I managed to get a 26mm flat to work on my thunderbird's 212, put it's mostly for race...doesn't like to putt around at low speeds very much but open the flood gate and hold on. I'll let you ride it if you're able to make it in August. In the mean time, God bless brother.
Might want to start filming the build for the upcoming Gopowersports 180 in November. It will be here before you know it. We have our weapon designed and ready to do battle with all the UA-cam builders. I don’t have the time or desire to do videos like UA-cam folks but the equipment we will be bringing should be front running quality builds. Look forward to the friendly competition. 👍🏻
Sorry for the safety safari 🚨🚨 but please please please wear a face shield when using those cut off wheels. Dude at work almost lost an eye. Super lucky. Ok, back to the video! Great work on the channel btw! #minibikeftw
i have managaed to fit a vm30 mikuni on my predator 224 with a new piston and rod, govoner delete and ported the head it runs great i just have to let the bike warm up a bit before i can ride so it dosent bog out. i have not changed the jetting yet and dont know what it is curently
Good merican engine-uity and hotrod outa the box critical (no not "race" theory or mayhap so) thinking! came here for a break on the doom and gloom BS I normally watch.
It sounds so much better with a proper end can. Them silencers go power sports sell dnt have any sound to thm and don't look gd either thats my opinion, the v twin u had with proper end cans on sounded mean as f***. The next video is gona be the one for me to watch cos I've gota rebuild my front shocks on my cbr125r I've rebuild shocks before but some tips will be helpful+ I want to slightly stiffen my front shocks up so that they hold up better
Im moving RN but I have 2 bike projects im anxious to get on. an old IT175 no motor but got a predator and clutch setup ready to go and some buddies just gave me a 67 Honda CT200 which is really a 90cc trail bike with hi and low gears. thats needing some love and tires...
I bet u guy's use the cookie sheet's more then u use them for cooking. I use old cookie sheet's to rebuilt carb's all the time for friend's or neighbor's. U should get exhaust fan's near that work area. I do where i work at and also my garage and it get's the smell out dam good. Since i work on carb's all the time. I can even tune Chevy motor's without a timing light. And when are u going to start building ur house?
I got a mini bike because of these guys
Same
Same here got my boys and I all one.
Same
The juggernaut on that thing would b nasty. ❤
This channel is great. I wish this kinda thing was around when I was a kid.
I managed to get a 26mm flat to work on my thunderbird's 212, put it's mostly for race...doesn't like to putt around at low speeds very much but open the flood gate and hold on. I'll let you ride it if you're able to make it in August. In the mean time, God bless brother.
Long awaited video. I'm working on mine as well. The swing arm. I'm using parts off a Yamaha Blaster frame...
Damn what a
Happened to the 479cc mini bike we havnt seen that in months
Thx for the tuning tips! step 1....warm up bike and turn OFF choke :D
Might want to start filming the build for the upcoming Gopowersports 180 in November. It will be here before you know it. We have our weapon designed and ready to do battle with all the UA-cam builders. I don’t have the time or desire to do videos like UA-cam folks but the equipment we will be bringing should be front running quality builds. Look forward to the friendly competition. 👍🏻
Sorry for the safety safari 🚨🚨 but please please please wear a face shield when using those cut off wheels. Dude at work almost lost an eye. Super lucky.
Ok, back to the video! Great work on the channel btw! #minibikeftw
Hey Red Beard, how about electric start as an upgrade ?
Adds weight and there are races out there where they have to be pull start.
You think that’s possible? How would you do that?
@@j_w_d_s OMBwarehouse.com has a kit looks like, just seen it
Man I would be unbeatable on the track with that bike great work guysb
Hell yea, you know the deal👍 rbg needs that Tampa Tune👍
@@CainSample ya buddy Cain that bike would see more rpms then it ever could handle 😂
Smoooooth!!!
I want this bike really bad
Alternative to lock tight lock washers I use washer, lock washer then nut.
Gotta love Harbor Freight💪
That thing looks AWESOME! It looks kinda like an offroad sport bike!
After we finish the Yerfdog we got I want to build one of these! Love the suspension in this!
Yeah that thing has a lot more power I can hear it wanting to open up Can't wait to see it rip when y'all get it dialed in Cool looking bike 🔥👍 ✌️
Sounds powerful 👍
Make 1 change at a time ALWAYS...just my 2 cents😜✌
is there lag in throttle response with the long intake pipe between the carb? awesome set up
You should weld a Bracket to put foot pegs in the middle of the bike
Hi Greg were is the build video of this swing arm mount change I like this way a lot better nice builds.
i have managaed to fit a vm30 mikuni on my predator 224 with a new piston and rod, govoner delete and ported the head it runs great i just have to let the bike warm up a bit before i can ride so it dosent bog out. i have not changed the jetting yet and dont know what it is curently
Молодцы идея вилки задней и промвал как у меня.но вариатор в таком сочетании делает этот минибайк очень шустрым.лайк
red beard i have a air filter kit but its getting to much air what do i do
Love these videos
Why does my stock 212 hemi accelerate that quick like that its a beauty she acts
Making the oil passage holes smaller will help a lot on that front end..weld em up and redrill smaller??
Good merican engine-uity and hotrod outa the box critical (no not "race" theory or mayhap so) thinking! came here for a break on the doom and gloom BS I normally watch.
Does a longer intake manifold effect performance at all
Sick
Hi can you post or tell me were the build for this set up is I would like to see it keep on building cool stuff thanks.
Awesome
Nice keep it up brother
Hell yeah rbg💪👍
i'd love to get an mb200, but they are illegal in california. no idea why, my guess is some sorta emissions thing.
Rip California lol
Is it just completely illegal to have or could you go to another state and bring it into California?
Go to tractor supply company, they sell Coleman bikes
That is what you get living in a Maxis socialist's state
It sounds so much better with a proper end can. Them silencers go power sports sell dnt have any sound to thm and don't look gd either thats my opinion, the v twin u had with proper end cans on sounded mean as f***.
The next video is gona be the one for me to watch cos I've gota rebuild my front shocks on my cbr125r I've rebuild shocks before but some tips will be helpful+ I want to slightly stiffen my front shocks up so that they hold up better
wow! l have the camo 200cc coleman like that one. l alwayz wondered if u could add shocks and suspensions to it now it's proven. .😲👍🏾
What the header pipe? I want the muffler but idk if it will fit my header pipen
Does anyone know of an electric version of these trail bikes? Especially with the fat tires... Ive seen the Volcon Grunt.
Does anyone know if this kit will work for the mega moto 80 frame, says it does on the site but I feel like if it did gps wouldn't be working on one
"Clamps!!!...i expect em!!!" (pug1)
You Bess! Don't be callin in Rick buds!
@@american7169 lol now Dicky joined the inwood exscape clan prolly livin with dirty ol Rick!...beg my pard!
or Lemmy prolly!!!
Sucklin pant antlers terrible while shittin in a bread bag... Ffs skusting!
I'm doing this
Which kind of steel u used to make your spindle
im thinkin of buying a dirtbike soon,anyone in the comments got any ideas for cheap but good helmets
Jopa is pretty good ans they are like $100-150
What is the length axel to axel?
They really live in that small office size space on the front part of the shop? That's crazy..is there a bathroom? Lol im confused to say the least
Im moving RN but I have 2 bike projects im anxious to get on. an old IT175 no motor but got a predator and clutch setup ready to go and some buddies just gave me a 67 Honda CT200 which is really a 90cc trail bike with hi and low gears. thats needing some love and tires...
electron carb on it
rub the numbers with a grease pencil or a black crayon. that should help
Looks a little like a hill climb bike with the swing arm way out there. How cool would a mini bike hill climb event be?
I bet u guy's use the cookie sheet's more then u use them for cooking. I use old cookie sheet's to rebuilt carb's all the time for friend's or neighbor's. U should get exhaust fan's near that work area. I do where i work at and also my garage and it get's the smell out dam good. Since i work on carb's all the time. I can even tune Chevy motor's without a timing light. And when are u going to start building ur house?
all those explinations for choke being on, lol
😇🙏👍
With the stiffer suspension upgrade it might ready to hit that jump :D
I opted for a much simpler design on mine, basically ripping off the trailmaster design: ua-cam.com/video/5c0a0gFEg90/v-deo.html
Sup
Carbadater??? Is that anythink like a carbamuhrater??
This should be renamed " how to tune a carb"
Really you break it all down complete with test rides
Everyones weight is to far forward...longer seat , move the foot pegs back and fork mods - like the swing arm build
69 comment
The reason you’re having so many tuning problems is because you put the carb so far away from the engine
Camera angles suck brah.