How to Replace AC Condenser 2011-2019 Ford Explorer

Buy Now!
New A/C Condenser and Receiver Drier Assembly from 1AAuto.com 1aau.to/ia/1AAC...
This video shows you how to install an AC condenser on your 2011-2019 Ford Explorer. A punctured, clogged, rusted, or damaged AC condenser will affect the efficiency and temperature levels of your car or truck's air conditioning.
PLEASE NOTE: Before attempting this repair, have your AC system's refrigerant properly removed by a qualified technician.
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obD8/1A...
• Pocket Screwdriver
• 19mm Wrench 1aau.to/oaay/1A...
• 10mm Socket 1aau.to/obCC/1A...
• 13mm Socket 1aau.to/ob2c/1A...
• 5mm Socket 1aau.to/obCC/1A...
• 7mm Socket 1aau.to/obCC/1A...
• 8mm Socket 1aau.to/obCC/1A...
• Coolant Funnel Set
• Ramps
• Trim Tool Set 1aau.to/oat5/1A...
• Pliers
• 7/32 Inch Socket 1aau.to/ocT/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/ob2c/1A...
• Socket Extensions 1aau.to/ob2c/1A...
• Gloves 1aau.to/oaVi/1A...
• PAG Oil
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oatU/1A...
• Jack Stands 1aau.to/oafX/1A...
• Pick 1aau.to/oZ4/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@mikebarnett6984]

Re use a/c orings bad idea.

[@federicotorresbordils7624]

Should be nice to see the A.C. gas recharging process and put the system working and freezing again.
BimmerN53

[@robvandevelde7943]

Great video! Not the easiest AC condenser to replace. Need some patience. The corrosion on the AC condenser and where the high and low side line attach to can be tricky and a bit of a pain.

[@ironmike742]

If you take 6 bolts out of the core support assembly then the whole cooling module can be taken out and sat on a bench to disassemble. It's a whole lot easier than fighting it in the vehicle.

[@paulpattyoberbreckling2462]

2 day job?

[@ArturoGonzalez-st6ep]

God job

[@yovanyorozco7750]

What about the transmission fluid ? I noticed you took cooler lines off . What do i do there ?

[@MrFitz1465]

Thank you so much.

[@abyssiniahenry128]

Doesn't the condenser need some PAG46 oil added in it?

[@gabrielachissottizubiria2496]

Very nice and detailed video!! Thank you!!! I noticed that there is a Trany radiator attached to the condenser!!