Great vid! The lead coming off the esc is for a hobbywing motor, the esc can read the temp when paired up. Im using a max10sct combo with a hobbywing 3660 (550) 4000kv on my hpi blitz and its fast on 2s!
jpsnowrider hey I am new to hobbywing. I just got an sc8 for my rustler and I want led to ask you if I really need a program card for it or can I just program it manually with my transmitter?????
I got 75mph with my EZ run max10 ESC and a 4000kv ez run hobby wing motor with a 76t spun and a 31t Pinion with a 5200mah 50c 3cell batter (Lictron). With DX3 remote. Any idea on how I can get it up to 100 to 150mph? Plus I rebuilt the transmission with all HR parts like the seal differential. All harden still gears!
The small plug is for the motor, it is a heat sensor. You don't have to use it but it helps to protect the motor from over gearing, like if you were trying to make a traxxas do 100mph or something. :)
Bakerboyzzz RC I just keep it lowkey lol I’ll sneak over to the hobby shop and I’ll just say one of my friends bought me the parts 😂😂😂😂😂 or just hide the parts depending how small/big they are, or even I’ll just say I had the part, just never used it lol. Ayy there are plenty of ways to get around this type of stuff 😂😉👌👍🤟🏼🤙😁🤣😅😀😆😃🙄😑🏒 bash on brother
@@alfa7108 Actually, from both gamer and rc hobbyist perspective, I think he should get into the rc hobby, he has nothing to lose if he has the budget. Personally I think gaming is much boring as it gets too competitive these days most of the players are toxic, but it is atleast good for racing sims. It's really good to see more people are getting in this hobby, it's pretty friendly and peaceful to work on your rc car for better performance rather than fighting endless hordes of creepers
Running the stock Tires on 3S, the Rusty vxl will run 76MPH. Just remove the rear Spoiler, and flip the front Bumper over. Gear it 31-76 and 76MPH is pretty easily achieved.
I had stock tires on my vxl and on 2s one over ballooned and stripped off one side and then ballooned more and wiped out lucky it didn't hit anything. No I have trenchers and they handle fine about to go to 3s.
for me, the sct combo is 150 aud, and the sc8 is 100 aud only for the esc. i was thinking of going for the castle combo and then upgrading my esc later. So what motor would go with the sc8 for under 200aud
Amistry20 I have my sc8 in a 2wd with the hobbywing ezrun 3660 4000kv. Great motor and I have even run it up to 4s lipo. Stays real cool and then you have everything waterproof. I think that should stay in your budget
yes! i had changed my mind to that! i am definatly gonna go with the sc8 but with what motor would i get same speeds as velineon with? how fast does yours go?
you'll definitely get more speed out of the hobbywing combo. I dont own a velineon system but i do know that when people gear them up they often overheat or burn out easily, and thats on 3s. with my combo geared up on 4s, and keep in mind hobbywing does not say that the motor can take 4s, it stays very cool and i have no doubt that I could go at least 70mph maybe even 80-90mph or more with timing turned up and more gearing. Also if and when you want to go faster hobbywing makes several motors that are slightly larger and could handle some serious speeds, without totally breaking the bank. hope this helps!
Nice, i was thinking of going with a tenshock sc401 or a castle 3800kv. I have heard some bad things about hobbywing motors getting quite hot, but if you can get those speeds, i might go with a hobbywing. Did you have to modifry the chasis/ drivertain to fit the motor?
Since I've been soldering wires and parts onto PCBs for 18+ years, and I developed an interesting way to solder wires without using a tool to hold the part or another wire. I wrap the solder around my index/pointer finger, then hold onto the wire using my thumb and middle finger. Then I feed in the solder that's wrapped around my pointer finger. It's just faster when you have to solder loads of product for a costumer. Now, the people I work with use the method, some find it easier and some people took a week or so to get the dexterity to feed the solder in smoothly. It does take practice and tolerance to the heat that travels up the wire. I've been doing it for so long I barely feel the heat anymore from holding caps and resistors in place while soldering the legs.
webslingercj I had to use steel belted radial tiresTo go over 80mphthey were around $100 eachTire.., I have just about, $1200 into this truck..My, 114mph1/10 scale traxxas rustler vxlwith a1/8 scale Castle Creations Mamba Monster 2200kv 90k rpmOn 6s lipo 22.2volts 10,000mah120c burst .Full ceramic bearingsTitanium screws & nutsMIP 2 piece steel driveshafts,Anidoized red and blue aluminum shock towers, bell cranks, Hubs and hub carriers,turnbuckles, etc40 tooth pinion, 40 tooth spur gearsMOD 1 steel gearsWith a 1 to 1 gear ratio,And Plastic RPM bendable A-arms, & bumpers,Custom wheelie barThen,I had to melt down 2 1/2 poundsOf Lead .Then mount it to the front Bumper, because it can easily pull a wheelie at 100mph...and I paint all my own body's Check out my Pagani Zonda Speed Run BodySo,If you get a chancePlease stop by my channelJust type WEBSLINGERCJ #2OrWEBSLINGERCJ #9 All 60 of my vids are numbered. I SUBSCRIBED TO YOUR CHANNEL. PLZ SUB BACK. And keep up the great work. Cya, W3BZ And as always Keep RCING
man you make these things look cool - I remember the scene in the 80s with no lion/lipo, no nitro, no ultra cheap chinese gear, it's proper stuff now, cool.
BUILTLIGHTWOUNDTIGHT really? Because i have 3s on a 3000kv motor and it doesn’t go nearly that fast. Plus my rc is super light, definitely lighter than the rustler
Those badlands sure as hell wont take that kind of abuse if you are going to attempt 100 mph you will need some pro-line primes or some thing like that. Just get some street tires.
Ok first what is that body sorry? Also that will probably not do it on 4s even with gearing you will probably just bern up the motor or esc also what you need solid tires to do 100mph!!
Kevin Talbot omg they don’t sell the body no more can you sell me one Kevin I just got a brushed rustler but I’m about to go brushless an I wanted that body smh
Aluminum hexes are a must when upgrading this thing or running on LiPos. I bashed my Rustler quite a bit and they stripped on me when the wheel nut came a bit loose. Don’t suffer the same fate I did. It made removing one of the front wheels so impossible I literally had to destroy it to remove it.
Hi Kevin I have a traxxas rustler 2wd vxl but I don’t know what pinion gear to run I’m currently running the one it says on the parts Manuel because it used to be a brushed car! It keeps blowing out tyres What pinion gear should I go for Cheers
Those spare small wires coming from esc on my vxl rustler 3s lipo battery 2wd are for fan on top of esc. Your style esc might be for extra one onto of one inside your esc or for motor fan maybe. Also when running 3s you cut small front left side bit like you did.
I have a question, I got a rustler and on 3 s only it’s a monster. I have been destroying my u joints and I do have bigger heavier wheels but my universal joints are getting destroyed. Have any ideas on a fix
Once you set the throttle points on the ESC you have to power it off to lock the settings. Then when you turn it back on it should be good. 👍👍 that how it was with my EZMAX 6.
For calibrating the esc with a tq radio I think you have to hold the set button on radio and turn it on should blink red. open the receiver and click the link button and turn on your esc
Hello, I come for this reason ask for help from someone who knows, which is: about oil shock absorbers, ... once bought a pack of 4 or 6 bottles of 60ml with numbers on its label that goes from 800 to 3000cst, .. I believe this is the name, and what I wanted to know is with the increase of such number (cst) the oil gets thinner, or thicker! overall and for 1: 8 and 1:10 scale cars of road, what would you advise? , .. because I think what I have very thick, though, that some say is also for differentials, if you can give me a help in this issue of damping oil I appreciate, .. thank you
Wow I didn't realize how much more enthusiastic sounding you've become😂😂 love u bro
fr lmao
Exactly what I was just thinking. I came back to this video because my first car was a rustler 2wd brushed back in 2016 or 2017
The $ has changed.
Being financially stable and not worrying and having anxiety about financial issues can change a whole demeanor
It for a ezrun motor
You made my Christmas list expensive
69 likes...
X-Maxx 8s, Kraton 8s, X-01
@@arir43 that's almost 3k😂
what are those tyres called
Ben Armstrong Pro line badlands
Those tires could cut pizza at 100mph lol
Video idea!!
@@KevinTalbotTV no known no known not nino in ok kid
Yeah lol
Pizza probably not the only thing it can cut.. Insane ballooning!!
Yes!!!
Great vid! The lead coming off the esc is for a hobbywing motor, the esc can read the temp when paired up. Im using a max10sct combo with a hobbywing 3660 (550) 4000kv on my hpi blitz and its fast on 2s!
jpsnowrider hey I am new to hobbywing. I just got an sc8 for my rustler and I want led to ask you if I really need a program card for it or can I just program it manually with my transmitter?????
It's for any motor. Not just hobbywing
I got 75mph with my EZ run max10 ESC and a 4000kv ez run hobby wing motor with a 76t spun and a 31t Pinion with a 5200mah 50c 3cell batter (Lictron). With DX3 remote. Any idea on how I can get it up to 100 to 150mph? Plus I rebuilt the transmission with all HR parts like the seal differential. All harden still gears!
This was the first video that made me subscribe and keep watching the channel
How?
You got a heart from a video that came from 2017?
Btw we are the same!
@@goldplayzroblox3917 Kev's different, he cares
Same weird
@@goldplayzroblox3917 cuz kev is the best
You sound so depressed in these vids all the new ones you sound fine
I was just camera shy
Ah fair enough
ikr
i agree he could jump over the moon if he tried but in these old vids. . .
@@KevinTalbotTV I believe you
The small plug is for the motor, it is a heat sensor. You don't have to use it but it helps to protect the motor from over gearing, like if you were trying to make a traxxas do 100mph or something. :)
Just look at all the world speed records for RC cars, 90% are Traxxas vehicles.
Either you have a ton of money or you own a hobby shop. Damn. I wish I could spend like that on a hobby. I'd be divorced if I did lol.
Adam Baker 😂😂 12 years old and that's hallarios
its hard were not rich just having fun
Look at the program he offers to teach you, he owns an eBay shop and sells 100K a year in rc parts.
Bakerboyzzz RC he had $100k a year + youtube money 💰 💰 💰 💰
Bakerboyzzz RC I just keep it lowkey lol I’ll sneak over to the hobby shop and I’ll just say one of my friends bought me the parts 😂😂😂😂😂 or just hide the parts depending how small/big they are, or even I’ll just say I had the part, just never used it lol. Ayy there are plenty of ways to get around this type of stuff 😂😉👌👍🤟🏼🤙😁🤣😅😀😆😃🙄😑🏒 bash on brother
I could watch your videos all day Kevin, you make me want to spend money though !
Haha fucking funny
Lmao same here well, same for everybody 😐
lol yea
I think we can all agree
Same😐
Stock car: exists
Kev: hell no
Thus video has been out 5 months and i dident see 1 right answer o the lead. Its for the g2 hobbywing motors. Its a temperature cut off
danny wilcock, OK thanks.
Finally, thank you
Yes
Hey Kev,, i have rustler with badlands on the back and wheely bar as it needs it,, it is crazy fast,,, 3s is just bonkers,, 😀
Brent Humphreys so do I it's crazy lol
when i have decent job....i gonna start a hobby just like you..instead of gaming
They're both fun. Keep them both.
@@alfa7108 Actually, from both gamer and rc hobbyist perspective, I think he should get into the rc hobby, he has nothing to lose if he has the budget. Personally I think gaming is much boring as it gets too competitive these days most of the players are toxic, but it is atleast good for racing sims. It's really good to see more people are getting in this hobby, it's pretty friendly and peaceful to work on your rc car for better performance rather than fighting endless hordes of creepers
How dont you have more subs? thats suprising I love your channel
I kinda want a Rustler now. That thing is cool.
Buy it then
That thing looks absolutely amazing. Good work!
Running the stock Tires on 3S, the Rusty vxl will run 76MPH. Just remove the rear Spoiler, and flip the front Bumper over. Gear it 31-76 and 76MPH is pretty easily achieved.
Wait what’s spiller
And u said 31-76 what’s that
Please answer
@@p3eqo75 gears. Pinion gear.
I had stock tires on my vxl and on 2s one over ballooned and stripped off one side and then ballooned more and wiped out lucky it didn't hit anything. No I have trenchers and they handle fine about to go to 3s.
This is outstanding! From another traxxas owner I have a 1/16 e revo
A bit late, but that one wire is for a sensored motor. Temperature cutoff
Trent Rensburg and I’m even more later butttt, by the looks of wire it looks to be a fan instead
Ali_M Gaming temp wire for motor.
I cam confirm , bit this one also works for the sensorless .. i have a Ezrun combo that came with this plug and plugs right in the motor
Stef Willems confirmed, same combo here. This is for the ESC to read the motor’s thermal sensor.
IM LATER HAHAHAHAHAHHAHH
You need to film a tour around your shop! It looks awesome !
The wire on the esc is for when you get a combo motor and esc and it plugs into the motor
Gettin close to a million kev!!! So excited for you.
'You can tell if it's a good joint or not by the colour'
You’re tip about the rubber band around pliers is genius
Niiice man! You make things look so easy! Keep 'em comin'!!
Rc Kingz well, because it is easy
@@wazpie1 you cocky little shit
One of your best vids. I learned a lot. thanx
I've watched this video like 40 times....
Honestly
I've got no objections.
Same tbh😂😂
Really enjoyed this video. Love whenever showing modifications and upgrade.
anyone watching in 2019??
almost 2020
Yes
Yo
Im watching in 2030
Almost 2020
Watching this now after watching your recent videos for the past 6 months, the energy is just so much lower 🤣 lmao
Awesome video man!!!! I have a rustler xl-5 and I wanna go brushless. That hobbywing is a bit much for me. I am gonna go with a castle sv3
for me, the sct combo is 150 aud, and the sc8 is 100 aud only for the esc. i was thinking of going for the castle combo and then upgrading my esc later. So what motor would go with the sc8 for under 200aud
Amistry20 I have my sc8 in a 2wd with the hobbywing ezrun 3660 4000kv. Great motor and I have even run it up to 4s lipo. Stays real cool and then you have everything waterproof. I think that should stay in your budget
yes! i had changed my mind to that! i am definatly gonna go with the sc8 but with what motor would i get same speeds as velineon with? how fast does yours go?
you'll definitely get more speed out of the hobbywing combo. I dont own a velineon system but i do know that when people gear them up they often overheat or burn out easily, and thats on 3s. with my combo geared up on 4s, and keep in mind hobbywing does not say that the motor can take 4s, it stays very cool and i have no doubt that I could go at least 70mph maybe even 80-90mph or more with timing turned up and more gearing. Also if and when you want to go faster hobbywing makes several motors that are slightly larger and could handle some serious speeds, without totally breaking the bank. hope this helps!
Nice, i was thinking of going with a tenshock sc401 or a castle 3800kv. I have heard some bad things about hobbywing motors getting quite hot, but if you can get those speeds, i might go with a hobbywing. Did you have to modifry the chasis/ drivertain to fit the motor?
i really enjoy watching these kind of vids
You should do a giveaway with the old Traxxas speedcontroller!!! If you still have it of course
Since I've been soldering wires and parts onto PCBs for 18+ years, and I developed an interesting way to solder wires without using a tool to hold the part or another wire. I wrap the solder around my index/pointer finger, then hold onto the wire using my thumb and middle finger. Then I feed in the solder that's wrapped around my pointer finger. It's just faster when you have to solder loads of product for a costumer. Now, the people I work with use the method, some find it easier and some people took a week or so to get the dexterity to feed the solder in smoothly. It does take practice and tolerance to the heat that travels up the wire. I've been doing it for so long I barely feel the heat anymore from holding caps and resistors in place while soldering the legs.
and it will never do a 100mph on those tires lol
Ikr ;
General Hobbies he will get too about 80mph and they will explode
General Hobbies p
A
webslingercj
I had to use steel belted radial tiresTo go over 80mphthey were around $100 eachTire.., I have just about, $1200 into this truck..My, 114mph1/10 scale traxxas rustler vxlwith a1/8 scale Castle Creations Mamba Monster 2200kv 90k rpmOn 6s lipo 22.2volts 10,000mah120c burst .Full ceramic bearingsTitanium screws & nutsMIP 2 piece steel driveshafts,Anidoized red and blue aluminum shock towers, bell cranks, Hubs and hub carriers,turnbuckles, etc40 tooth pinion, 40 tooth spur gearsMOD 1 steel gearsWith a 1 to 1 gear ratio,And Plastic RPM bendable A-arms, & bumpers,Custom wheelie barThen,I had to melt down 2 1/2 poundsOf Lead .Then mount it to the front Bumper, because it can easily pull a wheelie at 100mph...and I paint all my own body's Check out my Pagani Zonda Speed Run BodySo,If you get a chancePlease stop by my channelJust type
WEBSLINGERCJ #2OrWEBSLINGERCJ #9
All 60 of my vids are numbered.
I SUBSCRIBED TO YOUR CHANNEL.
PLZ SUB BACK.
And keep up the great work.
Cya, W3BZ And as always Keep RCING
man you make these things look cool - I remember the scene in the 80s with no lion/lipo, no nitro, no ultra cheap chinese gear, it's proper stuff now, cool.
Any1 watching in 2023
I am Watching in 2024
Same@@jukomagkekse4798
Always Kev makes the best rc video reviews and destruction ..lol
@@Boogie_the_cat 2026
This is an amazing video it’s insane how you get these things to go so fast.
2650KV on 3S would get you 100MPH.
BUILD-IT-LIGHT-&-WIND-IT-TIGHT!!!
BUILTLIGHTWOUNDTIGHT really? Because i have 3s on a 3000kv motor and it doesn’t go nearly that fast. Plus my rc is super light, definitely lighter than the rustler
On 4s and very good erodynamica it may do 90 and max 100
@@mojaverc1585 my Rusty is running 81MPH on 3S.
@@jeroendejong1577 4S should get a 100+MPH.
BUILTLIGHTWOUNDTIGHT defonetly not whit that tires lol
Young kevinnnn
Those badlands sure as hell wont take that kind of abuse if you are going to attempt 100 mph you will need some pro-line primes or some thing like that. Just get some street tires.
Holden Calhoun yes and it’s rwd and the front end lifts easily
Or you could get radial belted tires
Primes balloon like crazy on my 21.5t 2s street stock track car, unless you tape them maybe
Grps or some good foams. Proline primes dont even think about holding up on my hyper, they make you lose control about 65mph
Looks soo different than before and much, much better 👍
The small Cable was for LED-Lights
Mettigel that's a motor temperature, cable
i trust your answer more lol ...
he said effin lights ... from the esc bro !?! ... lol
Mettigel It’s for hobbywing motors with temps sensors really good thing
Nope, ots a sensor wire to monitor the temp of the matching motor
Umm, no it’s not
Weird how I got addicted to ur channel. Good shr
Shit
I didn’t pay attention to temps and I paid the price. My car melted. All that was left were the springs and they were standing perfectly straight up.
What about warranty? Or was it a Traxxas?
This was the first video I watched on your channel kev!!! Much respect from me too yo!!
Ok first what is that body sorry? Also that will probably not do it on 4s even with gearing you will probably just bern up the motor or esc also what you need solid tires to do 100mph!!
Also think that's a for a fan
He owns a shop, he probs has some onroad tires somewhere
its a proline bulldog but no longer available :( I have a personal stash however :)
Kevin Talbot omg they don’t sell the body no more can you sell me one Kevin I just got a brushed rustler but I’m about to go brushless an I wanted that body smh
Kevin Talbot an is the velineon motor still running good with that esc you useing ?
Kevin now a days: OHH ITS CHRISTMAS EVERYDAY! Kevin before: alright guys, just had some shit to turn up.
I would pay this guy to say the Oxiclean slogan.
GETS THE TOUGH STAINS OUT YEAH YEAH IT DOES
yeah yeah
Great video Kev. It looks awesome
I want a Rustler VXL SO badly!
It's easy, really! Just point, click, ship! That's what I do. When the credit card is full, I get another one!
lovely kev
3:47 it is probably for the fan, cause i have a drone with the exact same plug, and thats for the motor
Its actually for lights
That rustler looks great cant wait to see a video of it running
Those are off-road tires you will never get to 100 with those
I love Kev because I just saw a Comment from 9 months ago as of when this comment is out and this is a 3 Year old video. He responded! Gotta love kev
Dose anyone else use there teeth to strip wires
Is it a clean cut?
*does *their
Dude your channel is the best channel ever keep it up man!
You plug it into the fan
He loved your comment I'm jealous
@@crazykatana1297 nah you plug it in the motor some motors have the option 🤦🏻♂️😂 mine has the same and it has been plugged in since I fitted it
his editing has gotten a lot better since this
Sub
Aluminum hexes are a must when upgrading this thing or running on LiPos. I bashed my Rustler quite a bit and they stripped on me when the wheel nut came a bit loose.
Don’t suffer the same fate I did. It made removing one of the front wheels so impossible I literally had to destroy it to remove it.
This is my favourite RC CAR IT LOOKS SO COOL
The body is very cool , also the tyres are very nice looking.
Hi Kevin
I have a traxxas rustler 2wd vxl but I don’t know what pinion gear to run I’m currently running the one it says on the parts Manuel because it used to be a brushed car! It keeps blowing out tyres
What pinion gear should I go for
Cheers
Love your video car looks great
I love rc cars and rc trukes I am a huge fan keep on doing your stuff
Great build cant wait to see it in action!
Your awesome my friend I can learn A lot from you
I love it youre voice is way different then now
Well that's a hum-dingy😂
Dang getting a box with all those parts just looks so satisfying
Best intro "Just had some sh** show up" 🤣🤣🤣🤣🤣
Those spare small wires coming from esc on my vxl rustler 3s lipo battery 2wd are for fan on top of esc. Your style esc might be for extra one onto of one inside your esc or for motor fan maybe. Also when running 3s you cut small front left side bit like you did.
Great to go back in time and remember where we started. Been 4 years already?
Ha haaaa…at 10:31 - reading the “destructions”!!!! Good stuff.
The reason I live watching you out of every you tuber ever is because you go out of your way just to make life fun for all of us thank you
the odd wire in esc is for compatible hobbywing motors to measure temperature and use the motor thermal shut-off feature in esc
This is the only way I can poop properly man. If I watch anything else it's all messed up lol love u dude
Can't wait to see your Rustler bashing in the video.
I have a question, I got a rustler and on 3 s only it’s a monster. I have been destroying my u joints and I do have bigger heavier wheels but my universal joints are getting destroyed. Have any ideas on a fix
**M** * better driveshafts
I love the rustler nice rc very fast a lot of power this vilenion motor
i aintt never heard kev swear
does it really matter that the tires are front or rear? probrally could have just gotten 4 rear.. and it still work just fine
Yes it matters on 2wd RC's The fronts only have bearings no hex pattern on the rim,...
I wanna see him stick razor blades on those tires then it can really cut pizza 🤣
From some shit just turned up, to ITS CHRISTMAS EVERYDAY 🎄
Very complete video..👍🏻
"A Dremel come in handy, it would."
Once you set the throttle points on the ESC you have to power it off to lock the settings. Then when you turn it back on it should be good. 👍👍 that how it was with my EZMAX 6.
You have really good ideas
I wish you’d take the rustler out more
. Hey whats with the antenna being that short??? Plz explaine
The small cable is for motor thermal protection, when you have a hobbywing motor
Nice vid bro keep it up with the Traxxas also where do you plug in your battery in your rustler VXL because I got one
You plug it in the thing on the blue thing
Also great question I was wondering the same thing
For calibrating the esc with a tq radio I think you have to hold the set button on radio and turn it on should blink red. open the receiver and click the link button and turn on your esc
You really need to get yourself the Hobbywing Wi-Fi module! I promise your brain won't hurt from that one. 😉😇
old school hack of the day,rubber band around the pliers,cant believe i never thought of this
OMG MY RUSTLER VXL IS GONNA COME TODAY IM SOOOOOO HYPED
Hello, I come for this reason ask for help from someone who knows, which is: about oil shock absorbers, ... once bought a pack of 4 or 6 bottles of 60ml with numbers on its label that goes from 800 to 3000cst, .. I believe this is the name, and what I wanted to know is with the increase of such number (cst) the oil gets thinner, or thicker! overall and for 1: 8 and 1:10 scale cars of road, what would you advise? , .. because I think what I have very thick, though, that some say is also for differentials, if you can give me a help in this issue of damping oil I appreciate, .. thank you
Awesome. Absolutely awesome. That thing is gonna tear it's own tires off and eat them for lunch. Hope you got good throttle control. Lol