Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
@@1989hainoki Good point! He really should be more conscious of personal safety if he wants to endure! Wearing out and damaging one's body through heavy work, or dangerous procedures is very real. It doesn't need to be a catastrophic accident, but damage that builds over time. Cheers!
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
Дружище Ты просто красавчик. Твои лодки Очень интересно смотреть они быстрые и красивые! Продолжай в том же духе! Скоро надеюсь будешь строить огромные красивые яхты! Привет тебе из далёкой России!!!
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
@@lamlaituau2446 ko giúp cho xã hội lắm bác, tại được 7tr view kiếm vài chục củ xong đi mua nhà mua đất cho họ thôi, giúp cho mình ko biết xong chưa đã nghĩ cho xã hội :D
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!! Yet another awesome video my friend! God bless you ❤❤❤
Yhooo this guy is amazing. This level of craftsmanship I have never seen before. Minimal tools yet that don't limit his quality of work. Good job man good job
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on UA-cam asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
The Vietnamese have become a manufacturing powerhouse. I own a guitar amp from a UK manufacturer built in Vietnam, and its flawless . This guy is a good example of their ingenuity on an individual basis …. Imagine a whole country of these people
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
Nice boat Mr Ho. My first time watching your channel - and now a subscriber. Excellent job on the build , truly a man of many talents Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something - Well done again Mr Ho .... I'm off to watch some more of your videos... ☘️
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :( Best wishes!
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Jf
wont be able to see in a couple of years if he keeps using his hand as a welding mask
@@1989hainoki Good point! He really should be more conscious of personal safety if he wants to endure! Wearing out and damaging one's body through heavy work, or dangerous procedures is very real. It doesn't need to be a catastrophic accident, but damage that builds over time. Cheers!
Awesome 👍
@@1989hainokiwe dont have those in vietnam
One of the best youtubers around, Mr Ho never ceases to amaze !!! Can't wait for the next video, more please ;-)
Amazing project and skill. You are very talented and your video build was excellent. Great job and thanks for sharing.
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
This is impressive to say the least! Sounds like a absolute beast!
I built boats for 20yrs still to this day we use fuck all tools a grinder, sandpaper, orbit sander, drill and thats about it.
@damianmurray1792 hats off to u man! That's freekin awesome! Very cool skill/ knowledge to have..
This guy is a mechanical genius.
Minimal? Drill press, lathe, arc welder, plasma cutter …
Дружище Ты просто красавчик. Твои лодки Очень интересно смотреть они быстрые и красивые! Продолжай в том же духе! Скоро надеюсь будешь строить огромные красивые яхты! Привет тебе из далёкой России!!!
Очень долго не было Вашего видео 😱. Ещё раз скажу, Вы гений. Очень интересно смотреть Ваши работы. Однозначно супер 👍👍👍
Well, not a genius, just a bored man with a lot of money
😂
@@maryjane-jq1cwа ты гений без денег? какую лодку сделал ты?
@@maryjane-jq1cw I think you are Jealous 😂😂
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
Rryryrrrryitryrrgfuuy
How much to buy one ???
❤😮
😮❤
Очень интересно получилось! Классно, без лишних слов, всё по делу! Удачи и процветания вам в вашем хобби!
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Việt Nam không cần chúa bảo vệ
U did what us regular people wish we could! Good for u brother!
You just became my first non-English speaking channel subscription! Great work!
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
You should make the seating how they sit in f1 cars then produce a bunch of them and sponsors a race, it might catch the right eyes
U know ur thing
Круто! 👏👏👏👏👏👍👍👍🔥👏👏👏браво, аж самому захотелось прокатиться!😅😅😅😅😅😅👍👍👍👍👍👍
Việt Nam rất tự hào vì có một người tài giói sáng chế như bác
Cái này có giúp ích j cho xã hội ko,vớ vẫn lại bị cấm
@@lamlaituau2446 lai san si ko bo dc :)
@@lamlaituau2446vậy bạn hiểu thế nào là giúp ít cho xã hội?thấy bạn bình luận như vậy là biết bạn là người k ra gì rồi
Cái con chó ăn cức này nửa, ko dc như họ cái ganh gét à 😂😂😂, tội quá😮@@lamlaituau2446
@@lamlaituau2446 ko giúp cho xã hội lắm bác, tại được 7tr view kiếm vài chục củ xong đi mua nhà mua đất cho họ thôi, giúp cho mình ko biết xong chưa đã nghĩ cho xã hội :D
Glad to see you are still at it Mr Ho! You will always be one of my hero’s. Another great job Sir!
Always impressive to see the little speed monsters you craft!
That's pretty cool Mr Ho. The smile on your face after the last run, says it all 👍😊
บารมีที่ขลบ9
Tài năng thực sự. Không chê đc điểm nào. Mình mê luôn mấy con thuyền và cano
У меня нет слов , это просто фантастика ,у тебя золотые руки!!!
Can you imagine how much stronger it would run with proper expansion chambers?
It would be sick. Good job my man .
Or if he port matched that exhaust, Jesus Christ that was rough
@@BikingVikingHH yes and pipes it would scream, I dedicated 17yrs to the high performance 2 stroke industry and enjoyed every day of it.
You are certainly a fabrication and mechanical genius as well as a highly skilled and knowledgeable Craftsman! Brilliant!
These builds never get old
Just EPIC . You're a professional car , boat , bike or whatever you get your hands on . 💯❤️👍🙌
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!!
Yet another awesome video my friend!
God bless you ❤❤❤
Yhooo this guy is amazing. This level of craftsmanship I have never seen before. Minimal tools yet that don't limit his quality of work. Good job man good job
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's all you do is comment
😊
Good! Hi
This guy is second to none. Brilliant in everything he does. First class work.
I was missing you Mr Ho! Excellent build, congratulations!
Recently bought my self a medium mini speed boat and watching this is just fascinating, beautiful work
Quá đẹp lần sau anh phải chế Hai người ngồi thi một đôi đi ngắm cảnh mới vui
J'attends toujours avec impatience les nouvelles vidéos ! Beau travail (comme d'habitude)! Merci beaucoup ! 🤗 👏👏👏
He’s back! You make it all look so easy. Super inspiring stuff. Gotta turbocharge one of these engines!
Нереально крутое видео! Светлая голова и золотые руки! 👍
That boat rips! Congrats on the build, she's marvelous!
Amazing I enjoy watching people build something from many different parts.
I don't know when I first realized that you guys totally knew what you were doing! I'm enjoying this the boat really looks great!
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
Kinda nice when they just build and don't have to talk about losing the shop every five minutes
Sometimes to make things perfectly we take a hassle when we can make things easier.
That's what because they make things for business an justify the price with the effort,but when it's a personal project,it can be done simpler.
He's got pretty well calibrated eyeballs
saya dari indonesia sangat suka konten ini , boleh saya bertanya itu memakai mesin bekas apa ya tuan Ho 🙏
A beautful craft, awesome work as always!
I would pay for this build ! Amazing work!
Nicely done. I am inspired to build my own now!
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
Can I tell you how awesome your work is when I clearly have not finished the video?
Hi Mr Ho! I'm new fan from Spain.
Just want to say that your work is awesome!!! 👏🏻👏🏻👏🏻
We are waiting for the next surprise
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on UA-cam asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
Old school craftsmanship nice job💯💥💣👌✌️🤘👍👍👍
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Did you see how he molded the hull? Impressive.
Love your builds. You're a youtube treasure bud!
That is absolutely awesome. If I had the money I would fund you to build custom mini boats like that.
My friend you are definitely blessed.
This man deserves best UA-camr award. He is a genius. He has idea talent . Amazing.
The Vietnamese have become a manufacturing powerhouse. I own a guitar amp from a UK manufacturer built in Vietnam, and its flawless . This guy is a good example of their ingenuity on an individual basis …. Imagine a whole country of these people
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
Kênh như này lẽ ra phải được vinh danh lên đài truyền hình quốc gia 🇻🇳👍
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
You have earned all my respect and admiration for such remarkable skill. Congratulations, you are a true artist! 🌟
🇧🇷🇧🇷🇧🇷🇧🇷
Damn man, I'm impressed as hell. You have some very high level skills. What a great little boat.
Em là Phan cứng của anh nhiều năm nay video nào anh ra là em coi hết 😊 chúc anh trai càng ngày càng thành công trong tương lai 🎉❤
Классный аппарат получился!👍🏻
wow! As a tool maker, I am super impressed! Skills 100%
Cháu trai Giỏi toàn diện ❤❤❤
Giởi từ cơ khí tới phần máy.. Gia công thân thuyền.. hoàn thiện, ÐI dây cũng gọn gàng 👍👍👍
Kênh càng ngày càng làm giỏi !
Đồ làm vỏ ca nô đã có khuôn Composit khá chuyên nghiệp !
Love it brother I always look forward to your project. Keep it 👍
Гениально 👍🎈руки растут из правильного места😊
That jump out of the water launch is amazing!! Well done sir!!!
This guy is excellent! That craft should be in the next James Bond movie
This guy should have aleast 1Million subscribers by now.
Awesome work 👍👍
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
Keep it up Mr.Ho, one day you Will have your own factory..😊
You are amazingly skilled in every way ! Awesome work. Please keep on going !!!
it's a pleasure watching you do what you do
Mr. Ho is so cool!!! Wish my parents were like that!😃
Nice boat Mr Ho.
My first time watching your channel - and now a subscriber.
Excellent job on the build , truly a man of many talents
Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something -
Well done again Mr Ho .... I'm off to watch some more of your videos...
☘️
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Love the "that looks about right" approach!
Great video and super boat. Great to see a no nonsense approach to building excellent boats.
Wow, very powerful for such a small boat! Nice design and construction! You are a good engineer and fabricator!
Super nice, I think you could sell these as fast as you can build them Great job
Классная работа, Поздравляю, Молодец! 👍🏻😊
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :(
Best wishes!
Came here to say the same thing!
DITTO !!!
Крутой миникатер, еще и быстрый! Молодец!
Love the sound of that triple.. You had it perrring like a cat. Running top notch. Great vid and build !! Cheers !!
Bạn rất giỏi.giỏi về động cơ lẫn cơ khí.trên cả tuyệt vời 🙌
Anh mải là đỉnh cao vược ngoài mong đợi ❤
Awesome build! Expansion chamber on your exhaust would give you 2X the power! You're slowing yourself down for no reason
I was wondering too why he made it with sraight pipes!😮awesome build anyway.
W O W!!!! That is Awesome! That looks like it is seriously fun and seriously fast! Well done Sir, Well Done!
Dang !!? That thing scoots !!! Very nice build!!! 🇺🇸👍🙋♂️🖖🏻
Your genius never ceases to amaze me!
Một công việc tuyệt vời khác Mr Ho, xứng đáng là một kỹ sư, Bravo
Great boat Mr Ho
Would like to see a video of how you made your dock, or Jetty. That looks great
You know your good when you make that all look so easy
All this work with a welder, handtools and a metal lathe.
Man that looks fun!! Great build!!
I really wish I could come to Vietnam to see all of your work in person
Обалденный вариант, молодчага🤝🤝🤝 так держать себя всегда✌✌✌✌✌
Nice build Ho.👍🏻
Отлично ! Mr Ho, нужно осваивать технологию подводных крыльев. Это следующая ступень.
Уважаемый, Вы сами до какой ступени дошли?
Seeing is believing...what a talented young man...keep it up!
I would captain that over a jetski any day....Awesome build...✌️😎
Amazing build. Only comment I have is I would have laid up several more layers of fiberglass and put in some additional wood in key stress areas
Stringers
@@LifenSantaBarbara Yup
Great job. I'd like to see expansion chambers on each cylinder for your exhaust. You'd get crazy mid and top end pull. 28:34
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.