These guys are legit. My 55" Samsung crapped out just over a year old. Replaced power supply board and saved big $$$. You guys are awesome! Buy the kit, cheaper to replace all the guts than buying individual components. Now I have spares in case this thing blows something else (hopefully not the power supply board again).
Thank you so much for this video! I used your website to browse replacement T-Con boards for my Samsung UN60EH6050FXA. Your website was so helpful in being able to suggest substitute boards that work better. I had to wait a few months for the substitute parts to become available, but I purchased the replacement part, followed your video to replace it, and my TV works again! You guys are awesome. Again, thank you so much.
Thank you very much for this video. My Samsung TV is now good as new, as I was able to repair it with your help.. and of course, a new T-con board I bought from your Ebay store. :)
Liked and subscribed. Thanks for the video. The tcon replacement was easy and a fraction of the cost as quoted by the repairman. Those fragile ribbons are scary. I was so nervous but it all worked out. Thanks again.
I have a Samsung 75. Has a green vertical line down the right side. I can change the color of the line by slightly turning / bending the tv. Also it disappears when I do it as well. Do you have recommendations of what would fix that
Hi, I have a Samsung UN50H6201AF Back lighting works and audio but no picture. Do you have any trouble shooting videos for the this model as it uses a different t con board. My tv has a t500hvn09.1 ctrl bd 50t26-c03 t con board. Thank you
I bought a replacement t-con board that came with the bottom strips attached, should I use the strips that came with the new board or that were on the original board?
Hi Jimmy. I have UN60EH6003F 60" LCD samsung TV. TV had volume but no Video, it only had a blue screen. So I changed the T-Con board. The TV started working for a day then it would show few lines across the screen and gets worse in time and in a week the TV screen went back to the same problem with no video and audio only. Could it be a T-Con board fault again. Please help
I purchased a t-con board from you to replace what I'm hoping is the problem with my 40" Samsung. Unfortunately, the screws securing the board were very tight and wouldn't come loose. Now, the phillip's heads are stripped. I have multiple sets of screwdrivers for this type of work, having done PC repairs for years. I've never had this kind of trouble. I've never used power screwdrivers either, always opting for the lighter touch of manual drives. I'm not sure what my options are at this point. The panel is stuck, the screws won't come loose, and the heads are now stripped. Any advice would be appreciated.
I just ordered a complete repair kit form you and I hope that I'm able to resolve my issue, my tv is stuck in the Manufacture color test mode. do you have any advice for me? My plan was to replace the tcon board.
Hello Jimmy, I have a Sony Bravia KDL-46W510 model, this TV has a problem when i try turn on it, the TV turn on but the screen is black if i press the menu button i can hear the sound when change of option, after 30 seconds aproximately the TV turn off and a red blink light 14 times intervals. What problem do you think has this tv?
gosaoro Try all repairs and troubleshooting at your own risk. I recommend replacing the main board in your TV. Click this link to replacement parts for your TV model number: www.shopjimmy.com/sony-a-1734-656-a-bu-board.htm Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: ua-cam.com/video/Aodz2LHkzbY/v-deo.html Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com
Jimmy, I am having a hard time removing the y-board on my Samsung PN64F8500AF, any tips. I have already unscrewed it and unlatched the ribbon but removing the board from about 8 side connectors is seemingly impossible....thank you for any assistance rendered.
Hello, i posted 2 days ago about my samsung 60 inch UN60FH6200FXZA with no backlights, has image using flash light method, and has sound. So at first I ordered a T-con board but i guickly canceled my order after re-watching this post on the T-con board. I ordered my Power Supply/LED board BN44-00669A and installed it today with the same result. Still no backlights. With both boards I get the same thing. At first power on the backlights blink and thats all I get. I get sound and image with flashlight. Is there anything else that I should look for or do you suggest anything else I should replace? Thank You! Also I want to say that whoever handles all the emails I sent to cancel my T-con board, handled them fast and I am very happy with the customer support. So thank you
Hi Laurence I have the sane exact tv with same exact problem i replaced the power supply and nothing.. Im thinking about the tcon or the main board what do you think
+Laurence Reyes that's sad news i don't even use it that much i mostly work all day and im single.. I don't know what to think about samsung.. You think the lcd panel is bad??
Hello Jimmy My 60'' TV Samsung S/N UN60EH6000FXZAVERSION HS01 has sound but no video or picture I already try to change the T-com Board and the Main Power Supply Board but Still no luck the only one i have not try is the Power Supply /LED Board do you think that could be the problem?
Hey Jimmy I have a Sony Bravia KDL 52S5100 SN 8052243. The set still works great with the antenna but will no longer recognize any of the other inputs. and it seems that it is no longer sending digital signal to my sound system (sony BDV E370)
Have Samsung UN65KS8500 3D not working. In 3d mode picture goes black with flickering in background. Already replaced panel once. Same issue. Please let me know what u would recommend. Thanks!
Hello I have the Samsung Model UN50H6350AFXZA Type UN50H6350 and I have no video, the back lights work and I have sound. I did loosen the ribbon cable to the T-Con and video did appear and sometimes their was multicolored lines but the video did slowly disappeared when I pushed the latch down on the ribbon cable. Want to get your opinion on replacing the T-Con or possible ribbon cable bad.
I have a UN55J6201 that has no backlight or image. I've replaced the motherboard and power supply board but still have no backlights or image. I was checking for loose connections and I touched the LVDS cable from the motherboard to the T-Con board the backlights came on, but I didn't have an image on the screen. The connections are good on the LVDS cable. The backlights only come on if I touch the cable itself. What would cause this?
I have a 49" Samsung model: 49nu7100. The right-hand side of the screen has faded to black. (The last third). It's like this when you turn it on. Have done the Samsung "tests". No improvement. Can you advise if this is the t-con board and if so, where I could purchase a replacement. Kind regards
Hey Shop Jimmy my tv is a UN60EH6050Fxza model that has this issues but it also doesn't have sound, I'm not if this steps apply to this situation as well and if it those I'm not sure which T-con board model would be appropriate for me to replace my current one. Please replay thank you
I recently bought a replacement of the T'con board because my Sony oled 77 inch tv model A9G keeps flickering on and off especially when the brightness level is high. Do you think this will solve the problem?
I have a question! Samsung UE46F6510, has vertical lines that were within a particular section of the screen. I suspected the TCon board, ordered another one (exact model number and everything), with the new board the backlight doesn’t even go on, I checked the fuse it is fine, I connected back the old board and backlight is back on (still with vertical lines), I connected new board again, no backlight or anything (but could hear the tv is on due to pressing buttons). I unplug the main ribbon cable from the new board (the one coming from inputs board) and backlight goes on. I checked the connector pins on both boards under a microscope all seem fine, so what am I doing wrong? Why won’t the new board just work? Cheers, Rami
I have a samsung smart tv 3d un46es7100 at first it came out a transparent flashes fires soon after the changes were colored. Some blue and some red all over the screens. Can be the tcom or is the screen as I have seen in other forums. Sorry my english is not good
I recently purchased my T-con board from you and replaced it today and the issue remains. I have sound, no picture, the back lights are on, so my first step was the T-con board. The only other thing I see is a flash of two or three vertical white lines in the center of the screen when I turn it on. I looked at all the capacitors and none of them seem to be blown or bad. I could use some help with my next step please? I have a Samsung UN40EH5300FXA. Thanks.
Hi there i have a Samsung UA55HU7200 55inch curved tv that has about a 1/3 of the left hand side of the screen is dark, it originally would light up after the tv was on for about 15 minutes but was still noticeably darker then the rest of the picture, now its very dark but still displays the picture if you use a torch or get really close to it, and is the same with any input, any thoughts to what may be wrong would be appreciated
I had back lights and sound. I replaced the tcon. Then had a picture but the color was wrong with lots of red. I got a replacement tcon board again and now im back where i started with back lights and sound but no picture. Am i getting bad tcon boards?
i ordered a kit for a UHDTV series 6 ( un60ju6500f) I replaced all the boards and plugged them in. Turned the TV on and it powered up, got a blue screen, but that's it. Is there anything else I need to do to re-set the TV??? It's just a pretty blue screen - Please help me if you can think of something..- Thanks- Brett ( I ordered the kit from shopjimmy.com
how much of the number printed on the sticker has to match the replacement? i can find boards that match the number on the board itself, and the first bunch of numbers/letters on the sticker... assuming since the last bunch of digits arent' mentioned, they don't matter?
hello there, I was wondering if you could confirm what I think. checking out a Samsung un24h4500af for a friend and wont turn on. ill skip some stuff for space; couldn't figure it out. on a whim I removed the ribbon from main to small board attached to screen and main board turned on and bl turned on as well. checked small board; no burnt or black chips. no burnt smell either. could that board or the screen cause main not to work. thanks. HS.
I have a Samsung ( Model Code ) LNT 4661FX/XAA or Model # LN-T4661F My screen occasionally goes dark in the middle of the screen, or to the left and sometimes when it goes dark in the middle the left side of the screen is blurry.. after a min everything clears up and the tv works fine. Is it a TC board? I've had the lcd tv for 8 + years. I just bought a UN50J6200AFXZA. and I'm not to thrilled about the black out problems I'm hearing about. Your opinion is greatly appreciated. Thanks Robert.
Replace main board and power supply board on vizio e420i-bo. Fixed previous issue. But seems like ribbon cable was somehow damaged in the process. Right side of screen now displays vertical line, solid white vertical strips, or all black. If this cable is replaced will this fix the issue? Any comments or advice appreciated
hi,I really appreciate the work you do in helping us with these tutorials,and I would like to ask you about my Samsung LE32R87BD [R] it turns on and in a short time lines vertical then turns to black,and stays like that,if you switch it off and on again stays the same,nly after few hours you can see it on again,so I thought could be T-con?
Question? My Samsung tv has some vertical lines in the middle of screen. They seem to be permanent. Would the T Con board be the fix? I tried the reset, checked hdmi connection. Thanks
I replaced the tconn board on my UN60H6350AF, still having the same issue. screen is dark but you can see if you hold a flashlight to screen. any info will be greatly appreciated.
Hi jimmy I have a samsung un46c6300sfxza and have vertical and horizontal lines on the screen and sometimes it goes away but sometimes not what will cause that and could I fix it if I can thanks
Hi! I have a Samsung TV model UN60EH6000FXZP version HS01 with sound but no display at all, just a black screen. The T-con I found is for model UN60EH6000FXZA, is it compatible with my version?
Hi ShopJimmy.com I have aUN46C800FXZA version #SQ01 Turns on, No picture it does have sound.Back lights seem to be working.I did the flashlight test and cant see anything.Screen lights up a little bit but stays black.Im guessing I need a tcon board.Had a some what difficult time distinguishing where it is.Does this model have a tcon board? and is it on the bottom by the stand, top right left and do you think the tcon broad is what I need. Thank you.
I have a Sony kdl48w600b I replaced the main board there is a red light on at the optional audio output and a red light in the front of the TV at the on switch in addition to this when I unplug the ribbon cable from the main board I get temporary sound and the screen lights up however when I plug the cable back all I get are the red lights any suggestions would be helpful
hi, i have a samsung tv UN50H5203AFXZA MH01. the problem is when i coonect the power cable the standby light starts blinking and when i start it i am getting nothing (just black screen). i watched many of shopjimmy repair videos and thought it might be the power board or main board. i ordered both from shopjimmy.com, but they problem was not solved. i am thinking of replacing the t-com board. it is out of stock in shopjimmy. however, is that the correct approach. is it probable that changing the t-com board will fix the problem or do you suggest something else. thank you in advance.
Does this also apply if the TV shortly fades to white horizontal line starting from the top of the screen to the semi bottom and the rest is still functioning
I have a Samsung 40" LCD T.V. model number: LN40C630K1F. I have a picture for 30 to 60 seconds then it just goes black. If I turn it off and then back on its the same thing. I never lose audio. if I turn the backlight down in the picture settings it says on a LOT longer. Do you think I should change out the TCON board or the backlight inverter? Thanks...
Hey there I have a Samsung LED 46" Un46eh6000f. Im about to buy a tcon board from ebay. Is there a certain tcon board im suppose to buy? The reason I ask is cause someone is selling one on ebay and had a different tcon board number (mine is BN96-22239B) does that matter?
My Samsung LN37A450C1DXZA picture color is distorted. It's like looking at an old photo negative with color. Is the t-con board responsible for this color distortion? Other UA-cam videos seem to think so. Would you agree?
I have a question I have a samsung tv model LN40B530P7NXZA At 1st my picture was all distorted kinda like a negative so I went into the service menu and tried to see if I could fix changed the setting accidentally that said model did a factory reset It came on but could not connect to my cable Direct Tv after turning on / off several times now I have no picture. I do have back lights as described in your video and before this happened I had sound. But now I have no sound so do you think it’s the tecon board.
Hi, I replaced the t-con board because i had sound but no picture. I replaced the board and I had a picture for a while then the screen froze and then faded to black. the tv is only 2 1/2 years old. Model #UN60EH6050F. Could the new board be bad?
Hi Shop Jimmy. I have a Samsung UN46FH6030 and the picture has gone dark. The picture is still visible and the sound is working perfectly. There isnt any type of ghosting or bright spots on the tv....its just about half brightness. Same thing on all the HDMI inputs. Any advice would be appreciated. Thank You!!
I have the UN50EH5300FXZA that I could hear sound but the picture stopped working. I have 2 of these TVs same model so I just switched out all 3 boards (T con, Power, and main boards) and it still doesn't work. All the parts from this faulty TV seem to work fine in the other one. So if not one of these 3 boards what else can I try?
I have a Samsung model number UN55HU6950FXZA with some black vertical lines varying in size in the middle and on both sides of the screen that stay in the same place all the time regardless of the input source. All of the backlights appear to be working properly. Ive carefully disconnected, cleaned and reconnected all ribbon cables etc and the problem remains. Can you please offer suggestions on what is most likely the problem? Any help would be greatly appreciated. Thank you!
Liked the video.. I have a curved Samsung UN65h8000af and have no picture. It is just a black lit up screen. I can hear the click sound from the volume being scaled up or down but cannot get a source to show image or sound. Please help!!!!! Thank you!
I have a question, I bought a veon tv and the model is sro9111. The backlights and sound work but it has no picture. I am assuming it could be the t-con board. So I am going to get one and replace it myself. However, I cannot find the supplier for VEON. It remains a mystery so the only way I can get the part for it is to go through the place that I purchased my tv from. What I want to know is can any t-con board work for my tv model? Other information I found out when searching on Google was and I quote "The VEON range is manufactured in China using the same components as leading brands such as Samsung, LG and other large LCD/LED manufacturers", Sep 26, 2011.
Hey, I have a Samsung UN60H7150. It's about two years old. Audio works, inputs work, and picture shows, but vertical and horizontal lines plague the screen with a red-pinkish tint in 2 areas on the same side of the screen. Does this sound like the T-Con? Any confirmation would be great thanks.
I have a white line going vertical about 9 meters wide. I thank it appeared because my cat sprayed on it. What do you think that I can do to fix it. Its a brand new Samsung 65 in curved 4k tv
I have a Samsung un55d7000lfxza it has sound and dim background light that lightly changes when switching through input button. would this be the same problem? thank you.
Hey, I have a Samsung UN46B7000. It's about two years old. Audio works, inputs work, and picture shows, but vertical and horizontal lines plague the screen with a red-pinkish tint. I watched a few other videos and it sounds like the T-Con? Any confirmation would be great thanks.
Hi I have bought a tcon board from your site and the replacement board kept giving me the turn on chimes but never turned on. I called the website and they sent me a replacement and now it's doing the same thing. What could I have done wrong?
I have a Sharp Roku ready TV model LC-50LB371U. Today the picture went black with audio. Prior to this happening, the top of the screen was fading but it was hardly noticable. At this point, would it be the T Con board?
Hello, I have a SAMSUNG UN50M53002AFXZA that does have the backlight LED strips working , put does not power up / start when plugged in. I have purchased all three boards (PSU, Main and T-CON) and after replacing them, still no power up... What can I do to troubleshoot, TV is open and multimeter is ready to go!
Hello Jimmy- We have a Samsung LED that had sound and backlight, but no picture. Through you videos, we diagnosed and replaced the t con board. Now, there is a picture, but it is very faded and faint. Where should we go from here? Thank you very much. -amy
Luis Castellanos This sounds like a TV panel (TV Screen) problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com
i have 46 inches philips 2010 model its t con board is to be replaced . but i contacted the philips tv they say as the warranty is finished and the tv is old so they canot help. how to get the t con board 46
Hello, I have the UN60FH6200FXZA and have no backlight. I do have sound and picture using the flash light. I have been searching for the LED driver/inverter locattion for this model. I am wondering if it is built in to the power supply board.
Hi, we have an LG 47LN5400-UA BUSYLJR. The tv has sound but no picture. I have performed the flashlight test and I do see images on the screen. Can you help diagnose the faulty part?
+jlawhead36 Try all repairs and troubleshooting at your own risk. This sounds like a problem with the actual LEDs inside your TV. These LEDs are replaceable, however it is recommended they are replaced by someone with the proper experience and training. When replacing the LEDs, the TV panel can get damaged. If the TV panel gets damaged, it is not repairable. Click this link to replacement LEDs for your TV model number: www.shopjimmy.com/catalogsearch/result/index/?cat=299&q=47LN5400-UA Be sure to match the panel information necessary to ensure you have the correct replacement LEDs.Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com
Hi Jimmy, I have a 3 1/2 year old Samsung TV UN60ES6500FXZC The screen is covered with color vertical lines and you can barely see the picture behind the lines. The sound is OK. Would the T-Con board fix this problem. Thanks
I have a Samsung smart led tv model # un46h5203af the screen went black but it has sound and with flash light can see image but can not change channels replaced power supply with led driver on it but still the same do I need to replace the t com booard o the main board as well
Hello Shop Jimmy. I have a Samsung LN32D403E4D. Whenever the TV gets hot, it starts to show double images. I have went ahead and replaced the Main Board, but still having the same problem. I await your suggestion for this problem. Thanks in advance.
Robert Robinson This sounds like a TV panel (TV Screen) problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com
Hi thank you for the videos. My tv is a samsung 46 inch LED. While watching tv either from my cable box or fire stick 2 different inputs both hdmi, the tv will flash and go to a white screen with sound. Sometimes it even goes black with no sound and the power button starts flashing. I have to unplug it just to be able to turn it back on.
hi Jimmy shop, my name is NORM , I was able to replaced the main board of my 42 led smart LG tv , but sad to say it's not working yet . Please send me advise . Than you
I have a Samsung model UN39FH5000FXZA. It has sound but no picture. Did the flashlight test no back lights replaced power supply board. Still no backlights. Do I need to replace the backlights?
Hi I have a Samsung 65 in curved LED tv. Model # UN65HU7250F. I was watching a show when the picture went out but the back light is still on and I could still hear sound. Is this the Tcon board and if so do you have that part for sale? Thank you
Hi suddenly have this vertical and horizontal lines. And now its completely black. It’s still has its audio and backlight. Do you think replacement of tcon board is the solution?? Hoping for a response. Thank you in advance 🙏🏻☺️
Hi I have a Samsung ks8000. Problem is I have black screen with colorful vertical lines going straight across from top to bottom. Can you please tell me what's the problem and solution. Thank for your response.
last night i was watching tv and the screen just turned like rainbowy you could see the picture still just very tinted after switching inputs from tv,xbox to computer the color stayed the same i turned the tv on the next day and now its just a white screen. sound still works would this t-con work? the video said all black screen?
These guys are legit. My 55" Samsung crapped out just over a year old. Replaced power supply board and saved big $$$.
You guys are awesome! Buy the kit, cheaper to replace all the guts than buying individual components. Now I have spares in case this thing blows something else (hopefully not the power supply board again).
Thank you for this video. I just replaced the T-Con, which I bought from your store, and now my TV works again.
Thank you so much for this video! I used your website to browse replacement T-Con boards for my Samsung UN60EH6050FXA. Your website was so helpful in being able to suggest substitute boards that work better. I had to wait a few months for the substitute parts to become available, but I purchased the replacement part, followed your video to replace it, and my TV works again!
You guys are awesome. Again, thank you so much.
I replaced my T-conn board based on this, it was very easy. Thanks
I just recieved and installed a new T-Con board for my Samsung TV. It works perfectly!!! Thanks ShopJimmy.com!!!!
Thank you very much for this video. My Samsung TV is now good as new, as I was able to repair it with your help..
and of course, a new T-con board I bought from your Ebay store. :)
I replaced the t con board after watching this u tube video, it was great and TV works greats.
Liked and subscribed. Thanks for the video. The tcon replacement was easy and a fraction of the cost as quoted by the repairman. Those fragile ribbons are scary. I was so nervous but it all worked out. Thanks again.
Do you have a video on replacing the tcon board on a Samaung UN65KS800D?
I have a Samsung 75. Has a green vertical line down the right side.
I can change the color of the line by slightly turning / bending the tv. Also it disappears when I do it as well. Do you have recommendations of what would fix that
Hi I have a un75f6300 and have got one thin vertical line on the right side of my tv..do you think I might need to replace my tcon board??? Thanks
Hi,
I have a Samsung UN50H6201AF
Back lighting works and audio but no picture. Do you have any trouble shooting videos for the this model as it uses a different t con board.
My tv has a t500hvn09.1 ctrl bd 50t26-c03 t con board.
Thank you
Hi new help Samsung un65ku6500fxza version fa01 has blue tint throughout- sound good - is it tcon or backlights ? Thanks
Fantastic vid, thank you!
I bought a replacement t-con board that came with the bottom strips attached, should I use the strips that came with the new board or that were on the original board?
Hi Jimmy. I have UN60EH6003F 60" LCD samsung TV. TV had volume but no Video, it only had a blue screen. So I changed the T-Con board. The TV started working for a day then it would show few lines across the screen and gets worse in time and in a week the TV screen went back to the same problem with no video and audio only. Could it be a T-Con board fault again. Please help
I purchased a t-con board from you to replace what I'm hoping is the problem with my 40" Samsung. Unfortunately, the screws securing the board were very tight and wouldn't come loose. Now, the phillip's heads are stripped. I have multiple sets of screwdrivers for this type of work, having done PC repairs for years. I've never had this kind of trouble. I've never used power screwdrivers either, always opting for the lighter touch of manual drives. I'm not sure what my options are at this point. The panel is stuck, the screws won't come loose, and the heads are now stripped. Any advice would be appreciated.
I just ordered a complete repair kit form you and I hope that I'm able to resolve my issue, my tv is stuck in the Manufacture color test mode. do you have any advice for me? My plan was to replace the tcon board.
Hello Jimmy, I have a Sony Bravia KDL-46W510 model, this TV has a problem when i try turn on it, the TV turn on but the screen is black if i press the menu button i can hear the sound when change of option, after 30 seconds aproximately the TV turn off and a red blink light 14 times intervals.
What problem do you think has this tv?
gosaoro Try all repairs and troubleshooting at your own risk. I recommend replacing the main board in your TV. Click this link to replacement parts for your TV model number: www.shopjimmy.com/sony-a-1734-656-a-bu-board.htm Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: ua-cam.com/video/Aodz2LHkzbY/v-deo.html Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com
Jimmy, I am having a hard time removing the y-board on my Samsung PN64F8500AF, any tips. I have already unscrewed it and unlatched the ribbon but removing the board from about 8 side connectors is seemingly impossible....thank you for any assistance rendered.
Hello, i posted 2 days ago about my samsung 60 inch UN60FH6200FXZA with no backlights, has image using flash light method, and has sound. So at first I ordered a T-con board but i guickly canceled my order after re-watching this post on the T-con board.
I ordered my Power Supply/LED board BN44-00669A and installed it today with the same result. Still no backlights. With both boards I get the same thing. At first power on the backlights blink and thats all I get. I get sound and image with flashlight. Is there anything else that I should look for or do you suggest anything else I should replace? Thank You!
Also I want to say that whoever handles all the emails I sent to cancel my T-con board, handled them fast and I am very happy with the customer support. So thank you
Hi Laurence I have the sane exact tv with same exact problem i replaced the power supply and nothing.. Im thinking about the tcon or the main board what do you think
+julio saenz i have replaced all three boards with no success. i looking for LEDs right. I returned all three boards and lost all shipping charges.
+Laurence Reyes that's sad news i don't even use it that much i mostly work all day and im single.. I don't know what to think about samsung.. You think the lcd panel is bad??
+julio saenz I think its the LED's
+Laurence Reyes how do we fix that...
Hello Jimmy
My 60'' TV Samsung S/N UN60EH6000FXZAVERSION HS01
has sound but no video or picture
I already try to change the T-com Board and the Main Power Supply Board but Still no luck
the only one i have not try is the Power Supply /LED Board
do you think that could be the problem?
Hey Jimmy I have a Sony Bravia KDL 52S5100 SN 8052243. The set still works great with the antenna but will no longer recognize any of the other inputs. and it seems that it is no longer sending digital signal to my sound system (sony BDV E370)
Thanks my TV works again!
Have Samsung UN65KS8500 3D not working. In 3d mode picture goes black with flickering in background. Already replaced panel once. Same issue. Please let me know what u would recommend. Thanks!
Hello I have the Samsung Model UN50H6350AFXZA Type UN50H6350 and I have no video, the back lights work and I have sound. I did loosen the ribbon cable to the T-Con and video did appear and sometimes their was multicolored lines but the video did slowly disappeared when I pushed the latch down on the ribbon cable. Want to get your opinion on replacing the T-Con or possible ribbon cable bad.
I have a UN55J6201 that has no backlight or image. I've replaced the motherboard and power supply board but still have no backlights or image. I was checking for loose connections and I touched the LVDS cable from the motherboard to the T-Con board the backlights came on, but I didn't have an image on the screen. The connections are good on the LVDS cable. The backlights only come on if I touch the cable itself. What would cause this?
I have a 49" Samsung model: 49nu7100. The right-hand side of the screen has faded to black. (The last third). It's like this when you turn it on. Have done the Samsung "tests". No improvement. Can you advise if this is the t-con board and if so, where I could purchase a replacement. Kind regards
My tv is just over 4 years old
Hey Shop Jimmy my tv is a UN60EH6050Fxza model that has this issues but it also doesn't have sound, I'm not if this steps apply to this situation as well and if it those I'm not sure which T-con board model would be appropriate for me to replace my current one. Please replay thank you
Do t-con boards come with the new cords or cables when we buy them new and or 2nd hand ?
It comes with the cables, yet not Panel cable.
I recently bought a replacement of the T'con board because my Sony oled 77 inch tv model A9G keeps flickering on and off especially when the brightness level is high. Do you think this will solve the problem?
I have a question! Samsung UE46F6510, has vertical lines that were within a particular section of the screen. I suspected the TCon board, ordered another one (exact model number and everything), with the new board the backlight doesn’t even go on, I checked the fuse it is fine, I connected back the old board and backlight is back on (still with vertical lines), I connected new board again, no backlight or anything (but could hear the tv is on due to pressing buttons). I unplug the main ribbon cable from the new board (the one coming from inputs board) and backlight goes on. I checked the connector pins on both boards under a microscope all seem fine, so what am I doing wrong? Why won’t the new board just work?
Cheers,
Rami
I have a samsung smart tv 3d un46es7100 at first it came out a transparent flashes fires soon after the changes were colored. Some blue and some red all over the screens. Can be the tcom or is the screen as I have seen in other forums. Sorry my english is not good
I recently purchased my T-con board from you and replaced it today and the issue remains. I have sound, no picture, the back lights are on, so my first step was the T-con board. The only other thing I see is a flash of two or three vertical white lines in the center of the screen when I turn it on. I looked at all the capacitors and none of them seem to be blown or bad. I could use some help with my next step please? I have a Samsung UN40EH5300FXA. Thanks.
Hi there i have a Samsung UA55HU7200 55inch curved tv that has about a 1/3 of the left hand side of the screen is dark, it originally would light up after the tv was on for about 15 minutes but was still noticeably darker then the rest of the picture, now its very dark but still displays the picture if you use a torch or get really close to it, and is the same with any input, any thoughts to what may be wrong would be appreciated
I had back lights and sound. I replaced the tcon. Then had a picture but the color was wrong with lots of red. I got a replacement tcon board again and now im back where i started with back lights and sound but no picture. Am i getting bad tcon boards?
i ordered a kit for a UHDTV series 6 ( un60ju6500f) I replaced all the boards and plugged them in. Turned the TV on and it powered up, got a blue screen, but that's it. Is there anything else I need to do to re-set the TV??? It's just a pretty blue screen - Please help me if you can think of something..- Thanks- Brett ( I ordered the kit from shopjimmy.com
how much of the number printed on the sticker has to match the replacement? i can find boards that match the number on the board itself, and the first bunch of numbers/letters on the sticker... assuming since the last bunch of digits arent' mentioned, they don't matter?
If there is a bunch of colored lines going vertically and sideways is it the t con board.
hello there, I was wondering if you could confirm what I think. checking out a Samsung un24h4500af for a friend and wont turn on. ill skip some stuff for space; couldn't figure it out. on a whim I removed the ribbon from main to small board attached to screen and main board turned on and bl turned on as well. checked small board; no burnt or black chips. no burnt smell either. could that board or the screen cause main not to work. thanks. HS.
Do you have one for a Samsung 58inch?
Hi
I have vertical green lines intermittently on half of the screen. Could it be the t con board?
Thanks
I have a Vizio e550i-a0 which has a black screen with back lights working. What would you suggest? The main board?
I have a Samsung ( Model Code ) LNT 4661FX/XAA or Model # LN-T4661F My screen occasionally goes dark in the middle of the screen, or to the left and sometimes when it goes dark in the middle the left side of the screen is blurry.. after a min everything clears up and the tv works fine. Is it a TC board? I've had the lcd tv for 8 + years. I just bought a UN50J6200AFXZA. and I'm not to thrilled about the black out problems I'm hearing about. Your opinion is greatly appreciated.
Thanks
Robert.
Replace main board and power supply board on vizio e420i-bo. Fixed previous issue. But seems like ribbon cable was somehow damaged in the process. Right side of screen now displays vertical line, solid white vertical strips, or all black. If this cable is replaced will this fix the issue? Any comments or advice appreciated
hi,I really appreciate the work you do in helping us with these tutorials,and I would like to ask you about my Samsung LE32R87BD [R] it turns on and in a short time lines vertical then turns to black,and stays like that,if you switch it off and on again stays the same,nly after few hours you can see it on again,so I thought could be T-con?
Question? My Samsung tv has some vertical lines in the middle of screen. They seem to be permanent. Would the T Con board be the fix? I tried the reset, checked hdmi connection. Thanks
I replaced the tconn board on my UN60H6350AF, still having the same issue. screen is dark but you can see if you hold a flashlight to screen. any info will be greatly appreciated.
Hi jimmy I have a samsung un46c6300sfxza and have vertical and horizontal lines on the screen and sometimes it goes away but sometimes not what will cause that and could I fix it if I can thanks
Hi! I have a Samsung TV model UN60EH6000FXZP version HS01 with sound but no display at all, just a black screen. The T-con I found is for model UN60EH6000FXZA, is it compatible with my version?
Hi ShopJimmy.com
I have aUN46C800FXZA version #SQ01 Turns on, No picture it does have sound.Back lights seem to be working.I did the flashlight test and cant see anything.Screen lights up a little bit but stays black.Im guessing I need a tcon board.Had a some what difficult time distinguishing where it is.Does this model have a tcon board? and is it on the bottom by the stand, top right left and do you think the tcon broad is what I need. Thank you.
I have a Sony kdl48w600b I replaced the main board there is a red light on at the optional audio output and a red light in the front of the TV at the on switch in addition to this when I unplug the ribbon cable from the main board I get temporary sound and the screen lights up however when I plug the cable back all I get are the red lights any suggestions would be helpful
hi, i have a samsung tv UN50H5203AFXZA MH01. the problem is when i coonect the power cable the standby light starts blinking and when i start it i am getting nothing (just black screen). i watched many of shopjimmy repair videos and thought it might be the power board or main board. i ordered both from shopjimmy.com, but they problem was not solved. i am thinking of replacing the t-com board. it is out of stock in shopjimmy. however, is that the correct approach. is it probable that changing the t-com board will fix the problem or do you suggest something else. thank you in advance.
Thanks sir. I have a question. Where is the vgh and vgl in this tcon board.
UN65NU8000FXZA/FD04 T CON board. You guys do not carry it?
Does this also apply if the TV shortly fades to white horizontal line starting from the top of the screen to the semi bottom and the rest is still functioning
I have a Samsung 40" LCD T.V. model number: LN40C630K1F. I have a picture for 30 to 60 seconds then it just goes black. If I turn it off and then back on its the same thing. I never lose audio. if I turn the backlight down in the picture settings it says on a LOT longer. Do you think I should change out the TCON board or the backlight inverter? Thanks...
Hey there
I have a Samsung LED 46" Un46eh6000f. Im about to buy a tcon board from ebay. Is there a certain tcon board im suppose to buy? The reason I ask is cause someone is selling one on ebay and had a different tcon board number (mine is BN96-22239B) does that matter?
Does the model number of the tcon board matter? Does it need to be direct replacement?
My Samsung LN37A450C1DXZA picture color is distorted. It's like looking at an old photo negative with color. Is the t-con board responsible for this color distortion? Other UA-cam videos seem to think so. Would you agree?
I have a question I have a samsung tv model LN40B530P7NXZA At 1st my picture was all distorted kinda like a negative so I went into the service menu and tried to see if I could fix changed the setting accidentally that said model did a factory reset It came on but could not connect to my cable Direct Tv after turning on / off several times now I have no picture. I do have back lights as described in your video and before this happened I had sound. But now I have no sound so do you think it’s the tecon board.
Hi, I replaced the t-con board because i had sound but no picture. I replaced the board and I had a picture for a while then the screen froze and then faded to black. the tv is only 2 1/2 years old. Model #UN60EH6050F. Could the new board be bad?
help! I'm having trouble with my MD 47LA6200 -DA lg tv . flashing power light and no picture
Hi Shop Jimmy. I have a Samsung UN46FH6030 and the picture has gone dark. The picture is still visible and the sound is working perfectly. There isnt any type of ghosting or bright spots on the tv....its just about half brightness. Same thing on all the HDMI inputs.
Any advice would be appreciated. Thank You!!
Did you fix it.. mine does the same, picture is light , you can hardly see it!!@
I have the UN50EH5300FXZA that I could hear sound but the picture stopped working. I have 2 of these TVs same model so I just switched out all 3 boards (T con, Power, and main boards) and it still doesn't work. All the parts from this faulty TV seem to work fine in the other one. So if not one of these 3 boards what else can I try?
I have a Samsung model number UN55HU6950FXZA with some black vertical lines varying in size in the middle and on both sides of the screen that stay in the same place all the time regardless of the input source. All of the backlights appear to be working properly. Ive carefully disconnected, cleaned and reconnected all ribbon cables etc and the problem remains. Can you please offer suggestions on what is most likely the problem? Any help would be greatly appreciated. Thank you!
Liked the video.. I have a curved Samsung UN65h8000af and have no picture. It is just a black lit up screen. I can hear the click sound from the volume being scaled up or down but cannot get a source to show image or sound. Please help!!!!! Thank you!
is www.shopjimmy.com down? I cant access the page at the moment.
I have a question, I bought a veon tv and the model is sro9111. The backlights and sound work but it has no picture. I am assuming it could be the t-con board. So I am going to get one and replace it myself. However, I cannot find the supplier for VEON. It remains a mystery so the only way I can get the part for it is to go through the place that I purchased my tv from. What I want to know is can any t-con board work for my tv model? Other information I found out when searching on Google was and I quote "The VEON range is manufactured in China using the same components as leading brands such as Samsung, LG and other large LCD/LED manufacturers", Sep 26, 2011.
What do the two ribbon cables in the bottom connect to? What do they do?
Hey, I have a Samsung UN60H7150. It's about two years old. Audio works,
inputs work, and picture shows, but vertical and horizontal lines plague
the screen with a red-pinkish tint in 2 areas on the same side of the screen. Does this sound like the T-Con? Any confirmation would be great thanks.
I have a white line going vertical about 9 meters wide. I thank it appeared because my cat sprayed on it. What do you think that I can do to fix it. Its a brand new Samsung 65 in curved 4k tv
Goodday sir,you have available of tcon samsung 60inch model
I have a Samsung un55d7000lfxza it has sound and dim background light that lightly changes when switching through input button. would this be the same problem? thank you.
Hey, I have a Samsung UN46B7000. It's about two years old. Audio works, inputs work, and picture shows, but vertical and horizontal lines plague the screen with a red-pinkish tint. I watched a few other videos and it sounds like the T-Con? Any confirmation would be great thanks.
How much are those T-con board for that size Samsung: 60 inches?? Where can I order one??/On line/ebay?? Thanks =)
Hi I have bought a tcon board from your site and the replacement board kept giving me the turn on chimes but never turned on. I called the website and they sent me a replacement and now it's doing the same thing. What could I have done wrong?
I have a Sharp Roku ready TV model LC-50LB371U. Today the picture went black with audio. Prior to this happening, the top of the screen was fading but it was hardly noticable. At this point, would it be the T Con board?
Hello, I have a SAMSUNG UN50M53002AFXZA that does have the backlight LED strips working , put does not power up / start when plugged in. I have purchased all three boards (PSU, Main and T-CON) and after replacing them, still no power up... What can I do to troubleshoot, TV is open and multimeter is ready to go!
Where do you recommend to buy a T-con from?
Hello Jimmy-
We have a Samsung LED that had sound and backlight, but no picture. Through you videos, we diagnosed and replaced the t con board. Now, there is a picture, but it is very faded and faint. Where should we go from here? Thank you very much. -amy
Luis Castellanos This sounds like a TV panel (TV Screen) problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com
i have 46 inches philips 2010 model its t con board is to be replaced . but i contacted the philips tv they say as the warranty is finished and the tv is old so they canot help. how to get the t con board 46
Hello, I have the UN60FH6200FXZA and have no backlight. I do have sound and picture using the flash light. I have been searching for the LED driver/inverter locattion for this model. I am wondering if it is built in to the power supply board.
Hi, we have an LG 47LN5400-UA BUSYLJR. The tv has sound but no picture. I have performed the flashlight test and I do see images on the screen. Can you help diagnose the faulty part?
+jlawhead36 Try all repairs and troubleshooting at your own risk. This sounds like a problem with the actual LEDs inside your TV. These LEDs are replaceable, however it is recommended they are replaced by someone with the proper experience and training. When replacing the LEDs, the TV panel can get damaged. If the TV panel gets damaged, it is not repairable. Click this link to replacement LEDs for your TV model number: www.shopjimmy.com/catalogsearch/result/index/?cat=299&q=47LN5400-UA Be sure to match the panel information necessary to ensure you have the correct replacement LEDs.Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com
Hi Jimmy,
I have a 3 1/2 year old Samsung TV UN60ES6500FXZC The screen is covered with color vertical lines and you can barely see the picture behind the lines. The sound is OK. Would the T-Con board fix this problem. Thanks
I have a Samsung smart led tv model # un46h5203af the screen went black but it has sound and with flash light can see image but can not change channels replaced power supply with led driver on it but still the same do I need to replace the t com booard o the main board as well
Hello Shop Jimmy. I have a Samsung LN32D403E4D. Whenever the TV gets hot, it starts to show double images. I have went ahead and replaced the Main Board, but still having the same problem.
I await your suggestion for this problem.
Thanks in advance.
Robert Robinson This sounds like a TV panel (TV Screen) problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com
ShopJimmy.com Thanks for your reply. So in this case it makes no sense replacing the T-Con Board?
I have a Samsung 46 inch model number UN46C6300SFXZA that has a horizontal black line down the middle of the screen can you please recommend a fix.
Hi thank you for the videos. My tv is a samsung 46 inch LED. While watching tv either from my cable box or fire stick 2 different inputs both hdmi, the tv will flash and go to a white screen with sound. Sometimes it even goes black with no sound and the power button starts flashing. I have to unplug it just to be able to turn it back on.
Oh, sorry. model is UN46F6300AF
what about for a bright horizontal purple line at the bottom of the TV?
hi Jimmy shop, my name is NORM , I was able to replaced the main board of my 42 led smart LG tv , but sad to say it's not working yet . Please send me advise . Than you
I have a Samsung model UN39FH5000FXZA. It has sound but no picture. Did the flashlight test no back lights replaced power supply board. Still no backlights. Do I need to replace the backlights?
Hi I have a Samsung 65 in curved LED tv. Model # UN65HU7250F. I was watching a show when the picture went out but the back light is still on and I could still hear sound. Is this the Tcon board and if so do you have that part for sale?
Thank you
Sara Alexander were you watching dirty movies??
Hi suddenly have this vertical and horizontal lines. And now its completely black. It’s still has its audio and backlight. Do you think replacement of tcon board is the solution?? Hoping for a response. Thank you in advance 🙏🏻☺️
Where i can buy tcon like this?
Hi I have a Samsung ks8000. Problem is I have black screen with colorful vertical lines going straight across from top to bottom. Can you please tell me what's the problem and solution. Thank for your response.
can i fit a sony t con board on a samsung , same screen size?
Will this apply to the 5 series also? if I shine flash light I can see faint picture. perfect sound, that's the t con board correct?
will this work for the UN60ES6100P
last night i was watching tv and the screen just turned like rainbowy you could see the picture still just very tinted after switching inputs from tv,xbox to computer the color stayed the same i turned the tv on the next day and now its just a white screen. sound still works would this t-con work? the video said all black screen?