Це відео не доступне.
Перепрошуємо.

2002-2007 Audi A4 B6 B7 Instrument Cluster Pixel Repair

Поділитися
Вставка
  • Опубліковано 19 кві 2018
  • Audi A4 (B5), A6, Allroad Pixel repair service - goo.gl/DEtpnK
    Audi A4 (B6, B7) Pixel Repair Service - goo.gl/nesDP2
    Audi TT MK1 Pixel repair service - goo.gl/aXx1FR
    Audi TT MK1 Replacement LCD Display - goo.gl/ScjaUC
    Audi A4 (B5), A6, Allroad LCD Display - goo.gl/ScjaUC
    Pointer Motor for Fuel or Temperature gauge for Audi TT MK1 - goo.gl/oXB6sD
    Below is a list of the parts and tools we personally use in our facility:
    ✓Pixel Repair for BMW:
    ›Carbon cable for BMW E38, E39, E53 - goo.gl/ysSLcK
    ›Silver Cable for BMW E38, E39, E53 - goo.gl/twYvJ2
    ›LCD Display with silver cable attached for BMW E38, E39, E53 - goo.gl/YSR7dU
    ›40w Soldering Iron with T-Tip - goo.gl/drCrwJ
    ›T-Tip for 30w Soldering Iron - goo.gl/p9ppYK
    ›Backlight Bulbs for the display - goo.gl/f1rvvy
    ›Pointer Motor for Fuel, Speedometer, RPM or Coolant temperature - goo.gl/hoV1EL
    ›Pointer Motor for MPG, L/100km or Oil Temperature - goo.gl/7dFjFj
    ✓Pixel Repair Parts for Audi:
    ›A4, A6, Allroad - goo.gl/Toa6U8
    ›TT - goo.gl/mhWUUu
    ✓Soldering equipment we personally use in our facility:
    ›Soldering station - amzn.to/2pAhV3V
    ›Soldering tip - amzn.to/2FZlZox
    ›Desoldering tool - amzn.to/2G1mo9Y
    ›Fume extractor - amzn.to/2FZtNqC
    ›Leaded solder - amzn.to/2I2h2bl
    ›Power supply - amzn.to/2pzDami
    ›Multimeter - amzn.to/2uizDOe

КОМЕНТАРІ • 60

  • @dimitrisk4952
    @dimitrisk4952 5 років тому +2

    As i can see in the video , for this specific cluster of A4, there is no need to solder anything . there is a zif socket . Do you ship this LCD worlwide ?

  • @ktyeboah
    @ktyeboah 9 місяців тому

    Hi it seems I have a short on mine. It displays fine every now and then when o first start the car hit as soon as I put the car into gear or open a door it goes out :/ any ideas ?

  • @lusionalaravie3558
    @lusionalaravie3558 3 роки тому +1

    thanks for the video was very helpful! was wondering if you'd share the music with me? its so terrific. thanks again :D

  • @nathanmoore620
    @nathanmoore620 Рік тому

    Hi where can the new replacement lcd be bought. From the uk. Many thanks. Great video

  • @rbalicoco
    @rbalicoco 5 років тому +3

    What do you call that procedure that you're doing with the speedo and rpm needles? How important is it to do it exactly how you did it?

    • @Hoch134
      @Hoch134 3 роки тому

      It's a stepper motor. Likely what he is doing is to set it way below 'zero' so it will recalibrate. If you see that the needles move in position you're ready to go.

  • @ktyeboah
    @ktyeboah 9 місяців тому

    Do you have a shop where I can bring my car to get this done ;) ?

  • @bernhardrichter486
    @bernhardrichter486 4 роки тому

    Can you just fit the lcd display on the pixel cluster or do they differ

  • @DiffusionDuude
    @DiffusionDuude Рік тому

    Is it possible to just change the whole dash board ?

  • @thomasliontos6005
    @thomasliontos6005 3 роки тому +3

    spectacular job!!! very nice and neet ! were do you get the parts from

  • @paulharris2078
    @paulharris2078 10 місяців тому

    Where can i buy the pixel cluster to replace please

  • @AMELAMCJE
    @AMELAMCJE Рік тому

    I replace my lcd but i dont figure out how to back meedless back...i dont use a jack to enter them.i right possion i just back them vouple of times and point them about mm from first line...and now when i am braking they dont going back good...they are backing slowly and stoping...? Can you help me?

  • @craigsolomon8292
    @craigsolomon8292 3 місяці тому

    Hi.i know this is an old video.thanks you for the information.
    Wandering id you can gimme info on what pin or wire I should use for RPM signal on an Audi b7

    • @HETPEZB
      @HETPEZB  3 місяці тому

      I would guess, that this would be a part of the communication bus/line, not a separate RPM wire.

    • @craigsolomon8292
      @craigsolomon8292 3 місяці тому

      @@HETPEZB can bus.can I just tap into one of these wires

  • @jamesdyer7535
    @jamesdyer7535 4 роки тому

    how much is just the replacement LCD scene for 2003 audi a4 1.8t?

  • @brunorotella1012
    @brunorotella1012 3 роки тому

    Can you install an autoradio 1din for Audi A4 B6... Tank you for share

  • @francescopiergiovanni9650
    @francescopiergiovanni9650 3 роки тому

    Ottimo e istruttivo

  • @claudiomarcaurelio
    @claudiomarcaurelio 4 роки тому

    Fine video, i like to know the pins you used for the electric power, and i need to understand the procedure you make with rpm and km clock hands......thanks

  • @kkoo809
    @kkoo809 4 роки тому

    Hello my friend you think the Instrument cluster controls the climate control light, the alarms, the indication signals, key not unlocking nor locking via remote. If you could reply back would be a great help. need to find out if my one needs resoldering as mentioned above neither of those work lol. The button to change the display ain't working an also doesn't let me sync keys using the method from manual book lol

  • @seabmoncao
    @seabmoncao 2 роки тому

    The display for Audi A4 B6 2001-2004 is the same as the one for Audi A4 B5? I'm from Portugal and I would like to know if the Audi A4 B5 fits also for my car please. The instrument cluster is identical to the one in the video.Tks.

    • @HETPEZB
      @HETPEZB  2 роки тому

      Nope, different display. B6 plug and play, B5 requires soldering.

  • @donaldmonsen1965
    @donaldmonsen1965 5 років тому +1

    I have an '01 A8L, the time/date and mileage recorder screens seem to fail from heat. Cannot locate a place to buy replacements. Where can I find them?

    • @HETPEZB
      @HETPEZB  5 років тому

      My wild guess is yank yard. Lot of A8 are there. Purchase the donor cluster and grab the screens from it.

  • @BdanBlue
    @BdanBlue 4 роки тому

    Hello, do the needles have positioning or it doesn't matter how you insert them it will reset to default position? Thanks

    • @HETPEZB
      @HETPEZB  4 роки тому +1

      You need to make a note to yourself the default position you removed them from.

  • @joonahanninen9579
    @joonahanninen9579 4 роки тому

    I have a audi a4 1.8t quatro avant b7 2004, can i get back my old kilometers if i do this? And i dont have the equipment needed so are they going to do these at audi repair shops or?

    • @HETPEZB
      @HETPEZB  4 роки тому

      Odometer is not affected. Easy repair. No need for a shop :)

  • @dundycbr23
    @dundycbr23 2 роки тому

    May u share how to make the workbench tester cable

    • @HETPEZB
      @HETPEZB  2 роки тому +2

      I went to the junk yard, found a connector, then googled few Audi forums for the instrument cluster pinout and soldered a couple wires. Been more than a decade ago.

  • @douglasamp46
    @douglasamp46 4 роки тому

    Hi, is there any way to change the color of those red leds to white or anither color?

    • @HETPEZB
      @HETPEZB  4 роки тому

      There is, but most likely not worth it.

  • @tywoodruff7533
    @tywoodruff7533 6 років тому +1

    Thanks for this video! I just replaced my screen and it seems to be a lot more dim than the old one. Do you think that is just the screen? Or maybe I didn’t get it plugged in all the way?

    • @HETPEZB
      @HETPEZB  6 років тому +1

      Ty Woodruff , it’s most likely the design of the replacement screen if you didn’t plug it all the way properly you won’t see anything on it. But since you see the information, but it’s more dim than the original - it’s just a way the replacement screen is.

    • @OneSinisterBastard
      @OneSinisterBastard 5 років тому +3

      A lot of used A4 owners don't know but there is also a cluster dimmer control. The `+´ and `-´ buttons to the left bottom of your cluster controls this. Some you just press and hold....some you have to click up or down. Try that.

    • @brandonspencer309
      @brandonspencer309 4 роки тому

      @Best Pixel Repair @Best Pixel Repair hey, if a couple of the "fingers?" or the connections on the board get lifted off during the removal of the old LCD Display is it possible too save or is the hole board shot??? Any help will be awesome!?
      Thank-you!

  • @macaylarobinson22
    @macaylarobinson22 4 роки тому

    Everything looks so fragile! At 3:55 I was like 😳😳 nope. Just gonna let my screen be faded, to scary to do myself! 🤣

    • @HETPEZB
      @HETPEZB  4 роки тому +1

      This one is actually one of the easiest clusters to work on :)

  • @jamesdyer7535
    @jamesdyer7535 4 роки тому

    nice video , is this a repair because of an intermittent LCD display, it only does it at times, other times it's fine?

    • @Hoch134
      @Hoch134 3 роки тому +1

      Heat seems to be the problem. For what I understand, replacing the screen fixes it.

  • @justfantastic444
    @justfantastic444 3 роки тому

    Nice ! can you change to BLUE ? 😎

  • @fastbiker20
    @fastbiker20 5 років тому

    Hello, there are three types of display. Red monocrome, color monocrome and the color LCD (black,red,yellow colored). Is it in all types the same way to repair it. Where i can buy that color LCD?

    • @HETPEZB
      @HETPEZB  5 років тому

      What I'm curious about - what is color monochrome LCD?

  • @djn612
    @djn612 2 роки тому

    Can i buy another cluster that has that screen colored, and just swap it with my screen that is just red letters? Will it work without coding or do I need to code stuff for it to work?

    • @HETPEZB
      @HETPEZB  2 роки тому +1

      I’m pretty sure that simple swap won’t work without a programming.

    • @djn612
      @djn612 2 роки тому

      @@HETPEZB thank you for the help

  • @88slimsergiu
    @88slimsergiu Рік тому

    where can I order a new color pixel for Audi a4 b6 1.9 tdi?

  • @yeicobbelfort2470
    @yeicobbelfort2470 5 років тому

    Good job, but you could have cleaned it before reassembling it because it looked dirty

  • @auronjashanica172
    @auronjashanica172 4 роки тому

    Is there anyway to remove that red background on the cluster screen?

    • @HETPEZB
      @HETPEZB  4 роки тому +1

      You can replace backlight LEDs to whatever color you want.

  • @alvinlai8717
    @alvinlai8717 5 років тому

    Hi Sir, Nice video. I going to repair my lcd pixel soon. Just wonder is it the same way. My lcd pixel is black blackground white wording.
    Skoda octavia year 2006 ,fsi 2.0
    Please advise.
    Thanks.

    • @HETPEZB
      @HETPEZB  5 років тому

      We don’t have Skodas here. Can’t advise.

  • @OneSinisterBastard
    @OneSinisterBastard 5 років тому +4

    Oh..... So buy a new one. Got it.

    • @HETPEZB
      @HETPEZB  5 років тому +1

      Why? One of the most easiest repairs.

  • @gustavgretel7032
    @gustavgretel7032 3 роки тому +1

    Annoying music

  • @scorpioblue4510
    @scorpioblue4510 4 роки тому

    This is a Replacement not repair...anyone can do that !!!

    • @HETPEZB
      @HETPEZB  4 роки тому

      Was the cluster replaced? Think before you about to say something, otherwise some other may laugh..

    • @scorpioblue4510
      @scorpioblue4510 4 роки тому

      @@HETPEZBYou write in title Instrument Cluster Pixel Repair, but is Instrument Cluster Display Replacement. It is not a same thing. So, no one talk about instruments cluster replacement.

    • @HETPEZB
      @HETPEZB  4 роки тому +4

      In the beginning cluster had missing pixels. After the repair - no missing pixels. Was cluster repaired?