of cast.
Thanks )
Youre welcome 👋👋👍👍
Strong knot but despite wetting the knot you can see the friction on the leader between the knot and the leader which makes it vulnerable
Ikatan nya Sangat bagus kuat dan rapih Mr🤔👍🎣🔔💪
Thanks
Fg knott is king
Ikatan knot yang cukup kemas dan padu 👍🏻👍🏻👍🏻
Kamu nanyak
😂😂😂😂 hardy you learn a hard way bruuuu 😂😂
Improved albright knot.
The braid should be wrap around and biting to flouri leader, not the other way around
Knots master !!
Decent knot but definitely tapered the wrong direction for casting. Like others have said wrapping the braid round the mono is better for sure
Great demo except it would be better if you lubed up the line before you start pulling on the lines! Will help prevent burning the mono from the friction.
nice tune
Нет слов,как хорошо!
Thanks for sharing
That’s the easiest way I’ve ever seen it done 🤓👍
Excellent knot
🙏🙏
I have just set up 2 reels on braid, one with a Rufus knot and the other with Nail to Nail
Nice. Thanks for sharing your knot tying abilities. I will definitely use this knot. Thanks
Seeing him wear gloves to tighten that is no joke. Tried it without and the braid went right into my skin
This is the alberto knot I think? Seems the same. Great knot!
I know the FG is the strongest know but this knot is so fast and easy. Sometime good enough is all you need.
Hey Fishing knots, love your content! I subscribed to your channel
Well done, you just created a bigger version of the Alberto. LOL
.steady neat and strong👍✊
is it better to knot sg or carrot? which one passes best through the rings
That’s a backwards RP or Alberto knot. Been used in Southern California for years.
Simple knots work fine for inshore fishing. Its about teeth and abrasion. Surgeons knot works fine tied in 10 seconds. Then I use FC with a renzetti finish for light freshwater.
매듭법에 강도는 역시 침이였군요 ^^
I like that knot...