How to Remove Instrument Cluster (Speedo Speedometer) - Audi A4 S4 RS4 - B6 B7 - TOTAL TECHNIK
Вставка
- Опубліковано 7 чер 2016
- This video will show you how to remove the Instrument Cluster (Speedo/Speedometer) on your Audi A4, S4 or RS4 (B6 and B7) 2001-2008.
Looking for tools?
www.totaltechnik.com/selectstore
IMPORTANT LINKS:
1) How to remove Lower Dash Panel:
• How to Remove Lower Da...
Video by TOTAL TECHNIK. - Авто та транспорт
Looking for tools?
www.totaltechnik.com/selectstore
Thanks very much, fixed the buzzer with a new one from Ebay. The buzzer was broken for 4 years and has resulted in 2 callouts for the AA. Came across this video, and found out how easy it is to get the cluster out and fix a new buzzer.
Only problem was putting back in again, it took a while to work out that the wire from the green connector was getting stuck behind the right screw hole.
Thanks very much, saved me a fortune.
Awesome - that's what we like to hear!!! Our content is designed to save people money by enabling them to do the work themselves that maybe they would not have the confidence to do/try otherwise. Glad you got the job done! If you'd like to buy us a drink in exchange: www.paypal.me/totaltechnik
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hi!
Thanks for all usefull tips about Audi b6/b7!
Keep on going with good work!
Thank you - we will!
Please support us: subscribe to our UA-cam channel and spread the word!
brilliant - thanks very much for this and the associated under panel removal video - used them to replace the broken warning speaker in the cluster, after yet another epsiode of leaving the lights on
Excellent, glad we could help you out!! :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Nicely done ✅ Audi 👑
Hi there i`d like to ask that is possible to replace only the clocks between clusters i mean i`ll need to replace only temp gauge/clock, thank you!
If I buy a eBay cluster will it display the KMs already I have or the new one. Is it strigt swap ?
Where is the cambus located on a4 b6?
Thanks.
,wow! Thanks
Welcome :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Do the miles stay the same as before or do you have to change them on the speedometer
If I bought a s4 cluster for my a4 2008 does it hook right up or will I need to take it to a dealer to have them program it to my car?
HI your videos are very useful! do you have a video on how to remove the front panel too?
Thank you, much appreciated! When you say 'front panel' which panel exactly do you mean please?
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@TotalTechnik dashboard
Hay algún orden para la desconexion y conexión de las clavijas azul y verde?he leído que si no se hacen en un orden sale el error safe,y me gustaría asegurarme pues quiero desmontarlo y me da miedo liarla,gracias
hi Man, it ´s possible install painel audi s4 b6 in audi a4 b6?
i want to replace the speaker in the cluster, if i disconnect the clocks, will they need coding back in?
Hi. Do you know how to remove rear shelf in audi a4 b6 saloon ? Thank you.
Hi there. Yes, indeed we do :-)
It would be completely off-topic to discuss in details here as this video is for the speedo removal. We will be doing a video on the rear shelf removal in the saloon before too long actually.
We're filming a complete headlining removal video series for the avant, and also the saloon (which will include the rear shelf as although not part of the headlining technically, many people need to change if they are upgrading their headlining colour).
Some tips (from memory, it's been a few months since the last one!): the C pillar trim passes through/interlocks with the rear shelf, so those usually have to come out first. Remember the sub speaker, and also the high line brake light at the rear!
Sorry we can't be more help right now, but look out for the official video coming soon.
For others reading, sorry to go off-topic :-)
Hey guys! Do you need to program the new cluster, or will it have the same info as the old one? Miles, service etc..
Hey there
I've not done a refit with a different unit personally TBH, but from my understanding the cluster retains the information such as mileage etc and so it would change to the new information, additionally I'm pretty sure it must be coded in (not plug and play).
Quite a few people have done this mod (for example changing speedo on A4 to S4 or RS4 versions to get the nice S4/RS4 logo on the dials) and may be able to confirm some of the finer details for you - if you're reading this then join in!!
If it's something you are seriously considering then I'd do a bit more research. Some Google searches should bring up some links on forums etc from people who have done it.
Be sure to support us - subscribe to our channel and spread the word!
2 screws, easy as that! I'm right in saying a common fault lies within the immobiliser module located inside the instrument cluster?
Nope those immobilisers are good and not faulty
Hi
I’ve got a Octavia vrs 2011 & I can’t remove the instrument cluster.
I’ve taken out all the bolts & only have a small amount of movement,sometimes seems to be holding it tight in place but I can’t see what it is.
Any help,advice would be great?
Thanks
Hey there! I'd drop the panel down below the steering wheel so you can reach up from underneath and push it forward. Sometimes they can be quite stuck in there, just be sure you definitely got all the screws ;-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Hello, on my s4 the is dust in the glass of the instrument cluster is there are way to remove that?
Hey there!
Not easily, no. You would probably need to (carefully!!) open it up, take it apart and clean it that way.
Are the clocks coded as hot spare ones n need to change mind as middle screens broken
Generally, yes there are unfortunately.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Is there a way to remove just the plastic glass so I can clean it?
I don't believe so, sorry about that. You'd have to take it apart I think to remove the ABS clear front, and so still have to remove it. You are better off cleaning it in situ with a decent cleaning product (glass cleaner can work well).
Please help support us: please subscribe to our UA-cam channel, give our videos the thumbs up, and help spread the word!
Hello, is it possible to get that s4 look cluster?
Absolutely! You'll need a new S4 speedo - you can pick them up used on eBay for reasonable money.
And of course it will need to be coded in once fitted also.
Best of luck!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Please ensure you subscribe to our UA-cam channel.
2) Please give our video's the Thumbs Up on UA-cam.
3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: donate@totaltechnik.com
Thank you for your support!
When you put a new cluster in does it need programming?
Ignore me I read your response to the same question bellow. Thanks
No problem :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Can you change the A4 cluster into S4?
Yes you can, but usually it will need to be recoded to the car.
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Damn... that’s a big job. Really glad audi has to do it for me, for free. 😂😂😂
Ahh - the beauty of the warranty :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik
2) Please ensure you subscribe to our UA-cam channel.
3) Please give our video's the Thumbs Up on UA-cam.
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!