You know when you're researching on UA-cam to figure out how to do something and you get lucky and run across the perfect video? Well here you go. Thank you, Finn, good job.
Just happened to be scrolling on UA-cam when you commented. Thanks for the kind words. I’m glad the video helped you. If you have any questions about it feel free to ask.
Hi there Finn wow just what I was looking for what a terrific video. I came in your shop last summer to buy a few supplies and will be back this summer. I am tackling my Indian Scout seat and want to tool the leather and lace the seams. I hope to see you then. Thanks for the lesson in leather work!!!
Thank you, great video! Would even consider doing other seats like contoured lawnmowers, tractor seats and possibly office chair seat & backs? Just checking. Thanks again, I learned a lot.
Thank you for sharing your knowledge and thank you also to the YT algorhythm for posting this on my feed. This will be incredibly useful to me as a step by step guide. Thanks again 🙏❣
Totally agree with this. Ive been watching alot of atomic autoworks videos. And this guy goes into better detail about what he is doing. Wold love to see someone talk about the different foams and when to use what….rebond, open cell, closed cell, medium density, heavy density, sew foams, dry foams, etc….
Nice job, I would have thrown down a blanket or piece of foam over the bench while stapling and move any scissors or sharp objects…. I learned the hard way
To be honest I made mine years ago. For some other purpose which I don’t remember as well, but I found it worked well for this and I’ve been using it ever since. I took a 1/2” round steel rod and filed the tip into a “V” shaped cutting edge. Similar to a chisel edge. It doesn’t have to be too sharp to cut the leather. You might be able to use a short piece of small angle iron as well and sharpen one end.
@finnsleathershop4589 Thanks. Thought it might be custom. I know there are tailor's notching pliers but they are for clothing weight stuff. Your device is genius being so efficient.
Thanks. Glad you liked the video. As for the supplies, I get the Elmers spray glue from my local hardware store and the cambric from an upholstery supply store. You could probably also find it from an online source like Amazon. It also is sometimes called “spunbound” fabric. Be sure you get the white so you can see through it.
@@azcharlie2009depending on application the sailmakers tape is fantastic stuff. Not always great with leather under tension. But it's a great tool to have in the box
Do you do custom work on seats? I own a Royal Enfield Meteor 350 and would like it lowered with the back hugging the lower back? Or do you have someone you would recommend in San Diego? Very much enjoyed watching your work, thank you. 😎
Great video! Where do you get that white cambric material? Also my stapler looks much like yours. It was given to me by my grandfather who did upholstery work all his life! Wish he had taught me his trade.
I don’t have any videos on that but when I need to shape foam I’ve had success using an air powered die grinder with a sanding disk. It’s a bit hard to control at first but it really smooths out and shaves away the foam well.
Should be able to. Most any stitch you can do on a machine can be hand sewn. It just takes more time. Also when hand sewing soft leather you need to be careful not to pull the threads too tight and end up gathering the material too much.
Couple more questions. It looks like your using a walking foot machine? If you are do you use any kind of walking foot made for leather or is it the standard foot? Also if practice this technique with vinyl will it mimic how the leather would work so I can perfect the skill before spending $$$ on leather?
I’m using a standard walking foot on a Consew 206RB-5 machine. A basic leather industrial machine. The cambric pattern making technique should work the same for most any material. Certainly leather and vinyl. The cambric has just a little stretch to it as does leather and vinyl. The cambric is just an easy way to find out what a curvy surface looks like when flattened out.
Thank you so much for your replies! I have a nice nakajima industrial walking foot sewing machine i picked up. Still learning. I can't wait to try this to cover my heritage softail seats! I have some used leather for practice i skinned of a couch setting by the side of the road! Free is good lol! Great practice material!
I’m not sure what to call the type of staples. They are just the ones that fit in my old air powered upholstery staple gun. I usually use the 1/2” length so they are sure to go in far enough to hold well however I sometimes use a 1/4” where the foam is thin so they don’t poke thru the top side of the leather.
Not sure offhand. I’d have to check. It’s been at my shop longer than I can remember. Don’t even know where I got it. Probably in a box of old tools that were donated to my shop.
You know when you're researching on UA-cam to figure out how to do something and you get lucky and run across the perfect video? Well here you go. Thank you, Finn, good job.
Just happened to be scrolling on UA-cam when you commented. Thanks for the kind words. I’m glad the video helped you. If you have any questions about it feel free to ask.
@@finnsleathershop4589 Will do, thanks.
A Master of his craft always makes it look so easy.
Thoroughly enjoyed your video, thank you.
From Chris in England 🙂
This is a true art in American craftsmanship. Thank you kindly for sharing.
It's so hard to find a good teacher especially in pattern making. Thank you for the video, you are truly a master!
5* lesson, thanks 👍🏻
Great video and work manship
Fantastic job 👏 been to morro bay driving from san Francisco to La .little stop over lovely place thanks from Scotland 🏴
You, Good sir. Have given me the confidence to attempt the recovering of my Moto-Guzzi Jackyl saddle. Thank you so very much. Greetings from Detroit!
Wow. Best video about upholstering a buddyseat I found on the net! Thank you for sharing some of the tricks of the trade!
I just finished my own seat. Thanks for the good instructions.
Hi there Finn wow just what I was looking for what a terrific video. I came in your shop last summer to buy a few supplies and will be back this summer. I am tackling my Indian Scout seat and want to tool the leather and lace the seams. I hope to see you then. Thanks for the lesson in leather work!!!
Thank you, great video! Would even consider doing other seats like contoured lawnmowers, tractor seats and possibly office chair seat & backs? Just checking. Thanks again, I learned a lot.
Thank you for sharing your knowledge and thank you also to the YT algorhythm for posting this on my feed.
This will be incredibly useful to me as a step by step guide.
Thanks again 🙏❣
Quality custom work as always Finn! Doing my best to get by and see ya ASAP! Stay safe Brother! 😎👍🇺🇲
Awesome. Very apreciated!
Thank you Sir for uploading very informative Content.
Subscribed & 👍👍👍
Best video I have seen. Thanks for sharing. I really want to learn this craft.
One of the best tutorials I've seen, and I've seen a lot
Totally agree with this. Ive been watching alot of atomic autoworks videos. And this guy goes into better detail about what he is doing. Wold love to see someone talk about the different foams and when to use what….rebond, open cell, closed cell, medium density, heavy density, sew foams, dry foams, etc….
Great work!
You are the BEST.!!!!!
Great a job👍
Great info, about to do my first seat 😃😃👍
Nice work,thanks for the tutorial.
Nice job, I would have thrown down a blanket or piece of foam over the bench while stapling and move any scissors or sharp objects…. I learned the hard way
fantastic. What a great teacher.
Some great tips here, thank you.
Amazing work, thank you so much
Great video. Clear and complete!
Can you advise as to where a v punch like yours can be obtained? That thing is such a timesaver.
To be honest I made mine years ago. For some other purpose which I don’t remember as well, but I found it worked well for this and I’ve been using it ever since. I took a 1/2” round steel rod and filed the tip into a “V” shaped cutting edge. Similar to a chisel edge. It doesn’t have to be too sharp to cut the leather. You might be able to use a short piece of small angle iron as well and sharpen one end.
@finnsleathershop4589 Thanks. Thought it might be custom. I know there are tailor's notching pliers but they are for clothing weight stuff. Your device is genius being so efficient.
Made it look so easy. I'm covering my scooter seat in the photo
Great video.. You did a amazing job explaining how to do every step. I just have one question, do you know the thickness of the leather you used?
It was a soft upholstery weight leather so I’d say it was in the 1.5-3oz range. I don’t remember exactly which hide I used on this seat.
Great tutorial sir. Thank you.👍
Looks awesome
The foam on that seat was shot. Should have been rebuilt then covered.
This is one of the best pattern videos I've found yet! I curious where you buy your materials, ie. the cambric fabric, and the elmer's pray glue.
Thanks. Glad you liked the video.
As for the supplies, I get the Elmers spray glue from my local hardware store and the cambric from an upholstery supply store. You could probably also find it from an online source like Amazon. It also is sometimes called “spunbound” fabric. Be sure you get the white so you can see through it.
@@finnsleathershop4589 Thanks for the quick reply! A suggestion: Instead of gluing the seams together, try Sailrite seamstick.
@@azcharlie2009depending on application the sailmakers tape is fantastic stuff. Not always great with leather under tension. But it's a great tool to have in the box
Thank's for that very good vidéo!!!
Great job! Thank you.
Great work. Next time make the video horizontal plz.
Good. Video. Was thinking of subscribing but I see your not making videos.
What about plastic under the leather? On a rainy day this seat is going to be like sitting on a wet sponge.
uh yeah this is amazing. ty sir
Do you do custom work on seats? I own a Royal Enfield Meteor 350 and would like it lowered with the back hugging the lower back? Or do you have someone you would recommend in San Diego? Very much enjoyed watching your work, thank you. 😎
Nice job
This is not this man's first rodeo.
legit have that same old ass gun to shoot aluminum staples for laminate countertops. it dicks me too
Master of his trade
Multa munca pt un lucru simplu
Congratuoechon bro super super.🎉🎉🎉🎉🎉
Good job
Are you still playing with the Doobie Brothers?
Great video! Where do you get that white cambric material? Also my stapler looks much like yours. It was given to me by my grandfather who did upholstery work all his life! Wish he had taught me his trade.
I get mine at an upholstery supply store near me. Might be able to find some online otherwise.
60” Spunbond 150 Series White Fabric (5 Yards) www.amazon.com/dp/B087N7YB5M/ref=cm_sw_r_cp_api_i_SXWK9W7NQ7TMBPB1JWZY
Thank you so much! Here in springfield MO there is absolutely nowhere to get upholstery supply stuff anymore!
any videos on how to sculpt the foam of the seat? i’m just starting out in upholstery.
I don’t have any videos on that but when I need to shape foam I’ve had success using an air powered die grinder with a sanding disk. It’s a bit hard to control at first but it really smooths out and shaves away the foam well.
@@finnsleathershop4589 thanks i’ll try it out.
Thank you very much! I know it would be time consuming but do you think it can be stitched by hand with a speedy stitcher?
Should be able to. Most any stitch you can do on a machine can be hand sewn. It just takes more time. Also when hand sewing soft leather you need to be careful not to pull the threads too tight and end up gathering the material too much.
Couple more questions. It looks like your using a walking foot machine? If you are do you use any kind of walking foot made for leather or is it the standard foot? Also if practice this technique with vinyl will it mimic how the leather would work so I can perfect the skill before spending $$$ on leather?
I’m using a standard walking foot on a Consew 206RB-5 machine. A basic leather industrial machine. The cambric pattern making technique should work the same for most any material. Certainly leather and vinyl. The cambric has just a little stretch to it as does leather and vinyl. The cambric is just an easy way to find out what a curvy surface looks like when flattened out.
Thank you so much for your replies! I have a nice nakajima industrial walking foot sewing machine i picked up. Still learning. I can't wait to try this to cover my heritage softail seats! I have some used leather for practice i skinned of a couch setting by the side of the road! Free is good lol! Great practice material!
hopefully he upgraded the audio...sounds like he's in a fish tank with a respirator
Dam used about 500 staples
At first I thought it is George Michael...😉
🤣🤣
What kind of staples are you using and how long are they?
I’m not sure what to call the type of staples. They are just the ones that fit in my old air powered upholstery staple gun. I usually use the 1/2” length so they are sure to go in far enough to hold well however I sometimes use a 1/4” where the foam is thin so they don’t poke thru the top side of the leather.
@@finnsleathershop4589 Thanks
What brand staple puller?
Not sure offhand. I’d have to check. It’s been at my shop longer than I can remember. Don’t even know where I got it. Probably in a box of old tools that were donated to my shop.
1
Man you are an excellent teacher picked up some good tips thanks #torah57mitch