Couple I’ve been around the cowl will leak at base of wind shield and water runs down in to the spark plug tubes and will get a mis fires on cylinders 5/6. Might not be so common, but have had it happen couple of times.
Thank you for the video. I have a 2019 transit and my heat shield along the muffler you showed in the video has cracked all around both brackets. What a dumb design not reinforcing that more than that. I fell like putting a new one on will just be a temporary fix until I breaks again. I'm thinking about figuring out how to secure it more. I do a lot of highway miles and I guess the wind is catching it
I have clunking going on in the rear of my transit but the few shops I’ve taken it to tell me they can’t hear anything or try to blame it on something else. Every bump on the road at lower speeds. Entering and exiting driveways, dirt roads are the worst. Nobody seems to want to help. Idk if I should just rebuild the rear suspension bushings or leaf springs or what to do.
I have a 3.2 L, 5 inline diesel. I live in texas. Constant rattling on bumpy roads, quiet as hell on smooth. Sounds like a metal tube just rattling away.
I have a 2015 ford transit for my buiness had 116k miles shifts a little rough at times , but the turbo spools a bunch never had a turboed vehicle by ford is that normal? It kinda just spools a bunch
Wow ! That was just brilliant!! We just bought an old mk7 and it has that rattle ! Drives me nuts @ ' will show this video to our mechanic ! PS ' just when it starts the engine kicks in the bay ' does anyone know if there is a common engine or gearbox mount that fails ? Thanks to this guy ! Subscribed!
My EcoBoost transit was making alot of turbo noise and down on power was fearing the turbos were going....nope all but one bolt on both manifolds broke off the head. Crazy it was just hanging on for dear life. The drive shaft thing is annoying had in done twice and its doing it again just hit 130k on it. Over this van is a beast fast as hell hauls weight well. Mileage sucks but I am driving a billboard around at about 80mph. 🤣🤣🤣
2019 T350 SRW 3.7l - while driving slow I hear a thumping noise from the rear end. Its a rhythmic noise, so I assumed driveshaft. I lifted the Van and started spinning the wheel. The noise is there and driveshaft hasn't even moved. So its coming from the rear end. It is not a whine, or a loud clunk, its a muted noise. It sounds like something touching the rear axles (or just one) and makes noise through the drivetrain. Its getting louder. At 20-25 miles its very slow but when going 70-80 its making a continues noise and driving me nuts. I have recorded a video and will upload to youtube soon.
sweet nice to know all the trouble areas!!!! I'm telling you bro your channel is fire ass hell...... 99% of your videos is a great learn and process of your whole repair ticket !!!! Great video bro!!!!tons of info!!!!! n #provehymwrong
I just had all front end suspension ball joints upper and lowers changed all and still riding like crap and when on mest up terrain man it's worse sounds like marbels on 1 side
I get the same noise as the video pretty loud if i try to coast at 25-45 mph but if i let off the gas or push gas harder the sound goes away what do you think tha could be? Its like a grindy rattle it only happens when driving not in park and no noise when turning
HELP needed please! I’m looking at a m6 tipper 159k miles Took for a test drive , needed to start it with a small starter pack , had a squeal on start up , took it out to drive and from the minute i accelerated to low and high RPM sounded like a harmonic whine which got louder and louder and only stopped when was stationary .. what could this be ? Thankyou!!
ive always been a ford guy since i was a kid back in the 50s,,but they have built some stupid stuff in the last decade or so,,like doing away with the 4.9 I 6 motor
My transit connects 2010; when stepping hard on the gas pedal, it makes a whistling sound and loses all power on the transmission. If I start slow, it works as long as I don't push the gas pedal too quickly. Have you seen this before?
my trans (6r80) in my transit has 370k miles and shifts rough.did the ford service every 50k miles but never had filter changed because of how difficult it is to get to.would you recommend having it rebuilt or a ford reman and why? thks in advance!!
I was just talking to the transmission guy and he said it's time for a Ford reman and they typically don't even last three hundred fifty thousand miles
@@FordBossMe sorry for the delay. Our transit cutaway is attached to a WGO EKKO and it was in the Forest City service center. In discussing with other owners there we have found that the whining noise we have is due to the turbo and is normal. Thank you for your help.
I’ve got a 16 f150 5.0 and there’s a very loud whistle under acceleration. Cannot figure it out. Almost sounds like there’s a pinhole somewhere in the intake. Any ideas?
I wish it was boosted but it isn’t. I’ve read some have changed the vacuum lines on the top and back of the motor, it’s sold as one part. Still no confirmed fix for the ‘5.0 whistle’
I hope you can help me out, i have the same sound with my ecosport and it makes scraping sound like that at 43miles speed and above.. just recently changed my wheel bearings and all mounts are new.. when i hit the break and the speed went into below 40miles that grinding noise stops.. i've been with a lot of mechanics and they could not figure what is happening
Well there's either a couple things that you have going on something is wrong with the way the brakes are installed or whenever you recently did the wheel bearings somebody pushed the rotor or brake dust shield behind everything too close to the rotor and it needs to be pushed back away from the rear of the rotor it's that piece of metal that covers the back of the rotor push it away some
I appreciate your immediate response, so what happened was i've heard this grinding sound for a while but its confusing if its grinding or some wind pushing something to sound like metallic.Since no mechanic could figure where the sound originates i decided to replace the wheel bearings, yet the sound is still there.. :( and btw there is no dust shield on both front wheels
I live in Wisconsin and before my 2017 ever saw road salt, I coated the entire underside with fluid film, and reapplied it each year before winter. I have no rust, and my heat shields are not cracking from metal fatigue.
Hey, Ford Boss me! Just got a call from my Ford Dealership. Was waiting for long block installation on Sept 20 th 2021. They said Service manager walked out today. Friday morning. Had a water intrusion on 2 and 3. He never really diagnosed the engine problem with a leak down test. I dropped it off. It was there all day. Never even looked at it or took it in the bay. So, He told my wife and I that he ordered the long block. It never got ordered either. So, I am starting all over. On the 20th. The Escape goes in for the leak down test. To confirm the water intrusion. Then they will tell me if it needs a long block or not. The Mechanic said the Service manager never did the test. Why, Didn't he turn the Service manager into the Dealership. Sounds like Fraud to me. The Dealership is trying to save face. What do I do now. Who do I talk with there to make sure this gets done? Help! Me! Shawn.
You're going to have to go back to the process again unfortunately and I don't know what the service manager actually has to do with doing the leak down test the mechanic does it not the service manager
@@FordBossMe The person from the Dealership. Said They have to verifie The Water intrusion. With the leak down test that takes 5 hrs. They cannot go by anything the Service manager ever did or said to his customers. Does this happen alot? Man, What Cluster! Now this pushes the installation way back. Had taken time off while the Escape would be in. Had the rental car all lined up. Shouldn't we a least get a call from the owner of the Dealership! Who do I vent too. People that don't have a clue? Shawn.
Hi I got rattle noice between 2000-2500 rpm on gears 3and higher. Never heard on 1-2 gears .dealer replaced transmission and noice started after that. I checked car on lift noice is between engine and transmission do you think it is possible bad flex plate??thx
Are these built by mercedes ? The drive shaft rubber mount was known at mercedes as a flex disc. Looks exactly like ones from mercedes. And the include half the rest of the issues. I kept thinking you were looking at the underside of a mercedes.
I think Ford calls it a guibo. I was fortunate to have mine removed and replaced with a u-joint stub shaft prior to taking delivery on my 2017 nearly 4 years ago. I feel sorry for those that can't get the updated parts and are stuck with the old design.
The exact noise I have on my 2016 transit, now I know what it is , thanks for the vid
Yvw
Same here, was panicking thinking it may b a major problem. Thankyou
Couple I’ve been around the cowl will leak at base of wind shield and water runs down in to the spark plug tubes and will get a mis fires on cylinders 5/6. Might not be so common, but have had it happen couple of times.
Thank you for the video. I have a 2019 transit and my heat shield along the muffler you showed in the video has cracked all around both brackets. What a dumb design not reinforcing that more than that. I fell like putting a new one on will just be a temporary fix until I breaks again. I'm thinking about figuring out how to secure it more. I do a lot of highway miles and I guess the wind is catching it
I have clunking going on in the rear of my transit but the few shops I’ve taken it to tell me they can’t hear anything or try to blame it on something else. Every bump on the road at lower speeds. Entering and exiting driveways, dirt roads are the worst. Nobody seems to want to help. Idk if I should just rebuild the rear suspension bushings or leaf springs or what to do.
Get underneath it and start shaking everything down find out what's loose
Sweet and simple. Thanks man
Nice explanation and to the point. Thanks
I have a 3.2 L, 5 inline diesel.
I live in texas.
Constant rattling on bumpy roads, quiet as hell on smooth.
Sounds like a metal tube just rattling away.
Sway bar links or ball joints or strut mounts
seems to be coming from mid ,right side, underneath the sliding door. but I checked the door linkage.@@FordBossMe
I have a 2015 ford transit for my buiness had 116k miles shifts a little rough at times , but the turbo spools a bunch never had a turboed vehicle by ford is that normal? It kinda just spools a bunch
Wow ! That was just brilliant!! We just bought an old mk7 and it has that rattle ! Drives me nuts @ ' will show this video to our mechanic ! PS ' just when it starts the engine kicks in the bay ' does anyone know if there is a common engine or gearbox mount that fails ? Thanks to this guy ! Subscribed!
One of my customers has one of these; I’m going to show him this vid.
Thanks
this is great info! thank you so much
My EcoBoost transit was making alot of turbo noise and down on power was fearing the turbos were going....nope all but one bolt on both manifolds broke off the head. Crazy it was just hanging on for dear life.
The drive shaft thing is annoying had in done twice and its doing it again just hit 130k on it. Over this van is a beast fast as hell hauls weight well. Mileage sucks but I am driving a billboard around at about 80mph. 🤣🤣🤣
2019 T350 SRW 3.7l - while driving slow I hear a thumping noise from the rear end. Its a rhythmic noise, so I assumed driveshaft. I lifted the Van and started spinning the wheel. The noise is there and driveshaft hasn't even moved. So its coming from the rear end. It is not a whine, or a loud clunk, its a muted noise. It sounds like something touching the rear axles (or just one) and makes noise through the drivetrain. Its getting louder. At 20-25 miles its very slow but when going 70-80 its making a continues noise and driving me nuts. I have recorded a video and will upload to youtube soon.
Post the link to me Poissorichard.rp@gmail.com
sweet nice to know all the trouble areas!!!! I'm telling you bro your channel is fire ass hell...... 99% of your videos is a great learn and process of your whole repair ticket !!!! Great video bro!!!!tons of info!!!!! n #provehymwrong
#provehymwrong
Tyvm
Cant comprehend why a petrol v6 I assume , would need a turbo it's a van not a track day car , in UK powered by 2000 deisel
Yeah you know I understand what you're saying unfortunately there's many vehicles from many manufacturers here that have turbos on V6 engines
I just had all front end suspension ball joints upper and lowers changed all and still riding like crap and when on mest up terrain man it's worse sounds like marbels on 1 side
I get the same noise as the video pretty loud if i try to coast at 25-45 mph but if i let off the gas or push gas harder the sound goes away what do you think tha could be? Its like a grindy rattle it only happens when driving not in park and no noise when turning
I had today the same problem … I investigate few hours also with mechanic and couldn’t find the issue. Tommorow on the daylight I will ceck again
@@denisdorin9373 please update me if you find what it is
@@denisdorin9373 any luck?
Yes! Moooore!!!
Love my transit
HELP needed please! I’m looking at a m6 tipper 159k miles
Took for a test drive , needed to start it with a small starter pack , had a squeal on start up , took it out to drive and from the minute i accelerated to low and high RPM sounded like a harmonic whine which got louder and louder and only stopped when was stationary .. what could this be ?
Thankyou!!
Probably exhaust manifold leak
I had a loud pop like a gunshot then immediate loss of turbo boost, any idea what it could be? Transit 250 3.5l ecoboost. Thanks!
Yeah the boost hose popped off under the front
@@FordBossMe Wow, that was scary, thought it threw a rod or something at first. I'll check it, thanks a lot!
ive always been a ford guy since i was a kid back in the 50s,,but they have built some stupid stuff in the last decade or so,,like doing away with the 4.9 I 6 motor
My transit connects 2010; when stepping hard on the gas pedal, it makes a whistling sound and loses all power on the transmission. If I start slow, it works as long as I don't push the gas pedal too quickly. Have you seen this before?
Exhaust manifolds need resealed
@@FordBossMe thank you! I will get that fixed.
very helpful, thank you!
Where are you located? I have these issues and no Ford dealer can find it.
I work at Dundee Ford in Dundee Illinois
my trans (6r80) in my transit has 370k miles and shifts rough.did the ford service every 50k miles but never had filter changed because of how difficult it is to get to.would you recommend having it rebuilt or a ford reman and why? thks in advance!!
I was just talking to the transmission guy and he said it's time for a Ford reman and they typically don't even last three hundred fifty thousand miles
@@FordBossMe thk you for your valued opinion.will do!!
My 2018 transit 150 makes all sorts of driveshaft noises
Whining noise on my 2021 ford transit cutaway. All the time, not just on acceleration. Help on what is going on??? No error codes.
I mean I don't know what whining noise means I would like for you to make a sound clip for me and then send it to me that would help
Poissorichard.rp@gmail.com
@@FordBossMe will do when we start moving again tomorrow
@@FordBossMe sorry for the delay. Our transit cutaway is attached to a WGO EKKO and it was in the Forest City service center. In discussing with other owners there we have found that the whining noise we have is due to the turbo and is normal. Thank you for your help.
What about whining noise in your front axle passenger side?
Could be wheel bearing
I’ve got a 16 f150 5.0 and there’s a very loud whistle under acceleration. Cannot figure it out. Almost sounds like there’s a pinhole somewhere in the intake. Any ideas?
Boost leak
I wish it was boosted but it isn’t. I’ve read some have changed the vacuum lines on the top and back of the motor, it’s sold as one part. Still no confirmed fix for the ‘5.0 whistle’
I hope you can help me out, i have the same sound with my ecosport and it makes scraping sound like that at 43miles speed and above.. just recently changed my wheel bearings and all mounts are new.. when i hit the break and the speed went into below 40miles that grinding noise stops.. i've been with a lot of mechanics and they could not figure what is happening
Well there's either a couple things that you have going on something is wrong with the way the brakes are installed or whenever you recently did the wheel bearings somebody pushed the rotor or brake dust shield behind everything too close to the rotor and it needs to be pushed back away from the rear of the rotor it's that piece of metal that covers the back of the rotor push it away some
I appreciate your immediate response, so what happened was i've heard this grinding sound for a while but its confusing if its grinding or some wind pushing something to sound like metallic.Since no mechanic could figure where the sound originates i decided to replace the wheel bearings, yet the sound is still there.. :( and btw there is no dust shield on both front wheels
Also tried to check heat shield and its in immaculate condition.. could it be the cv joint can cause that grinding/metallic sound?
How do you fix the loose bracket?
New bolts inspected make sure it's not cracked or broken send it
@@FordBossMe I appreciate you taking the time in teaching us. Take care !
How old is that Transit? Does the new ones look to be the same design?
Yes
Like a 15 I believe
Man, the corrosion on that crossmember under the engine. I'm glad I don't live in a northern tier area with all that freakin' salt.
I live in Wisconsin and before my 2017 ever saw road salt, I coated the entire underside with fluid film, and reapplied it each year before winter. I have no rust, and my heat shields are not cracking from metal fatigue.
Lol already fixed this on our work 2016 tranisit last summer!
Does anyone watching know if this is a FWD or RWD transit ? Thanks
Rear
Where are the Transit's made?
Idk
@@FordBossMe I asked because someone told me they were made in Turkey.
Kansas City is where the full sized Transit is built. The Transit Connects (small one) were built in Turkey, might still be.
@@gailgrove Thank You!
@@gailgrove Still have the built in Kansas sticker on my windshield. Another rock or two I won't
Thank you 😮
Hey, Ford Boss me! Just got a call from my Ford Dealership. Was waiting for long block installation on Sept 20 th 2021. They said Service manager walked out today. Friday morning. Had a water intrusion on 2 and 3. He never really diagnosed the engine problem with a leak down test. I dropped it off. It was there all day. Never even looked at it or took it in the bay. So, He told my wife and I that he ordered the long block. It never got ordered either. So, I am starting all over. On the 20th. The Escape goes in for the leak down test. To confirm the water intrusion. Then they will tell me if it needs a long block or not. The Mechanic said the Service manager never did the test. Why, Didn't he turn the Service manager into the Dealership. Sounds like Fraud to me. The Dealership is trying to save face. What do I do now. Who do I talk with there to make sure this gets done? Help! Me! Shawn.
You're going to have to go back to the process again unfortunately and I don't know what the service manager actually has to do with doing the leak down test the mechanic does it not the service manager
@@FordBossMe The person from the Dealership. Said They have to verifie The Water intrusion. With the leak down test that takes 5 hrs. They cannot go by anything the Service manager ever did or said to his customers. Does this happen alot? Man, What Cluster! Now this pushes the installation way back. Had taken time off while the Escape would be in. Had the rental car all lined up. Shouldn't we a least get a call from the owner of the Dealership! Who do I vent too. People that don't have a clue? Shawn.
Downloaded and saved.
That's just all low cost design/manufacturing on a commercial vehicle... it should be alot better considering.
Good videos sir
Tyvm
Hi I got rattle noice between 2000-2500 rpm on gears 3and higher. Never heard on 1-2 gears .dealer replaced transmission and noice started after that. I checked car on lift noice is between engine and transmission do you think it is possible bad flex plate??thx
Idk
Are these built by mercedes ? The drive shaft rubber mount was known at mercedes as a flex disc. Looks exactly like ones from mercedes. And the include half the rest of the issues. I kept thinking you were looking at the underside of a mercedes.
No
Same type of design though
I think Ford calls it a guibo. I was fortunate to have mine removed and replaced with a u-joint stub shaft prior to taking delivery on my 2017 nearly 4 years ago. I feel sorry for those that can't get the updated parts and are stuck with the old design.
@@tradekingdistributing3586 yeah the new updates are out on these and it's called a flex coupling
@@tradekingdistributing3586 the new updates you go to a 4 bolt trans yoke into a new metal driveshaft
Be better if you clamped that first one up whilst trying to demo the others
Can't Always be ideal
Let it leak....slow down the rust..lol
Lol guess what I though was the cam chain noise…
👍👍👍💯💯💯
Quantity not quality anymore