HORROR SOUND MACHINE PART 2 - MAKING THE SOUND BOARDS AND GUITAR NECKS FOR THE APPREHENSION ENGINE
Вставка
- Опубліковано 20 лют 2021
- If you’re interested in building this project, check out the links below of the items I used in the build (not all items are exactly what I used, but are similar)(affiliate links do help support the channel!):
Irwin 6” Bar Clamps amzn.to/3jAMkIo
Irwin 12” Bar Clamps amzn.to/2JexI5d
Irwin 24” Bar Clamps amzn.to/31ONkTi
Irwin 6” Quick Grip Clamps amzn.to/3kAYW3M
CA Glue Medium amzn.to/3mtUnsB
Acid (Glue) Brushes amzn.to/2HDgXzZ
Hide Glue amzn.to/3bKZLFp
Bosch Palm Router amzn.to/34zyh1N
Dewalt 20v Cordless Drill amzn.to/34BrmoS
Dewalt 20v Oscillating Multi-Tool amzn.to/2LIlDXt
Dewalt Jigsaw amzn.to/3kN134o
Drill Press amzn.to/3jB78Q0
Machinist Square Set amzn.to/2HKUmkI
Combination Square amzn.to/3oujCwR
Stanely 24” Level amzn.to/35CuVdK
Forstner Drill Bit Set amzn.to/3jxSqcQ
Adjustable Hole Cutter amzn.to/3aWFydP
Feather Board amzn.to/3jxAkYb
Osborne Miter Gauge amzn.to/2TtslAP
Stacked Dado Saw Blade amzn.to/3e8Pcvk
3/4” Screws amzn.to/3aexkik
1” Screws amzn.to/3qhgBAh
Guitar Tuning Pegs amzn.to/3d3fOiI
Upholstery Tacks amzn.to/3qg3ijI
Dust Mask amzn.to/2HKbass
Dewalt Safety Goggles amzn.to/3jImhiV
Ear Plugs amzn.to/2HKztGn
Here is a list of other tools in my shop I used (I am not affiliated with these):
Grizzly G0771Z Hybrid Table Saw www.grizzly.com
In this part 2 of building my version of the apprehension engine I will be putting most of the sound boards in and making and installing the guitar necks. I will finish up this project in part 3.
Great videos. Ever build a fly through bird feeder? I looked through your videos but only saw birdhouse. Wife wants one. Very insightful stuff for us novices!!
sweet job
Thank you.
Looks great. How large was the 1/16" ply you found at Hobby Lobby?
I believe it was 12" X 24"". Of course there is no guarantee that they will have it now. Thanks for your comment.
@@AndersenWoodCrafts Yep. I checked and they didn't have it. I can get it online. Did you use the same 1/4" ply on the sides as the bottom?
@@Feldspar__ As with most woodworking projects it is your project so use what you want. I believe I used 1/4" on the sides and back, but you could use 1/8", I would not go below that myself. Thanks for the question and comment.