BUY the New 2021 Scorpion DC here (They’re Selling Out Fast!) ⬇️ Shimano Scorpion 21 DC 150HG RIGHT amzn.to/2UZXlfR Shimano Scorpion 21 DC 150XG RIGHT handed baitcaster reel amzn.to/3wdTAR2 Shimano Scorpion 21 DC 151 LEFT handed Baitcaster reel amzn.to/3qOwjDZ
I have fairly decent bass pro shop model low profile baitcaster that has an 8:5:1 ratio and I love it but lol it's tedious when fishing for crappie and reeling slow .. I know that baitcaster aren't really ideal for crappie fishing but I love using them because they're just satisfying to use. Closest I can get to fly without a fly rod and I'm not trying to cast a fly reel into the brush for crappie and bluegills. I use it for everything really lol mine has 20lb drag and I use it on a pretty heavy medium ugly stick. I have good cat poles with large baitcasters and I use the heck out of them but I always bring my low profile with me to get into those sweet spots that I can't aim well at with the big ones. Love it and it cost me $130
Good video, very informative; just a word of advice, I noticed you adjusting your spool tension to the lure. With a DC reel this is not needed, you simply adjust the spool to remove the side to side play, the IDC5 system will take care of the rest as long as you have it set to the correct lure weight. Same thing with the older IDC4 system, just set it to the correct line type/wind conditions.
Hey bud. Quick tip. You don’t need to loosen up the tension knob per bait with the higher end reels. All you have to do is loosen the knob just enough for the spool to have a little play and tune with the dc brakes and you are golden. This applys to that high end daiwa. The knob is hard to reach because the knob is preset from the factory
I got the same one in the LH. Took 2 months to come. The wait was agonizing! But we'll worth it. Casts a mile and it is so smooth. My favorite reel to date!
Some people claim that if you get spoiled by a big fish and your line is tied threw the holes in your spool then it could potentially warp the spool, but I've never had any problem with this at all but your guess is as good as mine my friend. I would say just keep doing what you do because I do the same thing when I spool mine. Awesome episode btw! I love the looks of the new scorpion🔥
I just got the 21 scorpion 300HG MD LH, the reel is a beast! I’ve been eyeing this scorpion DC or the 18 Anteras DC. I’ve recently started fishing mostly bigger baits, but want to jump the shark on a DC reel. Nice review, I like the price point on this Scorpion vs the Antares. I’m not sure why, but I’ve avoided the curado all together🤷🏻♂️
Thank you brother for all of your reviews and tutorials. I’m fairly new to bass fishing and you have helped me out soooo much! Keep up the great content.
Dammit Wes! I just watched your video on the 2021 Daiwa Zillion and made that my last reel purchase. I love it but now you got me wanting the 2021 Scorpion too! Keeping up with reels is seriously like trying to keep up with the latest phone. haha.. I still like my 2020 Metanium MGL the best though. I can cast that directly into strong winds with no issues at all! Oh, and it is smooooooooth. Just like all other high end Shimano reels. Nice vid man.
When I tried tying the line through the holes on my caius it cut the 30lb super braid with a fairly light tug, if you ever run your line all the way out it's probably a lot more likely to break off of the spool like that.
I have 4 scorpions. I just wrap it around the spool, tie a square knot and put a small 1/2” piece of gorilla tape to hold it and spool it up. No problems and the reels have not failed once in 2 years. I have had some backlashes but those were my mistake by not adjusting for the wind.
The holes are for weight. The holes are on one side because the dc system it would change how it works if they was on both sides. You don't need to use mono backing if you tape the line to spool. I make sure to use one full wrap of tape to keep weight even on the spool. But braid can squish and get wavy if super thick so sometimes I will use mono backing because I don't need a full spool of braid. And instead of taking it off or using the opposite end I'll just add whatever amount more that I need but that's just preference. Just a heads up I have the 17scorpion and you can make it a micro module unit by buying the pinion and main gear from the curado mgl 70k. I got the hg like my scorpion was before but the mm gears sure make a difference and also you can add the worm screw bearing on the 17 as well as one in each knob. Now mine is micromodule and 10/1 bearing configuration instead of the stock 7/1. I know the 21 could also use one bearing in each knob and the main gear I believe does not have a bearing, For whatever reason but for the small money to get a bearing it's totally worth it. And I'm not 100% sure but the worm screw may be able to get a bearing instead of bushing also. It's so worth it.
Had go back and watch this video just got this reel 3 months ago Had it on Go to green rod and love it but just got the muscle rod finally because it hard get googan rods in Canada and Ontario so can't wait try it on it see makes difference
I use the adhesive strips that comes with the reel, and follow the diagram in the instructions. No tying to the spool. I haven't had any problems with setting the hook, no slips, no problems at all. BTW, loving the Subie.
Sweet reel! Cool video, but I gotta laugh at all these UA-camrs throwing high end reels on Googan rods. That reel deserves a Scorpion rod or an Expride. You will get a true balance and more out of your reel. Just an opinion, cool video.
This thing a beast. I had the slx dc xg. Return it and got the 21 scorpion xg instead. Can definitely feel the quality and a whole lot smoother. Also got it from Japan. The exchange rate for the win. So i actually got a better BC for like $10 or so cheaper hahaha
@@freshandsaltyjohnny I got my scorpion from Digitaka. Don't change anything. Like the bearings. The stock bearings it come with is already top notch. Should be good to go out of the box. I have two of them now. One is stock and one is fully APEC9 ceramic bearings. Drag clicker mod and high crank handle. To be honest, it's not worth the money. Stock is still nice.
I have used both uni and double uni knots and found that the single uni frays my line more so once I switched to the double my whole life changed man. You don’t have to listen I just found that it is what I prefer
With braid, you should add backing. Add 5 yards of mono so the braid has something to grip onto. With enough pressure, the braid could slip on the spool even if you went through the hole.
I'm feeling lucky! I got mine in 10 Days from Digitaka for 28,00yen =$260us , I have had it since May 10 also.( out of stock now) I also received the SLX DC 70 JDM version in 12 days for $159.16 from Asian Portal Fishing. (125 still in stock)
I use a hair bit of the tape from the line spool to hold the braid on the reel. tying it can make a small bump and an uneven spool. never needed a backing on a baitcaster, spinning ALWAYS use electric tape or some cheap mono for backing.
love the video's and the STI ( love mine), question im looking at the scorpion DC and the Alpha SV tw do you have any input on which is the best?. Cheers
I just got my 21 Scorpion DC 150HG and I love it. Odd that yours has "power grip" written on the handle, mine doesn't say anything. It also has some movement in the handle side to side, don't know if that's normal or not, would love to hear what you all think.
@@WestinSmith Yes hopefully I can get it fixed! The reel is amazing tho, Iv used it a good bit now and I have to say it casts so well. Its my first Shimano, I own a Daiwa Tactula 100, and this DC system is very cool technology. The number 2 setting can absolutly launch my Westin glide bait from a MTB box, 32g Swimbait. Im also useing Flouro and it feels great for your gridiron jigs and many other things like light Mepps spinnners. Also I thought about the "power grip" writting and it may be the XG model vs HG/Standard which as you said have longer handles which i was origicanlly going to get. Saw you way back on Googan channel and JonB, I enjoy your content and remember watching your Metenium DC review/Scorpion DC 2017 videos over 10 times in prepration to buying this DC reel and I dont regret it. I know you mentioned getting another reel, maby try that new Antares DC 2021 and maby a new spinning reel like the new Shimano Exsence 2021. Thanks for your feedback, and I just subbed. Tight lines!
that thing is sexy!! you'd be proud i put on my big boy pants and found some new ponds to fish. i normally fish forest preserves and public places. But i found two ponds outside of a bank parking lot and i slayed them!! i was waiting for someone to come give me the boot but kept hiding LOL
Now I think this is a way better reel then the Curado but rn it’s a little overpriced and I can’t find a 151HG right now so I think I’m gonna go with the Curado. Lmk how you feel about me buying the Curado instead. Also how long do you think this will be $350 and if there will be a 151HG model?
I’ve wondered that about tying on new string on a new reel too. I’ve done it to my black max, picsifun torrent and my abu Revo x with no issues yet. Are you still in the Austin area? I’m in Belton, TX, do you have any events coming up for meet and greet or something?
Hey Westin! I just received mine from Digitaka. It's weird out of the box I tried spinning the handle usually you get that "DC sound" mine has nothing at all. Is yours the same?
Probably best buying a reel like this as first year take care of it and have it for years to come .My honest opinion ! Really get what you pay for ! I've been through many reels in my life time and more you pay in most cases the better the cast , stronger , holds up.Even this reel is still a cheap compared to some other reels !
I want to know on the scorpion DC reel if I set the adjustment to W or A and I don't put my thumb on the spool it is impossible to have a blacslash Thank You
Doesn't effect it at all tieing on to the spool like that, on cheaper reels they can be poorly finished and sharp and cut 5he line, but not a chance in this case.
So your saying I should buy one to upgrade.... ugh damn you lol. I had been eyeing them. Beautiful reel for sure. Do you have any good places to go for jdm reels?
If you baying a reel what is for the JDM Market then the Manuel is in Japan, if you're baying in UK or USA then the Manuel is in English, that was easy isn't it.?
All my shimano reels could crap out tomorrow and I would go right back to them. 2 metaniums 4 curados 1 scorpion 2 slx dc and mgl all but one are xg and it's my crank bait reel. I have never had one crap out on me. I have 10 year old curados.
I feel the same way. Im a shimano man through and through. Ive tampered with other brands here and there and I do own 1 diawa tatula elite and 1 diawa tatula sv but none compare to what I get out of shimano reels. They last and they have a smoothness that I dont feel in other brands. I like my 2 diawas I have alot, but I love my shimanos.
Great reel i bought one …. Just be REAL careful removing the spool adjustment knob when cleaning …. the threads are too fine and i ran mine over…. had to send it in to re-thread . Otherwise GREAT reel
Those holes in the spool have sharp edges and will cut right through your line under load. I just wrap a 1/4" wide piece of electrical tape around the middle of the spool over my initial anchor loop pulled as tight as possible, and then start my spooling around that. The tape prevents slippage.
BUY the New 2021 Scorpion DC here (They’re Selling Out Fast!) ⬇️
Shimano Scorpion 21 DC 150HG RIGHT amzn.to/2UZXlfR
Shimano Scorpion 21 DC 150XG RIGHT handed baitcaster reel amzn.to/3wdTAR2
Shimano Scorpion 21 DC 151 LEFT handed Baitcaster reel amzn.to/3qOwjDZ
I got mine a few days ago and I love it, it is so smooth and it cats a mile
I have fairly decent bass pro shop model low profile baitcaster that has an 8:5:1 ratio and I love it but lol it's tedious when fishing for crappie and reeling slow .. I know that baitcaster aren't really ideal for crappie fishing but I love using them because they're just satisfying to use. Closest I can get to fly without a fly rod and I'm not trying to cast a fly reel into the brush for crappie and bluegills. I use it for everything really lol mine has 20lb drag and I use it on a pretty heavy medium ugly stick. I have good cat poles with large baitcasters and I use the heck out of them but I always bring my low profile with me to get into those sweet spots that I can't aim well at with the big ones. Love it and it cost me $130
Good video, very informative; just a word of advice, I noticed you adjusting your spool tension to the lure. With a DC reel this is not needed, you simply adjust the spool to remove the side to side play, the IDC5 system will take care of the rest as long as you have it set to the correct lure weight. Same thing with the older IDC4 system, just set it to the correct line type/wind conditions.
In the directions for this specific reel, it says to adjust for as needed
Hey bud. Quick tip. You don’t need to loosen up the tension knob per bait with the higher end reels. All you have to do is loosen the knob just enough for the spool to have a little play and tune with the dc brakes and you are golden. This applys to that high end daiwa. The knob is hard to reach because the knob is preset from the factory
I got the same one in the LH. Took 2 months to come. The wait was agonizing! But we'll worth it. Casts a mile and it is so smooth. My favorite reel to date!
Some people claim that if you get spoiled by a big fish and your line is tied threw the holes in your spool then it could potentially warp the spool, but I've never had any problem with this at all but your guess is as good as mine my friend. I would say just keep doing what you do because I do the same thing when I spool mine. Awesome episode btw! I love the looks of the new scorpion🔥
I hope i get spooled like that
I just got the 21 scorpion 300HG MD LH, the reel is a beast! I’ve been eyeing this scorpion DC or the 18 Anteras DC. I’ve recently started fishing mostly bigger baits, but want to jump the shark on a DC reel. Nice review, I like the price point on this Scorpion vs the Antares. I’m not sure why, but I’ve avoided the curado all together🤷🏻♂️
Thank you brother for all of your reviews and tutorials. I’m fairly new to bass fishing and you have helped me out soooo much! Keep up the great content.
Sick reel Westin, I think your rod and reel arsenal is amazing, always watch your reviews before I buy a new product
That thing is 🔥🔥🔥🔥
That Reel looks totally worth of buying. Awesome video Westin great catches really like that little buzz sound when you cast it.
Dammit Wes! I just watched your video on the 2021 Daiwa Zillion and made that my last reel purchase. I love it but now you got me wanting the 2021 Scorpion too! Keeping up with reels is seriously like trying to keep up with the latest phone. haha.. I still like my 2020 Metanium MGL the best though. I can cast that directly into strong winds with no issues at all! Oh, and it is smooooooooth. Just like all other high end Shimano reels. Nice vid man.
I have all 2020 Metaniums & was looking at trying the 21 Zillion. Are they close in performance to you?
When I tried tying the line through the holes on my caius it cut the 30lb super braid with a fairly light tug, if you ever run your line all the way out it's probably a lot more likely to break off of the spool like that.
I have 4 scorpions. I just wrap it around the spool, tie a square knot and put a small 1/2” piece of gorilla tape to hold it and spool it up. No problems and the reels have not failed once in 2 years. I have had some backlashes but those were my mistake by not adjusting for the wind.
Bought a 151hg today while exchange rates are low. I’m pretty excited
$213 lol
That’s legit!! Yeah these JDM’s are way low right now
@@reecethurman4714 same 💀 way cheaper rn.
I just put black electrical tape on the spool before I put braid on. The braid will have something to bit on. Then put braid on.
On the slx dc 1 is distance 2 is braid 3 is mono/fluro 4 is wind💪🏽🔥
That's a sweet reel! It's now on the list of reels to buy. But even more impressive is that leader knot!
I’ve had a shimano curado dc for 3 years with just a knot tied through one of the holes in the spool and I’ve never had any slip with braid
The holes are for weight. The holes are on one side because the dc system it would change how it works if they was on both sides. You don't need to use mono backing if you tape the line to spool. I make sure to use one full wrap of tape to keep weight even on the spool. But braid can squish and get wavy if super thick so sometimes I will use mono backing because I don't need a full spool of braid. And instead of taking it off or using the opposite end I'll just add whatever amount more that I need but that's just preference. Just a heads up I have the 17scorpion and you can make it a micro module unit by buying the pinion and main gear from the curado mgl 70k. I got the hg like my scorpion was before but the mm gears sure make a difference and also you can add the worm screw bearing on the 17 as well as one in each knob. Now mine is micromodule and 10/1 bearing configuration instead of the stock 7/1. I know the 21 could also use one bearing in each knob and the main gear I believe does not have a bearing, For whatever reason but for the small money to get a bearing it's totally worth it. And I'm not 100% sure but the worm screw may be able to get a bearing instead of bushing also. It's so worth it.
I always use tape never backing with braid never had slipping on the reel or braid
I’m getting my Scorpion DC today for $225 used hopfully it’s good
With the Currado and de Slv Dc we have 4 ajustement (1-2-3-4)
With the Scorpions DC we have 5 (1-2-3-4-W )
What is W and when we use it ?
Thank You
I believe the W is for Windy and replaces the “A” or “Auto” of the previous gen. It’s just for extreme situations I believe
That is a beautiful reel. I have a Scorpion BFS. A beautiful reel. I have it on a Phenix rod.
HELL YEAH JUST ORDERED MINE JUST NOW IM STOKED!
I did your Knot but idk if I did it good. But I can’t pull it apart. But I guess if I didn’t do it good then ima lose myself a fish😅
Had go back and watch this video just got this reel 3 months ago Had it on Go to green rod and love it but just got the muscle rod finally because it hard get googan rods in Canada and Ontario so can't wait try it on it see makes difference
Skeletonized reels let you tie directly to the spool ❤😊🎉
I use the adhesive strips that comes with the reel, and follow the diagram in the instructions. No tying to the spool. I haven't had any problems with setting the hook, no slips, no problems at all.
BTW, loving the Subie.
Sweet reel! Cool video, but I gotta laugh at all these UA-camrs throwing high end reels on Googan rods. That reel deserves a Scorpion rod or an Expride. You will get a true balance and more out of your reel. Just an opinion, cool video.
This thing a beast. I had the slx dc xg. Return it and got the 21 scorpion xg instead. Can definitely feel the quality and a whole lot smoother. Also got it from Japan. The exchange rate for the win. So i actually got a better BC for like $10 or so cheaper hahaha
Dude im about to do the same. That scorpion seems like its packed with features and overall a better buy than the u.s curado dc
@@freshandsaltyjohnny I got my scorpion from Digitaka. Don't change anything. Like the bearings. The stock bearings it come with is already top notch. Should be good to go out of the box. I have two of them now. One is stock and one is fully APEC9 ceramic bearings. Drag clicker mod and high crank handle. To be honest, it's not worth the money. Stock is still nice.
@@neihc1589 hey good to know dude. I didn't even know you could upgrade it like that but good info.
U just need to adjust the tension knob to eliminate side to side movements of the spool for this dc reel or u wont get the reel to max potential
I have used both uni and double uni knots and found that the single uni frays my line more so once I switched to the double my whole life changed man. You don’t have to listen I just found that it is what I prefer
Only time your line should be in the spool holes is to get the line pulled around so you can tie it around the spool
Love my 21 scorpion dc! Paired it up with a Dobyns Extreme HP
I have a Scorpion BFS. A beautiful reel.
I have that scorpion BFS also and I love it
With braid, you should add backing. Add 5 yards of mono so the braid has something to grip onto. With enough pressure, the braid could slip on the spool even if you went through the hole.
Even if you tied it directly to the spool through the hole? I don’t see how that can happen unless your knot came undone.
I'm feeling lucky! I got mine in 10 Days from Digitaka for 28,00yen =$260us , I have had it since May 10 also.( out of stock now) I also received the SLX DC 70 JDM version in 12 days for $159.16 from Asian Portal Fishing. (125 still in stock)
I use a hair bit of the tape from the line spool to hold the braid on the reel. tying it can make a small bump and an uneven spool. never needed a backing on a baitcaster, spinning ALWAYS use electric tape or some cheap mono for backing.
Also, the Alberto knot is an easy knot for leaders. check it out bud, its not difficult to learn and takes only a minute to do.
love the video's and the STI ( love mine), question im looking at the scorpion DC and the Alpha SV tw do you have any input on which is the best?.
Cheers
Great review... If you can only afford one, which model would serve best for all around use - HG or XG?
🤔🤔
Hg
@@LILCYPHER925 Thx!
The Essence DC SS has that Wind setting. Luv it!
This reels looks and sounds incredibly 😍
Do you happen to know the difference between the XG scorpion, BC and the HG
is the scorpion better than the curado dc? I'm looking for a DC for my Adrena. Can you throw baits under 10g with the Scorpion?
I just got my 21 Scorpion DC 150HG and I love it. Odd that yours has "power grip" written on the handle, mine doesn't say anything. It also has some movement in the handle side to side, don't know if that's normal or not, would love to hear what you all think.
I would think the side to side movement is a little weird, but I do explain the handle in the video
@@WestinSmith Yes hopefully I can get it fixed! The reel is amazing tho, Iv used it a good bit now and I have to say it casts so well. Its my first Shimano, I own a Daiwa Tactula 100, and this DC system is very cool technology. The number 2 setting can absolutly launch my Westin glide bait from a MTB box, 32g Swimbait. Im also useing Flouro and it feels great for your gridiron jigs and many other things like light Mepps spinnners. Also I thought about the "power grip" writting and it may be the XG model vs HG/Standard which as you said have longer handles which i was origicanlly going to get. Saw you way back on Googan channel and JonB, I enjoy your content and remember watching your Metenium DC review/Scorpion DC 2017 videos over 10 times in prepration to buying this DC reel and I dont regret it. I know you mentioned getting another reel, maby try that new Antares DC 2021 and maby a new spinning reel like the new Shimano Exsence 2021. Thanks for your feedback, and I just subbed. Tight lines!
bigger handle and knobs as its higher gear ratio
@@nathanrajevski the movement is normal just got the scorpion mine has it so does my slx dc completely normal
that thing is sexy!! you'd be proud i put on my big boy pants and found some new ponds to fish. i normally fish forest preserves and public places. But i found two ponds outside of a bank parking lot and i slayed them!! i was waiting for someone to come give me the boot but kept hiding LOL
Looks like an awesome reel! 🤜🏽🤛🏽. They don’t make it left handed in the XG?
Wait you should get the right handed in may already?
Yall should do a vid on the megabass magdraft freestyles they’re awesome
Great video as always! Could you do a comparison video between the 21 scorpion dc and the 17 scorpion dc?
I have older Scorpion DC, the black one, ace reel 👌🏻 also the Scorpion BFS, fantastic reels.
Now I think this is a way better reel then the Curado but rn it’s a little overpriced and I can’t find a 151HG right now so I think I’m gonna go with the Curado. Lmk how you feel about me buying the Curado instead. Also how long do you think this will be $350 and if there will be a 151HG model?
Yea that knot is great I use it all the time but I know it as a surgeons knot but it’s never broke at the knot
I’ve wondered that about tying on new string on a new reel too. I’ve done it to my black max, picsifun torrent and my abu Revo x with no issues yet.
Are you still in the Austin area? I’m in Belton, TX, do you have any events coming up for meet and greet or something?
Hey Westin! I just received mine from Digitaka. It's weird out of the box I tried spinning the handle usually you get that "DC sound" mine has nothing at all. Is yours the same?
11:01 to hear the reel
I just bought my first shimano reel the slx dc and when you said you feel the quality and yeah now I want more to replace my other reels
I do the same knot for leaders!!! So easy, also if im feeling lazy ill do 2 passes not 4or 5. It still holds up
Probably best buying a reel like this as first year take care of it and have it for years to come .My honest opinion ! Really get what you pay for ! I've been through many reels in my life time and more you pay in most cases the better the cast , stronger , holds up.Even this reel is still a cheap compared to some other reels !
I want to know on the scorpion DC reel
if I set the adjustment to W or A and I don't put my thumb on the spool it is impossible to have a blacslash
Thank You
Definitely going to give that knot a try!
Doesn't effect it at all tieing on to the spool like that, on cheaper reels they can be poorly finished and sharp and cut 5he line, but not a chance in this case.
So your saying I should buy one to upgrade.... ugh damn you lol. I had been eyeing them. Beautiful reel for sure. Do you have any good places to go for jdm reels?
LIKE ALWAYS LOVE YOUR CONTENT WESTIN SMITH 👍🤙
Never never never put the line through that hole, voids the warranty an can crack the spool according to rep.
Any tips to preventing line slipping if not tied to one of those holes?
@@SLA2014 I’ve never had line slip when I’m using mono or flouro. And whenever I use braid I put a mono backing on it.
@@byzone0632 ok thanks. yeah i was referring to braid, ill give that a try
Shimano explicitly says to use a little electrical tape to secure the braid, but yes not through the holes.
Then what's the hole for?
Was looking at getting a new reel, think you have me sold!
If you baying a reel what is for the JDM Market then the Manuel is in Japan, if you're baying in UK or USA then the Manuel is in English, that was easy isn't it.?
Just got mine it's awsome!
I found a gently used scorpion 17 DC 151hg for $225 shipped. Do you think that’s a good deal?
Youre not supposed to tie the line through the holes of the spool. Those holes are only there to make the spool lighter.
Sweet reel Westin
So are you going to sell the old Scorpion DC now?
Ok so 1 is distance 2 is braid and mono
3 is fluro and 4 is wind on the SLX DC
All my shimano reels could crap out tomorrow and I would go right back to them. 2 metaniums 4 curados 1 scorpion 2 slx dc and mgl all but one are xg and it's my crank bait reel. I have never had one crap out on me. I have 10 year old curados.
I feel the same way. Im a shimano man through and through. Ive tampered with other brands here and there and I do own 1 diawa tatula elite and 1 diawa tatula sv but none compare to what I get out of shimano reels. They last and they have a smoothness that I dont feel in other brands. I like my 2 diawas I have alot, but I love my shimanos.
Can you use it saltwater i had the 17 and it wasnt saltwater
Where did you buy?
Great video buddy Much ❤️
For me i would put around 10m or less mono/fluorocarbon for backing line, none slip Wes 💪
Shall we buy this reel?
Have you tested the drag power?
I tie my line to the holes too.
That reel looks sick
What different between antares and scorpion sir ?
How do you feel this reel stacks up to the 21 zillion sv tw?
My spool release acted up on the Zillion. I sold it
That reel looks 🔥🔥🔥
How do it compare to the curado dc
Curado dc is a waste money lol
Looks like a great reel!
Ordered along with a dobyns Sierra rod
Great reel i bought one …. Just be REAL careful removing the spool adjustment knob when cleaning …. the threads are too fine and i ran mine over…. had to send it in to re-thread . Otherwise GREAT reel
What a sick reel!
Yeah, it the same DC chip as the metanium DC reel. Only the 2021 Antares DC has the new chip remap.
Pair with 22 zodias...lit 🔥🔥🔥🔥🔥🔥
How do u not have pliers?
Would this reel work for throwing small to medium swimbaits. Like up to 4oz?
I wouldn't. Just get a 200 or a 300
@@brendanspencer2550 I have a tranx 200 right now. Was just looking for something with DC that can handle the big baits.
@@lost4real777 antares dc monster drive. $650.
@@brendanspencer2550 that price hurts my heart lol
@@lost4real777 trust me, me too 😂😂
Your rod support 50 lb pe line?
Yes those is just to lighten the spool only
Those holes in the spool have sharp edges and will cut right through your line under load. I just wrap a 1/4" wide piece of electrical tape around the middle of the spool over my initial anchor loop pulled as tight as possible, and then start my spooling around that. The tape prevents slippage.
Does anyone have a problem with the reel slipping on Hookset im using straight 14lb fluorocarbon
I like my 2017 scorpion dc better, even the whining sounds better on the older model and casts better imo
Yea they made the new one worse then the old one……🥴
Just use fingernail polish to secure the braid. Clean up during swap with acetone.