Blacked out leather interior and mickey Thompson bullet hole wheels plus a slim line to the body custom front bumper would make this truck look stout and mean. Signed TJ from Missouri 👊🇺🇸
Not Bad, Definitely gotta keep the bumper. I would do a 4 or 5 inch lift, 16x10s or 16x12s on 33s or 35s. Give is a little wider stance for the rear just because a flat bed with stocks always looks like it skipped leg day lol.
Ohhhh no, looks like I’m going to be spending more money on merch. I think the leather interior would look good. I think you should try to put a ranch hand on the front bumper with the flatbed, I’d like the look of that but that’s just my opinion
Id say make it a good work truck for some one keep the stock wheels and tires on it and just finish where he left off on the interior. but also id check to see if you could raise the truck any and get that rear wheel farther from that bed
An interior like the red single cab 2nd gen you did would look great in the truck. I also like the original seats it has in it right now where it’s says LARAMIE SLT stitched into the seats.
Nice buy bro.. interior looks great, cant wait to see what route you decide to go with that. What do you think about an single din flip out, lift, 22x14 chrome & 355 nittos? Loving the content brotha, tell the wife we said thank you for all she doing 🙏🏽.. be blessed
love the new truck, for wheels do 18x9, with mudhog tires, you would not regret getting mud hogs, they are amazing in mud, snow, rain, dry, towing, etc.
I say if your only gonna level the new truck go with 33s otherwise 35s if it's lifted. Ranchhand bumper would be cool but also like the look of the one it has now. As fair as interior maybe do like a black and gray or black and white camo theme with the seats and dash. I think it would be an interesting experiment! Looking forward to more content!
I just bought a 1st gen ram w150 yesterday it's my first ram I paid $400 for it. It don't get spark so I gotta figure out why. Also it has a hole in the floor on the driver side but it should be fixable
I was wondering why you haven’t put another wrap like you did on the new dually you gave away along time ago or you just haven’t found the right truck again
On the new flatbed I would do a 4th gen leather interior and the 4th gen steering wheel and I would put like a 4 inch lift on it and then it different wheels and tires on it and Mabey paint match a 4th gen bumper with light bar in bumper
The bed could go towards the cab a whole lot more and that would clear your tires from your box a lot better. To me the gap between the front of the bed and the back of the truck is to much and looks bad.
Twin turbo/gauges and new 33 tires leave The paint and interior and giveaway 10,000 instead of 5,000 it’s an Nice clean work truck not a show truck don’t make it something it’s not.
Yes that make sense don’t waste money on Leather interior or paint the person that wins that truck is going to use not look at it going to get dirt and dented put the extra cash in winner pocket
Already made some progress on the truck today! 🤞 Stay tuned for Friday’s video!
We post every Monday, Wednesday, Friday!
Do sport front end swap
Ranch hand front bumper and add air bags to rear end like nasty red. Then like you said 16x9 or 10s
Blacked out leather interior and mickey Thompson bullet hole wheels plus a slim line to the body custom front bumper would make this truck look stout and mean. Signed TJ from Missouri 👊🇺🇸
Not Bad, Definitely gotta keep the bumper. I would do a 4 or 5 inch lift, 16x10s or 16x12s on 33s or 35s. Give is a little wider stance for the rear just because a flat bed with stocks always looks like it skipped leg day lol.
Ranch hand bumper, dually conversion and leather interior.
Those bumpers are ugly af
#NotificationSquad #TeamLNP Get a heavy duty bumper like Fab Four bumpers or Ranch Hand, a unique custom interior 👍🏼
Go with the 16” wheels and 33”s...and add a Ranch Hand front bumper! Work truck all the way!
Killer find! I think it would look killer with an aftermarket front bumper with a bull bar :-D
Ohhhh no, looks like I’m going to be spending more money on merch. I think the leather interior would look good. I think you should try to put a ranch hand on the front bumper with the flatbed, I’d like the look of that but that’s just my opinion
I love the idea of the leather interior! It would look so good with a level kit and some wheels
same
Ranch hand bumper, leather interior, the nicer 17” 3rd gen stocks and 35s
Hell yeah see if you can try to use that saddle leather again
Upgrade the bumper for sure. Leather for sure. What about adding more chrome to match the boxes. Air bags in the back like red.
@loud’n’proud please please please do a ranch hand on the front of that thing!! 16x9 pro-comp vintage 69’s
Put a ranch hand full replacement bumper on it just make it a nice tow rig
Love it, definitely leather. Would love to see a ranch hand style bumper on it.
Id say make it a good work truck for some one keep the stock wheels and tires on it and just finish where he left off on the interior. but also id check to see if you could raise the truck any and get that rear wheel farther from that bed
An interior like the red single cab 2nd gen you did would look great in the truck. I also like the original seats it has in it right now where it’s says LARAMIE SLT stitched into the seats.
Nice buy bro.. interior looks great, cant wait to see what route you decide to go with that. What do you think about an single din flip out, lift, 22x14 chrome & 355 nittos? Loving the content brotha, tell the wife we said thank you for all she doing 🙏🏽.. be blessed
love the new truck, for wheels do 18x9, with mudhog tires, you would not regret getting mud hogs, they are amazing in mud, snow, rain, dry, towing, etc.
Vinyl blk floor leather seats. go with 18x9 modular aluminum rims withLT295/70R-18 tires with a129Q LOAD INDEX FOR TOWING CAPIBLITIES.
Dude 2 thumbs up on the new truck! Love it, flatbed all the second gens 🤣🇺🇸👍
Leather interior is definitely the way to go on this 2nd gen. Can’t wait to see these upcoming videos.
I say if your only gonna level the new truck go with 33s otherwise 35s if it's lifted. Ranchhand bumper would be cool but also like the look of the one it has now. As fair as interior maybe do like a black and gray or black and white camo theme with the seats and dash. I think it would be an interesting experiment! Looking forward to more content!
Ranch hand type bumper would look sweet on that 12valve
I just bought a 1st gen ram w150 yesterday it's my first ram I paid $400 for it. It don't get spark so I gotta figure out why. Also it has a hole in the floor on the driver side but it should be fixable
Leather interior!!!different bumper with winch!!
Black diamond plate steel bumper with a winch
Nice truck, I'd go with a new front bumper that somewhat matches the bed and the leather interior.
Sweet video love 2nd gen flatbed trucks you should do power upgrades like nasty red minus the transmission 👍👍👍
One more truck and looks great yes do the leather interior
Custom interior, after market front bumper to go with bed, 16x10s and a 4in lift
Ranch hand front bumper and maybe a little lift but not too much. And a long horn style interior
Yesss do 16x10s. Just a good old school look
A ranch hand bumper would be absolutely sick
Looking forward to seeing the build
Need to put ranch hand bumpers on every truck you get
I was wondering why you haven’t put another wrap like you did on the new dually you gave away along time ago or you just haven’t found the right truck again
Cut the wheel fender out of the bed to run wider and larger wheels and tires. It looks weird with wheels tucked under.
I’d love to see a move bumper with a wrench on it
You should put a iron cross bumper on the new truck and a new leather interior for it to that would be sweet.
Nice truck!! I would give it a lift and go wider tires, still would be useable but would look amazing!!!! Good video 👍
On the new flatbed I would do a 4th gen leather interior and the 4th gen steering wheel and I would put like a 4 inch lift on it and then it different wheels and tires on it and Mabey paint match a 4th gen bumper with light bar in bumper
I would set it up like Nasty Red. And definitely leather interior would be cool
You should do a after movies Bumper with a push bar
The bed could go towards the cab a whole lot more and that would clear your tires from your box a lot better. To me the gap between the front of the bed and the back of the truck is to much and looks bad.
We all LOVE Grandpa's Truck !! Don't ever Sell it !! UNLESS you give it away as a Giveaway !!
can you make a video on what you ask guys on facebook marketplace before going to look at it ?
You atta do an off road bumper like a ranch hand or something would be pretty cool
Hey man that's cool doing that with your grandpas truck I know how it feels I just lost mine too and it's the worst feeling ever
seats look decent shape but it would look alot nicer if they were re-covered / leather
It def needs a small lift not to much to cause issues towing.
Wow to sweet bro I love a good deal 🤩💯
Leave the interior cloth. Put a lift on it. Buy a heavy metal black front bumper with a winch in the middle of the bumper
Compound turbo setup like the nasty red has since there almost identical trucks in layout. 🤷
It's all back sweet truck put a ranch hand bumper grillguard on it would look sweet!!!
you need to keep a truck thats yours...like i had mine for 15 years and i still love it...like keep one thats your own and keep it lol
Do the seat like u did the resto gen blue truck those was nice seats
How about a 4th gen bumper conversion
You got yourself a very nice truck, just repaint the plastic on the bumper or fourth gen bumper
Id love to see like a harley davidson theme or a long horn conversion \
Would be a cool build if you turned it into a dually
I would definitely do leather that would look awesome
Good looking truck
Put a ranch hand bumper on it
I’d do 22/12 black and mild on 33/12.5 At’s
4” lift 20” deep dish
Sport front end for sure
Some 17x10s and 33s plus some black leather
at that same stop sign my dad broke the main shaft in a nv4500 and had to cost into that gas station
❤️ THAT FLATBED LOOK 👍👍👍👍
That’s a cool truck
I wouldn't hold a pressure washer that close to the paint. Especially on a Chrysler. They have the thinnest paint
i wish i could find deals like that i need a truck desperately myold 96 bronco on her last leg
Nice!
I think you underestimate the towing power of stock cummins
Nah man… I just know how nice it is toeing woth a built one and I wouldn’t want it to be stock 🤣
Sweet truck bro
Definitely go leather& do a black headliner .
A long horn style interior would be sweet
Cut some fender wells in the deck. And slap some 12 wires on and call it a day. Maybe a aftermarket front bumper too
No don’t cut in fenders it’s a nice looking bed don’t hack it up and ruin the paint so it can start to rust in a year
I’d do leather and some 33s with 9 wides
Man I’d take those toolbox’s off just doesn’t look right lol nice truck tho different wheels could change that look but I dunno
Love the new truck
Twin turbo/gauges and new 33 tires leave The paint and interior and giveaway 10,000 instead of 5,000 it’s an Nice clean work truck not a show truck don’t make it something it’s not.
Yes that make sense don’t waste money on Leather interior or paint the person that wins that truck is going to use not look at it going to get dirt and dented put the extra cash in winner pocket
Do the custom inferior!
Also do leather for sure!
Do leather in the interior and put fuel rims on it
where was the truck in 1998
Next giveaway truck ??
Get a Ranch Hand front bumper
Kenda tires any size
Do leather seats!
Put some new tires on it and lift it like 2-4 inches and build it like nasty red mechanically!
🤘🏻🤘🏻
I know someone selling 98 ram 2500 5.9 gas for sale in Indiana
Put a ranchhand on the new truck
throw on a ranch hand bumper!
Du ally is the way to go
Steel bumper
Nasty red 2.0
Turn it into a dually
Ranch hand bumper and leather interior. And don’t lift it