Great looking finish! At 81, I can't imagine doing that to a piece of furniture. I'd be in the ground before I got all of the coats on. Always enjoy the content. JimE
Swap out the walnut oil with boiled linseed oil and you have shine juice. Also called friction polish. Used by wood turners, but not with the dust. Apply while spinning the lathe and with the friction of the cloth it dries really fast too. Apply several coats and it comes out nice and smooth.
That's the finish that my grandfather used to for almost everything. He apprenticed as a yacht joiner in the Glasgow shipyards just before World War I.
Our grandfathers considered this mixture “sanding sealer” long before we bought it ready mixed - except they too used boiled linseed oil (much cheaper than walnut oil - and assuming you can even find it).
I’m finishing the a dining room table right now. Shellac alone probably isn’t a good idea because of possible spills. I think I’ll have to do a polyurethane topcoat. But I like the idea of the shellac and sawdust slurry for making a very smooth surface to start with.
0:20 One of the old tricks I learned in wood shop over 30 years ago was to mix the sawdust from your piece with the basic white/yellow wood glue and use that to fill in gaps or defects in the wood surface. Since the sawdust is the same color as the piece it came from when the glue dries clear the filled in portion will be a closer match to the piece and be less noticeable than the black glue.
Nice take on french polish. The criticism of shellac is often that it is not protective enough. I have used it on my dining room table and after a year it still looks great. The good thing is that if it does need some refurbishing you just have to sand it lightly with 320 and apply another coat. As far as the work applying the dining room table is 9 feet by 3 feet and it only took about a half an hour for each coat (top, edges, bottom and legs). The great bonus is that this stuff is totally natural and does not harm to the environment. Food products are coated with shellac and the alcohol evaporates without the environmental damage of most finish solvents. I have moved to using hot hide glue and shellac for almost all my shop projects as I try to reduce my carbon footprint.
I am an allergist. Peanuts are not nuts - they are legumes. Patients with Walnut or Pecan allergies may have issues with Walnut Oil, which is made from Walnuts.
🌲🍀🐾yeah, I liked the hesitation moment right after you dropped the cherry board, before you looked up at the camera 🤣 I know this moment too well😎. Nice finish. Not too shiny. But if it were, you could just go over it lightly with an S.O.S. pad, to make it a more satin like look😉🐾🍀🌲.
I really like tung oil and teak oil. They're fantastic. It seems like walnut oil doesn't make the wood as dark on some projects. I like to test finishes on off cuts beforehand.
What you are promoting here is the tried-and-true French Polish. Use a soft cotton cloth instead of a paper towel for better results. I use mineral oil or boiled linseed oil instead of the walnut oil. Takes a little more time and effort but can't beat the results for shine and smoothness.
Also, each time you apply, the alcohol dissolves some of the previous application, shellac does layer one in another, it becomes part of the previous layer
Plus, people with peanut or other nut allergies are only allergic if taken internally. Typical expose is rare, and even then, not usually more than a mild skin irritation. However, of course, we're on the side of what you think is necessary to protect yourself.
I’m almost 76, I never knew anyone when I was growing up that had peanut allergies! That was almost a given if you ate the school lunch you were going to get some peanut butter, what’s up with that, also gluten allergies! What do you do about knots bleeding through?
It has to do with how peanuts are processed and the mold that grows on them. Take aflatoxin B2 for example, one of the 24 different molds commonly found on peanuts. After toxin B2 is more toxic than nerve gas
You said you could “almost guarantee” your mystery liquid wasn’t urine. Walnut oil definitely looks like urine. My wife is a beginning wood turner, not super versed in finishes yet. She took somebody’s advice to put walnut oil on a spalted maple piece. The color pretty much ruined the look of it and she was pissed! So, for her walnut oil IS urine.
Incorrect, walnuts are nuts. In botany, nuts are a type of dry fruit with a single seed, a hard shell, and a protective husk. Walnuts meet this definition.
Almonds are members of the peach family. My wife has a nut allergy, no walnuts, macadamia or Brazil nuts. Peanuts are legumes and almonds being from the peach family are fine for her .
Great looking finish!
At 81, I can't imagine doing that to a piece of furniture. I'd be in the ground before I got all of the coats on.
Always enjoy the content. JimE
You have become my go-to for finishing. My last project was a small end table, and your process on the boxes turned out amazing!
Swap out the walnut oil with boiled linseed oil and you have shine juice. Also called friction polish. Used by wood turners, but not with the dust. Apply while spinning the lathe and with the friction of the cloth it dries really fast too. Apply several coats and it comes out nice and smooth.
I've done it plenty of time and it gets beautiful results for sure👍
That's the finish that my grandfather used to for almost everything. He apprenticed as a yacht joiner in the Glasgow shipyards just before World War I.
Our grandfathers considered this mixture “sanding sealer” long before we bought it ready mixed - except they too used boiled linseed oil (much cheaper than walnut oil - and assuming you can even find it).
@@G.I.JeffsWorkbench Yes, my grandfather used linseed oil.
Thanks for the tip with the sand paper now I'm gonna that all the time
I smack my leg with the sandpaper too. You're not alone
Great tip thanks for sharing. It looks amazing definitely going to try this
Great video. 🎉
Really beautiful finish, Billy! 😃
Thanks a bunch for all the tips!
Stay safe there with your family! 🖖😊
I'm sure you've tried tung oil (my go to). What do you like about Walnut over (pure) Tung? or Linseed fot that matter?
By the way, I like your technique for French polish. Kind of takes some of the mystery out of it makes it more straightforward.
Hi there to a fellow clutz. I do stuff like this all the time. I told my kids that I feel like I am living in a Jerry Lewis movie.
I’m finishing the a dining room table right now. Shellac alone probably isn’t a good idea because of possible spills. I think I’ll have to do a polyurethane topcoat. But I like the idea of the shellac and sawdust slurry for making a very smooth surface to start with.
Wouldnt the paper towel leave fibers in the finish?
Hi Good Polishing Tip Great VIDEO
0:20 One of the old tricks I learned in wood shop over 30 years ago was to mix the sawdust from your piece with the basic white/yellow wood glue and use that to fill in gaps or defects in the wood surface. Since the sawdust is the same color as the piece it came from when the glue dries clear the filled in portion will be a closer match to the piece and be less noticeable than the black glue.
Nice
Nice take on french polish. The criticism of shellac is often that it is not protective enough. I have used it on my dining room table and after a year it still looks great. The good thing is that if it does need some refurbishing you just have to sand it lightly with 320 and apply another coat. As far as the work applying the dining room table is 9 feet by 3 feet and it only took about a half an hour for each coat (top, edges, bottom and legs). The great bonus is that this stuff is totally natural and does not harm to the environment. Food products are coated with shellac and the alcohol evaporates without the environmental damage of most finish solvents. I have moved to using hot hide glue and shellac for almost all my shop projects as I try to reduce my carbon footprint.
you use straight up shellac> what kinda cut and which color flakes?
Would this work on rattan? Looking for a good finish for a bar stool.
I am an allergist. Peanuts are not nuts - they are legumes. Patients with Walnut or Pecan allergies may have issues with Walnut Oil, which is made from Walnuts.
🌲🍀🐾yeah, I liked the hesitation moment right after you dropped the cherry board, before you looked up at the camera 🤣 I know this moment too well😎. Nice finish. Not too shiny. But if it were, you could just go over it lightly with an S.O.S. pad, to make it a more satin like look😉🐾🍀🌲.
Walnut oil? The same I have in my Kitchen Cabnet for food use?
@@kevinthomas8667 no, not the same.. treated in some way to prevent it from going rancid
Is there a reason that you like walnut oil over something like tung oil? I find that walnut oil is kind of soft when it hardens.
I really like tung oil and teak oil. They're fantastic. It seems like walnut oil doesn't make the wood as dark on some projects. I like to test finishes on off cuts beforehand.
What you are promoting here is the tried-and-true French Polish. Use a soft cotton cloth instead of a paper towel for better results. I use mineral oil or boiled linseed oil instead of the walnut oil. Takes a little more time and effort but can't beat the results for shine and smoothness.
Also, each time you apply, the alcohol dissolves some of the previous application, shellac does layer one in another, it becomes part of the previous layer
For the last forty years I have used French Polish. I prefer Raw Linseed oil as my lubricant. Try it and you’ll see why!
What is the total cure time of walnut oil? Seems like a lot of work for the “perfect” finish.
Shellac alone is perfect for certain surfaces.
I do this with poly, Danish oil and thinner.
Nice Frank Zappa reference......
I actually laughed out loud when the cups went flying. So me... beautiful finish on the wood.
Fortune teller...foresees the future!
Plus, people with peanut or other nut allergies are only allergic if taken internally. Typical expose is rare, and even then, not usually more than a mild skin irritation. However, of course, we're on the side of what you think is necessary to protect yourself.
You are doing a form of french polishing. It works even better with extra fine pumice powder to fill the pores
You should check out the English Polisher
Same technique or similar method to French Polish
Peanut allergies so can’t use walnut oil. Lactose intolerant so can’t use cheese cloth. 😂
:-)
I’m almost 76, I never knew anyone when I was growing up that had peanut allergies! That was almost a given if you ate the school lunch you were going to get some peanut butter, what’s up with that, also gluten allergies! What do you do about knots bleeding through?
It has to do with how peanuts are processed and the mold that grows on them. Take aflatoxin B2 for example, one of the 24 different molds commonly found on peanuts. After toxin B2 is more toxic than nerve gas
You said you could “almost guarantee” your mystery liquid wasn’t urine. Walnut oil definitely looks like urine. My wife is a beginning wood turner, not super versed in finishes yet. She took somebody’s advice to put walnut oil on a spalted maple piece. The color pretty much ruined the look of it and she was pissed! So, for her walnut oil IS urine.
How did it ruin it? Too dark
@ too dark and too yellow.
@@iandodd7828 so something like untinted danish oil wouldnhave qorked better? I am far from an expert but most oils seems to have an amber tint.
@ yes, untinted Danish, or even boiled linseed oil, would have given her the look she would have liked.
No mayonnaise?
Walnuts are not nuts. They are the seed of a stone fruit. Similar to peaches and avocados.
Incorrect, walnuts are nuts.
In botany, nuts are a type of dry fruit with a single seed, a hard shell, and a protective husk. Walnuts meet this definition.
Almonds are members of the peach family.
My wife has a nut allergy, no walnuts, macadamia or Brazil nuts.
Peanuts are legumes and almonds being from the peach family are fine for her .
I missed the secret ingredient reveal. If it turned out to be urine, I'm going to be pissed.
😂
As soon as you broke out the cheese cloth, I thought French polish. Too predictable lol.
Bill