How i fixed code P17F0-CVT transmission judder on a 2017 Nissan Pathfinder using Autel IM608
Вставка
- Опубліковано 28 вер 2024
- Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!
muchsimas gracias por tomarte el tiempo para compartir tus conocimientos y ayudar a los que estamos aprendiendo.
no problema gracias por visitar el canal. bendiciones
@@JVFIXLLC buenas noche amigo disculpe que neseito aser en la conputadora para poder programar un cuerpo de balbulas de un nissan paifander 2013 yo tengo el j2534
Hi
Awesome video, saved me so much time 👍
thanks for watching
Thanks! Worked perfect
mo problem
Amigo tengo ese código en mi Altima 2017. Siento una vibración cerca del acelerador solo cuando voy a 100km. Puede ser falla en la transmisión? Nota: el vehículo no está alineado y balanceado todavía
si amigo puede que si sea la transmission salieron muy malas estas transmisiones para estos carros
Hello, sir. I have the same judder code on the сvt Nissan Pathfinder r52 2015 yb . In Ukraine Nissan's dealer says that the problem is with slippage of the variator belt. Can I ask you to please send me the instructions using a laptop. (Program, link to update etc).
Great video bro.. ive replaced the valvebody on my xtrail and it came with a cd can i use my scanner to scan the barcode on the cd.. ive never done this before but i wanna learn cause ive done alot of valvebodies and nissan always does the calibration.
Yes you can
My transmission range sensor barcode is faded 😢I can’t scan it what should I do
you can search one on ebay and take a picture or zoom in the picture and scan it
That's great but am working on my 2013 infinity jx35, I have changed the transmission and the TCM but the TCM is new one but when I put my car into driving mode and started driving 1 gear up to 6 gear it vibrate . Pls help me out.
Am will be waiting
I think your problem might be the tires vibration. do you have check engine codes?
Does that mean that the transmission have problem? There is a car that had this code and now the code is gone should i buy it?
Its a nissan Altima 2017
this code is about programming issues not mechanical u need to test drive it and you will know if the transmission is good
I do this jop but one of the car nissan altima 2018 v6 has an problem after reprogramming the rsponse is slow and the cas do not run fine
did the transmission had problems before?
i am from Ghana bro its a problem that most modern nissan vehicles are facing i will be very glad if i can get intuch with you personally cos i repair t'he variables My self thanks waiting for respons
yea u can send me an email at jvfix2021@gmail.com
I have the same problem I need help please is there a way I can contact u
u can email me jvfix2021@gmail.com
Cuanto es el costo de ese trabajo en un taller en new jersey? Me interesa
yo se lo hice gratis a un cliente. pero creo que sale de 120 a 180 dependiendo tu area
Donde esta tu para que me hagas ese trabajo? Yo estoy en new jersey!!!
yo estoy en California
I tried this with my Autel Maxicom 908 pro 2 an it erased the data but but when trying to Write it says Function not supported.
Could I be doing something wrong.
that scanner model has limited functions
I have an autel ms 919. My subscription expired. Is there any way to reprogram it without a CD
I am not sure if your model has the function, and I believe you need the subscription to do it
MUY AMABLE GRACIAS POR COMPARTIR LO QUE APRENDES ME SIRVIO MUCHISIMO EST info GRACIAS Y SALUDOS👍👍
gracias por visitar el canal saludos
Well done Javier ... Thx🎉
thanks for watching
I have Nissan sentra 2014
136 k km millages .
How can I fix it without replacing or repair it
does your transmission have problems like yerking or pulling or rpms ip and down
@@JVFIXLLChi mine does some times, the rpms with cruise control goes from 2000 to 2700 in a suddenly for a short period, can I try this or it is actually bad the transmission?
Thanks I have been wondering how to do that correctly without fawking something up! Appreciate it!
no problem
Very nice tool!
yea indeed it is
I registered mhhauto, however I do not see the area for the Nissan Ners area..How do I go about that?
I have the ners software I have it for sale cheaper than the dealership
@@JVFIXLLC Hi, is this software the same as accessing the nissan tech-info site?
@@JVFIXLLC how much?
I need to know , you took the code from the original transmission or the new one?
i took it from the new transmission.
I did this and the judder code is gone but the transmission is making noise and shifting hard is this normal ?
is yours cvt?
Yes same CVT nissan
check the oil level and if it's ok then I am afraid it would be your transmission. and also these CVT transmissions do not shift it just goes without shifting. arer u sure u installed a CVT?
Im having this problem wit 67k miles. Anyone in the Washington dc area who can perform this?
call the dealership it should be under warranty
Do u think it work with IM608 pro
yes it will
@@JVFIXLLC thank , it worked !
no problem
Necesito al menos ver como obtener información en español o subtítulos
que ocupa amigo?
Hombre tengo ese problema en República Dominicana 🇩🇴 con mi vehículo y antes que nada quiero intentar hacer esto que dices
Hice todo la dialisis de la transmisión y cambie todos los sensores a los originales, solo falto el del oxigeno y al principio funciono de maravilla pero luego ocupo este codigo y no avanza y es lenta al agarrar los cambios
Nissan altima 2016 Can you do that to a 2016 Nissan Altima?
yea is the same transmission
Where are you located??? How much would you charge to do it?
in visalia California, and if you saw this video and are subscribed I'll do it for free.
@@JVFIXLLC i wish i were there... I am in fl... But i will subscribe awesome video .. Thanks for taking the time to make them... 🙏👍
Good job 👍
Thanks 👍
My infinity jx35 has no tcm code
you have a vibration issue, check also your axles
Hola hermano como hago si no tengo el código?
puedes buscar un range switch que venga con la etiqueta nomas asegurate que sea de una trans cvt y similar el año
Como checo un corto en una pathfinder 2015.,no prende,no enlaza el scanner y descarga la pila en minutos..solo prende el tablero, luces y los ventiladores.please help me. Un rayo proboco eso.
lo primero tienes que hacer es desconectar los ventiladores pa que no sigan girando y luego checar fusibles uno por uno con la llave abierta si todos los fusibles estan ok entonces varios modulos se dañaron con la descarga de alto voltaje que recivio.
@@JVFIXLLC Muchas gracias. Fucubles ok ,Alternador en corto. Checare modulos..
exselentes dianostic master mui bien men
gracias. saludos
Good job
thanks for watching
great video
5555FFFE0000001CFFAD2D2E00000000000501230FE2000000000023FFB12D3B000000000023FF892A4A000100000026FF04554100000000000000910034009D00FF000200FF00FF0035EE0600C300A400F600F6FF9AFF85FF71FF66FF14FF8F000A0029001F001FFFD70000000000340000060061004C0D460F00000000F91C787800120007000733565832443030303537303236303430353700910034009D00000000000000000000000000000000EEFD
I need you to program my car
I am in visalia, California
Hi
hello
👌⚙🔩⚙
no problem
Can i just type in code instead of scanning? I dont have a way to scan a code on my autel.
you can, you can pause the video and use the code sequence, just do it at your own risk.
😂
losind camera foto
Hello ! I repaired a nissan x trail 2017 dci 177 hp with a cvt box. And I can't clear the P017f2 judder inspection error code. Please, if you can, help me with an opinion
it needs to be reprogrammed.
Hola sabes si con un MS906s puedo hacer esto ?
creo que esa no va funcionar porque no viene con j2534 interface
Y con el Pro ?
Es que busco pero la opción cuando se cambia el cuerpo de valvulas o la transmisión y veo no aparece ahí la opción
muchas gracias, acabo de quitarle el judder code que tenia, a ver si no vuelve a salir.
ojala no. todos Los que he reprogramado ya no han vuelto pabatras gracias a dios
I just got this code on my 2014 Pathfinder. Three times this week my car stopped accelerating in Drive and reverse. I took it into a shop. First they said Alternator done. Replaced. Breaks down the same day. They then replace the battery. Broke down today. 2 visits and 2 Tows later and I am down $2200 with no SUV. I tried again today and it did drive back up my driveway (it was stuck in the culdesac street), but I am too paranoid to drive it now. Only using my Tesla until I figure something out
danng, I am sorry you had to go through all that, but looks like your issue will be the whole transmission buddy check with dealer there is a lawsuit, and the dealer needs to pay for replacing the trany
Thanks for your video, Where are you located?, I’m in south Florida
no problem, I am in California
@JVFIXLLC Hay algun numero para contactarte? Tengo ese problema con mi carro
Hola amigo una pregunta donde estas localisado esque tengo ese problema con mi auto y nececito arreglarlo?
yo estoy en visalia California
😅k
Which interfaces work with NERS? THANKS
I use Autel j2534 that came with scanner im608 but are many out there.
@@JVFIXLLC really? Wow! I have that one. I also have the MDI 2, do you know if that one works with NERS too? Thank you for respond 🙏🏻
Good job sir..
thanks
New subscribers
thank you
By any chance are you in California
yes I am. I am in visalia California
@@JVFIXLLC thanks for the reply I have. 2014 pathfinder 3.5 awd. Transmission I think is done for doesn’t move and I hear a rattle. Only 80k miles crazy. Probably just going to sell it my friend said he will give me $4600
Great info sir
Does it work with im508
I think it does as long as u have the subscription on your tablet active
I hope so cuz the im508 doesnt come with a J2534 device
No cam to scan j2534 dose not do anything for tablet its for dealer tools@@moayado436
Hola qué tal excelente video, acá tienes un nuevo subscriptor, Disculpa dónde puedo encontrar el código para escanearlo en un 2014 nissan pathfinder?
gracias por subscription, la etiqueta siempre esta encima de la transmission en el range switch sensor.
Good job
thanks for watching