What clutch master cylinder set up did you use for the t56? I'm almost to that stage of my build and and any advice or help would be greatly appreciated 🙏
Nice project guys...I have an 86 iroc cream puff that I just bought a ls1 for so I need some help and some free parts would be WAY cool. I have pics if you want to see. Thanks and keep up the great work. Joe 86 iroc z28!
Hello,.I just built a resto mod with 6 speed tremec.Dual disc Clutch .Everything is brand new.. I have the a issue with the clutch slipping. Im try to figure out how to adjust it to eliminate the slip.?.
Adrian put here in metro Atlanta. If you know any mechanics out here please let me know. I bought a 85 two weeks ago and I'm looking to swap out rhe 350 that's already inside the cehicle.
Now that is some elbow grease! I wondered if you can get them in there together. I put my T56 trainy in after... that wasn't easy either. I kind of wish the front came off the car... slide in a lot easier. I still might take the plastic front off, but I don't think you can get the radiator support out without drilling welds. Just a thought. Good work! I am interested when swapping from sbc to ls.
I love watching videos like this! Im in the middle of my 92 rs swap right now with tubular k member. I did the holley three years ago and now will just need to change the harness. cool video and keep it up. Ill be watching for motivation
Do you have part number or is there a certain slave cylinder to buy to be installed or are they all the same?! Also how do you install the slave to the transmission itself? Leave the zip tie on the one end the slave and just bolt er on where it goes into the clutch fork? Or was your model different or what? Thanks!
Damn nice job. That's an idea I have been pondering for quite a while. Buy another 3rd gen then spend a bunch of money installing an LS1 and a t56 or buy 2001 or 2002 trans am WS6 that already has that powertrain in there. Very hard to decide
@@lsxltx thank you I appreciate you letting me know but I do not want to buy a car that is ready to go. I want a project. This car you built is flawless. There would literally be nothing for me to do but drive it.
Where do people start on these types of builds. Howd u guys learn to do all this stuff. Where does someone start in order to get to these level of builds working just part time on them???
Beautiful Camaro! Can't wait to see the outcome! I've been in love with third gen camaros since they first were introduced in 1982. I was 11 then. I own a 1984 Camaro z28 and often I'm approached by people that offer me money. I always say no of course! I've had my Camaro for 23 yrs now and it is my weekend driver! Keep up the good work guys!
Hey I have a 91 Camaro Z-28 5.7 and at the smog place that I took it tells me that the pressure is to high ?? I already fix what the every thing that the check engine test thing told New EGR - map sensor and the 02 sensor and I finally clean out the throttle body Can u help me a lil ?? Love ur video camaro looking nice 👍🏼
Nice! I have the holley hp on my third gen and I'm almost done with the wiring I'm having a little issue on where to hook up the alternator wire plug since i took out the factory harness, im trying to find out where to tap in on the fuse block or ignition. But i love what your doing!
Constructive criticism here: do not use music like that. It literally made my head spin after about 5 minutes in. Ruined the whole video for me. Other than that great job !
Digging it man, I've been planning on this exact build and found this
What clutch master cylinder set up did you use for the t56? I'm almost to that stage of my build and and any advice or help would be greatly appreciated 🙏
Nice project guys...I have an 86 iroc cream puff that I just bought a ls1 for so I need some help and some free parts would be WAY cool. I have pics if you want to see. Thanks and keep up the great work. Joe 86 iroc z28!
Do you know which oil pan you used?
Did the magnum fit in with the Hooker cross member? Mine is touching the top of the trans tunnel. Using the full Hooker set up.
Can you help me ? What clutch master cylinder did you use?
Excelente trabajo
Specifically which headers are those?
Did you have to modify the tunnel for it to fit?
Hello,.I just built a resto mod with 6 speed tremec.Dual disc Clutch .Everything is brand new.. I have the a issue with the clutch slipping. Im try to figure out how to adjust it to eliminate the slip.?.
Adrian put here in metro Atlanta. If you know any mechanics out here please let me know. I bought a 85 two weeks ago and I'm looking to swap out rhe 350 that's already inside the cehicle.
whose crossmember did you use for that t56 magnum? Does it have provisions for mounting the torque arm?
What mounts did u use ?
Wtf is on that pizza?.
.is that an old d100 in the back, are we putting a late model hemi in it or a ls? That thing is dumped
What are the cons of ls swap
-it's not rare so you aren't special for having one
If you don't care about that, everything is a positive. No cons
Best intro ever. Pizza beer and megadeth.
Now that is some elbow grease! I wondered if you can get them in there together. I put my T56 trainy in after... that wasn't easy either. I kind of wish the front came off the car... slide in a lot easier. I still might take the plastic front off, but I don't think you can get the radiator support out without drilling welds. Just a thought. Good work! I am interested when swapping from sbc to ls.
What all do you have to do to swap in the t56? Parts list?
I love watching videos like this! Im in the middle of my 92 rs swap right now with tubular k member. I did the holley three years ago and now will just need to change the harness. cool video and keep it up. Ill be watching for motivation
why not pull the hood or drop the K member and drop the conc on to it?
Do you have part number or is there a certain slave cylinder to buy to be installed or are they all the same?! Also how do you install the slave to the transmission itself? Leave the zip tie on the one end the slave and just bolt er on where it goes into the clutch fork? Or was your model different or what? Thanks!
I got my complete kit with everything needed from American powertrain. Hit them up and let them we sent you 👍🏻
Total cost?
Would it have been easier to drop the whole K member and then drop whole body on?
At 3:54 what size and name v of the bit did you used for the wire harness to work?
Y not pull the hood 4 more room?
I never pull hood on any engine swap unless absolutely necessary. Any extra steps is extra time is extra money.
That's kick ass!
Damn nice job. That's an idea I have been pondering for quite a while. Buy another 3rd gen then spend a bunch of money installing an LS1 and a t56 or buy 2001 or 2002 trans am WS6 that already has that powertrain in there. Very hard to decide
rob tucc thank you... this one can be for sale if your interested. Email is Hotrodsandmusclecarsdaily@gmail.com 👍🏻
@@lsxltx thank you I appreciate you letting me know but I do not want to buy a car that is ready to go. I want a project. This car you built is flawless. There would literally be nothing for me to do but drive it.
Where do people start on these types of builds. Howd u guys learn to do all this stuff. Where does someone start in order to get to these level of builds working just part time on them???
Will that l S1 and t56 fit in a 1994 Chevy S10 Blazer 2 wheel drive 5 speed?
Damn Right it'll fit. And it will be a hell of a lot easier than putting it in a 3rd gen camaro
Hi just curious..where are you guys from...I’ll bring the beer and pizza, thanks from Houston
Great Job putting the swap in your black 3rd gen. Camaro, Love the way its going!
How much? I need that. 1983 here. How much do i make the check out for
Beautiful Camaro! Can't wait to see the outcome! I've been in love with third gen camaros since they first were introduced in 1982. I was 11 then. I own a 1984 Camaro z28 and often I'm approached by people that offer me money. I always say no of course! I've had my Camaro for 23 yrs now and it is my weekend driver! Keep up the good work guys!
Hey I have a 91 Camaro Z-28 5.7 and at the smog place that I took it tells me that the pressure is to high ?? I already fix what the every thing that the check engine test thing told New EGR - map sensor and the 02 sensor and I finally clean out the throttle body Can u help me a lil ?? Love ur video camaro looking nice 👍🏼
Nice build cant wait ta see more....
American Muscle Ain't Nothing Better
Bad ass build fellas.
Nice! I have the holley hp on my third gen and I'm almost done with the wiring I'm having a little issue on where to hook up the alternator wire plug since i took out the factory harness, im trying to find out where to tap in on the fuse block or ignition. But i love what your doing!
U guys weren't klowning around
Saving up for my Ls swap.like you guys work, thanks for the vid
Bad ass setup
Nice build
Nice work
Awesome channel
You guys are working harder not smarter. Should have installed from the bottom. You have a lift.
Bad ass build man !!!!! 1 time for the third gen maro 💪🏾👌🏾💯
What are your wheels / tires combo (Sizing etc.)? Really liking them.
nice from the top install
Nice to see somebody doing the exact thing i am !
Badass camaro!!
Tight video
Great vid, thinking bout doing the same thing to my trans am
great job keep it up
Lol should look for a PBR sponsorship after that one.
One of these days
Some many bald eagles
I need that hoodie bro asap
Can't wait to fix my Camaro z28 3rd generation 1991
Ok
I can't believe no one complained about the music yet
Sweet I definitely need to build this my car is shot 🤣
awesome keep it up
winner contact me !
Hotrodsandmusclecars awesome Be right there
Hotrodsandmusclecars I contacted you through your email let me know .
123456 I Proved it lol
The live video sent me here. Ps weird as hell putting a face to the voice.
the music got really annoying
Merica
Constructive criticism here: do not use music like that. It literally made my head spin after about 5 minutes in. Ruined the whole video for me.
Other than that great job !
Nicr
Buet
Get rha t shirt
What's with those wheels? No no no. Stock 16s or IROC copies in 17 or 18...Please.
boooooo LS :(
gen1 sbc w/efi instead
Dave Martin gross
What clutch master cylinder conversion did you use? I have an 85 z ls2 t56 magnum. Any info would be greatly appreciated
Nice build