How to Replace Radiator 2011-2019 Ford Explorer
Вставка
- Опубліковано 7 вер 2024
- Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARA...
This video shows you how to install a new radiator from TRQ on your 2011-2019 Ford Explorer. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obEa/1A...
• Pocket Screwdriver
• 19mm Wrench 1aau.to/oaaA/1A...
• 10mm Socket 1aau.to/obCD/1A...
• 13mm Socket 1aau.to/ob2e/1A...
• 5mm Socket 1aau.to/obCD/1A...
• 7mm Socket 1aau.to/obCD/1A...
• 8mm Socket 1aau.to/obCD/1A...
• Coolant Funnel Set
• Ramps
• Trim Tool Set 1aau.to/oat6/1A...
• Pliers
• 7/32 Inch Socket 1aau.to/ocU/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/ob2e/1A...
• Socket Extensions 1aau.to/ob2e/1A...
• Gloves 1aau.to/oaVk/1A...
• Safety Glasses
• Drain Pan
• Pick 1aau.to/oZ5/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
2013 Ford Explorer XLT, 4WD, 3.5L.
Great video. Hardest part was to remove and reattach the radiator to the evaporator panel and fidgeting with having the air panel drop into the radiator tabs. If not on a lift then need to crawl underneath to remove the 9 panel screws.
About 3.5 hours work. THANKS FOR THE VIDEO.
My appreciation for this well done video Mr. And many thanks
Great video 27 no mechanic experience it’s pretty simple I recommend getting hose clamp remover worth the $30/$40 and panel clippers are worth it as well $10 all at harbor freight😊
I also put all my screws in ziplock and labeled them
Also a plastic fastener kit all in total under $300
The bumper and grill assembly vary wildly between model years and trim levels, my 2015 xlt has none of the same fastener locations.
Just in case it wasn't mentioned. The two 8 mm that holds the air box looks identical to the two 8mm that holds the electric fan to the radiator. Yet the air box two are just a bit longer. Don't make the mistake and use the air box screw for the fan shroud. Will turn a good day to a terrible day. It will put two small holes in the plastic of the radiator.
Had rarely any mechanic experience until I had to do this, pretty hefty 6 hours but would not have been able to do it with out this video thank you!!
+@Thosemovieshorts Thanks for watching our video! 1aau.to/m/Shop-TRQ
You didn't address the ac line under the bumper on the passenger side
Great video but I see the wheels have been removed. Is this necessary to do for the project?
What a freaking nightmare