How To Replace Rear Shocks 2004-10 Toyota Sienna
Вставка
- Опубліковано 11 вер 2024
- Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/KYSH...
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2004-10 Toyota Sienna.
• Check here for more videos on the 2004-2010 Toyota Sienna: • Toyota Sienna 2004-201...
This process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna
Tools you will need:
• 17mm Wrench 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Silicone Spray
• 6mm Allen Wrench 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Toyota Sienna 2004-2010 2nd Generation: • Toyota Sienna 2004-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Socket size, torque specs....You showed everything. I felt like I knew what I was doing when I followed your directions. Thank you for the video!
This and the front strut video are the best how-to videos I've ever seen. Period.
I didnt care for the body style of this van, but I love how reliable it is and how easy it is to work on.
Just like your front strut assembly video, this has everything needed and nothing unnecessary. Again, thank you for your time and effort.
Great video! Without your help, I probably could not have replaced the rear shocks on my 2010 Sienna. Thank you!
I don’t know what’s better: The directions were very clear or this guy sounds like Toby Flenderson from The Office.
Nice very awesome just like my friend would have done except I would have to do 1 after being shown thank you
Quick List:
Length of shock absorber: 2WD DRIVE TYPE: 234 mm (9.22 in.) 4WD DRIVE TYPE: 258 mm (10.16 in.)
Socket 21mm - 77 ft-lbs ?? 76 on manual
Socket 19mm - 85 ft-lbs ?? confirmed on manual
Ratchet wrench 17mm - 22 ft-lbs
Allen 6mm
Note: www.tsienna.net/installation-1068.html
Great video. I changed one of mine in about 20 minutes. I did not find any need to remove the wheel though.
20 minutes?! That's hugely impressive I thought this was going to be a bit more difficult but looks like it was pretty well thought out.
This is great! Thanks!
Fantastic video. Everything I needed to know!
Thank you for this video really helped me
Thanks for showing
Very helpful. Thanks.
Is the rear shocks are they the same ones? Like no right or left one? I'm trying to get for my Sienna to replace it.
Good job bro thank
Nice 👍
Is 2002 basically the same process?
NO! You'll break that lower bolt if you try to torque it to 85 pounds!
85 FOOT POUNDS! Y
OU GOT TO BE KIDDING! SOMETHING WILL BREAK!
As manual, yes.