Minelab Equinox 800 Beginners Tutorial
Вставка
- Опубліковано 7 жов 2020
- Minelab Equinox 800 Beginners Tutorial is intended to give the first time user the instruction to get started on the right foot. Learning how to use the Minelab Equinox 800 is easier than you think. This beginners guide makes the Minelab Equinox SIMPLE AND EASY! I share a screen protector HACK as well as EASY START UP & OPERATION, including how to identify possible good targets and LIVE DIGS! If you have been looking for a video on how to metal detect with the Minelab Equinox 800, you have found it. You will be ready to take your Equinox 800 out and start finding treasure after watching this beginners tutorial.
Thanks for joining @Sod Busters Metal Detecting Happy Hunting.
Buy Me A Coffee www.buymeacoff...
SOD BUSTERS METAL DETECTING MERCH: sod-busters-me...
Get Your Metal Detecting Clock Here: bit.ly/3KUINpT
To Inquire about our HATS: E-mail sodbustersmetaldetecting@gmail.com
SOD BUSTERS METAL DETECTING GROUP: bit.ly/3Cw1j17
FOR ALL OF YOUR METAL DETECTING PRODUCTS, REFER TO THE LINKS BELOW.
DISCLAIMER: This video and description contains affiliate links. When you mention MY CHANNEL with your purchase, I will receive a small commission. THANK YOU FOR YOUR SUPPORT!
GET A FREE Sod Busters Metal Detecting Hat with the Purchase of any Minelab metal detector of $500.00 or more WHEN YOU MENTION "Sod Busters Metal Detecting"
FOR ALL OF YOUR METAL DETECTING SUPPLIES: outlawmetaldet...
RECEIVE FULL TECH SUPPORT WHEN YOU ORDER FROM outlawmetaldet... Tell them Sod Busters Metal Detecting sent you.
MINELAB METAL DETECTORS
EQUINOX 800: bit.ly/3s2Wszy
EQUINOX 600: bit.ly/3ixIjap
VANQUISH 540 PRO PACK: bit.ly/3xADl0X
VANQUISH 540: bit.ly/37CE1Z3
VANQUISH 440: bit.ly/3As5ucr
VANQUISH 340: bit.ly/3xGs0wE
WATER DETECTOR
EXCALIBER II: bit.ly/3fMoo5O
GOLD DETECTORS
CTX 3030: bit.ly/3fRaE9Y
GPX 5000: bit.ly/37zC0wZ
GOLD MONSTER 1000: bit.ly/3xzwNjo
GPX 6000: bit.ly/3xxhuHL
GPZ 7000: bit.ly/3iwYJQA
MINELAB PINPOINTERS
PRO FIND 35: bit.ly/2X8gnSh - Розваги
www.buymeacoffee.com/sodbusters
For more Equinox Tutorials go here ua-cam.com/play/PLjrtO2dCo3KHkjtqTrlcCWu4Q6OpFeyIL.html
For metal detecting supplies go to outlawmetaldetectors.com
I thought I would throw my two cents in no pun intended! I'm an electronic technician by career for 30 years and have been detecting for almost the same amount of years! The frequencies in a multi frequency detector are different because they optimize the sensitivity of the detector for the metal that you're looking for so silver and copper are more responsive to the lower frequencies like 4 kilohertz and 5 kilohertz etc the higher frequencies like 20 and 40 kilohertz are much more responsive to gold generally, in the past detectors were only single frequency units and were optimized for the best of both worlds but with disadvantage the detector may be very good at silver and copper but not so good at Gold or a detector maybe a higher frequency and be better for gold but not so much silver and copper your run of the mill detectors normally are optimized so that they're average at both ends of the spectrum but not optimum! Multi-frequency detectors like the equinox when running in multi frequency utilize all the frequencies simultaneously so that as you pass over objects in the ground the detector is able to process that information and give you the most accurate information over a wide range of targets! Selecting the individual frequencies has very little to do with interference or EMI and more to do with optimizing the detector for what you're looking for so if I'm going to hunt gold nuggets I'll be selecting 40 kilohertz and running in only that frequency but if I'm going to hunt silver and copper I'm going to want to run at five kilohertz. Hopefully this helps everyone understand the difference. The majority of detectors in the world for decades now have been single frequency units and they are very problematic in highly mineralized soil and salt which multi frequency machines handle extremely well. It's not to say that a single frequency unit cannot operate in highly mineralized soil or on salt the work around for decades was to decrease sensitivity to reduce falsing but unfortunately reducing sensitivity also decreases depth so it's a give and take! Only in the last 30 years or so has multi-frequency really taken hold and Minelab is definitely the pioneer in that arena! Multi-frequency allows the detector to operate in some very harsh soil and wetted salt conditions while at the same time giving you the most advantage over a wide range of targets in the ground. The fact that you can select a specific frequency to operate on based on what you're looking for is an outstanding option! Anyways I hope this helps a little bit! Happy hunting and best regards! Btw enjoy the videos very informative🙂
Flsandmaster that is very well put and I appreciate your feedback on that, it is good to have an idea what the frequencies are good for in the case you need them for a special hunt. Thanks again and I appreciate you watching.
Happy hunting
This guy explains it the best over all other reviews I have ever watched.
Thank you Kirk 😊
Totally agree!
agreed. I'm not new to detecting but I appreciate the slower pace. i went from garett to minelab.
Such a great review of the basics! Perfect for those of us who learn visually!
Why have beginners took this machine back ,it's because it's to hard to use
When ever possible Detectorist should strive to dig a 3 sided horseshoe shaped hinged plug so that the first lawn mower that runs over that spot wont suck the plug out of the ground. It also helps the grass to grow back, and before closing the plug and pressing it into back into the lawn pour any loose dirt back into the hole.
My thoughts exactly. Thank you for bringing this up.
Yup, I had a buddy that would do this. His holes would look great when you left, but when you came back three days later they were dead and brown.
Will do! Just getting started.
Well I'm a beginner, and this is another great "how to" tutorial. I've enjoyed your series of videos on the Nox 800. Thanks Larry for all of your help. Liked and subscribed.
Glad to have you along. Happy hunting
Great guide. Concise, clear, practical content. As a beginner it was exactly what I needed. Thanks.
Glad to help 😊
My E800 just arrived yesterday. Got it put together and set up. Watching your vids is a GODSEND! Between you and Relic Dirtyhands, I'm getting to understand this machine and this 'hobby'. I've never done this, except once when I was about 7 or so...for about a minute during some family reunion or something...that was in the mid-70's. So...yeah.. how about "almost never". ;)
..
Living in the Yukon Territory, I'm more apt to find gold than coins, so there is that! :)
That is awesome, feel free to find the Sod Busters Metal Detecting Facebook group also in case you have questions I can help.
Just my my 800 a couple days ago. The dealer was super helpful and showed me the basic setup. He also went over the use of the detector. Yesterday was my first try with it in the field. Dug junk, didn't find not one coin. After watching this video I feel much more prepared. For example the dealer never mentioned the scale when using the pin pointer mode. Also said to use park in #2 whereas you said #1. Thanks so much for giving me my confidence back!
Feel free to find me on Sod Busters Metal Detecting Facebook group and I can help you as you have questions there
Thanks so much for this video! As a rookie with the Nox 800, I've used several of your videos to get my settings the way I want them and I am heading out over the holiday for the first time (outside of my own yard). My parents house has an old one-room school house in their yard, so I am hoping that the 800 can help me cut through all the junk thats around and maybe find something cool. :)
Awesome! If it is real trashy set the recovery speed up to about 4 and swing slow. Feel free to find Sod Busters Metal Detecting Facebook group also
Best tutorial I’ve seen on the 800 plus you solved a problem I was having with my CTX. I’ll keep my sensitivity down from now on. Cheers Mate
Thank you for watching, I am glad I was able to help.
Hey mister I just purchased an EQX 800. I thoroughly enjoy your videos. Thank you for sharing your experience and hacks to make this process less intimidating.
💯Enjoying you're tutorial's, new to the world of metal detecting (cherry), you're series videos on the 800 has helped me in so many ways , i have been wanting to do this hobby for a very long time, i finally pulled the trigger and got my self the 800 for my 56th B-day! 🏴☠SEMPER Fi , God Speed! Happy Hunting
Congratulations!
Great video! As a new Nox 600 owner I didn't realize that the tone is more important than the VDI number. I'm coming from a White's M6 which I tend to rely on the VDI number, probability indicator, and a clear tone. This is a great video!
Thanks for watching
Great video, finally a video that cuts the BS and makes you want to get out and find some treasure. Well done . Ozzy down under, 8th June 2023
Thanks for watching
I am new to detecting, just put together my new minelab equinox 800 not even 2 hours ago. Your videos have been great in breaking down the basics of operating this machine. I'm excited to get out and get to searching! Thanks for the helpful videos!
Awesome Chris, you can also find me on Sod Busters Metal Detecting Facebook group. Happy hunting.
Thank you so much! I’ve been searching for a good tutorial and yours is the best! It has helped me understand my detector and sounds. 😁
Thank you Stephanie I have more tutorials as well and you can also find me on Sod Busters Metal Detecting Facebook group
Hello. Thanks for Sharing. I Went To The Park Today For The First Time With My Brand New Equinox 800, and I Was A Total Mess Just Trying To Guess How To Use The 800, I Sure Did Learn a Big Lesson To First Learn From Watching The Experts Like You On UA-cam. Now That I Watched Your Video On How To, I'll Try Once More Tomorrow Sunday. Stay Safe. 👍 I Own A Garrett AT Pro And AT Max.
Be patient, it is a great machine. You'll get it in no time
I like that screen protector idea 💡
Bottom of page 9 in the manual tells you this information. Still good info if you've missed it.
Just found this and I'm blown away by what is the best beginners instruction online I have seen for the Nox 800, I've had mine for over a year but have only taken it out a dozen or so times and never re-checked the set up etc; after the first time so have learned a few things (only checking on the solid sounds and the pinpointer graph coming together at the top for it to be dead centre!) and can't wait for the snow to go and the decent weather to begin as this has given me the buzz back to go and search properly this time! Thank You! 👍
Great, thanks for watching 😊
Thank you Larry, I look forward to purchasing my new minelab 800. You really did a good job explaining the basics.
Thank you and I have many more tutorials on the nox also. Happy hunting
bought a 600 model and could NOT find ANYWHERE a slow and thorough tutorial as this video. For instance, I could not understand why the face of the screen said EQUINOX and did not have the details of the screen protector. I didn't know that this particular protector would cover the equinox. Just simple things like that. I cannot tell you how much this and a couple other of your videos made me not feel some dumb trying to detect metal and figure out what all the options were about. I subscribed even though I may not need any further help, but your video is the BEST out there. Thank you, Art
Glad I was able to help Art. Happy hunting
Since watching your videos I’ve finally got better with my equinox 600. And I watched other people videos and did not get much out of them. Thanks for all you do
I am glad I was able to help. Happy hunting. Also you can find me on Sod Busters Metal Detecting Facebook group if you'd like
Been away for about a year Larry. Just popped in on a bad day. Good to see your videos again. Love them bud. You explain things so well. Thanks again Larry.
Thank you for watching 😊
I'm just starting out in metal detecting and considering this brand and model because of the great reviews it has. Thanks for your time to record the tutorials, not only on this video but for the others on Minelab Equinox 800 aswell, very well explained :)
You are very welcome
This is the very best video on this detector. I have watched. Thank you very much.
Thanks Jimmy I have more tutorials on my channel as well. Thanks for watching
Hi, great video you’ve made. Plain and simple instructions without bogging us down with technical stuff that makes you hit the stop button. I’m looking to get into this hobby and you explained things nice and clear. Well done and keep these types of videos coming. You guys over there must have too much money to just throw it away lol. There have been a couple of big treasure finds recently in the UK which gives you the encouragement to get a detector and get out there. Cheers and stay safe.
Thank you Donny I appreciate you watching
Your video is the best I’ve seen explaining how to start using the Equinox 800 as well as some general detecting advice. Good photography, great audio and overall presentation. I’ve been metal detecting causally since the 1970’s using BFO machines and currently have a Whites Spectra V3i. I am looking at the Equinox 800 mostly because it’s lightweight (2.96lbs) compared to the V3i which is 4.2lbs.
Thank you very much for the kind words. I am glad I can help. The Equinox 800 is an awesome machine. If you decide to get one come to outlawmetaldetectors.com and mention Sod Busters Metal Detecting and you will get a Sod Busters Metal Detecting hat with your 800 purchase as well as my support. Thanks for watching
I went out with my newly purchased eq 800 last night, fully charged batteries, attempted to skim over the manual but nothing sank in. Somehow still managed to find a few dollars ! And a tonne of bottle lids (typical post-weekend on an Aussie beach)....
kicking myself for not watching this til the following day ! Fantastic video, better than any manual. Thanks ! Can't wait to get back out with more of an understanding how to use this bad boy!
Awesome, Glad to be of help. Happy hunting
We just purchased an Equinox 800. Thank you for taking time to show us how the EQX works.
You bet. You can also find me on Sod Busters Metal Detecting Facebook group if you want
One of the best videos I've ever seen...Thank you
Thank you, be sure to subscribe as there is more.
Thanks! I bought an equinox 800 and I just wanted to know I was doing things right... your video is the best I've found.
Thank you, I have more tutorials on my channel as well
Greetings I just purchased my Equinox 800 glad I found you your explanation is straightforward thank you sir.
You're welcome. I have other tutorials on my channel as well. Thanks for watching
Love this channel, just got my Equinox 800 and found this, on holiday, going to do beach detecting where there are lots of tourists or have been in the past and very few if any metal detectors!!
When in doubt dig it out! Definitely the best advice right there Larry! Lots of cool tips for a beginner plus the screen protector tip is great. I will have to do it with the next one I apply. Take care & happy hunting:)
Thank you my friend. I appreciate you watching
I tagalog
Beginner here...about to head out...completely confident thanks to all your vids. Thank you!
Awesome good luck hunting
I am purchasing a new mental detector to upgrade from my Whites DFX. While searching for information I came across several of your videos and I certainly am enjoying the information that you share. I am now a subscriber!!! Thank you for the information
Awesome Alex, when you are ready go to outlawmetaldetectors.com let Dan know I sent you. If you purchase your detector there you will get our full support as well as a Sod Busters Metal Detecting hat if it is $500.00 or more. Let me know if I can help and thanks for subbing
Hey Man... thanks for the tutorial, i just got myself the 800 and figured I would watch a video or two before using it... Spot on with your advise and demonstration, appreciate it
Allan
Thanks for watching 😊
I have recently purchased the Equinox 800. I also have a Excal 1000 and a Fisher Aquanut 1280X. I have had both detectors for many years and both have well paid for themselves with the finds of the past. I have watched so many videos about the Equinox 800 and I think your videos are the best on UA-cam. My biggest problems is that I have watched too many and the advanced settings are a bit confusing from one video to another. I am a bit intimidated with my new Nox 800 detector. I have not assembled it yet...perhaps I should and just use the factory settings to start. It is so difficult for me to start a new learning curve since I am still attempting to master the older detectors I have. I guess a person really never masters any detector....so many variables...every hunt is a new experience. I just want to encourage everyone to just go out there, get fresh air and a bit of exercise and perhaps stumble across a fortune that everyone is looking for.
Thanks for your time and effort with your very informative videos. I wish all the best and happy hunting!!!
Al thank you very much for the compliment. The Equinox is very easy to learn and I have several tutorials on it. The preset programs are just fine to start with as you learn. Here is another video you might want to watch. Holler with any questions and find that hoard. Minelab Equinox 800: ua-cam.com/play/PLjrtO2dCo3KHkjtqTrlcCWu4Q6OpFeyIL.html
Thank you for the basic intro Park 1 much appreciated found a penny within minutes.
Awesome 👌
Hi I'm newbezz on this metal detecting, got my. Eq. Nox 800, your tutorial is soo helpful I don't need to spend reading on manual. Soo bless you done this here in UA-cam.. Happy digging 😊💪
Thank you. I have many tutorials on the nox so be sure to subscribe and you will find them on my channel. Good luck hunting
I've watched a ton of videos on the Equinox 800 and this is the best ! New sub here !
Thank you I appreciate you
Thanks for a great video. Very informative. Just purchased a new Equinox 800 today and looking forward to getting out there to see what I can find. 😃 👍🏼
Your display protector hack is a good one. I just bought a very nice used detector that has the display protector in Russian and it's installed upside down. I wish he would've watched your video first.
Hopefully you got the English version to put on
That was by far the best and easiest video to understand. Hopefully I can get some good hits around Hill end/sofala. Thanks heaps mate.
You're welcome. Good luck. Hunting 😊
Just bought my unit and looking forward to trying it out with my 8 year old granddaughter. Thanks for the great tutorial. I have my dad's old White detector and have enjoyed that on occasion.
Nice. Feel free to find Sod Busters Metal Detecting Facebook group as well 😀
Good video Larry. I would like to see a video that has you digging some junk targets and the tones that they make. Always enjoy and never miss a video you post. Thanks. Gary.
I will start adding some trash digs into my video so people get an idea of how that sounds. Thanks for watching
Every time I hunt it’s like Christmas morning!
I agree 😊
Very good video on getting started using the Equinox 800 detector. Also a very good hack on saving $$$ by modifying the screensaver. Thanks Sodbusters!
You bet, thanks for watching.
Nice Video Nothing better than getting baked and metal detecting
Just ordered an 800 today after having an etrac. This video was informative!
Thank you
By far the best tutorial I have seen so much better than the online instructions that came with the detector cleared up a lot of questions and concerns that I had with my new mine lab equinox
I'm glad it helped Terry. Good luck hunting
Thank you that was informative and helpful I’ve bought the 800 my first detector your film clip has helped me to learn the basics 👍🏻👍🏻
Thank you for watching. I have many tutorials on the Equinox 800. Feel free to find Sod Busters Metal Detecting Facebook group as well.
Just bought the 800 today never used any metal detector before was just told this is what old people do lol. So thought I would try to learn something about them
Lol well someone was not very informed 😅 this hobby is for all ages and you made a great choice with the 800.
Thanks so much for this video….Just received my W800 today…Will be checking back soon…
Nice, I have more tutorials on the 800 to help you learn
Really like videos that let's you hear tones and see vdi numbers along with dig.thx
Watching all your videos here in Cornwall UK, we are new detectors using an Equinox 600 & 800, thanks for the great tips 😎
Awesome, thanks for watching. You can also find me on Sod Busters Metal Detecting Facebook group if you'd like. Happy new year
Good video, except digging a complete plug out, will kill the grass and get you kicked out for future digs. I only make 3 cuts and flip the plug, keeping live roots attached to regrow. Also use a mat to put any dirt on.
Sorry Guys but leaving a hinge on one side of the grass does not make the rest of the grass on the plug grow back better. If it doesn't rain the day or night after your dig or if the ground isn't super moist/wet when you dig the plug then that plug grass is going to go brown......but it will grow green again.
Been watching videos on the equinox 800 now for a couple of weeks. I just got it Delivered today. I just git dine putting it together. Now I'm nervous to take it out and use it. It's to late now. Its dark and cold. I'll give it a go tomorrow. I feel like a kid on Christmas day.
That's awesome. You can find me on Sod Busters Metal Detecting Facebook group also
Larry, I noticed that you usually pinpoint in one direction, I pinpoint in two opposite directions. Like you use to see if your tone is the same in an opposite direction. Pinpointing in two opposite directions really helps me get the target centered in the hole. Hope this can help others as well. Great clip, keep them coming!
It just depends on the target, I listen to the target and can pinpoint according to the sound many times, other targets I may need to cross pinpoint.
Going to be getting my 3rd Garret Carrot and an 800. Having had an AT Pro, CZ3D, 2 V3i's..... just miss detecting and wanted the bugs worked out of the 800.
It's a great machine. Thanks for watching
Thanks for the great tutorial and for helping a novice get up and running!
Any time, feel free to join my Facebook group Sod Busters Metal Detecting. Good luck hunting 😊
Brilliant you have made this so easy to understand. I have the same set up as you with the garret pin pointer I find it easier to sit and use that to fine tune where to look. I will be heading to a friends property near Ballarat in Victoria Australia well known gold county soon and will be the first time using my new detector there as I have an old minelab I use on my property which is farming and rough. Thanks again for a great tutorial 😊
Thanknyou for watching 😊
Just saw this video and have learned enough watching it to finalize my decision to purchase the Equinox 800, Thanks I subscribed as well .
Awesome! Contact outlawmetaldetectors.com and we will be there to help as you need it.
@@SodBustersMetalDetecting I have looked at their site and will be contacting them soon to purchase . Thanks
@@stagemgr99 let Dan know i sent you, you'll get I little something with your purchase 😊
Had the at pro sold it last week and currently waiting on my equinox 800 to be delivered. I will be watching your tips on that detector.
Thanks Steve
Awesome, feel free to find Sod Busters Metal Detecting Facebook group also and I can help you when you have questions
Just bought an equinox 800. You explain things very clearly. Good job.
I'm looking forward to getting out!
Awesome, congratulations
I don't even own a metal detector, don't know how I landed on here, but it has me intrequed, great video, easy to understand, now I want one.
I can help you get set up, just let me know
@@SodBustersMetalDetecting I will do, thanks for the offer, appreciate it, thank you
Larry thanks for your help in switching from version 3.0 back to 2.0 the machine is running perfect as it did when I first got it .I'm sure version 3.0 works well somewhere in the world I could find no benefit to it here in Maine I updated my XP Deus to 5.1 and it improved an already great machine thanks again still learning the nox these videos really help
Great, I'm glad it helped. Thank you for watching.
Thank you for the info. My husband and I just purchased our first detector and set it up today. Going out for our first venture tomorrow morning
That is great. I wish you luck. Feel free to find Sod Busters Metal Detecting Facebook group to show your finds and to ask questions.
"Thaaat's a quatah."
I couldn't help it. I said that when you pulled up that quarter. :)
My Equinox 800 isn't even here yet and I've learned that a 26-27 could be a silver dime and a 29-31 a quarter. I called pull tab on the first target before you said it. I can't wait to get it outside and begin learning it. I've hunted with a borrowed AT Pro a bit for fun and I've used Gold Bugs in my work but this will be my first I've owned. I want to get it dirty. I also live a 2 minute walk from the beach. I'm excited. lol
I have to laugh. There is good "book learning" on YT and I thank you for your part in it. It is certainly need and very much appreciated.
Thank you I appreciate you watching
Ok :) I came "right back here" and got a 30+ from your tutorial :)
Nice what did you find
Thank you for the educational video and, the clear explanation. Never did this before. Under consideration
To purchase one. Thanks.
You're welcome. When you are ready , outlawmetaldetectors.com is the place to order from. Tell him Sod Buster sent you
Great video. 7 years detecting and still learning. You are right, i need to listen more and less looking at the screen. Good advice,,,,,Don,,,,
Thanks for watching my friend. Stay safe
Helpful video, clear concise and to the point, I am a new Minelab Equinox 800 user in central Europe
Thank you John, I'm glad i was able to help. Thank you for watching and happy hunting.
Great introduction for a newbie.
Thank you from New Zealand, I found it helpful.
I'm glad to be of help. Thanks for watching
Thanks for the Videos man. Just Upgraded to the Nox 800 a couple days ago and already found a silver and coins your videos have really helped. Keep On Diggin!
Awesome news. Thanks for watching
Thank you for explaining the basics of this nox 800 as I'm a deus user but I'm purchasing the nox in the next few days and now I know the basics, thanks again 😎👊
Awesome! If your interested you can get your Equinox through outlawmetaldetectors.com and let them know I sent you. If you do you get support for as long as you need as you learn your detector, also you will receive a Sod Busters Metal Detecting hat 😊
I like the saying "When in doubt dig it out" but another great one is "He who digs the most trash gets the most treasure." I'm looking forward to using my new Equinox 800 but I have to wait till spring. Great video!
Thank you. Good luck hunting
Thanks taking out my nox 800 for the first time today at dad's house
Good luck
Thankyou for your very informative intro to the Equinox 800 we just purchased it really helped. We will definatly be watching all of your videos..
Awesome, you can also find me on Sod Busters Metal Detecting Facebook group if you would like
@@SodBustersMetalDetecting ok thank you
G'day Larry, thanks for this video, i think I've watched it now about 4 times before I take my new Nox 800 out, very informative and easy to understand.
Down here in Australia we may fair a bit better in the coin stakes than you guys in the US as we have not only have our old, no longer used copper 1 & 2 cent pieces but we have silver 5c, 10c, 20c, 50c and Gold 1 & 2 Dollar coins so plenty to choose from so it wouldn't be that hard to pay for some of the equipment with findings although we also have a lot of rubbish bottle top and pull tabs although most canned drinks these days don't have the peel back removable tabs, they usually stay on the can and the tab folds down inside under the top. My main interest will be centred on the local parks and the popular beaches of Sydney.
The best of the best. Greetings from Miami.
Excellent video! we are exploring the purchase of a metal detector.
Awesome! If you are in the usa I can help you. Just go to outlawmetaldetectors.com and tell Dan I sent you
This man is amazing,thank you so very much for your advice my friend
Thank you! I appreciate you watching 😊
Impressive video. You demonstrate that you know this metal detector inside and out. I have found it to be a bit intimidating, honestly. I bought it, initially, to find gold in the desert. Obviously, its not that easy to get this thing out of the box and immediately start finding flakes and nuggets. Watching your video sure encouraged me to get this thing off my wall and into the dirt, so, thank you!!!!!!!
You bet I have many instructional videos on the Equinox, thank for watching
Great demonstration, Helped me get started
Thanks for watching
Exactly the type of video I was looking for before buying the equinox 800. Thank you, very helpful!
Thanks for watching
Got my 800 ordered from Dan today..thanks
Awesome! Feel free to find Sod Busters Metal Detecting Facebook group and I can help you there also
@@SodBustersMetalDetecting
Iv been watching your vids for several days and with the advice from a friend in addition to your info I’m on my way.
Solid tone, sounds like a great tip, actually heaps of great tips. I like the style you are demonstrating machine and settings. Have to sub.
Glad to have you on board. Be safe out there and keep an eye out for a soon upcoming giveaway 😊
Thanks for the help I will be using the 800 for the first time tomorrow and can't wait to see what find, also nice deer and bear mounts
Thanks for what You have done. You have THE BEST info for newbie 800 users. And really awesome info for all users! Thanks for taking your time and effort!
Thank you Mike I appreciate it.
Thanks for this upload Larry. I’ve not long had the 800 and this is an excellent resource to come back to as a refresher. Another subscriber here , all the best from New Zealand mate and happy hunting !
Glad to have you here. You can also find me on Sod Busters Metal Detecting Facebook group. I also have many more tutorials on the Equinox on my channel
Thanks for taking the time to make this and share. Very interested now in getting the Nox. Your guide was great. Good luck in your future hunting.
Contact Dan at outlawmetaldetectors.com Tell him I sent you
Liked the part about pin pointing. Gonna start doing that with my machine. Also like how easy his instructions are.
Thank you
Hi Larry you're definitely the GOAT can I fly out from the UK with my 600 and detect with you. That was the most informative video I have ever watched. I have subscribed, rang the bell and gonna hit the thanks button. Take care and stay safe mate. Tom.
Thank you Tom. I appreciate you. I'm glad it was helpful. Feel free to find me on Sod Busters Metal Detecting Facebook group as well if you want
Good imformation i have a nox 800 never really been on a hunt 'cause i did not understand it enought..
Great teaching brother
Thanks for watching
Good video. I recently purchased the Nox 800, and look forward to using it once the warmer weather arrives. I'll be checking out your other videos as well. Thanks.
Great video I am a beginner and this just encourages me to get going God bless
Awesome, thanks for watching
Just bought mine. Comes in a couple days! I am somewhat of a newbie and was going to go for a more mid range one for like $300-$500 but after doing some research putting out the extra few hundred looks to be well worth it.
Yes it is a great machine. Thanks for watching
Enjoyed the video Larry. I've been using a 800 for about two years now and love it!
Awesome, thank you. I appreciate you watching. Happy hunting my friend