I watched this video yesterday then replace my toilet after watching. I was by myself so this step by step tutorial madeit so easy for a 1 man change. I appreciate you taking the time to post this. I'm 69 and this saved my back. Thank you!
I wish I would have become a plumber. I went to college instead and what a waste of money and no passion for my job now at 54. I still love plumbing projects, although I haven't done it for 30 years and listened to all the complaints that I'm sure goes along with it, like all jobs. Love your videos.
Thank you, thank you, thank you! For being so detailed. For showing every single step (not just telling). For considering that some people may be older or have bad backs (that's me). I'm a 63 year old woman who is trying to become more self-sufficient with chores that my husband normally does. I'm going to have this video handy in the bathroom so I can follow it step-by-step as I go along.
This tutorial is amazing. I am reasonably handy but this is my very, very first time to tackle a project of this size. You offer amazing details and pointers on where things might go wrong. The video is exceptional. Was not planning on doing this project over Christmas, but my dad has the flu and my husband's arm is broken, so it's me :) Thank you thank you thank you thank you
I'm jealous of how perfect your rough in and supply are. Your house must be very new. I think most people have to deal with replacing toilets on older homes and it doesn't go so smoothly. Another great video, thank you!
You are right - The variety of demons that can lurk under a toilet are large enough that I elected not to try to cover them all in this video - it was already nearly a half hour long. :) This was shot in a pretty new home, yes. I've replaced toilets in much, much older homes though, and other than being a bit more ... gross... have not run into any major problems. *knock on wood* Thanks for watching!
My luck runs like "most people." Any home repair or car repair I've found a video for on UA-cam generally ends up taking two to three times longer in my case. I always run into some sort of complication or gremlin. So I just factor the extra time in from the beginning. ;-) :-( Thanks @AmplifyDIY for another great video.
Whenever I install a new toilet I tend to caulk around the whole toilet leaving about a 1" gap at the back, Best of both worlds imo it looks great and you cant notice the lil bit that is missing at the back aswell as if a leak occurs most of the times it will be able to still be noticed. I am not a professional plumber by any means tho!
Thank you for this very clear description of how to do it. I'm a 64 year old woman and I've done toilets before but I always thought they were kinda hard, I'm going to be doing mine this coming week and this is very helpful. I also love the bloopers they're always so funny on TV shows and stuff and even a guy who's putting a toilet on haha😅
ive never done this by myself am not a plumber but really have no choice as im the homeowner, thx for this video, really needed these extra details, i hope to tackle this in next week or so
Great video! Here are some things to consider. I do caulk because my Florida house is built on a concrete slab, no wood under toilet to rot if there is a leak. If house is wood frame be sure to not caulk the back of toilet. I never used silicone because once it’s there it’s almost impossible to completely remove, especially on a porous wood floor. If the next toilet has a different footprint, well good luck. I use Dap Kwik Seal Plus clear. It is water clean up and completely waterproof. If gap is very uneven or toilet was shimmed then I would use white or biscuit to match toilet color. A bigger concern than overflow toilet water getting under toilet is it getting under the walls around toilet. Always caulk where the baseboard meets the floor and up the corner gaps a couple inches. White acrylic latex with silicone works great. My neighbor had a slow leak in the water line to the refrigerator ice maker and it went under the wall and cabinets causing $40,000 damage.
This is my first time ever replacing a toilet. We're switching to a 1-piece fully skirted unit that's taller and elongated. The detail in this video is excellent. As far as the caulking goes, I was not planning on doing it because of the reasons you identified. However, you are the only one to point out that it is required per plumbing code, so I'll make it happen. I'll either get a small tube or I'll look into a caulking tape.
perfect help for demistifying the process of replacing a toilet yourself. Followed it to the letter, and installed my own toilet and saved a bunch of money. Thanks so much!!
This was exactly what I was looking for! I’m fixing up my much neglected family cottage after my brother passed away and this was so easy to follow. I can’t thank you enough!
This was a great tutorial on how to do this. I had to replace three toilets in my home, and the first couple, I would stop and start again the whole time. Because he was so good at explaining every aspect, by the time I got to the third one, I was able to do it quickly and efficiently.
I think you have done a great job. Easy to understand. An improvement: the nut on top of the bolt that holds the toilet to the floor. That was the only problem I had when I installed my toilet, the screws wiggled around & I never did get the screw on the left lined up properly, now here I am trying again. I am sure tightening the nut to make the screw stable is going to make the difference. Thank you so much! Judie
A feller just got home in the going to town rig after picking up a new commode, and I figured I’d go ahead and do the right thing and watch a how-to vidya first, and I landed here. This is very helpful and I appreciate you making the video. I feel ready to tackle this project after a cold snack or two. Hopefully I won’t make the bolts waaaay over tight…it’s fine.
Thank you very much for a clear and very informative video on how to. I feel confident that I now will be able to install my toilet bowl successfully following your step-by-step video. Keep making more as you are good at explaining things in layman's terms.
You did an excellent job with this. The up-close camera work is spectacular. I only wish that we could have that excellent view during installations! This is sure to help a lot of people. I'm not sure if you mentioned it when you ended up caulking yours to the floor.... but my tip is "all of the above." Caulk the front portion, and leave the back open. That way you prevent the external leak problem seeping under, you add some stability and aesthetics. But the back is open to show any leak from the toilet gasket. I've seen these new rubber gaskets, but haven't yet been brave enough to try one. Yes, the wax is a bugger to clean up! But that's because it sticks so darn well. I like knowing that the thick ring (with insert for sure!) has made full contact, and then you squish it down. With the rubber, I'd be worried that I'm not getting enough compression, or seal all the way around evenly. I've never had a quality wax ring go bad, and I've never had to re-do any that I've installed.... so I don't much care what happens *next*. :-)
I was a little hesitant to replace my toilet but this video made me more confident in doing so. I thank you for the time you spent to help the diy in all of us
When I bought my house the first 2 years I couldn’t figure out why my half bath always smelled like sewer and I kept thinking it was coming from the toilet. I finally realized that there was no cocking around my toilet and once I sealed it, the odor was forever gone! Thank you so much for this amazing video. I am a 57 yr old female, have hated my toilets for 10 yrs and because I’m handy I never wanted to hire anyone who will likely charge me too much so now I have complete confidence after watching you that this is going to be a breeze! 😊
Thank you so much for this video. After I was quoted $250 for replacing my toilet ( just replacing the toilet) I decide to do it my self, so far so good.
I just replaced two toilets this week. On one the mounting flange was broken and required replacing. This was the easier one. The other one,the one that I expected to be simple turned out to be a real pain. The plumber that installed it had the flange 1/2 inch too high and it was held on by just the glue,no screws into the concrete. I had to take the new toilet back off and cut the flange off and put a low profile flange on,and properly drill and screw it secure. No more wax rings!
As per usual, you have a wonderfully produced and easy-to-understand video that de-mystifies the process of whatever you're sharing. If I may, only one item of concern and its the gasket you used in lieu of the the wax ring. Those things can have all kinds of problems, similar to the wax rings with the built-in funnels. The problem is its flexibility, and I've seen this play out time & again on toilet installs. Each time you sit on the toilet, unless you are sitting down absolutely square on the toilet, you sit down at an angle and that pushes ever so slightly backwards on the toilet. Now at first, the closet bolts are tight and its not an issue. But over time with hundreds sit-downs, what ends up happening is the toilet pushes backwards on that gasket and the flange, because it is pliable, buckles inward and partially blocks the drain, and that starts causing backups. Basically all that flexing you showed in the video of the silicone gasket is the enemy. Even though wax rings are messy, they're still the gold standard and I only install basic wax rings on toilets. There's a reason why Kohler gives you a basic one. But, time will tell. Hope it works for you with no problems. Thanks for the time you spent in making this.
Excellent feedback, thank you very much! This is the first concerning thing I’ve heard about the flexible gaskets. Will keep my eye on it for sure. Thank you!
Hey Bullmoose - since reading your comment I've gone down a google rabbit hole trying to find more information about the failure modes of waxless seals... and I can't find anything about them failing in the manner you describe. By all accounts they are pretty robust, and offer lots of advantages over the traditional wax ring - including that they can flex a bit with slight shifts in toilet positioning without losing the seal. I'm not questioning your comment, but I'd really love it if you could point me to where I can read more about a waxless seal flexing under a shifting toilet to the point that it causes a blockage. Thanks!
@@AmplifyDIY sorry for the delay in responding. Didn’t mean to send you down a rabbit hole. In terms of what kind of documentation can you find, you won’t find the plumbing forums blowing up with this problem, nor is Fluidmaster going to mention this in their literature because this is really a field issue, not a design flaw in their product. My comments above were based upon seeing numerous issues with the wax rings with the integrated funnels. What ends up getting people’s attention is that they start seeing a little water seeping out of the toilet at the floor, not full stoppages. Pull the toilet and sure enough, the wax ring has shifted and you see the funnel slightly deformed against the inside of the closet flange just enough to where when the toilet is flushed, the water is partially diverted from the center of the waste line and leaks onto the floor. (Another reason not to caulk). I want to be clear that you may have absolutely no problem with your seal for the life of the toilet. Entirely possible. I’m just saying I’ve seen this very common problem with a similar design on the integrated wax rings, and given that your gasket is silicone, it’s even less rigid than the plastic insert on the integrated wax ring. Search some UA-cam plumbers and you won’t see many of them using anything other than the good old wax ring. Probably far more info than you cared to read today! Haha. Thanks again and keep up the great videos.
Subscribed after watching this. I am the least handy person ever and I watched this and was able to do it. Even though it’s simple for some- this was a big deal for me to do. I’m proud and I owe you one 😊. Great breakdown and looking forward to more of your videos.
A true professional makes Tricky And messy jobs looks very easy... Great job sir! I wish you could have been mine K. through 9th Grade teacher, More specifically, my Shop Teacher!
Great video, very well paced and clearly explained. I caulk but at the back of the toilet leave a small 1/2 inch or less uncaulk area as an early point of notify me of a leak at the base.
First... Love the VGG cap Second... Thank you for the video tutorial, going to change out the toilet in a building we are renovating for our second storefront location.
I am seeing this video 2 years after it was posted. This is an excellent video. but one thing that I have learned to help with placing the toilet on the studs on the flange is to put blue painters tape on the floor inline where the studs are. This allows you to line up the holes on the toilet with the studs much easier since sometime the studs and holes are hard to see looking down over the toilet.
I like the metal bolts you showed. My plumber used a pair of $2 plastic ones. One of them snapped off, so now it needs to be fixed. The plumber that came today wanted to charge $495 CAD to lift and reset the toilet. That’s insane, which is why I’m going to try doing this myself. Great video!
As a certified master toilet technician [plumber] I suggest using a wet vac to get the water out of the old tank and bowl. Also, toss a bucket of water down the bowl after flushing to siphon more of the bowl water down the drain.
this guide was VERY VERY VERY helpful!!! Installed a new toilet in my house today. And the recommendation of the non-wax seal was a great call. And this was my 1st time replacing and installing a toilet. Thank you for this video.
Probably self evident, but I would add when securing the flange bolts you should make sure the head of the bolts are set perpendicular to the slot to give the most lateral strength.
Wow! This was one of the best, most thorough videos that shows every step. I, personally, am still struggling with the problem of leaks from the tank bolts. Mine are not like those you showed. They come with rubber and metal washers and a double set of nuts for each bolt. I have tightened several times but still am seeing drips from the tank bolts... 😕. Can you suggest what I might be doing wrong? I am turning water on very slowly so I don't end up with too much leakage to clean up. Thanks for your video.
Excellent video. Also, I didn't know that the heavy plunging of the toilet bowl could cause leaking from underneath it because of an inadequate seal. That is a problem that I have every now and again with the toilet that I have. I was wondering why this problem only seems to occur when I use the plunger and sometimes for a few days afterwards.
👍 Worth watching. It's a complete DIY project.
Great
I watched this video yesterday then replace my toilet after watching. I was by myself so this step by step tutorial madeit so easy for a 1 man change. I appreciate you taking the time to post this. I'm 69 and this saved my back. Thank you!
Glad it helped!
I wish I would have become a plumber. I went to college instead and what a waste of money and no passion for my job now at 54. I still love plumbing projects, although I haven't done it for 30 years and listened to all the complaints that I'm sure goes along with it, like all jobs. Love your videos.
Best simple description on how to install toilet that I’ve come across.so far.
Fantastic! I followed and today I installed my toilet, with no human help. Just me and myself.
Great job!
Thank you, thank you, thank you! For being so detailed. For showing every single step (not just telling). For considering that some people may be older or have bad backs (that's me). I'm a 63 year old woman who is trying to become more self-sufficient with chores that my husband normally does. I'm going to have this video handy in the bathroom so I can follow it step-by-step as I go along.
Good luck! You can do it!
I’ve heard that caulking the front and sides of the toilet but leaving the back uncaulked is the best of both worlds.
Step by step instructions.! Muy bien. Thanks sr. Im 62 years old and im gone to do by myself
This was excellent. Thank you. Just saved me about $400 on the 2 toilets I'm replacing myself.
Wow! Love that I found you, thank you for expending so much time explaining the caulking dilemma. I'm a subscriber now.
This video is extremely detailed, awesome job! I just needed exactly this one. Thank you so much!
Glad it was helpful!
This tutorial is amazing. I am reasonably handy but this is my very, very first time to tackle a project of this size. You offer amazing details and pointers on where things might go wrong. The video is exceptional. Was not planning on doing this project over Christmas, but my dad has the flu and my husband's arm is broken, so it's me :) Thank you thank you thank you thank you
You are very welcome - apologies for my delayed response. I hope the replacement went well for you!
I'm jealous of how perfect your rough in and supply are. Your house must be very new. I think most people have to deal with replacing toilets on older homes and it doesn't go so smoothly.
Another great video, thank you!
You are right - The variety of demons that can lurk under a toilet are large enough that I elected not to try to cover them all in this video - it was already nearly a half hour long. :)
This was shot in a pretty new home, yes. I've replaced toilets in much, much older homes though, and other than being a bit more ... gross... have not run into any major problems. *knock on wood*
Thanks for watching!
My luck runs like "most people." Any home repair or car repair I've found a video for on UA-cam generally ends up taking two to three times longer in my case. I always run into some sort of complication or gremlin. So I just factor the extra time in from the beginning. ;-) :-(
Thanks @AmplifyDIY for another great video.
Whenever I install a new toilet I tend to caulk around the whole toilet leaving about a 1" gap at the back, Best of both worlds imo it looks great and you cant notice the lil bit that is missing at the back aswell as if a leak occurs most of the times it will be able to still be noticed. I am not a professional plumber by any means tho!
This is a great approach. Thanks for watching!
à
😊😊
Praise the cleaner in this house. That's the cleanest toilet replacement ever. 😁
Thank you for this very clear description of how to do it. I'm a 64 year old woman and I've done toilets before but I always thought they were kinda hard, I'm going to be doing mine this coming week and this is very helpful.
I also love the bloopers they're always so funny on TV shows and stuff and even a guy who's putting a toilet on haha😅
ive never done this by myself am not a plumber but really have no choice as im the homeowner, thx for this video, really needed these extra details, i hope to tackle this in next week or so
Good luck!
Very helpful and thorough video. This made my one person toilet install so much easier. Especially how you explained to disassemble first. Thank you!
Great to hear!
Any tips on picking up the toilet by yourself if you have a bad back.
You are an amazing and extraordinary DIY instructor. You make it very simple to DIY beginner like me!!!!?
Wow, thank you!
Great video! Here are some things to consider. I do caulk because my Florida house is built on a concrete slab, no wood under toilet to rot if there is a leak. If house is wood frame be sure to not caulk the back of toilet. I never used silicone because once it’s there it’s almost impossible to completely remove, especially on a porous wood floor. If the next toilet has a different footprint, well good luck. I use Dap Kwik Seal Plus clear. It is water clean up and completely waterproof. If gap is very uneven or toilet was shimmed then I would use white or biscuit to match toilet color. A bigger concern than overflow toilet water getting under toilet is it getting under the walls around toilet. Always caulk where the baseboard meets the floor and up the corner gaps a couple inches. White acrylic latex with silicone works great. My neighbor had a slow leak in the water line to the refrigerator ice maker and it went under the wall and cabinets causing $40,000 damage.
Got quoted a pretty big amount to replace the toilet. Looked at a few videos like this one and I'm much more confident that I can do this!
You can do it! Good luck. :)
excellent video. really appreciated the suggestion of the "better than wax" silicone ring.
This is a superb video. Clear, detailed, thorough, and perfect for the beginner. Thank you so much!
Glad it was helpful!
Excellent! Best DIY toilet installation I have seen- great detail... Thanks a bunch!
Glad it was helpful!
This is my first time ever replacing a toilet. We're switching to a 1-piece fully skirted unit that's taller and elongated. The detail in this video is excellent. As far as the caulking goes, I was not planning on doing it because of the reasons you identified. However, you are the only one to point out that it is required per plumbing code, so I'll make it happen. I'll either get a small tube or I'll look into a caulking tape.
SUPER , AWESOME DEMO............VISUAL and VERBAL. !!!!!!!!!!!!!!!!! Dont need to say more !!!!!! Thank you so much
Great job. You have covered every details. Thank you.
perfect help for demistifying the process of replacing a toilet yourself. Followed it to the letter, and installed my own toilet and saved a bunch of money. Thanks so much!!
This was exactly what I was looking for! I’m fixing up my much neglected family cottage after my brother passed away and this was so easy to follow. I can’t thank you enough!
So glad it was helpful!
Thanks. As to caulk, yes do seal toilet to floor , but also leave a few inches at back to be a "tell tale" gap if toilet develops a leak.
Great video. You’re a great teacher!
I appreciate that!
Best DIY know how video. And the Vice Grip Garage hat and T-Shirt adds to the honesty of the advice !
A guy went ahead and did the right thing!
This was a great tutorial on how to do this. I had to replace three toilets in my home, and the first couple, I would stop and start again the whole time. Because he was so good at explaining every aspect, by the time I got to the third one, I was able to do it quickly and efficiently.
Nice job, Chief!
I think you have done a great job. Easy to understand. An improvement: the nut on top of the bolt that holds the toilet to the floor. That was the only problem I had when I installed my toilet, the screws wiggled around & I never did get the screw on the left lined up properly, now here I am trying again. I am sure tightening the nut to make the screw stable is going to make the difference. Thank you so much! Judie
A feller just got home in the going to town rig after picking up a new commode, and I figured I’d go ahead and do the right thing and watch a how-to vidya first, and I landed here. This is very helpful and I appreciate you making the video. I feel ready to tackle this project after a cold snack or two. Hopefully I won’t make the bolts waaaay over tight…it’s fine.
Don't forget to stop to wet the back-neck from time to time during the job!
Like most guys. I watched this after I installed the toilet. Good point about sewer gas, I will know better next time.
Thank you very much for a clear and very informative video on how to. I feel confident that I now will be able to install my toilet bowl successfully following your step-by-step video. Keep making more as you are good at explaining things in layman's terms.
You did an excellent job with this. The up-close camera work is spectacular. I only wish that we could have that excellent view during installations! This is sure to help a lot of people. I'm not sure if you mentioned it when you ended up caulking yours to the floor.... but my tip is "all of the above." Caulk the front portion, and leave the back open. That way you prevent the external leak problem seeping under, you add some stability and aesthetics. But the back is open to show any leak from the toilet gasket.
I've seen these new rubber gaskets, but haven't yet been brave enough to try one. Yes, the wax is a bugger to clean up! But that's because it sticks so darn well. I like knowing that the thick ring (with insert for sure!) has made full contact, and then you squish it down. With the rubber, I'd be worried that I'm not getting enough compression, or seal all the way around evenly. I've never had a quality wax ring go bad, and I've never had to re-do any that I've installed.... so I don't much care what happens *next*. :-)
Pretty simple instructions that everybody can understand. Very straight forward not so technical. Good job
Thank you, Mary!
I was a little hesitant to replace my toilet but this video made me more confident in doing so. I thank you for the time you spent to help the diy in all of us
Great video, excellent job of explaining the different steps. I will be changing out a toilet in the next few days and this video will help me.
I'm really glad you found it helpful. Good luck with your toilet!
When I bought my house the first 2 years I couldn’t figure out why my half bath always smelled like sewer and I kept thinking it was coming from the toilet. I finally realized that there was no cocking around my toilet and once I sealed it, the odor was forever gone! Thank you so much for this amazing video. I am a 57 yr old female, have hated my toilets for 10 yrs and because I’m handy I never wanted to hire anyone who will likely charge me too much so now I have complete confidence after watching you that this is going to be a breeze! 😊
What a simple, clear and professional presentation! Loved it. Now I feel confident to replace my old toilet. Thank you.
Thank you for the feedback, and good luck!
Thank you so much for this video. After I was quoted $250 for replacing my toilet ( just replacing the toilet) I decide to do it my self, so far so good.
Just replaced my toilet following this guide and so far no leaks! thanks for the help!
Thank you! Straight to the point and excellent step by step instructions!! I enjoyed that and learned a great deal
OK this was SO good. I have 2 toilets to install.
just curious... how did it go?
I just replaced two toilets this week. On one the mounting flange was broken and required replacing. This was the easier one. The other one,the one that I expected to be simple turned out to be a real pain. The plumber that installed it had the flange 1/2 inch too high and it was held on by just the glue,no screws into the concrete. I had to take the new toilet back off and cut the flange off and put a low profile flange on,and properly drill and screw it secure. No more wax rings!
As per usual, you have a wonderfully produced and easy-to-understand video that de-mystifies the process of whatever you're sharing. If I may, only one item of concern and its the gasket you used in lieu of the the wax ring. Those things can have all kinds of problems, similar to the wax rings with the built-in funnels. The problem is its flexibility, and I've seen this play out time & again on toilet installs. Each time you sit on the toilet, unless you are sitting down absolutely square on the toilet, you sit down at an angle and that pushes ever so slightly backwards on the toilet. Now at first, the closet bolts are tight and its not an issue. But over time with hundreds sit-downs, what ends up happening is the toilet pushes backwards on that gasket and the flange, because it is pliable, buckles inward and partially blocks the drain, and that starts causing backups. Basically all that flexing you showed in the video of the silicone gasket is the enemy. Even though wax rings are messy, they're still the gold standard and I only install basic wax rings on toilets. There's a reason why Kohler gives you a basic one. But, time will tell. Hope it works for you with no problems. Thanks for the time you spent in making this.
Excellent feedback, thank you very much! This is the first concerning thing I’ve heard about the flexible gaskets. Will keep my eye on it for sure. Thank you!
Hey Bullmoose - since reading your comment I've gone down a google rabbit hole trying to find more information about the failure modes of waxless seals... and I can't find anything about them failing in the manner you describe. By all accounts they are pretty robust, and offer lots of advantages over the traditional wax ring - including that they can flex a bit with slight shifts in toilet positioning without losing the seal.
I'm not questioning your comment, but I'd really love it if you could point me to where I can read more about a waxless seal flexing under a shifting toilet to the point that it causes a blockage. Thanks!
@@AmplifyDIY sorry for the delay in responding. Didn’t mean to send you down a rabbit hole. In terms of what kind of documentation can you find, you won’t find the plumbing forums blowing up with this problem, nor is Fluidmaster going to mention this in their literature because this is really a field issue, not a design flaw in their product. My comments above were based upon seeing numerous issues with the wax rings with the integrated funnels. What ends up getting people’s attention is that they start seeing a little water seeping out of the toilet at the floor, not full stoppages. Pull the toilet and sure enough, the wax ring has shifted and you see the funnel slightly deformed against the inside of the closet flange just enough to where when the toilet is flushed, the water is partially diverted from the center of the waste line and leaks onto the floor. (Another reason not to caulk). I want to be clear that you may have absolutely no problem with your seal for the life of the toilet. Entirely possible. I’m just saying I’ve seen this very common problem with a similar design on the integrated wax rings, and given that your gasket is silicone, it’s even less rigid than the plastic insert on the integrated wax ring. Search some UA-cam plumbers and you won’t see many of them using anything other than the good old wax ring. Probably far more info than you cared to read today! Haha. Thanks again and keep up the great videos.
Enjoyed video ! Learned a lot!
OMG, So thorough on this project. I will be watching this on my laptop as i do mine. Thank You.
Hope you enjoy it!
Subscribed after watching this. I am the least handy person ever and I watched this and was able to do it. Even though it’s simple for some- this was a big deal for me to do. I’m proud and I owe you one 😊. Great breakdown and looking forward to more of your videos.
Glad it helped!
Very well explained. Your are number 1 generous man sharing your knowledge. Good on you.
A true professional makes Tricky And messy jobs looks very easy... Great job sir! I wish you could have been mine K. through 9th Grade teacher, More specifically, my Shop Teacher!
Thank you 🙏🏻 for that important information. You’re a really instructor. I have learned a lot from you.
God bless you 🙏🏻
Glad it was helpful!
Great instructional video! Very thorough and covers most of the issues an installer would deal with.
Thanks! 👍
Great video, very well paced and clearly explained. I caulk but at the back of the toilet leave a small 1/2 inch or less uncaulk area as an early point of notify me of a leak at the base.
Great tip about leaving the gap, Yardmansurfer! Thanks for watching. :)
Thank you so very much. I was able to install it.
First... Love the VGG cap
Second... Thank you for the video tutorial, going to change out the toilet in a building we are renovating for our second storefront location.
Very well done Sir thank you
So nice of you!
Excellent how to video on this subject. Also like the VGG hat and shirt you're wearing.
A guy went ahead and did the right thing. :)
Awesome vid dude. Made the job easy..
thanks brother...used this vid on two toilet instals!!
Nice work!
Thank you so much! I learn a lot today!.
Excellent step by step
Thank you very much!
Good to watch whole process very.informative
Glad it was helpful!
Thank you so much you've made a fan for life, the bloopers at the end were perfect
Glad you enjoyed it!
Excellent video. Very clear step by step instructions and options for our specific situations. Thank you!!!
You are extremely helpful
The way you explain everything, I believe I could exchange my toilet.....Not a lot of none sense talking ...Thanks for sharing 😊
Thank you Cecilia - you can do it!
Thank you this was very helpful and a good reminder. I also agree 👍🏼to seal the toilet to the floor.
I am seeing this video 2 years after it was posted. This is an excellent video. but one thing that I have learned to help with placing the toilet on the studs on the flange is to put blue painters tape on the floor inline where the studs are. This allows you to line up the holes on the toilet with the studs much easier since sometime the studs and holes are hard to see looking down over the toilet.
Great tip - thank you!
Good question: can you safely add some food coloring to the tank to see where a leak might be coming from, before removing the whole commode / tank?
Great video Great help thanks
Very welcome!
I like the metal bolts you showed. My plumber used a pair of $2 plastic ones. One of them snapped off, so now it needs to be fixed.
The plumber that came today wanted to charge $495 CAD to lift and reset the toilet. That’s insane, which is why I’m going to try doing this myself.
Great video!
The plumber that came to my house today wanted $680 CAD to do the same. I kindly asked them to leave. Also why I'm here. Great Video.
As a certified master toilet technician [plumber] I suggest using a wet vac to get the water out of the old tank and bowl. Also, toss a bucket of water down the bowl after flushing to siphon more of the bowl water down the drain.
Great tips, thanks!
I watched your video on installing toilet seat. Please keep up the great job of helping self doers like myself. Thanks much.
You're welcome!
Wow! You're a great demonstrator. Thanks for sharing your expertise. 👍
Thanks for watching!
You are the best 👍
Excellent communication and great detail.
Nice job ! I will caulk on a slab but not on wood subfloor. Your presentation was clear and understandable with good tips .
Thanks 👍
Probably the best well done video I've seen on these
Thank you!
this guide was VERY VERY VERY helpful!!! Installed a new toilet in my house today. And the recommendation of the non-wax seal was a great call. And this was my 1st time replacing and installing a toilet. Thank you for this video.
Glad it helped!
Excellent video, great information and really good videography
Much appreciated!
Amazing video! Thank you!
Glad you liked it!
You are very good and right to the point.
Thank you, very very helpful!
Glad to hear that!
Outstanding! Thank you!
You're very welcome!
Probably self evident, but I would add when securing the flange bolts you should make sure the head of the bolts are set perpendicular to the slot to give the most lateral strength.
Great tip!
thank you. learned something and cant wait to apply what I learned in the next few days
Great video thanks!
Thank you! I feel like I'm ready to do this on my own after watching your video!
Wonderful!
Magnifique, il n'y a rien à ajouter, j'ai tout , tout compris!..( thank's and congratulation)*****
Je suis très heureux d'apprendre que cette vidéo vous a été utile. Merci d'avoir regardé!
Awesome job made it easy to understand. This will be a project. I will be tackling. Thank you again.
Glad it was helpful!
Great presentation - very clear - thanks
Badass tutorial, thanks for being the dad I didn’t have.
Excellent video, detailed yet simple description. Thanks a lot!
Wow! This was one of the best, most thorough videos that shows every step. I, personally, am still struggling with the problem of leaks from the tank bolts. Mine are not like those you showed. They come with rubber and metal washers and a double set of nuts for each bolt. I have tightened several times but still am seeing drips from the tank bolts... 😕. Can you suggest what I might be doing wrong? I am turning water on very slowly so I don't end up with too much leakage to clean up. Thanks for your video.
I'm glad you like the video. Are the rubber washers new? Are you certain you've assembled everything in the correct order?
Wow! What a through explanation. Thank you!
Excellent video.
Also, I didn't know that the heavy plunging of the toilet bowl could cause leaking from underneath it because of an inadequate seal. That is a problem that I have every now and again with the toilet that I have.
I was wondering why this problem only seems to occur when I use the plunger and sometimes for a few days afterwards.
Probably time to replace the seal under your toilet. Good luck!