Gracias el video muy practico mi duda es usaste una nueva ic del touch o usaste la misma Otra consulta los ic del touch son las mismas entre los modelos c/g/s en los iphone 5 para poder usar la ic de otros medelos
Larry Johnson question for you regarding touch on iPhone 5s: Iphone droped and after that touch is unresponsive. LCD is working fine. Which of ICs should I reball/reflow/replace? It is possible to measure somehow or I don't know? I try new LCD (for which I sure is okay) and of cource doesn't work.
Hello Larry , Nice Job !!! whats the name of the grey paste you use to reballin BGA ? And were did you bought the " stencil" for reballing ? pls thank you
Sorry for bothering, you seem like a true pro, what hot air station do u recommend for bga iphone work removal. ive heard there are alot of bad ones out there, but i dont want to spend over 600$US for a hakko.
with plomb or without plomb ? this one is ok ? --->100g AMTECH NC- 559 -ASM plomb No Clean Clean Flux Solder Solder Paste ? thank you ?? and whats the name the GREY PAST you use to put on gba for rabaling pls ?
My iPhone 5s new screen + lcd does work, but randomly is unresponsive or touches on it's own. Swapped screens but same issue, is it the U15 or BCM5976 IC ??
have iphone 5s with problems with HOME botton click itself up but touch ID works any solution for that or have to replace the all flex any suggestion ill appreciate it great work
The IC in the video is "Sage" and is not the same IC used on the iP6/iP6+. The touch IC's use on the 6 and 6+ would be Meson and Cumulus. Cumulus is the same on the iPhone 5c/5s/6/6+. There are 2 touch IC's used on each model phone.
Good job man! I have 5S and touch screen working when I wake up the phone. I use the phone normally but after 2 or 3 minutes later, its going crazy. Let me explain :) When you holding your finger 1 or 2 cm away from the screen, screen goes like touching the screen but I never touched it. I twists little bit phone from edge of the phone, it working 20 or 30 minutes more. I already replace the touchscreen completely but problem not solved. Can you advise how can I fix this issue from my wife's phone? Thank you.
I love the ending, broken screen after all that work :D
mobile treck new track solusion
Did anyone else start to feel the suspense at 17:20 ?
Gracias el video muy practico mi duda es usaste una nueva ic del touch o usaste la misma
Otra consulta los ic del touch son las mismas entre los modelos c/g/s en los iphone 5 para poder usar la ic de otros medelos
Larry , congratulations , you work very, very well , will open a assists in Brazil , lol ...
really good job ... u am using the same hakko station .. what temperature in celsium u r operating for removing and soldering back the chip ?
390c
Excellent work. Which is the paste to make the reballing?
You can use either leaded or lead free paste.
جزاک الله خیرا باڕک الله فیک
how can I know the microscope model you use, really need one but do not know what I get. thank you
AmScope SM-4TPZ
What's that fluid u puts on it on at 2:21
Larry Johnson question for you regarding touch on iPhone 5s: Iphone droped and after that touch is unresponsive. LCD is working fine. Which of ICs should I reball/reflow/replace? It is possible to measure somehow or I don't know? I try new LCD (for which I sure is okay) and of cource doesn't work.
Hello Larry ,
Nice Job !!! whats the name of the grey paste you use to reballin BGA ? And were did you bought the " stencil" for reballing ? pls
thank you
Hi mark , thx for your videos, just a quick question chestnut also make a problem for touch?
Sorry for bothering, you seem like a true pro, what hot air station do u recommend for bga iphone work removal. ive heard there are alot of bad ones out there, but i dont want to spend over 600$US for a hakko.
+Pero Hakko makes very good units
I can't do like you.You're good skill
Good Job Man!!
Please what flux use for cleaning excessive tin?
I use Amtec 559 No-Clean Tacky Flux
with plomb or without plomb ?
this one is ok ? --->100g AMTECH NC- 559 -ASM plomb No Clean Clean Flux Solder Solder Paste
? thank you ??
and whats the name the GREY PAST you use to put on gba for rabaling pls ?
Really great job! Thanks for the upload.
Which gum u using to remove the IC To all iPhone
My iPhone 5s new screen + lcd does work, but randomly is unresponsive or touches on it's own. Swapped screens but same issue, is it the U15 or BCM5976 IC ??
which iron you using...??
Very interesting video
have iphone 5s with problems with HOME botton click itself up but touch ID works any solution for that or have to replace the all flex any suggestion ill appreciate it great work
What kind of mat are you using? The one that looks like a fiberglass weave?
Also curious to know what temp you are using on your hot air?
I normally run 390/400c on my Hakko 802
this touch ic is the same for iphone 5s and iphone 6 plus? can i use the iphone 5s touch ic in an iphone 6 plus? thanks
The IC in the video is "Sage" and is not the same IC used on the iP6/iP6+. The touch IC's use on the 6 and 6+ would be Meson and Cumulus. Cumulus is the same on the iPhone 5c/5s/6/6+. There are 2 touch IC's used on each model phone.
Man how did you gain so much knowledge
about iphone mobo's....apple is so secretive.
Trial and error and linking up with good friends that do the same type of work.
Awesome, I'm about to attempt to change my first nand chip on a 6 plus. Any tips?
Don't do it.
great video, it would be nice if you can explain some of the stuff you're doing?:)
Hey! What is the price for regular client ?
Shoot me a message.
What is your recording gear ?
hey what would the cost be to fixed the Touch IC
What level of air did you put to the station?
Température optimal 350° et pour le débit Air 25
hi, i was suffered with pcb pad had broken, is it my temperature not enough hot?
what temperature of tge heatgun do you use for dismantle the ic?
390c
you use conductive flux or not?
Conductive Flux? I use Amtec 559 No-Clean Tacky Flux
Good job man! I have 5S and touch screen working when I wake up the phone.
I use the phone normally but after 2 or 3 minutes later, its going crazy. Let me explain :) When you holding your finger 1 or 2 cm away from the screen, screen goes like touching the screen but I never touched it.
I twists little bit phone from edge of the phone, it working 20 or 30 minutes more. I already replace the touchscreen completely but problem not solved.
Can you advise how can I fix this issue from my wife's phone?
Thank you.
It is the touch IC on the phone that is bad. Not as common on the 5c and 5s, but it doesn't happen to those models as well.
What this IC compatible to iPhone se..???please talk to me
Can the touch ic go bad after water damage
what type of that orange color ?
Kapton Tape
thanks
hey Larry I cannot update or restore iPhone5s. the repair man says it is ic problem. what is my chances to use that phone
What restore error?
+Larry Johnson error 3 while restoring
hi Larry where are you from ?
Tennessee USA
no black resin under this chip? thx!
Ajudou muito parceiro obrigado.
what does sage mean?
temp and air flow??
Hi, What is the symptoms of a bad U15 chip? Thanks
Touch not working or intermediate touch.
wao verry good ma sha Allah
iPhone repair in kolkata, can someone help?
materials?
great work
N mostra aonde se localiza o ci
👍👍👍👍
I was removing the IC from the wifi, and ended up leaving the connectors that should be fixed on the board, how can I solve it?
NYCOLAS FONSECA DE MATOS how many pads? Will need to make jumpers.
I have a problem on the touchscreen, but repairman say its ic lcd, after repair success but only just stay ix on 24H, after this error again,
If touch completely stops working is there any chance its the lcd before having to do all this?
Absolutely check with a new LCD before attempting this.
good job
Link del flux
Good!!
my i phone 5 touch has not working
ciò che è un problema
Very interesting video