Very impressive build. The drywall mud made an easily shapeable base which worked great because you were only making the buck from which the boat parts got molded. Working smarter, not harder.
Yeah u def want to mask up for this maybe not other things but sanding that? Look at ur csr hood it is fine particulate and floats into and on everything. Other than that which is your choice by all means, looks like a cool build
@@custombuildsonly3909 a 6hp motor would be enough for sure. I run a 6hp on my inflatable boat. alone i reach 25km/h easily. if it was on your kayak 30km/h for sure
А в чём смысл таких обводов? На глиссер лодку не вывести, идёт в водоизмещающем режиме, соответственно не поураганить. Подругу не покатать - места нет. Работа ради работы (видео)?
Verry Impressive my Man You Put a lot of Work Into it , One Thing Tho Ive Always thought of Putting a Jet Ski motor and jet Unit , in a Little boat like that Mabye Next time try that Direction Well Done
Looks great, but the motor should have been mounted slightly lower. You’re losing a lot of power because the prop sticks slightly above the water it looks like. What a cool boat!
When he shows it in the garage it actually looks a little too low. Could be the camera angle but either way you loose significant power from being too high or too low. Still a stellar build!!
@@custombuildsonly3909I had a similar boat with a 30hp motor It was very fast and stable in pretty rough water …. Until I slowed or stopped! The weight height of the motor made it scarily unstable unless powered on!
Great job bro super cool! Do you know what kind of kayak you started with? Like the brand or company name? Dimensions maybe? I've been looking for something similar to do the exact same thing! A sit in motor kayak with steering wheel. Hope to do as good a job as you did
I am trying to use fiberglass over foam but i hadn't much success the fiberglass melted the foam. it destroy the boat I was building out of foam. what did you spray over the gyps coating do it protect the foam from the resin ?? What do you suggest to put on the foam if i want to fibreglass it
Hmmm for sure it will melt it. You could use epoxy resin that is used for carbon fiber, that doesn't melt it. But what I did was spray the gyps coating with primer paint that is used for cars and some hardmetal filler spray. Or else you could cover it with some layers of tape
That Kayak got Pimped! #CoolBuild
Very cool boat, and looks like so much fun to drive! Love the color scheme too, thanks for the great video!
I’ve fiberglassed the interior of 4 boats and really enjoyed seeing your creativity in mold making. New to me 🤔🤔🤔
You should be selling skins made from the mold for other enthusiasts to build on, and even completed versions - looks great man
@@sixxgunz3774 yeah the only problem is time haha cause I'm always doing a different project😅
I’m very impressed with your work.
Very impressive build. The drywall mud made an easily shapeable base which worked great because you were only making the buck from which the boat parts got molded. Working smarter, not harder.
Loved the build & the video! Great application for electric too.
Great work guy, but do yourself a favor and wear a mask.......you will live longer.
Just hold ur breath when grinding and sanding and take a breath when u stop. Same as with welding Just use the good old safety squint! ;)
@@michielpoortvliet3003 exactly hahaha old school techniques 😏
Oh man. Just into this and I thought you was wack with a 500lb kayak of bondo.. then you popped the skin off and blew my mind! F yeah your the dude.
Absolutely great job I appreciate your work.
Oh yeah! A Lake Merc Cruiser. I got a old wave runner that would make a awesome jet drive project for something like this.
Yeah u def want to mask up for this maybe not other things but sanding that? Look at ur csr hood it is fine particulate and floats into and on everything. Other than that which is your choice by all means, looks like a cool build
Very nice job.
this was sick! great job!
Very nice build 😊😊😊greetings from Germany
This dude has building knowledge,quite interesting!
Nice build
My first car was a Mini panel van, 74, $400 Australian dollars, Great Great car.
This thing is pretty damn cool! I want one!
Good for you lad have a blast
Amazing content awesome work and music very talented 🎉🎉
Except it's a boat not a kayak
Travail d'orfèvrerie bravo en tous et fière jolie je pense tableau ar renforcer bracon de soutient un petit Mercury 400xr❤ 😅 béllissimo
Cool AF!! 👍👍
It would have been nice if you made a step by step instructional video for learning purposes. Nice build
how cool is that!
excellent Boat Sir and video
Super, bravo
Parabéns 🎉🎉🎉 Congratulations 🎉🎉🎉🎉
Great job making that boat, but its way to small. Only made for one.
good job
That thing is perfect
Great job, now lets get a bigger motor LOL !
@@masonryjoe yeah haha a jet drive with a jet ski engine to lower the centre of gravity and for power obviously😁😁
@@custombuildsonly3909 That would be sweet !
@@custombuildsonly3909 a 6hp motor would be enough for sure.
I run a 6hp on my inflatable boat. alone i reach 25km/h easily. if it was on your kayak 30km/h for sure
А в чём смысл таких обводов? На глиссер лодку не вывести, идёт в водоизмещающем режиме, соответственно не поураганить. Подругу не покатать - места нет. Работа ради работы (видео)?
Your ancestors would be proud.
Godjob
Needs a 25 horse
Verry Impressive my Man You Put a lot of Work Into it , One Thing Tho Ive Always thought of Putting a Jet Ski motor and jet Unit , in a Little boat like that
Mabye Next time try that Direction
Well Done
Yepp that's what I intend to do in the future is to remove the outboard and fit a jet drive. Thank you for the comment much appreciated 😊
🔥👍👍👍
Нужно было 2х цилиндровый водомёт поставить или мото весло
take my money
Looks great, but the motor should have been mounted slightly lower. You’re losing a lot of power because the prop sticks slightly above the water it looks like. What a cool boat!
When he shows it in the garage it actually looks a little too low. Could be the camera angle but either way you loose significant power from being too high or too low. Still a stellar build!!
@@OptimusMatrix no it's perfect cause I tested it at different hight adjustments. It looks high cause the kayak has a shallow stern.
@@custombuildsonly3909I had a similar boat with a 30hp motor
It was very fast and stable in pretty rough water …. Until I slowed or stopped!
The weight height of the motor made it scarily unstable unless powered on!
Он запускал мотор без воды и газовал ещё?😂😂😂😂
No no man it was in a bucket of water it doesn't show in the video you think I'm crazy hahaha 😂
@@custombuildsonly3909Никакого ведра нигде не видно. А ещё не видно контрольной струи воды , которая должна была литься на пол.
...lassu.😂
Def need a 8hp or 15
Great Work but it is No kayak anymore, it's a boat 😁
A kayak is a boat.
That was never a kayak to start with
Australia Weekend Pert look Cafe Music 😅😊
Looks like shes ready for a 25hp Mercury!😂
@@High-Alpha hahah it would sink for sure. A jet drive with an inboard engine is the way to go maybe next year
Hmmm...
Needs more cowbell
Big Man looks like Factory product
It is the stone
#trendingnow
Great job bro super cool! Do you know what kind of kayak you started with? Like the brand or company name? Dimensions maybe? I've been looking for something similar to do the exact same thing! A sit in motor kayak with steering wheel. Hope to do as good a job as you did
@@HHC808 it's an old company from the 80 in Malta that used to do the kayak I used for the base
😊😊😊😊😊😊😊😊😊
LFG!
All that dust no mask...come on dude think of your lungs your health
True true but I do wear a mask when cutting fiberglass
Some people like dust, give him a break
I feel like you need to re-power that hot rod
Nobody gets out of here alive
Freedom loving?
Next step: Room service
whats name of this song buddy its pretty catchy nice project by the way love your construction
@@fabianbird4584 waiting for the summer, in the end and left hand free I think they are in the video description. Thank you btw much appreciated 😊
He used the kayak as a mold.
i reat job!!!! can you tell me what materials you used in video
Thank you for your comment 🙂 yes I used gyps coating to form the shape of the model and then fiberglass
i see its a car body shop but same question
cool i pute float pods on mine so i dont get swamped when im starting the motor dead in the water
What would you do if you take up water?
Swim
@@bilalmeziane yepp hahah swim. It won't sink cause I filled it with pockets of expanding foam and the back is all sealed storage
how many HP in the engine and what kind of plaster you used?
The motor is a 4hp mercury and I used "Crown" gel coats for both the mold and the finished kayak.
@@custombuildsonly3909 you did a awsome job congratulations!!!
I am trying to use fiberglass over foam but i hadn't much success the fiberglass melted the foam. it destroy the boat I was building out of foam. what did you spray over the gyps coating do it protect the foam from the resin ?? What do you suggest to put on the foam if i want to fibreglass it
Hmmm for sure it will melt it. You could use epoxy resin that is used for carbon fiber, that doesn't melt it. But what I did was spray the gyps coating with primer paint that is used for cars and some hardmetal filler spray. Or else you could cover it with some layers of tape
polyester resin melts foam. have to use epoxy resin. i've used MAS epoxy with fast hardener for years with good results.
You can use PVA glue on top of the foam, that will isolate the foam from polyester.
that thing is awesome!!!! but for god's sake man wear a respirator or a good mask when you sand fiber glass
nice build, the music is wack though
As soon as you put any kind of motor on a kayak, canoe, or rowboat, you'll need a licence, even if it's a wind up elastic motor !
@@Incognito-fe8cw not in Malta brother, from 30hp up you need a license.
epoxy gelcoat vs acrilic?
Nah, only the windscreen is acrylic from the whole build
It needs at least a 25 hp to make it faster and fun! It’s to slow!
@@jimmycline4778 yep I'll fit a jet ski engine and jet drive in the future for sure but for now it's ok as is. It reaches 13.5knots so not that bad
Stick a 50cc on there 😅
Hilarious comment when he already have a 102cc on is boat …. When you dont know what you are talking about…
@mozzyviator2939 I mean 50hp sorry my bad.
What music?
All that to go 8 mph?
no, all that for a feeling of accomplishment and stepping back and looking at it and saying to yourself, "I built that with my own hands"
I get that but creating something useless is not a accomplishment it's a waist of time
25km/h till now, in the future you wait and see
@@AlexBerezovskyJr yeah, thank you for the comment bro much appreciated
@@M-mj8bd jealous that you don't know how to make one😂😂😂😛
A motorized kayak? You mean a small boat?😂
why did you ad to the hull and make it heavy?
@@tucanman9775 cause it wasn't lifting the back end to get on plane so I added does fins
Nothing about that vessel is a kayak.
I would watch the video but decided not to because music.
Turn sound down and watch .
To all the people who say put a 25 hp motor that is way to much it would be better up to 10hp
@@Goober481 and that would also be too much cause of the weight and engine placement. Best is to put an inboard with a jet drive
Шляпа
Kinda slow
@@lonewolfwildernesssurvival9443 yepp it only reaches 25km/h maybe in the future I'll fit a jet drive
Ну и дерьмо столько времени убито