CFMOTO Turn signals come out NICE!
Вставка
- Опубліковано 22 сер 2024
- Thank you for all of your support we hope to keep bringing you more content and we hope to get better and better. If you would like to donate to the channel feel free to PayPal me AT stephenhayes1988@gmail.com OR
paypal.me/RedNeckGarage1988
PLEASE LIKE, SHARE, SUBSCRIBE and CLICK THAT BELL!!!
/ redneckgarage
/ redneckgarage18
/ redneckgara. .
Purishion 10x 3/4"" Round LED
amzn.to/2G8JyZM
LED Flasher
amzn.to/30Icjpx
WINOMO 3 Pin Round Rocker Toggle ON/OFF Waterproof
amzn.to/30GWJe1
300PCS Heat Shrink Connectors, Sopoby Electrical Wire Connectors Crimp Connectors, Insulated Automotive Marine Wire Terminal Kit, Ring Spade Bullet Butt Splices
amzn.to/2RgjToA
16 Gauge 6 Color Primary Wire Combo Pack 100 ft per Roll (600 feet Total) for Automotive Dash Harness Hookup Car Speaker Audio Amplifier Remote Model Train LED Light Wiring
amzn.to/38xK8wt
Hey man I have a 2022 cfmoto 800 uforce, I put in aftermarket lights, aftermarket adjustable relay blinkers work great, however I wanted to hook up hazard light switch, the one in the machine has 2 wires brown/black and gray/black on a 3 pole switch, one pole is capped. The factory switch on cfmoto shows 3 wires, orange, gray, baby blue I would assume 3 pole switch as well. I located were switch in machine is hooked up and also found a connector that has the orange, gray and baby blue wire. I purchased a 5 pin switch but can't for the life of me figure out where I hook it up at?? If you have any suggestions I would be much great full. Thanks
Can you do one of these for the uforce 1000xls and include the break lights…instead of little lights I’m just using led whips
I’ll try
Your the best!
Great job looking good!! Well I used an old insulated extension cord to run my signal lights!! LOL 😆!! Just like my grandpa said do with what you got to make it right...👍 ❤️🤍💙🇺🇸💪👍👍🙌
What ever works and gets the job done for sure. Thank you.
@@R.N.GPerformance Not a problem... 👍👍👍
Like whole setup on signals! They make button lights like that with a flat on one side so can see from side also
Lee Miller thank you.
Nice brother. I like the shifter too
Daniel Ortega thank you. Turned out good. Can’t wait to use that shifter lol
Nice
EXCELLENT!!!! Works like a factory install on rocker switch and front signals. Prewired harness was zip tied to frame. BUT……..I can not locate the wiring harness for signals on rear end. Can you help? Are the rear turn signals part of a factory installed wiring harness? Thank you for putting this together!
The plug that gos to the tail light on each light there is an extra wire those wires are what you use they match the colors on my diagram
@@R.N.GPerformance perfect! This was an outstanding tip and video!
Thank you. I appreciate that.
Where can I find a list of trun signal stuff you ordered from Amazon. I like you videos great ideas for my cfmoto . Thanks
Links are in the description
Really appreciate ur videos they help out a lot peps i know
Im confused a lil under the dash i found the wire colors u showed but i have two sets of the same color wires do i use both sets or just one? I have a 2021 zforce 800ex dont know if it might b different or not
Thank you. Just one either or will work.
Appreciate it thanks
@@heathchittom2417 np
Your videos are great enjoy all the tips you give out very appreciative. Your West Virginia hill billy.
Thank you 🙏
Curious to know if the indicator lights on the dash worked after you completed the wiring or is there a separate step to get those to work I’m going to try and tackle this job this weekend myself.
The Journeymen if you follow my wiring diagram they work.
It’s super easy.
Thanks for all of your videos. Will 18 gauge wire work for these turn signals? I already have some on hand. Thank You.
You’re welcome. Yes it will work for these.
@@R.N.GPerformance Would it be possible to run two switches from the flasher? One for left turn and one for right turn. I do some trail work in Jericho State Park in New Hampshire and it would be nice to turn them both on for 4 way flashers. Thank You again for all that you do.
@@larryjackson5940 just buy the turn signal switch with the 4 way built in on amazon. Do a search you will find it.
@@R.N.GPerformance Thank You
@@larryjackson5940 you’re welcome
Hey Redneck , where did you buy or find the flasher switch ? I did not see it in your kit, is it a CFMOTO flasher or one you bought off Amazon ?
I’m number 1
Sweet!
What about rzr nation! Lol
No thanks loli